三维漏斗中颗粒物质堵塞问题的数值实验研究

对于工程和实验中使用漏斗颗粒流而言,连续稳定的流量是必要的.当漏斗口较小时,很容易发生堵塞行为.堵塞现象对于交通流、疏散问题等也具有重要的意义.前人主要使用扰动的方法破坏漏斗中已有的堵塞,以便引起下一次堵塞,加快实验进程.本文利用自主开发的基于GPU(graphics processing unit)的密集颗粒流模拟程序,主要研究当三维漏斗开口打开后的第一次堵塞行为,不再引入扰动.详细讨论了漏斗开口尺寸、漏斗锥角等几何参数对坍塌规模的影响.发现对于坍塌规模的概率分布符合前人的研究结果,可以分为两部分:峰的左边呈幂函数上升形式,峰的右边呈指数衰减趋势.对于漏斗开口尺寸和漏斗锥角而言,均存在一个临界值使得堵塞不再发生.     

Discharge flow of granular particles through an orifice on a horizontal hopper:Effect of the hopper angle

We experimentally investigate the effect of the hopper angle on the flow rate of grains discharged from a twodimensional horizontal hopper on a conveyor belt.The flow rate grows with the hopper angle,and finally reaches a plateau.The curve feature appears to be similar for different orifice widths and conveyor belt-driven velocities.On the basis of an empirical law of flow rate for a flat-bottom hopper,we propose a modified equation to describe the relation between the flow rate and hopper angle,which is in a good agreement with the experimental results.     

Stray field magnetic resonance tomography using ferromagnetic spheres

The methodology for obtaining two- and three-dimensional magnetic resonance images by using azimuthally symmetric dipolar magnetic fields from ferromagnetic spheres is described. We utilize the symmetric property of a geometric sphere in the presence of a large externally applied magnetic field to demonstrate that a complete two- or three-dimensional structured rendering of a sample can be obtained without the motion of the sample relative to the sphere. Sequential positioning of the integrated sample-sphere system in an external magnetic field at various angular orientations provides all the required imaging slices for successful computerized tomographic image reconstruction. The elimination of the requirement to scan the sample relative to the ferromagnetic tip in this imaging protocol is a potentially valuable simplification compared to previous scanning probe magnetic resonance imaging proposals.     

Effects of granular size on stress transmission in a granular column

We investigate the deflection and the fluctuation of stresses due to different sizes of granular material in a cylindrical column. It is experimentally observed that the saturation mass systemically increases with granule diameter . The results indicate the shielding of vertical stress in silo is varying. We show that the ratio between the horizontal and the vertical stresses, K, decreases with the increase in grainule diameter D. In addition, it has also been found that the presence of larger granules leads to stronger stress fluctuation on the bottom plate of silo.     

二维斜面粗糙边界附近颗粒流量密度分布

以往的实验研究中，已经知道粗糙边界条件下，二维颗粒流的颗粒流量是以通道中心横向对称分布的，颗粒流横向分布既受通道宽度的影响，同时也受通道斜面倾斜角的影响，而且颗粒在通道两侧的分布明显少于通道中间. 主要研究粗糙边界附近颗粒分布随通道宽度以及通道斜面倾斜角的变化规律. 在稀疏流状态以及保持边界墙体的粗糙度不变的条件下，对应不同通道宽度，粗糙边界附近10d范围内的颗粒流量密度(ξ=ρv)随斜面倾斜角的增大而减小，颗粒流量密度随通道宽度的变化存在一临界宽度Wc；在通道宽度小于Wc时，粗糙墙体附近10d范围内颗粒流量密度ξ随sinθ呈指数衰减，通道宽度大于Wc时，颗粒流量密度ξ_sinθ曲线随θ增大几乎呈线性减小. 关键词： 二维颗粒流 颗粒物质 颗粒流量密度     

颗粒孔洞流的最大休止倾角和流量公式

实验测量了重力驱动下的玻璃珠颗粒样品通过不同倾角和孔径的圆形孔洞的卸载流量.发现无论孔径大小,流量均与倾角的余弦呈良好的线性关系;线性外推得到的零流量角,即流量休止临界角随颗粒粒径与孔洞直径之比的减小而线性增加;在无穷大孔径极限下,此临界角在Bagnold角的误差范围内与样品的安息角一致.这些结果表明流量随倾角余弦线性变化的经验公式能揭示临界角的行为和特性,这是参数随倾角变化的Beverloo公式所不能描述的. 关键词： 颗粒物质 倾斜孔洞流 Beverloo公式     

颗粒介质弹性的弛豫

颗粒介质是复杂的多体相互作用体系, 其弹性源自内部的力链结构, 弹性能量处在亚稳态, 具有复杂的弛豫行为. 在常规作用下, 颗粒介质往往呈现明显的弹性弛豫. 应力松弛是应变恒定时应力的衰减现象, 弹性弛豫是应力松弛的主要原因. 在前期工作基础上, 从弹性势能面和双颗粒温度热力学角度分析了弹性弛豫的机理, 量化了弹性应力演化不可逆过程; 基于双颗粒温度热力学计算得到了弹性能、颗粒温度和应力的演化, 其中应力松弛的计算结果与实验结果基本一致, 讨论了颗粒温度初值和输运系数的影响. 指出, 开展力链结构及其动力学研究是揭示宏观弹性弛豫机理的关键.     

颗粒物质中压力随高度的变化规律

用实验方法研究了圆筒容器中静止沙堆内策略的分布及变化规律。直接测量了颗粒物质的摩擦力，给出摩擦力与颗粒填充密度的关系，摩擦力与颗粒堆积高度的关系，并分析讨论了相关因素。     

Experimental compaction of anisotropic granular media

We report on experiments to measure the temporal and spatial evolution of packing arrangements of anisotropic and weakly confined granular material, using high-resolution -ray adsorption. In these experiments, the particle configurations start from an initially disordered, low-packing-fraction state and under vertical solicitations evolve to a dense state. We find that the packing fraction evolution is slowed by the grain anisotropy but, as for spherically shaped grains, can be well fitted by a stretched exponential. For a given type of grains, the characteristic times of relaxation and of convection are found to be of the same order of magnitude. On the contrary, compaction mechanisms in the media strongly depend on the grain anisotropy.     

窄振动颗粒床中的运动模式

实验研究了竖直振动情况下,窄容器中颗粒的运动模式.发现运动模式与颗粒床厚度及振动加速度有很强的依赖关系.实验表明横向尺寸较小的容器可以抑制对流卷及拱起现象.对于足够厚的颗粒床,即使振动加速度很大,颗粒床下部仍然存在着颗粒聚集态.出现聚集态时,颗粒床对容器底的冲击力是倍周期分岔的.实验表明倍周期分岔点与颗粒床厚度无关.对于较薄的颗粒床,颗粒可以是聚集态或对流卷,视颗粒尺寸而定.如果使用尺寸分布非常窄的球形颗粒,可以观察到颗粒的有序排列.出现同心的圆筒形“壳”结构,每个“壳”上的颗粒是二维六角密排列的. 关键词： 颗粒物质 倍周期分岔 颗粒聚集态 球堆积     

On the existence of stationary states during granular compaction

When submitted to gentle mechanical taps a granular packing slowly compacts until it reaches a stationary state that depends on the tap characteristics. The properties of such stationary states are experimentally investigated. The influence of the initial state, taps properties and tapping protocol are studied. The compactivity of the packings is determinated. Our results strongly support the idea that the stationary states are genuine thermodynamic states.     

竖直振动颗粒物厚层中冲击力分岔现象

实验研究了竖直振动颗粒物厚层中颗粒对容器底部的压力. 发现这种压力是脉冲式的，并表现出受振动加速度控制的倍周期分岔现象. 在颗粒层底部观察到颗粒密堆积在一起的聚集态. 聚集态内颗粒的自由程较小，并像一个整体一样运动. 关键词： 颗粒物质 混沌 倍周期分岔 非弹性碰撞     

竖直振动颗粒床中的倍周期运动

实验研究了竖直振动颗粒床中颗粒对容器底部的压力随振动强度的变化情况.发现压力随振动加速度的增加经历倍周期分岔，典型的分岔序列为：2P，4P，混沌，3P，6P，混沌，4P，8P，混沌.观察表明，伴随倍周期分岔现象，在颗粒床底部出现颗粒的聚集态.聚集态内颗粒密堆积在一起并作整体的上下运动.采用完全非弹性蹦球模型分析了颗粒对容器底的冲击力，并给出了倍周期分岔现象的一种解释. 关键词： 颗粒物质 混沌 倍周期分岔 非弹性碰撞     

Nanomagnetism:Principles,nanostructures,and biomedical applications

Nanomagnetism is the origin of many unique properties in magnetic nanomaterials that can be used as building blocks in information technology, spintronics, and biomedicine. Progresses in nanomagnetic principles, distinct magnetic nanostructures, and the biomedical applications of nanomagnetism are summarized.     

二维颗粒体系单轴压缩形成的力链结构

从接触力、能量分布和接触网络结构特点出发,提出了强力链的力大小(Fc)判据(Fc大于平均接触力〈F〉)和角度θc判据(θc=180/〈Z〉,其中〈Z〉是平均配位数),指出强力链和弱力链是本质不同的两类结构存在于颗粒体系中,其中强力链网络与体系的宏观性质直接相关.以二维颗粒体系的单轴压缩为例,计算发现了强力链长度的幂率分布规律,分析了侧向压力系数与相应强力链网络结构的关系:当内部强力链网络充分发育而不再变化时,侧向压力系数趋于稳定数值.     

准静态颗粒介质的弹性势能弛豫分析

颗粒体系是典型的多体相互作用体系, 具有多重的能量亚稳态. 对于准静态颗粒体系, 引入构型颗粒温度T_c描述弹性势能涨落. 本文认为平衡的体系具有一定的构型颗粒温度T_a, 其量值反映了其结构特征. 当外界扰动激发的构型颗粒温度超出T_a时, 产生不可逆过程. 通过对应力松弛过程的分析, 发现(T_c-T_a)激发了弹性弛豫, 且(T_c-T_a)越大则松弛过程中应力变化越大, 最终构型颗粒温度T_c→T_a时,宏观应力松弛结束,体系达到新的能量亚稳态.     

Vertically shaken column of spheres. Onset of fluidization

The onset of surface fluidization of granular material in a vertically vibrated container, z = A cosωt , is studied experimentally. Recently, for a column of spheres it has been theoretically found (see T. P?schel, T. Schwager, C. Salue na, Phys. Rev. E 62, 1361 (2000)) that the particles lose contact if a certain condition for the acceleration amplitude ≡Aω²/g = f (ω) holds. This result is in disagreement with other findings where the criterion = = const was found to be the criterion of fluidization. We show that for a column of spheres a critical acceleration is not a proper criterion for fluidization and compare the results with theory. Received 21 August 2000 and Received in final form 30 October 2000     

Simulation of triaxial response of granular materials by modified DEM

A modified discrete element method(DEM)with rolling effect taken into consideration is developed to examine macroscopic behavior of granular materials in this study.Dimensional analysis is firstly performed to establish the relationship between macroscopic mechanical behavior,mesoscale contact parameters at particle level and external loading rate.It is found that only four dimensionless parameters may govern the macroscopic mechanical behavior in bulk.The numerical triaxial apparatus was used to study their influence on the mechanical behavior of granular materials.The parametric study indicates that Poisson’s ratio only varies with stiffness ratio,while Young’s modulus is proportional to contact modulus and grows with stiffness ratio,both of which agree with the micromechanical model.The peak friction angle is dependent on both inter-particle friction angle and rolling resistance.The dilatancy angle relies on inter-particle friction angle if rolling stiffness coefficient is sufficiently large.Finally,we have recommended a calibration procedure for cohesionless soil,which was at once applied to the simulation of Chende sand using a series of triaxial compression tests.The responses of DEM model are shown in quantitative agreement with experiments.In addition,stress-strain response of triaxial extension was also obtained by numerical triaxial extension tests.     

稠密颗粒射流倾斜撞击颗粒膜特征

采用高速摄像仪对稠密颗粒射流倾斜撞击形成的类液体颗粒膜特征进行实验研究,考察了颗粒粒径、射流速度以及射流含固率等因素对颗粒膜形态及动态特征的影响.结果表明:随着颗粒粒径增大,稠密颗粒倾斜撞击流由颗粒膜向散射模式转变;随着射流速度增加,气固不稳定增强,射流流量出现脉动,正面与侧面分别表现为颗粒膜的非轴对称振荡和表面波纹结构;颗粒膜非轴对称振荡的振荡频率和振荡幅度随射流速度的增大而增大;表面波纹速度和波长沿传播方向增大,波纹间存在叠加现象.颗粒膜出现非轴对称振荡主要是因为喷嘴出口由气固不稳定性引起的射流流量脉动,射流流量脉动频率与撞击面振荡频率基本相当.