基于原子转移自由基聚合技术的偶氮苯星形液晶聚合物的合成与表征

利用原子转移自由基聚合(ATRP)技术合成了含不同端基取代基的偶氮苯三臂星形侧链液晶聚合物. 均苯三酚与2-溴异丁酰溴通过酯化反应制备三官能团引发剂, 引发偶氮苯单体6-[4-(4-甲氧基苯基偶氮)酚氧基]己基甲基丙烯酸酯(MMAzo)或6-[4-(4-乙氧基苯基偶氮)酚氧基]己基甲基丙烯酸酯(EMAzo)的ATRP反应. 利用核磁共振氢谱(¹H NMR)、凝胶色谱(GPC)、差示扫描量热法(DSC)和偏光显微镜(POM)等手段对星形聚合物进行表征. 星形聚合物的液晶性与相应均聚物相似, 但偶氮苯端基取代基的不同导致星形聚合物的液晶性差别显著. 在紫外/可见光照射下星形聚合物呈现明显的异构化转变.     

AB_2型星形杂臂偶氮液晶聚合物的合成及表征

通过原子转移自由基聚合(ATRP)与ATRP衍生物化学修饰结合的方法,合成了一系列AB2型星形杂臂偶氮液晶聚合物.其中,A为聚苯乙烯,B为聚6-[4-(4′-甲氧基苯基)偶氮苯氧基己酯](PMMAZO).合成分三步进行.首先,以ATRP方法得到ω-溴聚苯乙烯活性链PS(Br).然后对PS(Br)进行化学改性,得到带两个末端溴原子的聚苯乙烯活性链PS(Br)2·最后,以PS(Br)2作为双官能团大分子引发剂,引发6-[4-(4′-甲氧基苯基)偶氮苯氧基]己酯(MMAZO)发生ATRP聚合,得到星形杂臂PS(PMMAZO)2聚合物.进一步对聚合产物进行了GPC和1H-NMR分析.结果表明合成产物是预期的星形杂臂聚合物,产物分子量可控且分子量分布狭窄.同时,以DSC和POM表征了星形杂臂聚合物的液晶性.     

偶氮苯型侧链液晶聚合物的阻隔特性研究

合成了偶氮苯侧链液晶聚合物聚甲基丙烯酸(3-[4-(4′-氰基偶氮苯)苯氧基]丙酯)(PM3ABCN),采用原位掠入射X射线衍射(GIXRD)方法研究了该聚合物膜在向列相和各向同性态(无定形相)时对气体的阻隔特性.并采用X射线能谱仪(EDS)分析铁片氧化后的氧含量,计算得到渗透通过聚合物膜的氧气的量.结果表明,当PM3ABCN膜处于各向同性态时,通过聚合物膜的氧气平均渗透量为1.92×10-3cm3 day-1m-2;而处于液晶态的膜对氧气的阻隔性提高了4.4倍,氧气平均渗透量为4.38×10-4 cm3day-1 m-2.结合样品表面的显微分析结果,探讨了液晶凝聚相结构对气体小分子的阻隔机理.     

用多官能链转移剂通过普通自由基聚合制备两亲性杂臂星形聚合物

以偶氮二异丁腈为引发剂,四(3-巯基丙酸季戊四醇四酯)(PETMP)为链转移剂进行甲基丙烯酸甲酯(MMA)的自由基聚合,得到了含有残余巯基的聚甲基丙烯酸甲酯大分子链转移剂(HS-PMMA).然后,以HS-PMMA作为大分子链转移剂进行甲基丙烯酸叔丁酯(tBMA)的自由基聚合,合成了杂臂星形聚合物.最后,将所得杂臂星形聚合物的PtBMA链段水解得到了两亲性杂臂星形聚合物.     

基于1,4-双(咪唑-1-基)苯的Mn(Ⅱ)/Co(Ⅱ)配位聚合物的合成、晶体结构及性质

在溶剂热条件下,合成了3个新的配位聚合物{[Mn3(oba)3(bib)(DMF)(H2O)]·DMF}n(1)、[Co(Hoba)2(bib)]n(2)和{[Co(aip)(bib)]·DMF}n(3)(bib=1,4-双(咪唑-1-基)苯,H2oba=4,4′-二苯醚二甲酸,H2aip=5-氨基间苯二甲酸,DMF=...     

多重响应性杂臂星型聚合物的RAFT聚合合成及性能研究

耦合先臂法("arm first")和可逆加成-断裂链转移(RAFT)自由基聚合制备以温度响应性聚(聚乙二醇甲醚丙烯酸酯-co-2-(2-乙氧基乙氧基)乙基丙烯酸酯)(POD)和p H响应性聚丙烯酸二甲氨基乙酯(PDMAEA)为臂,含二硫键的N,N'-双丙烯酰胱胺(BAC)为核的杂臂星型聚合物(MAS).采用傅里叶红外光谱(FTIR)、核磁共振氢谱(1H-NMR)和凝胶渗透色谱(GPC)对聚合物的结构、相对分子质量及分子量分布进行了表征.结果表明,该法能有效控制星型聚合物的合成(分子量分布指数PDI1.3).采用紫外可见吸收光谱法(UV-Vis)、动态光散射(DLS)考察了MAS在水中的相变行为.结果表明,随着臂PDMAEA含量的增加,星型聚合物的LCST增大.当臂POD与PDMAEA的摩尔投料比为5∶5时,聚合物浓度为1 mg/m L时其在纯水中的LCST为38.2℃.     

侧基含羟基的主链偶氮苯液晶共聚酯的合成及其光响应行为

以4,4’-双(6-羟基己氧基)联苯(BHHBP)、4,4’-双(6-羟基己氧基)偶氮苯(BHHAB)为液晶基元,利用苹果酸二乙酯(DM)和苯基丁二酸(PSA)采用无规共聚,合成了侧基含羟基的偶氮苯液晶共聚酯(Az-LCP).先在液晶态下拉伸取向,然后用六亚甲基二异氰酸酯(HDI)交联制备单畴取向偶氮苯液晶交联网络.通过核磁共振氢谱(1H-NMR)、凝胶渗透色谱(GPC)测试,对合成的Az-LCP进行结构表征,通过示差扫描量热分析(DSC)、X射线衍射(XRD)、偏光光学显微镜(POM)等对其液晶相变行为进行表征,研究了偶氮苯含量、交联密度、薄膜厚度对其光致弯曲行为的影响.结果表明,偶氮苯含量10%,交联12 h的Az-LCP1具有最佳的光致弯曲回复行为.     

一类含萘环结构的聚酯酰亚胺液晶聚合物的结构与性能研究

利用Higashi芳香聚酯直接缩聚法的原理,采用分步投料的方法,以N,N′-1,6-亚己基-双苯偏三酸酰亚胺二酸(IA6)、6-羟基-乙-萘甲酸(HNA)和4,4′-二羟基二苯酮(DHBP)为单体原料,合成了一系列聚酯酰亚胺共聚物.用核磁共振(NMR)、差热分析(DSC)、偏光显微镜(PLM)、广角X射线衍射(WAXD)、热重分析(TGA)等手段对所合成的聚酯酰亚胺的液晶行为、结构以及热性能进行了表征.研究结果表明,当HNA投料量占单体总投料量高于33mol%时,所得聚合物均呈明显的向列型热致液晶特性.但是,此类液晶聚合物仅在升温过程中出现液晶的相转变,而在降温过程中并未观察到液晶的相转变行为.由DSC结果分析可知,此类聚合物具有较高的玻璃化转变温度(Tg)和较低的熔融温度(Tm),有望成为一类既具有较低加工温度又有较高使用温度的液晶聚合物材料.     

杂金属杯[4]配位聚合物的合成与表征（英文）

合成了4个杂金属杯[4]配位聚合物{[Cd(L)(tpa)]·3H_2O}n(1),{[Zn_2(L)_2(tpa)_2]·3H_2O}n(2),{[Co(L)(oba)]·2DMA·0.5H_2O}_n(3)和{[Zn(L)(oba)]·DMA}n(4)(L=2-(1H-咪唑基-甲基)-6-(3-(1H-咪唑基-甲基)-5-叔丁基-2-羟基)苄基-4-叔丁基苯酚,H2tpa=对苯二甲酸,H2oba=4,4′-二苯醚二甲酸),并通过元素分析、热重、红外光谱、固态紫外、单晶X射线衍射和粉末X射线衍射对其进行了表征。单晶结构分析表明晶体1是单斜晶系,P21/n空间群,而晶体2,3和4均为三斜晶系,P1空间群。化合物1,2,3和4是由0维[M(N_4O_2C_(29)H_(36))](M=Zn,Co,Cd)的杂金属杯[4]与配体对苯二甲酸和4,4′-二苯醚二甲酸形成的一维配位聚合物。     

偶氮苯和氧化偶氮苯液晶基元侧链聚硅氧烷液晶的合成和性能研究

利用侧链带酰氯基的聚硅氧烷与取代偶氮苯酚进行大分子反应,合成了6种以偶氮苯氧羰基为侧链的聚硅氧烷Ⅲ_a-f;将其中的Ⅲ_a-c进行氧化,得到3种以氧化偶氮苯氧羰基为侧链的聚硅氧烷Ⅳ_a-c聚合物结构通过核磁共振、红外光谱和元素分析表征,利用偏光显微镜和差热分析仪研究了聚合物的相行为.讨论了苯环上取代基和液晶基元的中心桥键对聚合物液晶性能的影响.     

Pendant cyclodicarbaphosphazatriene-containing monomers and polymers: synthesis,crystal structures and polymerization behavior of [NC(NMe2)]2[NP(O-C6H4-p-C6H4-p-CH=CH2)(X)], X = Cl,OCH2CF3, OC6H5, OC6H4-m-CH3, OC6H4-p-Br

The reaction of the dicarbaphosphazene, [NC(NMe(2))](2)[NPCl(2)] (2), with the sodium salt of 4-hydroxy-4'-vinylbiphenyl afforded the vinyl group containing monomer [NC(NMe(2))](2)[NP(Cl)(O-C(6)H(4)-p-C(6)H(4)-p-CH=CH(2))] (3). Replacement of the lone chlorine atom of 3 by oxygen nucleophiles gave [NC(NMe(2))](2)[NP(OR)(O-C(6)H(4)-p-C(6)H(4)-p-CH=CH(2))] [R = CH(2)CF(3) (4); C(6)H(5) (5); C(6)H(4)-m-CH(3) (6); C(6)H(4)-p-Br(7)]. The X-ray crystal structures of 3-7 reveal that all the cyclodicarbaphosphazenes have a planar N(3)PC(2) ring; the ring carbons are completely planar, while the geometry around phosphorus is pseudotetrahedral. The presence of weak intermolecular hydrogen bonding [C-H---X(Cl or Br), C-H---N, or C-H---pi] interactions in 3-7 leads to the formation of polymeric architectures in the solid-state. The monomers 4-7 can be polymerized by a free-radical initiator to afford the corresponding air-stable homopolymers 8-11. These have moderate molecular weights with polydispersity indices ranging from 1.33 to 1.58. All of these polymers have high glass transition temperatures and have excellent thermal stability.     

Synthesis of water-soluble phenylazosalicylaldehyde analogues and their application to capillary electrophoretic determination of primary amines

Several primary amines are known to be endogenous substances, and they are to be detected at very low concentration level. Novel water-soluble azo dyes as precolumn derivatizing reagents were synthesized for the analysis of primary amines with strong visible-light absorption by CZE. A coupling reaction was used to introduce a sulfophenylazo group to salicylaldehyde or 1-hydroxy-2-naphthaldehyde to extend the conjugation and to improve the solubility in water of the derivatizing reagents, as well as the target compounds of the reaction products with the primary amines. Two azo dyes of 5-(4-sulfophenylazo)salicylaldehyde sodium salt (AZO1) and 4-(4-sulfophenylazo)-1-hydroxy-2-naphthaldehyde sodium salt (AZO2) were synthesized. Separation of eight kinds of n-alkylamines was performed by CZE after the derivatization with AZO1 or AZO2. The addition of Brij 35 to the running electrolyte and to the sample solutions was necessary to improve the solubility and the resolution among the analytes. Both reagents, AZO1 and AZO2, were compared with each other in terms of the reaction time of derivatization, the detection sensitivity and the total analysis time. The derivatization process using AZO2 was applied to the determination of four biogenic amines, histamine, tyramine, cadaverine and putrescine, and LODs at around micromolar level were achieved for the four amines.     

Synthesis and characterization of amphiphilic block–graft MPEG‐b‐(PαN3CL‐g‐alkyne) degradable copolymers by ring‐opening polymerization and click chemistry

A straightforward strategy is proposed for the synthesis of novel, amphiphilic block–graft MPEG‐b‐(PαN₃CL‐g‐alkyne) degradable copolymers. First, the ring‐opening polymerization of α‐chloro‐ε‐caprolactone (αClCL) was initiated by hydroxy‐terminated macroinitiator monomethoxy poly(ethylene glycol) (MPEG) with SnOct₂ as the catalyst. In a second step, pendent chlorides were converted into azides by the reaction with sodium azide. Finally, various kinds of terminal alkynes were reacted with pendent azides by copper‐catalyzed Huisgen's 1,3‐dipolar cycloaddition, and thus a “click” reaction. These copolymers were characterized by differential scanning calorimetry (DSC), ¹H NMR, IR, and gel permeation chromatography. By fixing the length of the MPEG block and increasing the length of PαClCL (or PαN₃CL) block, an increase tendency in T_gs was observed. However, the copolymers of MPEG‐b‐PαClCL and MPEG‐b‐PαN₃CL were semicrystalline when the M_n of MPEG was above 2000 g mol^?1. The block–graft copolymers formed micelles in the aqueous phase with critical micelle concentrations (CMCs) in the range of 1.4–12.0 mg L^?1 depending on the composition of polymers. The lengths of hydrophilic segment influence the shape of the micelle. The mean hydrodynamic diameters of the micelles from dynamic light scattering were in the range of 90–160 nm. In vitro hydrolytic degradation of block–graft copolymers is faster than the corresponding block copolymers. The drug entrapment efficiency and the drug loading content of micelles depending on the composition of block–graft polymers were described. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4320–4331, 2008     

Regioselective Substitution Reactions of Sulfur(VI)-Nitrogen-Phosphorus Rings: Reactions of the Halogenated Cyclic Thionylphosphazenes [NSOX(NPCl(2))(2)] (X = Cl or F) with Oxygen-Based Nucleophiles

The reactions of the cyclic thionylphosphazenes [NSOX(NPCl(2))(2)] (1, X = Cl; 2, X = F) with three oxygen-based nucleophiles of increasing basicity, sodium phenoxide (NaOPh), sodium trifluoroethoxide (NaOCH(2)CF(3)), and sodium butoxide (NaOBu) have been studied. The reaction of 1 and 2 with 4 equiv of NaOPh at 25 degrees C yielded the regioselectively tetrasubstituted species [NSOX{NP(OPh)(2)}(2)] (5d, X = Cl; 6d, X = F). Further reaction of 5d with an additional 2 equiv of NaOPh over several days or at elevated temperatures gave the fully substituted compound [NSO(OPh){NP(OPh)(2)}(2)] (5e), whereas 6d did not react further. The reaction of 1 and 2 with 5 equiv of NaOCH(2)CF(3) yielded in both cases [NSO(OCH(2)CF(3)){NP(OCH(2)CF(3))(2)}(2)] (7e), and similarly reaction with 5 equiv of NaOBu yielded [NSO(OBu){NP(OBu)(2)}(2)] (9e). In all cases, the reactions were monitored by (31)P NMR and (where applicable) (19)F NMR and were found to involve complete substitution at phosphorus via a predominantly vicinal pathway, followed by substitution at sulfur. Substitutional control of the reactions of NaOPh, NaOBu, with 1 and 2 was found to conform to the following general order of reactivity, PCl(2) > PCl(OR) > SOX (X = Cl, F). Although the reaction with NaOCH(2)CF(3) followed the same order of reactivity, a significant enhancement of reaction rate was detected with each equivalent of trifluoroethoxide added. Reaction of 7e with excess NaOCH(2)CF(3) led to elimination of (CF(3)CH(2))(2)O and the formation of the salts Na[NSO(OCH(2)CF(3))NP(OCH(2)CF(3))(2)NP(OCH(2)CF(3))O] (11) and Na[NS(O)O{NP(OCH(2)CF(3))(2)}(2)] (12). Crystals of 6d are triclinic, space group P&onemacr;, with a = 9.789(3) ?, b = 11.393(4) ?, c = 12.079(5) ?, alpha = 107.40(3) degrees, beta = 91.23(3) degrees, gamma = 93.18(3), V = 1283.6(8) ?(3), and Z = 2. Crystals of 5e are monoclinic, space group C2/c, with a = 32.457(3) ?, b = 10.747(1) ?, c = 18.294(2) ?, beta = 110.37(1) degrees, V = 5982.4(9) ?(3), and Z = 8.     

Synthesis and oxidation of d(6) tungsten pincer complexes: a complete series of tungsten(ii) hydridocarbonyl and halocarbonyl pincer complexes

Reaction of the neutral P(H)NP ligand [HN(SiMe(2)CH(2)PPh(2))(2)] with tungsten hexacarbonyl resulted in coordination of P(H)NP through both phosphorus donor atoms to form the tungsten complex [W(P(HN)P)(CO)(4)] (1). Reaction of P(H)NP with tris(acetonitrile)tricarbonyl tungsten gave both facial and meridional tridentate isomers [W(P(H)NP)(CO)(3)] (2-fac and 3-mer). These three d(6) tungsten complexes could be interconverted under appropriate conditions. The thermodynamically favored isomer 3 was protonated to form seven-coordinate [W(P(H)NP)(CO)(3)H][BF(4)] (4). A related series of cationic tungsten(ii) halide complexes was synthesized, [W(P(H)NP)(CO)(3)X](+) (6, X = I; 7, X = Br; 8, X = Cl; 9, X = F), by various routes. All of the tungsten(ii) complexes underwent deprotonation at the amine site of the P(H)NP ligand when triethylamine was added, resulting in neutral seven-coordinate complexes. Variable temperature (1)H, (31)P{(1)H}, and (13)C{(1)H} NMR spectroscopy showed fluxional behavior for all the seven-coordinate complexes reported here. Analysis of IR and NMR spectroscopic data showed trends through the series of coordinated halides. Crystal structures of tetracarbonyl 1, meridional tricarbonyl 3, and cationic hydride 4 were determined to confirm the coordination mode of the P(H)NP ligand.     

Dianionic platinadiphospholene complexes

1,2,3,4-tetraphenyl-1,2-dihydrodiphosphetene 1 reacts with lithium or sodium naphthalenide to afford the corresponding dianionic salts 2 and 3. An X-ray crystal structure analysis shows that dianion 3 of general formula [(1)2-2Na3(DME)2, Na(DME)3] is a polymeric structure consisting of [(1)2-2Na3(DME)2] units which are connected together through one sodium atom. Reaction of the dianionic lithium salt 2 with [Pt(COD)Cl2] affords the 4[Li(2.2.1)]2 complex, after the addition of 2 equiv of (2.2.1) cryptate. The overall geometry around platinum in 4[Li(2.2.1)]2 can be described as distorted square planar, and only the diastereomer (1-R, 2-S, 3-R, 4-S) is formed. X-ray data indicate that no delocalization takes place within each platinadiphospholene unit and that complex 4[Li(2.2.1)]2 must be regarded as the coordination of two molecules of dianion 2 onto a Pt2+ center. Reaction of the dianionic sodium salt 3 with 1 equiv of [Pt(COD)Cl2] produces the 4[Na(DME,Et2O)]2 complex which adopts a pseudotetrahedral geometry around platinum ( between interplane angles = 35), the two cationic units [Na(DME, Et2O)] being located along a C2 axis. Four weak interactions exist between the sodium cations and the phosphorus atoms. Only the (1-S, 2-S, 3-S, 4-S) diastereomer is formed. Bond distances in the diphospholene units of 4[Na(DME,Et2O)]2 are close to that of dianion 3 indicating that, like in 4[Li(2.2.1)]2, the complex can be described as a platinum (+2) dianionic species.     

Syntheses and Crystal Structures of Silver(I) Complexes by Depolymerizing [Ag(C(CPh)]n with a NP3 Ligand

Two silver(I) complexes were prepared by the reaction of [Ag(C(CPh)]n with NP3 [NP3 = N(CH2CH2PPh2)3] or with NP3 and [Cu(CH3CN)4]ClO4. Complex 1 [(Ag2Cl(NP3)2)(Ag5(C(CPh)6)] contains both NP3 and PhC(C- ligands. The complex cation is (Ag2Cl(NP3)2)+, in which two Ag(NP3)+ cations were bridged by a Cl- donor. The anion is (Ag5(C(CPh)6)-, where five Ag+ ions are linked by six C(CPh- to form a pentanuclear cluster. Complex 2 only contains NP3 ligand, where the silver center adopts a trigonal-bipyramidal geometry. Crystal data for 1: C133H116Ag7Cl3N2P6, Mr = 2789.54, triclinic, space group P, a = 13.0780(2), b = 15.3678(2), c = 31.2041(3) (A), α = 91.3928(7), β = 90.9328(8), γ = 96.0244(4)o, V = 6233.8(1) (A)3, T = 293(2) K, Z = 2, Dc = 1.486 g/cm3, F(000) = 2796, μ = 1.266 mm-1, the final R = 0.0746 and wR = 0.1953 for 16475 observed reflections with I > 2σ(I). Crystal data for 2: C42H42AgClNO4P3, Mr = 861.00, trigonal, space group R3, a = 17.451(1), b = 17.451(1), c = 11.3985(7) (A), V = 3006.0(3) (A)3, T = 293(2) K, Z = 3, Dc = 1.427 g/cm3, F(000) = 1326, μ = 0.731 mm-1, the final R = 0.0251 and wR = 0.0663 for 1499 observed reflections with I > 2σ(I).     

Dispersion of alumina suspension using comb-like and diblock copolymers produced by RAFT polymerization of AMPS and MPEG

Different copolymers of 2-acrylamido-2-methylpropanesulfonic acid sodium salt (AMPS) methoxypolyethyleneglycol methacrylate (MPEG) with statistical and diblock distributions were prepared using RAFT-controlled radical polymerization. The effect of polymer architecture and monomer ratio on the adsorption behavior, electrokinetic, and stability properties of the alumina suspensions was investigated. Adsorption isotherms showed that copolymer interaction depended on both the ratio of the monomers and their distribution within the macromolecular backbone. Changes in the electrokinetic properties of the alumina suspension after addition of the copolymers were investigated by monitoring the particle zeta-potential as a function of pH. A continuous shift in the isoelectric point IEP to a more acidic value was observed and particle charges were reversed when the amount of copolymer added exceeded a critical level.     

Hydridotris(thioxotriazolyl)borate (Tt), an ambidentate (N(3)/S(3)) tripodal ligand. X-ray crystal structures of sodium, bismuth(III), tin(IV), and manganese(I) complexes

Treatment of the heterocycle 5-thioxo-4,5-dihydro-3,4-dimethyl-1,2,4-triazole (thioxotriazole) with sodium tetrahydroborate at 210 degrees C provides the new [N(3)/S(3)] ambidentate tripod ligand hydridotris(thioxotriazolyl)borate (Tt) as its sodium complex salt. Complexes of this ligand with sodium, bismuth(III), tin(IV), and manganese(I) have been synthesized and characterized by X-ray crystallography. The structures of these complexes illustrate the ambidentate character of the ligand with the softer metals bismuth and tin exhibiting sulfur coordination, while sodium and manganese(I) bond via the ligand nitrogen donors. In the [S(3)] coordination mode the ligand creates eight-membered chelate rings with the metal with the consequence that the metal ligand unit adopts a propeller-type conformation with C(3)-symmetry. However, in the [N(3)] mode six-membered chelate rings are formed analogous to the familiar hydrotris(pyrazolyl)borate (Tp) ligand.     

The (Calix[4]arene)chloromolybdate(IV) anion [MoCl(Calix)](-): a convenient entry into molybdenum Calix[4]arene chemistry

The complex (HNEt(3))[MoCl(NCMe)(Calix)] (1), prepared from the reaction of [MoCl(4)(NCMe)(2)] with p-tert-butylcalix[4]arene, H(4)Calix, in the presence of triethylamine, has been used as a source of the d(2)-[Mo(NCMe)(Calix)] fragment. Complex 1 is readily oxidized with PhICl(2) to afford the molybdenum(VI) dichloro complex [MoCl(2)(Calix)] (2). Both complexes are a convenient entry point into molybdenum(VI) and molybdenum(IV) calixarene chemistry. The reaction of 1 with trimethylphosphine and pyridine in the presence of catalytic amounts [Ag(OTf)] led to the formation of neutral d(2) complexes [Mo(PMe(3))(NCMe)(Calix)] (3) and [Mo(NC(5)H(5))(NCMe)(Calix)] (4). The role of the silver salt in the reaction mixture is presumably the oxidation of the chloromolybdate anion of 1 to give a reactive molybdenum(V) species. The same reactions can also be initiated with ferrocenium cations such as [Cp(2)Fe](BF(4)). Without the presence of coordinating ligands, the dimeric complex [[Mo(NCMe)(Calix)](2)] (5) was isolated. The reaction of 1 with Ph(2)CN(2) led to the formation of a metallahydrazone complex [Mo(N(2)CPh(2))(NCMe)(Calix)] (6), in which the diphenyldiazomethane has been formally reduced by two electrons. Molybdenum(VI) complexes were also obtained from reaction of 1 with azobenzene and sodium azide in the presence of catalytic amounts of silver salt. The reaction with azobenzene led under cleavage of the nitrogen nitrogen bond to an imido complex [Mo(NPh)(NCMe)(Calix)] (7), whereas the reaction with sodium azide afforded the mononuclear molybdenum(VI) nitrido complex (HNEt(3))[MoN(Calix)] (8).