A novel UV-emitting phosphor: Li6CaB3O8.5:Pb

Pure Li₆CaB₃O_8.5 and Li₆Ca_1−xPb_xB₃O_8.5 (0.005≤x≤0.04) materials were prepared by a solution combustion synthesis method. The phase of synthesized materials was determined using the powder XRD and FTIR. The synthesized materials were investigated using spectrofluorometer at room temperature. The emission and excitation bands of the synthesized phosphors were observed at 307 and 268 nm, respectively. The dependence of the emission intensity on the Pb²⁺ concentration for the Li₆Ca_1−xPb_xB₃O_8.5 (0.005≤x≤0.04) was studied and observed that the optimum concentration of Pb²⁺ in phosphor is 0.01 mol. The Stokes shift of the synthesized phosphor was calculated to be 4740 cm^-1.     

Photoluminescence properties and effects of dopant concentration in Bi2ZnB2O7:Tb phosphor

A novel green phosphor, Tb³⁺ doped Bi₂ZnB₂O₇ was synthesized by conventional solid state reaction method. The phase of synthesized materials was determined using the XRD, DTA/TG and FTIR. The photoluminescence characteristics were investigated using spectrofluorometer at room temperature. Bi₂ZnB₂O₇:Tb³⁺ phosphors excited by 270 nm and 485 nm wavelengths. The emission spectra were composed of three bands, in which the dominated emission of green luminescence Bi₂ZnB₂O₇:Tb³⁺ attributed to the transition ⁵D₄ → ⁷F₅ is centered at 546 nm. The dependence of the emission intensity on the Tb³⁺ concentration for the Bi_2−xTb_xZnB₂O₇ (0.01 ≤ x ≤ 0.15) was studied and observed that the optimum concentration of Tb³⁺ in phosphor was 13 mol% for the highest emission intensity at 546 nm.     

A study on the luminescence properties of CaAl2B2O7:Eu phosphor

The blue-emitting CaAl₂B₂O₇:Eu²⁺ phosphor was prepared at 800 °C by a modified solid-state reaction. The results of X-ray powder diffraction (XRD) analysis confirmed the formation of CaAl₂B₂O₇:Eu²⁺. Photoluminescence (PL) spectroscopy showed that the phosphor could be excited efficiently by UV-vis light from 250 to 410 nm, and exhibit blue emission (460 nm). The emission intensity of CaAl₂B₂O₇:Eu²⁺ phosphor varies with the increase of Eu²⁺concentration. The mechanism of resonance-type energy transfer from Eu²⁺ to Eu²⁺ was established to be electric multipole-multipole interaction. TEM images showed that the grain size of CaAl₂B₂O₇:Eu²⁺ is about 45 nm, which is in full agreement with the theoretical calculation data from the XRD patterns.     

Synthesis and crystal structures and luminescent properties of divalent europium-doped Ba2ZnSi2O7 and BaZn2Si2O7

The monoclinic Ba₂ZnSi₂O₇:Eu²⁺ blue-green-emitting phosphor and the orthorhombic BaZn₂Si₂O₇:Eu²⁺ green-emitting phosphor were prepared by combustion-assisted synthesis method as the fluorescent materials for ultraviolet-light-emitting diodes (UV-LEDs) performed as a light source. The crystallinity and luminescence were investigated using X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy. Pure monoclinic Ba₂ZnSi₂O₇ and orthorhombic BaZn₂Si₂O₇ crystallize completely at 1100 °C. The doped Eu²⁺ ions did not cause any significant change in the host structure. The emission spectra presented an emission position red shift of up to 16 nm from Ba₂ZnSi₂O₇:Eu²⁺ to BaZn₂Si₂O₇:Eu²⁺. The excitation spectra of Ba₂ZnSi₂O₇:Eu²⁺ and BaZn₂Si₂O₇:Eu²⁺ were broad-banding, extending from 260 to 465 nm, which match the emission of UV-LEDs.     

Photoluminescence and phosphorescence properties of MAl2O4:Eu, Dy (M=Ca, Ba, Sr) phosphors prepared at an initiating combustion temperature of 500 °C

Eu²⁺ and Dy³⁺ co-doped calcium aluminate, barium aluminate and strontium aluminate phosphors were synthesized at an initiating combustion temperature of 500 °C using urea as an organic fuel. The crystallinity of the phosphors was investigated by using X-ray diffraction (XRD) and the morphology was determined by a scanning electron microscope (SEM). The low temperature monoclinic structure for both CaAl₂O₄ and SrAl₂O₄ and the hexagonal structure of BaAl₂O₄ were observed. The effect of the host materials on the photoluminescence (PL) and phosphorescence properties were investigated by using a He-Cd Laser and a Cary Eclipse fluorescence spectrophotometer, respectively. The broad band emission spectra observed at 449 nm for CaAl₂O₄:Eu²⁺, Dy³⁺, 450 nm (with a shoulder-peak at 500 nm) for BaAl₂O₄:Eu²⁺, Dy³⁺ and 528 nm for SrAl₂O₄:Eu²⁺, Dy³⁺ are attributed to the 4f⁶5d¹ to 4f⁷ transition in the Eu²⁺ ion in the different hosts.     

Luminescent properties of SrAl2B2O7: Ce, Tb

By using metal nitrates as starting materials, SrAl₂B₂O₇: Tb³⁺ and SrAl₂B₂O₇: Ce³⁺, Tb³⁺ powder phosphors were prepared by sol-gel method. X-ray diffraction (XRD), photoluminescence excitation and emission, as well as kinetic decays were employed to characterize the resulting samples. The results show that energy transfers from Ce³⁺ to Tb³⁺ ions. The emission intensity of Tb³⁺ ions in SrAl₂B₂O₇ could be greatly intensified when Ce³⁺ ions are doped into SrAl₂B₂O₇: Tb³⁺. The decay times of SrAl₂B₂O₇: Tb³⁺ were prolonged when Ce³⁺ ions were doped. The doping of Ce³⁺ ions not only improved the luminescent intensity, but also made the materials gets stable luminescent properties.     

Effect of Ca and Sr alkaline earth ions on luminescence properties of BaAl12O19:Eu nanophosphor

Nanosized barium aluminate materials was doped by divalent cations (Ca²⁺, Sr²⁺) and Eu²⁺ having nominal compositions Ba_1−xMxAl₁₂O₁₉:Eu (M=Ca and Sr) (x=0.1-0.5), were synthesized by the combustion method. These phosphors were characterized by XRD, scanning electron microscopy-energy-dispersive spectrometry (SEM-EDS) and photoluminescence measurement. The photoluminescence characterization showed the presence of Eu ion in divalent form which gave emission bands peaking at 444 nm for the 320 nm excitation (solid-state lighting excitation), while for 254 nm it gave the same emission wavelength of low intensity (1.5 times) compared to 320 nm excitation. It was also observed that alkaline earth metal (Ca²⁺ and Sr²⁺) dopants increase the intensity of Eu²⁺ ion in BaAl₁₂O₁₉ lattice, thus this phosphor may be useful for solid-state lighting.     

Effect of doping on the luminescence properties of Li2B4O7

In this work, we have investigated the influence of doping agents on the luminescence properties of multiply doped Li₂B₄O₇ and the temperature lag between TSL materials and the heating element. The results of thermoluminescence studies show that the Ag doping leads to the appearance of a new glow curve peak at 165 °C and the increasing sensitivity of Li₂B₄O₇:Cu,Ag,P is correlated with copper and phosphate concentrations. Under the excitation at 245 nm the emission spectra show maxima at 365 and 450 nm in the ceramic, crystal and glass. The low energy shift in the latter system might be related to the local structural distortion in the glass around Cu⁺ ions.     

Thermoluminescent and stuctural properties of BaAl2O4:Eu,Nd,Gdphosphors prepared by combustion method

BaAl₂O₄:Eu²⁺,Nd³⁺,Gd³⁺ phosphors were prepared by a combustion method at different initiating temperatures (400–1200 °C), using urea as a comburent. The powders were annealed at different temperatures in the range of 400–1100 °C for 3 h. X-ray diffraction data show that the crystallinity of the BaAl₂O₄ structure greatly improved with increasing annealing temperature. Blue-green photoluminescence, with persistent/long afterglow, was observed at 498 nm. This emission was attributed to the 4f⁶5d¹–4f⁷ transitions of Eu²⁺ ions. The phosphorescence decay curves were obtained by irradiating the samples with a 365 nm UV light. The glow curves of the as-prepared and the annealed samples were investigated in this study. The thermoluminescent (TL) glow peaks of the samples prepared at 600 °C and 1200 °C were both stable at ∼72 °C suggesting that the traps responsible for the bands were fixed at this position irrespective of annealing temperature. These bands are at a similar position, which suggests that the traps responsible for these bands are similar. The rate of decay of the sample annealed at 600 °C was faster than that of the sample prepared at 1200 °C.     

BaAl12O19:Mn green emitting nanophosphor for PDP application synthesized by solution combustion method and its Vacuum Ultra-Violet Photoluminescence Characteristics

Nanostructured BaAl₁₂O₁₉:Mn²⁺ phosphor particles of nano-rod morphology with diameter 40-100 nm and length up to 200-600 nm has been synthesized by solution combustion method and its photoluminescence characteristics have been studied by Vacuum Ultra-Violet Photoluminescence spectrometer (VUVPL) under 147 nm excitation. The crystallographic phase purity of BaAl₁₂O₁₉:Mn²⁺ nanostructured phosphor particle synthesized by solution combustion approach is confirmed by X-ray diffraction (XRD). The broadening of XRD diffraction peaks indicates nanocrystalline nature of particles present in powder. The emission spectrum of BaAl₁₂O₁₉:Mn²⁺ nanophosphor on 147 nm excitation consists of a wide green band with a peak at about 515 nm, which is due to a 3d⁵ (⁴T_1g)-3d⁵ (⁶A_1g) transition corresponds of Mn²⁺ ions. It is found that the concentration quenching is obtained when Mn²⁺ content (x) is 0.05 in BaAl₁₂O₁₉:xMn²⁺ nanophosphor on 147 nm excitation. The decay time of 3d⁵ (⁴T_1 g)-3d⁵ (⁶A_1 g) transition of Mn²⁺ ions at 147 nm excitation is about 23 ms for BaAl₁₂O₁₉:Mn²⁺ nanophosphor. This nanostructured green emitting BaAl₁₂O₁₉:Mn²⁺ phosphor can find potential application in Plasma Display Panels (PDPs) and mercury-free fluorescent lamps.     

Luminescence properties and energy transfer investigations of BaAl2B2O7:Ce3+,Tb3+ phosphors

Ce³⁺ and Tb³⁺ co-doped BaAl₂B₂O₇ phosphors were synthesized by the solid-state method. X-ray diffraction (XRD) was used to characterize the phase structure. The photoluminescent properties of Ce³⁺ and Tb³⁺ co-doped BaAl₂B₂O₇ phosphors were investigated by using the photoluminescence emission and excitation spectra. Under the excitation of near ultraviolet (n-UV) light, BaAl₂B₂O₇:Ce³⁺,Tb³⁺ phosphors exhibited blue emission corresponding to the f–d transition of Ce³⁺ ions and green emission bands corresponding to the f–f transition of Tb³⁺ ions, respectively. Effective energy transfer occurred from Ce³⁺ to Tb³⁺ in BaAl₂B₂O₇ host due to the observed spectra overlap between the emission spectrum of Ce³⁺ ion and the excitation spectrum of Tb³⁺ ion. The energy transfer efficiency from Ce³⁺ ion to Tb³⁺ ion was also calculated to be 71%. Furthermore, the concentration quenching and critical distance of BaAl₂B₂O₇:Ce³⁺,Tb³⁺ phosphors were also discussed. The energy transfer from Ce³⁺ to Tb³⁺ in BaAl₂B₂O₇ host was demonstrated to be resonant type via a dipole–dipole interaction mechanism with the energy transfer critical distance of 16.13 Å.     

Synthesis and characterization of BaAl2O4:Eu co-doped with different rare earth ions

Combustion method was used in this study to prepare BaAl₂O₄:Eu²⁺ phosphors co-doped with different trivalent rare-earths (Re³⁺=Dy³⁺, Nd³⁺, Gd³⁺, Sm³⁺, Ce³⁺, Er³⁺, Pr³⁺ and Tb³⁺) ions at an initiating temperature of 600 °C. The phosphors were annealed at 1000 °C for 3 h. As confirmed from the X-ray diffraction (XRD) data, both as prepared and post annealed samples crystallized in the well known hexagonal structure of BaAl₂O₄. All samples exhibited bluish-green emission associated with the 4f⁶5d¹→4f⁷ transitions of Eu²⁺ at ∼500 nm. Although the highest intensity was observed from Er³⁺ co-doping, the longest afterglow (due to trapping and detrapping of charge carriers) was observed from Nd³⁺ followed by Dy³⁺ co-doping. The traps responsible for the long afterglow were studied using thermoluminescence (TL) spectroscopy.     

Color improvement of white-light through Mn-enhancing yellow-green emission of SrSi2O2N2:Eu phosphor for white light emitting diodes

Photoluminescence (PL) enhancement of SrSi₂O₂N₂:Eu and the resultant color improvement of white-light were investigated via co-doping Mn with Eu. We observed that a unique absorption of host lattice of SrSi₂O₂N₂ and its visible band emission peaked at around ∼550 nm for SrSi₂O₂N₂:Mn²⁺ in the wavelength range of 450-600 nm. This highly eye-sensitive ∼550 nm-peaked band emission of SrSi₂O₂N₂ doped with Mn²⁺ happens to overlap the 535 nm-peaked band emission of SrSi₂O₂N₂ doped with Eu²⁺, resulting in an intensified photoluminescence in a maximum by 355%. By combining this as-prepared Mn intensified SrSi₂O₂N₂:Eu phosphor with blue InGaN chip, the quality of white-light was improved to 93.3% for color rendering index and 3584 K for correlated color temperature.     

Red emission in B- and Li-doped SrAl2O4:Eu phosphor under UV excitation

Samples of SrAl₂O₄:Eu³⁺ doped with B³⁺ and SrAl₂O₄:Eu³⁺ co-doped with B³⁺ and Li⁺ have been prepared by the solid-reaction method. The influence of B³⁺ and Li⁺ contents on luminescence property has been investigated. It is found that the substitution of B³⁺ for Al³⁺ greatly improves red emission intensity at 591, 615 and 701 nm. The dopant Li⁺ as charge compensator in SrAl₂O₄:Eu³⁺, B³⁺ can further enhance luminescence intensity. The strongest red emission is obtained in the Sr(Al_1.9, B_0.1)O₄:Eu_0.02³⁺, Li⁺_0.02 sample. The developed phosphors can be efficiently excited by ultraviolet (UV) light from 350 to 480 nm, which indicates that B³⁺ and Li⁺ co-doped SrAl₂O₄:Eu³⁺ is a good candidate phosphor applied in solid-state lighting in conjunction with white UV light-emitting diodes (LEDs).     

Improvement of Er:I11/2→Ce:F5/2 energy transfer rate in Er/Ce co-doped TeO2-ZnO-Na2O-Nb2O5 glasses

The B₂O₃ component was introduced into Er³⁺/Ce³⁺ co-doped TeO₂-ZnO-Na₂O-Nb₂O₅ glass to improve energy transfer rate of Er³⁺:⁴I_11/2→Ce³⁺:²F_5/2 phonon-assisted cross-relaxation process. With the 6 mol% substitution of B₂O₃ for TeO₂, the energy transfer rate increased from 1300 to 1831 s⁻¹ and the fluorescence intensity increased by about 13.4%. However, the more B₂O₃ substitution in the same glass system reduced the quantum efficiency of Er³⁺:⁴I_13/2→⁴I_15/2 transition due to the higher OH⁻ group concentration. The results show that an appropriate amount of B₂O₃ component can be used to improve the phonon-assisted energy transfer rate and enhance 1.53 μm fluorescence emission by increasing the phonon energy of host glass. The effect of B₂O₃ on the energy transfer process, the lifetimes of the ⁴I_11/2 and ⁴I_13/2 levels, and the upconversion emission have also been investigated.     

Luminescence in trivalent rare earth activated Sr4Al2O7 phosphor

In this paper we report the combustion synthesis of trivalent rare-earth (RE³⁺ = Dy, Eu and Ce) activated Sr₄Al₂O₇ phosphor. The prepared phosphors were characterized by the X-ray powder diffraction (XRD) and photoluminescence (PL) techniques. Photoluminescence emission peaks of Sr₄Al₂O₇:Dy³⁺ phosphor at 474 nm and 578 nm in the blue and yellow region of the spectrum. The prepared Eu³⁺ doped phosphors were excited by 395 nm then we found that the characteristics emission of europium ions at 615 nm (⁵D₀?⁷F₂) and 592 nm (⁵D₀?⁷F₁). Photoluminescence (PL) peaks situated at wavelengths of 363 and 378 nm in the UV region under excitation at around 326 nm in the Sr₄Al₂O₇:Ce³⁺ phosphor.     

Synthesis and characterization of thermoluminescent Li2B4O7 nanophosphor

Lithium borate (Li₂B₄O₇) is a low Z_eff, tissue equivalent material that is commonly used for medical dosimetry using the thermoluminescence (TL) technique. Nanocrystals of lithium borate were synthesized by the combustion method for the first time in the laboratory. TL characteristics of the synthesized material were studied and compared with those of commercially available microcrystalline Li₂B₄O₇. The optimum pre-irradiation annealing condition was found to be 300 °C for 10 min and that of post-irradiation annealing was 300 °C for 30 min. The synthesized Li₂B₄O₇ nanophosphor has very poor sensitivity for low doses of gamma up to 10¹ Gy whereas from 10¹ to 4.5×10² Gy this phosphor exhibits a linear response and then from 4.5×10² to 10³ Gy it shows supralinearity. Thermoluminescence properties of Li₂B₄O₇ nanophosphor doped with Cu has also been investigated in this paper. It shows low fading and a linear response over a wide range of gamma radiation from 1×10² to 5×10³ Gy. Therefore the synthesized lithium borate nanophosphor doped with Cu may be used for high dose measurements of gamma radiations.     

Emission analysis of Dy and Pr:Bi2O3-ZnF2-B2O3-Li2O-Na2O glasses

In this paper, we present the spectral results of Dy³⁺ and Pr³⁺ (1.0 mol%) ions doped Bi₂O₃-ZnF₂-B₂O₃-Li₂O-Na₂O glasses. Measurements of X-ray diffraction (XRD), differential scanning calorimetry (DSC) profiles of these rare-earth ions doped glasses have been carried out. From the DSC thermograms, glass transition (T_g), crystallization (T_c) and melting (T_m) temperatures have been evaluated. The direct and indirect optical band gaps have been calculated based on the glasses UV absorption spectra. The emission spectrum of Dy³⁺:glass has shown two emission transitions ⁴F_7/2→⁶H_15/2 (482 nm) and ⁴F_7/2→⁶H_13/2 (576 nm) with an excitation at 390 nm wavelength and Pr³⁺:glass has shown a strong emission transition ¹D₂→³H₄ (610 nm) with an excitation at 445 nm. Upon exposure to UV radiation, Dy³⁺ and Pr³⁺ glasses have shown bright yellow and reddish colors, respectively, from their surfaces.     

Luminescence properties of SrSi2O2N2 doped with divalent rare earth ions

The optical properties of SrSi₂O₂N₂ doped with divalent Eu²⁺ and Yb²⁺ are investigated. The Eu²⁺ doped material shows efficient green emission peaking at around 540 nm that is consistent with 4f⁷→4f⁶5d transitions of Eu²⁺. Due to the high quantum yield (90%) and high quenching temperature (>500 K) of luminescence, SrSi₂O₂N₂:Eu²⁺ is a promising material for application in phosphor conversion LEDs. The Yb²⁺ luminescence is markedly different from Eu²⁺ and is characterized by a larger Stokes shift and a lower quenching temperature. The anomalous luminescence properties are ascribed to impurity trapped exciton emission. Based on temperature and time dependent luminescence measurements, a schematic energy level diagram is derived for both Eu²⁺ and Yb²⁺ relative to the valence and conduction bands of the oxonitridosilicate host material.     

Thermoluminescence studies on Cu-doped Li2B4O7 single crystals

Lithium tetraborate (Li₂B₄O₇) is a tissue equivalent material and single crystals of this material doped with Cu are promising for dosimetric applications. In the present study highly transparent single crystals of lithium tetraborate (Li₂B₄O₇) doped with Cu (0.5 wt%) have been grown using the Czochralski technique. The Li₂B₄O₇:Cu crystals were studied using photoluminescence, X-ray diffraction (XRD), UV-vis transmission, time resolved fluorescence and thermoluminescence (TL) techniques. The TL readout of Li₂B₄O₇:Cu crystals showed two well-defined glow peaks at 402 K (peak-1) and 513 K (peak-2) for a 4 K/s heating rate. While the low temperature TL peak-1 fades completely within 24 h at room temperatures, the main dosimetric peak-2 remains the same. The TL sensitivity of the grown single crystal is found to be 3.3 times that of a conventional TL phosphor, TLD-100. The Li₂B₄O₇:Cu crystals showed a linear TL dose-response in the range from 1 mGy to 1 kGy. The TL analysis using a variable dose method revealed first order kinetics for both the peaks. Trap depth and frequency factor for peak-1 were found to be 0.81 eV and 5.2×10⁹ s⁻¹, whereas for peak-2 the values were 1.7 eV and 1.7×10¹⁶ s⁻¹, respectively.