Synthesis of trisubstituted alkenes by reductive dehydroxylation of Baylis-Hillman adducts using polymethylhydrosiloxane (PMHS) and catalytic B(C6F5)3

B(C₆F₅)₃ as a catalyst and polymethylhydrosiloxane as a hydride source have been employed for the reductive dehydroxylation of Baylis-Hillman adducts wherein the hydride adds in an S_N2′ manner onto the unactivated allyl alcohol moiety with concomitant elimination of the hydroxy group along with double bond migration. The products formed were found to be E in the case of ester adducts and Z in the case of nitrile adducts.     

An efficient synthesis of 5-substituted 1H-tetrazoles via B(C6F5)3 catalyzed [3+2] cycloaddition of nitriles and sodium azide

A simple and efficient protocol is developed for the synthesis of 5-substituted 1H-tetrazole derivatives from various nitriles and sodium azide (NaN₃) via [3+2] cycloaddition reaction using B(C₆F₅)₃ as a catalyst. The present synthetic method displayed significant advantages such as low catalyst loading, mild reaction conditions, low toxicity, easy work-up, high yields, and compatibility with other functional groups.     

Ferric sulfate [Fe2(SO4)3·xH2O]: an efficient heterogeneous catalyst for the synthesis of tetrahydroquinoline derivatives using Povarov reaction

Fe₂(SO₄)₃·xH₂O can be used as an efficient and reusable catalyst for the synthesis of pyrano- and furanotetrahydroquinolines via one-pot three-component Povarov reaction involving aromatic aldehydes, aromatic amines, and cyclic enol ethers. The catalyst is recyclable, economically viable, and environmentally benign. This protocol provides good yields and diastereoselectivity as well as applicability on a wide range of substrates.     

Synthesis and properties of the Co7Se8−xSx and Ni7Se8−xSx solid solutions

We report the synthesis and elementary properties of the Co₇Se_8−xS_x (x=0-8) and Ni₇Se_8−xS_x (x=0-7) solid solutions. Both systems form a NiAs-type structure with metal vacancies. In general, the lattice parameters decrease with increasing x, but in the Ni₇Se_8−xS_x system c increases on going from x=5 to 7. Magnetic susceptibility measurements show that all samples exhibit temperature-independent paramagnetism from 25-250 K. Samples within the Co₇Se_8−xS_x system, as well as Ni₇Se₈ and Ni₇SeS₇, were found to be poor metals with resistivities of ∼0.20 and ∼0.06 mΩ cm at 300 K, respectively. The Sommerfeld constant (γ) was determined from specific heat measurements to be ∼13 mJ/mol_CoK² and ∼7 mJ/mol_NiK² for Co₇Se_8−xS_x and Ni₇Se_8−xS_x, respectively.     

Effects of gold catalysts and thermal evaporation method modifications on the growth process of Zn1−xMgxO nanowires

In this paper, we investigate the roles of gold catalysts and thermal evaporation method modifications in the growth process of Zn_1−xMg_xO nanowires. Zn_1−xMg_xO nanowires are fabricated on silicon substrates with and without using a gold catalyst. Characterizations reveal that Mg acts in a self-catalyst role during the growth process of Zn_1−xMg_xO nanowires grown on catalyst-free substrate. The optical properties and crystalline quality of the Zn_1−xMg_xO nanowires are characterized by room temperature photoluminescence (PL) measurements and Raman spectroscopy, respectively. The Raman and PL studies demonstrate that the Zn_1−xMg_xO nanowires grown using the catalyst-free method have good crystallinity with excellent optical properties and have a larger band-gap in comparison to those grown with the assistance of gold.     

A study on methanol steam reforming to CO2 and H2 over the La2CuO4 nanofiber catalyst

The La₂CuO₄ crystal nanofibers were prepared by using single-walled carbon nanotubes as templates under mild hydrothermal conditions. The steam reforming of methanol (SRM) to CO₂ and H₂ over such nanofiber catalysts was studied. At the low temperature of 150 °C and steam/methanol=1.3, methanol was completely (100%, 13.8 g/h g catalyst) converted to hydrogen and CO₂ without the generation of CO. Within the 60 h catalyst lifespan test, methanol conversion was maintained at 98.6% (13.6 g/h g catalyst) and with 100% CO₂ selectivity. In the meantime, for distinguishing the advantage of nanoscale catalyst, the La₂CuO₄ bulk powder was prepared and tested for the SRM reaction for comparison. Compared with the La₂CuO₄ nanofiber, the bulk powder La₂CuO₄ showed worse catalytic activity for the SRM reaction. The 100% conversion of methanol was achieved at the temperature of 400 °C, with the products being H₂ and CO₂ together with CO. The catalytic activity in terms of methanol conversion dropped to 88.7% (12.2 g/h g catalyst) in 60 h. The reduction temperature for nanofiber La₂CuO₄ was much lower than that for the La₂CuO₄ bulk powder. The nanofibers were of higher specific surface area (105.0 m²/g), metal copper area and copper dispersion. The in situ FTIR and EPR experiments were employed to study the catalysts and catalytic process. In the nanofiber catalyst, there were oxygen vacancies. H₂-reduction resulted in the generation of trapped electrons [e] on the vacancy sites. Over the nanofiber catalyst, the intermediate H₂CO/HCO was stable and was reformed to CO₂ and H₂ by steam rather than being decomposed directly to CO and H₂. Over the bulk counterpart, apart from the direct decomposition of H₂CO/HCO to CO and H₂, the intermediate H₂COO might go through two decomposition ways: H₂COO=CO+H₂O and H₂COO=CO₂+H₂.     

Nano-ferrous ferric oxide (nano-Fe3O4): Powerful,reusable, and stable catalyst for N-Boc protection of amines

Nano-ferrous ferric oxide (nano-Fe₃O₄) efficiently catalyzed N-boc protection of amines in high yields and acceptable reaction times. Nano-Fe₃O₄ was applied as an efficient, green, heterogeneous and reusable magnetite catalyst. Clean reaction, simple purification, short reaction time and high yield were some other advantages of this compound.     

Synthesis and characterization of n=5, 6 members of the La4Srn−4TinO3n+2 series with layered structure based upon perovskite

Layered compounds have been synthesized and structurally characterized for the n=5 and 6 members of the perovskite-related family La₄Sr_n−4Ti_nO_3n+2 by combining X-ray diffraction and transmission electron microscopy. Their structure can be regarded as comprising [(La,Sr)₅Ti₅O₁₇] and [(La,Sr)₆Ti₆O₂₀] perovskite blocks joined by crystallographic shears along the a-axis, with consecutive blocks shifted by 1/2 [100]_p. The n=5 member is similar to the previously reported n=5 member of other A_nB_nO_3n+2-related series. The n=6 member, which has only been briefly reported in other systems previously, is also a well-behaved member of this A_nB_nO_3n+2 series.     

Local environment in Ba2In2−xWxO5+3x/2 oxide ion conductors

The actual oxygen environment of the tungsten dopant in the Ba₂In_2−xW_xO_5+3x/2 solid solution was revealed by combining X-ray absorption spectroscopy at the tungsten L_I and L_III edges and at the indium L_I edge. Whatever the substitution ratio, the tungsten atoms exhibit a regular octahedral environment. When the substitution ratio increases, the oxygen vacancies are progressively filled until their total occupancy for x=2/3. For x?0.3, the perovskite structure is stabilised; the tungsten atoms are randomly distributed in the structure. Although X-ray diffraction revealed a cubic symmetry for these compositions, a local distortion of the indium environment is observed when a tungsten atom is in its surrounding.     

Facile generation of vicinal bromoazides from olefins using TMSN3 and TsNBr2 without any catalyst

A very rapid and efficient method has been developed for the synthesis of vicinal bromoazides directly from olefin using N,N-dibromo-p-toluenesulfonamide (TsNBr₂) without any catalyst. The reaction is extremely fast which goes into completion instantaneously to produce bromoazides. This procedure is applicable to various olefins such as cinnamates, chalcone, styrenes, and acrylate to give the corresponding 1,2-bromoazide in an excellent yield.     

FeCl3-SiO2 as a reusable heterogeneous catalyst for the synthesis of 5-substituted 1H-tetrazoles via [2+3] cycloaddition of nitriles and sodium azide

An efficient method for the preparation of 5-substituted 1H-tetrazole derivatives is reported using FeCl₃-SiO₂ as an effective heterogeneous catalyst. This method has the advantages of high yields, simple methodology, and easy work-up. The catalyst can be recovered by simple filtration and reused delivering good yields.     

Preparation, Characterization and Catalytic Performance of La-SO4/SBA-15 in Esterification of Acetic Acid with n-Butanol

La-SO42-/SBA-15 was synthesized with various amounts of lanthanum via incipient-wetness impregnation. Characterization was done by X-ray diffraction（XRD）, transmission electron micrographs（TEM）, nitrogen adsorption, FTIR spectroscopic analysis, thermogravimetric analysis, and the total amount of acidity of catalyst was estimated by TPD of NH3. The results indicate that lanthanum has been incorporated into SBA-15 molecular sieve. The prepared materials（La-SO42-/SBA-15） keep the highly ordered mesoporous two-dimensional hexagonal structure and do not change the mesoporous channel structure of the support SBA-15. The catalyst showed best catalytic activity in the synthesis of n-butyl acetate. The optimum conditions of the esterification by orthogonal experiments were studied： the molar ratio of n-butanol to acetic acid 1：1.2, the amount of catalyst 7.5%, reaction time 80 min. The yield of n-butyl acetate could reach 93.2% under the optimum conditions. The catalyst was recyclable, cost effective and environmental friendly.     

Direct syntheses of Lan+1NinO3n+1 phases (n=1, 2, 3 and ∞) from nanosized co-crystallites

A new direct route for the “bottom up” syntheses of phases in the La_n+1Ni_nO_3n+1 series (n=1, 2, 3 and ∞) has been achieved via single-step heat treatments of nanosized co-crystallized precursors. The co-crystallized precursors were prepared using a continuous hydrothermal flow synthesis system that uses a superheated water flow at ca. 400 °C and 24.1 MPa to produce nanoparticulate slurries. Overall, a significant reduction in time and number of steps for the syntheses of La₃Ni₂O₇ and La₄Ni₃O₁₀ was achieved compared with more conventional synthesis methods, which typically require multiple homogenization and reheating steps over several days.     

Chemical fixation of CO2 with highly efficient ZnCl2/[BMIm]Br catalyst system

The chemical fixation of CO₂ with mono-substituted terminal epoxides or cyclohexene oxide to form cyclic carbonates under the ZnCl₂/[BMIm]Br catalyst system without using additional organic solvents was achieved in excellent selectivity (>98%) and TOF (5410 h⁻¹) and the catalyst could be used six times almost without losing its catalytic activity and selectivity. Besides, the pure cis-cyclic carbonate of cyclohexene oxide was obtained in this catalyst system.     

Interactions of Ba2YCu3O6+y with the Gd3NbO7 buffer layer in coated conductors

A systematic study of the chemical interaction of Ba₂YCu₃O_6+y and Gd₃NbO₇ was conducted under two processing conditions: purified air (21% p_o2), and 100 Pa p_o2 (0.1% p_o2). Phases present along the pseudo-binary join Ba₂YCu₃O_6z and Gd₃NbO₇ were found to be in two five-phase volumes within the system. Three common phases that are present in all samples are (Y,Gd)₂Cu₂O₅, Ba(Y,Gd)₂CuO₅ and Cu₂O or CuO (depending on the processing conditions). The assemblies of phases can be categorized in three regions, with Ba₂YCu₃O_6+y: Gd₃NbO₇ ratios of (I)<5.5:4.5; (II)=5.5:4.5; and (III)>5.5:4.5. The lowest melting temperature of the system was determined to be ≈938 °C in air, and 850 °C at 100 Pa p_o2. Structure determinations of two selected phases, Ba₂(Gd_xY_1−x)NbO₆ (Fm3¯m, No. 225), and (Gd_xY_3−x)NbO₇ (C222₁, No. 20 and Ccmm, No. 63), were completed using the X-ray Rietveld refinement technique. Reference X-ray powder diffraction patterns for selected phases of Ba₂(Gd_xY_1−x)NbO₆ (x=0.2, 0.4, 0.6, and 0.8) and (Gd_xY_3−x)NbO₇ (x=0.6, 1.2, 1.8, 2.4 and 3) have been prepared for inclusion in the Powder Diffraction File (PDF).     

Effect of boron non-stoichiometry on B-site in perovskite type structure ScBxRh3 and CeBxRh3 on charges of atoms on A-site: study by X-ray photoelectron and nuclear magnetic resonance spectroscopies

The solid solutions of ScBRh₃-ScRh₃ and CeBRh₃-CeRh₃ are synthesized by the arc melting method, where RBRh₃ and RRh₃ (R=rare earth element) have perovskite and AuCu₃ type structures, respectively. The binding energy of Sc 2p_3/2 for ScB_xRh₃ increases with the boron concentration. The Knight shift of ⁴⁵Sc observed by nuclear magnetic resonance spectroscopy decreases with increase of boron concentration. The decrement of the Knight shift corresponds the Sc 4s electron density at the Fermi level. The intensity ratio of f²: f¹: f⁰ of Ce 3d XPS spectrum changes with boron concentration of CeB_xRh₃. It is concluded that in both cases of ScB_xRh₃ and CeB_xRh₃ the charge on the atoms on A-site changes with the concentration of the atoms on B-site, where the atoms are not directly bound.     

Structural, spectroscopic and photoluminescence studies of LiEu(WO4)2−x(MoO4)x as a near-UV convertible phosphor

A series of lithium europium double tungsto-molybdate phosphors LiEu(WO₄)_2−x(MoO₄)_x (x=0, 0.4, 0.8, 1.2, 1.6, 2.0) have been synthesized by solid-state reactions and their crystal structure, optical and luminescent properties were studied. As the molybdate content increases, the intensity of the ⁵D₀→⁷F₂ emission of Eu³⁺ activated at wavelength of 396 nm was found to increase and reach a maximum when the relative ratio of Mo/W is 2:0. These changes were found to be accompanied with the changes in the spectral feature, which can be attributed to the crystal field splitting of the ⁵D₀→⁷F₂ transition. As the molybdate content increases the emission intensity of the 615 nm peak also increases. The intense red-emission of the tungstomolybdate phosphors under near-UV excitation suggests them to be potential candidate for white light generation by using near-UV LEDs. In this study the effect of chemical compositions and crystal structure on the photoluminescent properties of LiEu(WO₄)_2−x(MoO₄)_x is investigated and discussed.     

Synthesis, structure and physical properties of Ru ferrites: BaMRu5O11 (M=Li and Cu) and BaM′2Ru4O11 (M′=Mn, Fe and Co)

The synthesis, structure, and physical properties of five R-type Ru ferrites with chemical formula BaMRu₅O₁₁ (M=Li and Cu) and BaM′₂Ru₄O₁₁ (M′=Mn, Fe and Co) are reported. All the ferrites crystallize in space group P6₃/mmc and consist of layers of edge sharing octahedra interconnected by pairs of face sharing octahedra and isolated trigonal bipyramids. For M=Li and Cu, the ferrites are paramagnetic metals with the M atoms found on the trigonal bipyramid sites exclusively. For M′=Mn, Fe and Co, the ferrites are soft ferromagnetic metals. For M′=Mn, the Mn atoms are mixed randomly with Ru atoms on different sites. The magnetic structure for BaMn₂Ru₄O₁₁ is reported.     

Synthesis and electrical conductivity of perovskite-type PrCo1−xMgxO3

Oxides in the system PrCo_1−xMg_xO₃ (x=0.0, 0.05, 0.10, 0.15, 0.20, 0.25) were synthesized by citrate technique and characterized by powder X-ray diffraction and scanning electron microscope. All compounds have a cubic perovskite structure (space group ). The maximum ratio of doped Mg in the system PrCo_1−xMg_xO₃ is x=0.2. Further doping leads to the segregation of Pr₆O₁₁ in PrCo_1−xMg_xO₃. The substitution of Mg for Co improves the performance of PrCoO₃ as compared to the electrical conductivity measured by a four-probe electrical conductivity analyzer in the temperature range from 298 to 1073 K. The substitution of Mg for Co on the B site may be compensated by the formations of Co⁴⁺ and oxygen vacancies. The electrical conductivity of PrCo_1−xMg_xO₃ oxides increases with increasing x in the range of 0.0-0.2. The increase in conductivity becomes considerable at the temperatures ?673 K especially for x?0.1; it reaches a maximum at x=0.2 and 1073 K. From x>0.2 the conductivity of PrCo_1−xMg_xO₃ starts getting lower. This is probably a result of the segregation of Pr₆O₁₁ in PrCo_1−xMg_xO₃ , which blocks oxygen transport, and association of oxygen vacancies. A change in activation energy for all PrCo_1−xMg_xO₃ compounds (x=0-0.25) was observed, with a higher activation energy above 573 K and a lower activation energy below 573 K. The reasons for such a change are probably due to the change of dominant charge carriers from Co⁴⁺ to Vö in PrCo_1−xMg_xO₃ oxides and a phase transition mainly starting at 573 K.     

Crystal structures of RPt3−xSi1−y(R=Y, Tb, Dy, Ho, Er, Tm, Yb) studied by single crystal X-ray diffraction

The crystal structures of ternary compounds RPt_3−xSi_1−y(R=Y, Tb, Dy, Ho, Er, Tm, Yb) have been elucidated from X-ray single crystal CCD data. All compounds are isotypic and crystallize in the tetragonal space group P4/mbm. The general formula RPt_3−xSi_1−y arises from defects: x≈0.20, y≈0.14. The crystal structure of RPt_3−xSi_1−y can be considered as a packing of four types of building blocks which derive from the CePt₃B-type unit cell by various degrees of distortion and Pt, Si-defects.