Electrochemical performance of graphene nanosheets as anode material for lithium-ion batteries

Graphene nanosheets (GNSs) were prepared from artificial graphite by oxidation, rapid expansion and ultrasonic treatment. The morphology, structure and electrochemical performance of GNSs as anode material for lithium-ion batteries were systematically investigated by high-resolution transmission electron microscope, scanning electron microscope, X-ray diffraction, Fourier transform infrared spectroscopy and a variety of electrochemical testing techniques. It was found that GNSs exhibited a relatively high reversible capacity of 672 mA h/g and fine cycle performance. The exchange current density of GNSs increased with the growth of cycle numbers exhibiting the peculiar electrochemical performance.     

Ultrathin CoNi-layered double hydroxide grown on nickel foam as high-performance current collector for lithium-sulfur batteries

Journal of Solid State Electrochemistry - This work designed and synthesized a novel cobalt-nickel-layered double hydroxide flake grown on nickel foam (CoNi LDH@NF) as a high-performance current...     

Pb-sandwiched nanoparticles as anode material for lithium-ion batteries

A sandwiched SiC@Pb@C nanocomposite was prepared through a simple ball-milling route and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. The SiC@Pb@C nanocomposite exhibits a much improved reversible capacity and cycling life as compared with a bare Pb anode. A reversible volumetric capacity of >1,586 mAh cm⁻³ (207 mAh g⁻¹) can be maintained after 600 cycles of charge and discharge in the potential interval between 0.005 and 1.0 V, which far exceeds those reported previously in the literature. The enhanced electrochemical performance is ascribed to the sandwiched structure in which nanosized Pb particles were anchored in between the rigid SiC core and the outer carbon shell, mitigating the damage done by the large volume change of the Pb interlayer during the alloying/dealloying process.     

Tin/polypyrrole composite anode using sodium carboxymethyl cellulose binder for lithium-ion batteries

A tin nanoparticle/polypyrrole (nano-Sn/PPy) composite was prepared by chemically reducing and coating Sn nanoparticles onto the PPy surface. The composite shows a much higher surface area than the pure nano-Sn reference sample, due to the porous higher surface area of PPy and the much smaller size of Sn in the nano-Sn/PPy composite than in the pure tin nanoparticle sample. Poly(vinylidene fluoride) (PVDF) and sodium carboxymethyl cellulose (CMC) were also used as binders, and the electrochemical performance was investigated. The electrochemical results show that both the capacity retention and the rate capability are in the same order of nano-Sn/PPy-CMC > nano-Sn/PPy-PVDF > nano-Sn-CMC > nano-Sn-PVDF. Scanning electronic microscopy (SEM) and electrochemical impedance spectroscopy (EIS) results show that CMC can prevent the formation of cracks in electrodes caused by the big volume changes during the charge-discharge process, and the PPy in the composite can provide a conducting matrix and alleviate the agglomeration of Sn nanoparticles. The present results indicate that the nano-Sn/PPy composite could be suitable for the next generation of anode materials with relatively good capacity retention and rate capability.     

Structural and functional characterisation of a biohybrid material based on acetylcholinesterase and layered double hydroxides

This work describes the use of layered double hydroxides (LDHs) for the immobilisation of acetylcholinesterase (AChE) on insulator/semiconductor solid supports. Different LDHs have been synthesised by a co-precipitation method. Afterwards, biohybrid materials based on AChE-LDH mixtures have been produced using wild and recombinant enzymes. Spectroscopic techniques have confirmed the LDH phase identity and the links created between the LDH and AChE. Spectrophotometric assays have demonstrated that most of the biohybrid materials are functional and stable. Several configurations have been used for AChE immobilisation. The highest catalytic responses have been observed when using wild enzyme and immobilising AChE-LDH mixtures on LDHs previously deposited on the solid supports. LDHs have been demonstrated to be suitable host matrices for AChE immobilisation on electrodes for the subsequent development of electrochemical biosensors.     

Self-supported ultrathin NiCo layered double hydroxides nanosheets electrode for efficient electrosynthesis of formate

Electrochemical CO₂ reduction into energy-carrying compounds, such as formate, is of great importance for carbon neutrality, which however suffers from high electrical energy input and liquid products crossover. Herein, we fabricated self-supported ultrathin NiCo layered double hydroxides(LDHs) electrodes as anode for methanol electrooxidation to achieve a high formate production rate(5.89 mmol h^-1cm^-2)coupled with CO₂ electro-reduction at the cathode....     

Cerium vanadate/carbon nanotube hybrid composite nanostructures as a high-performance anode material for lithium-ion batteries

The pristine CeVO4 and CeVO4/CNT hybrid composite nanostructured samples were facilely synthesized using a simple silicone oil-bath method.From the X-ray diffra...     

Advances in preparation methods and mechanism analysis of layered double hydroxide for lithium-ion batteries and lithium-sulfur batteries

Lithium-ion (Li-ion) battery and lithium-sulfur (Li-S) battery have attracted significant attention as promising components for large-scale energy storage becau...     

Electrochemical study on different layers of graphene based TiO2/graphene composites as an anode for lithium-ion batteries

Research on Chemical Intermediates - In order to explore the influence of the layers of graphene on the lithium-ion battery composites, to increase the electroconductivity of TiO2 and...     

Synthesis of Li4Ti5O12 fibers as a high-rate electrode material for lithium-ion batteries

Porous lithium titanate (Li₄Ti₅O₁₂) fibers, composed of interconnected nanoparticles, are synthesized by thermally treating electrospun precursor fibers and utilized as an energy storage material for rechargeable lithium-ion batteries. The material is characterized by X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, and thermal analysis. Scanning electron microscopy results show that the Li₄Ti₅O₁₂ fibers calcined at 700?°C have an average diameter of 230?nm. Especially, the individual fiber is composed of nanoparticles with an average diameter of 47.5?nm. Electrochemical properties of the material are evaluated using cyclic voltammetry, galvanostatic cycling, and electrochemical impedance spectroscopy. The results show that as-prepared Li₄Ti₅O₁₂ exhibits good cycling capacity and rate capability. At the charge–discharge rate of 0.2, 0.5, 1, 2, 10, 20, 40, and 60?C, its discharge capacities are 172.4, 168.2, 163.3, 155.9, 138.7, 123.4, 108.8, and 90.4?mAh?g^?1, respectively. After 300 cycles at 20?C, it remained at 120.1?mAh?g^?1. The obtained results thus strongly support that the electrospun Li₄Ti₅O₁₂ fibers could be one of the most promising candidate anode materials for lithium-ion batteries in electric vehicles.     

Amperometric nitrite biosensor based on a gold electrode modified with cytochrome c on Nafion and Cu-Mg-Al layered double hydroxides

An amperometric biosensor for nitrite was prepared by immobilizing cytochrome c (Cyt c) on a gold electrode that was modified with Nafion and a Cu-Mg-Al layered double hydroxide (Cu-LDH). The Cu-LDH was characterized by Fourier transform infrared spectroscopy and powder X-ray diffraction. The UV-visible spectrum suggests that Cyt c retains its native conformation in the modified film. The direct electrochemical investigation indicated that the composite film represents a good platform for the immobilization of Cyt c as well as an excellent promoter for the electron transfer between Cyt c and the gold electrode. Moreover, the biosensor showed a remarkable bioelectrocatalytic activity for the oxidation of nitrite with a linear range from 0.75 to 123 μM. The detection limit is 2?×?10^?7 M (S/N?=?3). The biosensor was successfully applied to the determination of nitrite in food samples.     

含Fe、Co、Ni的LDHs为催化剂前体生长碳纳米管

分别以具有相似Fe、Co、Ni含量的层状双金属氢氧化物（LDHs）为催化剂前体,用化学气相沉积的方法生长碳纳米管（CNTs）。 催化剂由LDHs焙烧还原得到。 通过X射线衍射（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）及拉曼光谱（Raman）测试技术对LDHs及其焙烧产物的结构、CNTs的形貌和结构进行了研究。 结果表明,3种催化剂生长的CNTs均为多壁结构;其中Co催化剂活性较低,生长CNTs的管径较细、石墨化程度较高;Ni催化剂的活性较高,生长CNTs的密度较大、管壁较厚、石墨化程度较差;Fe催化剂的活性介于Co和Ni之间。 催化剂活性及CNTs的密度可以由生长CNTs的结构来解释。     

Electrospun CuFe_2O_4 nanotubes as anodes for high-performance lithium-ion batteries

Herein,we report on the synthesis and lithium storage properties of electrospun one-dimensional(1D) CuFe_2O_4 nanomaterials.1D CuFe_2O_4nanotubes and nanorods were fabricated by a single spinneret electrospinning method followed by thermal decomposition for removal of polymers from the precursor fibers.The as-prepared CuFe_2O_4 nanotubes with wall thickness of ~50 nm presented diameters of ~150 nm and lengths up to several millimeters.It was found that phase separation between the electrospun composite materials occured during the electrospinning process,while the as-spun precursor nanofibers composed of polyacrylonitrile(PAN),polyvinylpyrrolidone(PVP) and metal salts might possess a core-shell structure(PAN as the core and PVP/metal salts composite as the shell) and then transformed to a hollow structure after calcination.Moreover,as a demonstration of the functional properties of the 1D nanostructure.CuFe_2O_4 nanotubes and nanorods were investigated as anodes for lithium ion batteries(LIBs).It was demonstrated that CuFe_2O_4 nanotubes not only delivered a high reversible capacity of ~816 mAh·g~(-1) at a current density of 200 mA·g~(-1)over 50 cycles,but also showed superior rate capability with respect to counterpart nanorods.Probably,the enhanced electrochemical performance can be attributed to its high specific surface areas as well as the unique hollow structure.     

Electrospun CuFe2O4 nanotubes as anodes for high-performance lithium-ion batteries

Herein,we report on the synthesis and lithium storage properties of electrospun one-dimensional(1D) CuFe_2O_4 nanomaterials.1D CuFe_2O_4nanotubes and nanorods were fabricated by a single spinneret electrospinning method followed by thermal decomposition for removal of polymers from the precursor fibers.The as-prepared CuFe_2O_4 nanotubes with wall thickness of ~50 nm presented diameters of ~150 nm and lengths up to several millimeters.It was found that phase separation between the electrospun composite materials occured during the electrospinning process,while the as-spun precursor nanofibers composed of polyacrylonitrile(PAN),polyvinylpyrrolidone(PVP) and metal salts might possess a core-shell structure(PAN as the core and PVP/metal salts composite as the shell) and then transformed to a hollow structure after calcination.Moreover,as a demonstration of the functional properties of the 1D nanostructure.CuFe_2O_4 nanotubes and nanorods were investigated as anodes for lithium ion batteries(LIBs).It was demonstrated that CuFe_2O_4 nanotubes not only delivered a high reversible capacity of ~816 mAh·g~(-1) at a current density of 200 mA·g~(-1)over 50 cycles,but also showed superior rate capability with respect to counterpart nanorods.Probably,the enhanced electrochemical performance can be attributed to its high specific surface areas as well as the unique hollow structure.     

Silicon nanopowder as active material for hybrid electrodes of lithium-ion batteries

Cycling parameters (reversible specific capacity, first-cycle coulombic efficiency, accumulated irreversible capacity, and reversible capacity retention) of hybrid electrodes based on mechanical mixtures of a silicon nanopowder with KS6 and MAG-20 synthetic graphites and binders of varied nature were subjected to an integrated analysis in comparison with graphite electrodes.     

Advances in efficient electrocatalysts based on layered double hydroxides and their derivatives

The explore and development of electrocatalysts have gained significant attention due to their indispensable status in energy storage and conversion systems, such as fuel cells, metal–air batteries and solar water splitting cells. Layered double hydroxides(LDHs) and their derivatives(e.g., transition metal alloys, oxides, sulfides, nitrides and phosphides) have been adopted as catalysts for various electrochemical reactions, such as oxygen reduction, oxygen evolution, hydrogen evolution, and CO_2 reduction, which show excellent activity and remarkable durability in electrocatalytic process. In this review, the synthesis strategies, structural characters and electrochemical performances for the LDHs and their derivatives are described. In addition, we also discussed the effect of electronic and geometry structures to their electrocatalytic activity. The further development of high-performance electrocatalysts based on LDHs and their derivatives is covered by both a short summary and future outlook from the viewpoint of the material design and practical application.     

Heterostructures based on transition metal chalcogenides and layered double hydroxides for enhanced water splitting

Heterostructure engineering, as a strategy to overcome the limitation of single component activity, e.g., transition metal chalcogenides (TMCs) or layered double hydroxides (LDHs), and improve the electrocatalytic performance of multi-electron charge transfer reactions is reviewed. The main mechanism of heterostructure engineering is briefly described, and selected examples are given to investigate the contribution of synergistic effects of such heterostructure to improve water splitting.