Microwave-assisted acid hydrolysis of proteins combined with liquid chromatography MALDI MS/MS for protein identification

Simple and efficient digestion of proteins, particularly hydrophobic membrane proteins, is of significance for comprehensive proteome analysis using the bottom-up approach. We report a microwave-assisted acid hydrolysis (MAAH) method for rapid protein degradation for peptide mass mapping and tandem mass spectrometric analysis of peptides for protein identification. It uses 25% trifluoroacetic acid (TFA) aqueous solution to dissolve or suspend proteins, followed by microwave irradiation for 10 min. This detergent-free method generates peptide mixtures that can be directly analyzed by liquid chromatography (LC) matrix-assisted laser desorption ionization (MALDI) mass spectrometry (MS) without the need of extensive sample cleanup. LC-MALDI MS/MS analysis of the hydrolysate from 5 microg of a model transmembrane protein, bacteriorhodopsin, resulted in almost complete sequence coverage by the peptides detected, including the identification of two posttranslational modification sites. Cleavage of peptide bonds inside all seven transmembrane domains took place, generating peptides of sizes amenable to MS/MS to determine possible sequence errors or modifications within these domains. Cleavage specificity, such as glycine residue cleavage, was observed. Terminal peptides were found to be present in relatively high abundance in the hydrolysate, particularly when low concentrations of proteins were used for MAAH. It was shown that these peptides could still be detected from MAAH of bacteriorhodopsin at a protein concentration of 1 ng/microl or 37 fmol/microl. To evaluate the general applicability of this method, it was applied to identify proteins from a membrane protein enriched fraction of cell lysates of human breast cancer cell line MCF7. With one-dimensional LC-MALDI MS/MS, a total of 119 proteins, including 41 membrane-associated or membrane proteins containing one to 12 transmembrane domains, were identified by MS/MS database searching based on matches of at least two peptides to a protein.     

Retention time alignment of LC/MS data by a divide-and-conquer algorithm

Liquid chromatography-mass spectrometry (LC/MS) has become the method of choice for characterizing complex mixtures. These analyses often involve quantitative comparison of components in multiple samples. To achieve automated sample comparison, the components of interest must be detected and identified, and their retention times aligned and peak areas calculated. This article describes a simple pairwise iterative retention time alignment algorithm, based on the divide-and-conquer approach, for alignment of ion features detected in LC/MS experiments. In this iterative algorithm, ion features in the sample run are first aligned with features in the reference run by applying a single constant shift of retention time. The sample chromatogram is then divided into two shorter chromatograms, which are aligned to the reference chromatogram the same way. Each shorter chromatogram is further divided into even shorter chromatograms. This process continues until each chromatogram is sufficiently narrow so that ion features within it have a similar retention time shift. In six pairwise LC/MS alignment examples containing a total of 6507 confirmed true corresponding feature pairs with retention time shifts up to five peak widths, the algorithm successfully aligned these features with an error rate of 0.2%. The alignment algorithm is demonstrated to be fast, robust, fully automatic, and superior to other algorithms. After alignment and gap-filling of detected ion features, their abundances can be tabulated for direct comparison between samples.     

Rapid protein identification using a microscale electrospray LC/MS system on an ion trap mass spectrometer

A methodology has been developed for the rapid identification of gel separated proteins. Following in gel protein digestion with trypsin, the resulting peptide mixture is analyzed by on-line liquid chromatography, electrospray mass spectrometry (LC/MS). The mass spectral data containing either accurate mass values or sequence specific fragment ion information is then matched to a database of known protein sequences. Key features of the LC/MS system are the use of a novel integrated, microscale LC column-electrospray interface and variable flow solvent delivery to optimize the efficiency of sample loading and gradient elution. With these enhancements, only 10 min is required to analyze each sample. The method is routine for sample amounts ranging from 50 to 500 fmol. The analysis parameters for the ion trap mass spectrometer have to be carefully adjusted in order to keep pace with the rapidly eluting LC peaks. Although designed for rapid LC separations, the integrated column-electrospray interface is also able to provide extended analyses of selected components using a technique known as “peak parking. ”     

Selective detection and identification of phosphopeptides by dansyl MS/MS/MS fragmentation

Protein phosphorylation regulates many cellular processes and pathways, such as cell cycle progression, signal transduction cascades and gene expression. Selective detection of phosphopeptides from proteolytic digests is a challenging and highly relevant task in many proteomics applications. Often phosphopeptides are present in small amounts and need selective isolation or enrichment before identification. Here we report a novel approach to label selectively phospho-Ser/-Thr residues by exploiting the features of a novel linear ion trap mass spectrometer. Using dansyl labelling and MS3 fragmentation, we developed a method useful for the large-scale proteomic profiling of phosphorylation sites. The new residues in the sequence were stable and easily identifiable under general conditions for tandem mass spectrometric sequencing.     

Comparison of different search engines using validated MS/MS test datasets

Massive amounts of tandem mass spectra are produced in high-throughput proteomics studies. The manual interpretation of these spectra is not feasible. Instead, search engines are used to match the tandem mass spectra with sequence information contained in proteomics and genomics databases. Typically, these search engines provide a list of the best matching peptide sequences for an individual tandem mass spectrum. As well, they provide scores that are somewhat related to the confidence level in the match. Many peptide tandem mass spectra search engines have been reported. These search engines provide very different results depending on the type of mass spectrometers used and their input parameters. Here we describe a comparative analysis of different search engines using validated test sets of tandem mass spectra. We have defined test sets of MS/MS spectra derived from high throughput proteomics experiments performed by HPLC-ESI-MS/MS on ion trap (LCQ) and tandem quadrupole time-of-flight instruments with a pulsar functionality (Qstar Pulsar) mass spectrometers. We analyzed the ability of the different search engines to identify the correct peptides, and the cross-validations of the different search engines.     

LC/MS and LC/MS/MS determination of protein tryptic digests

Tryptic digests were analyzed by means of online microbore liquid chromatography combined with mass spectrometry (LC/MS) for some common proteins. Following conventional enzymatic digestion with trypsin, the freeze-dried residues were dissolved in high-performance liquid chromatography (HPLC) eluent and subjected to gradient reversed-phase microbore HPLC separation with mass spectrometric detection. The latter was done in the full-scan single or tandem (MS/MS) mass spectrometry mode. The formation of gas-phase ions from dissolved analytes was accomplished at atmospheric pressure by pneumatically assisted electrospray (ion spray) ionization. This produced field-assisted ion evaporation of dissolved ions, which could then be mass-analyzed for molecular mass or structure. In the full-scan LC/MS mode, the masses for the peptide fragments in the tryptic digests can be determined as either their singly or multiply charged ions. When the molecular weights of the peptides lie outside the mass range of the mass spectrometer, the multiply charged feature of these experimental conditions still provides reliable molecular weight determinations. In addition, collision-activated dissociation (CAD) on selected peptide precursor ions provides online LC/MS/MS sequence information for the tryptic fragments. Results are shown for the tryptic digests of horse heart cytochrome c, bovine β-lactoglobulin A, and bovine β-lactoglobulin B.     

An integrated strategy for identification and relative quantification of site-specific protein phosphorylation using liquid chromatography coupled to MS2/MS3

Reversible and differential multisite protein phosphorylation is an important mechanism controlling the activity of cellular proteins. Here we describe a robust and highly selective approach for the identification and relative quantification of site-specific phosphorylation events. This integrated strategy has three major parts: visualisation of phosphorylated proteins using fluorescently stained polyacrylamide gels, determination of the phosphorylation site(s) using automatic MS3 triggered by the loss of phosphoric acid, and relative quantification of phosphorylation by integrating MS2- and MS3-extracted ion traces using a fast-scanning, linear ion trap mass spectrometer. As a test case, recombinant sucrose-phosphate synthase (SPS) from Arabidopsis thaliana (At5g1110) was used for identification and quantification of site-specific phosphorylation. The identified phosphorylation site of the actively expressed protein coincides with the major regulatory in vivo phosphorylation site in spinach SPS. Site-specific differential in vitro phosphorylation of native protein was demonstrated after incubation of the recombinant protein with cold-adapted plant leaf extracts from A. thaliana, suggesting regulatory phosphorylation events of this key enzyme under stress response.     

Use of an integrated MS--multiplexed MS/MS data acquisition strategy for high-coverage peptide mapping studies

Liquid chromatography/mass spectrometry (LC/MS) peptide maps have become a basic tool for characterizing proteins of biological and pharmaceutical interest. The ability to generate reproducible maps with high protein sequence coverage is a central goal of methods development. We have applied a recently developed analytical approach (termed LC/MS(E)) to LC/MS peptide mapping. Using the LC/MS(E) approach, the mass detector alternates between a low-energy scanning mode (MS) for accurate mass peptide precursor identification, and an elevated-energy mode (MS(E)) for generation of accurate mass multiplex peptide fragmentation data. In this paper, we evaluate this analytical approach against a tryptic digest of yeast enolase. From the low-energy data, high peptide map coverage (98% of sequence from peptides >3 amino acids) was reproducibly obtained. The MS signal for essentially equimolar peptides varied over 2 orders of magnitude in intensity, and peptide intensities could be precisely and reproducibly measured. Using the temporal constraint that MS(E) peptide fragment ions exhibit chromatographic profiles that parallel the precursor ions that generated them, we were able to produce accurate mass time-resolved MS/MS information for all enolase peptides with sufficient abundance to produce a detectable fragment ion.     

On-line strong cation exchange micro-HPLC-ESI-MS/MS for protein identification and process optimization

We have developed an on-line strong cation exchange (SCX)-ESI-MS/MS platform for the rapid identification of proteins contained in mixtures. This platform consists of a SCX precolumn followed by a nanoflow SCX column on-line with an electrospray ion trap mass spectrometer. We also used this platform to study the dynamics of peptide separation/extraction by SCX, in particular to understand the parameters affecting the performance of SCX in multidimensional chromatography. For example, we have demonstrated that the buffer typically used for tryptic digestion of protein mixtures can have a detrimental effect on the chromatographic behaviour of peptides during SCX separations, thereby affecting certain peptide quantitation approaches that rely on reproducible peptide fractionation. We have also demonstrated that band broadening results when a step (discontinuous) gradient approach is used to displace peptides from the SCX precolumn, reducing the separation power of SCX in multidimensional chromatography. In contrast, excellent chromatographic peak shapes are observed when a defined (continuous) gradient is used. Finally, using a tryptic digest of a protein extract derived from human K562 cells, we observed that larger molecular weight peptides are identified using this on-line SCX approach compared to the more conventional reverse phase (RP) LC/MS approach. Both methods used in tandem complement each other and can lead to a greater number of peptide identifications from a given sample.     

LC/MS and LC/MS/MS based protocol for identification of dyes in historic textiles

Identification of dyes in historic textiles was until recently only based on reversed phase liquid chromatography and diode-array detection (RPLC–DAD). Although in the last years mass spectrometry (MS) is increasingly used as a detection system for liquid chromatography, most applications in the field are directed to identification of the molecular ions or in studies dedicated to degradation products which may be used as markers in RPLC–DAD. In the present work, an analytical protocol for the identification of dyes using RPLC/ESI/MS is presented. Atmospheric pressure electrospray ionization (ESI) was applied, in the negative ion monitoring mode. Both single stage and tandem MS (MS/MS) approaches were considered. An ion trap was used as mass analyzer. Experiments are based on the characterization of standards (natural dyes and/or dyed fibers) with the mass spectrometer sequentially working in the following modes: single MS/full scan, followed by plotting chromatograms through ion extraction (IEC) according to mass/charge ratios corresponding to molecular ions; single MS/selected ion monitoring (SIM) mode; tandem MS/single reaction monitoring (SRM) mode; tandem MS/multiple reactions monitoring (MRM) or product ion scanning modes. A faster chromatographic separation could be applied as MS detection readily balanced the selectivity of the analytical process. In a case study, 11 dyes from 3 biological sources were detected in a 0.5 mg historic sample.     

Application of a text search system based on boolean strategy to mass spectral data identification

A general algorithm for text searching, operated on a tape-based minicomputer, has already been reported. This paper presents the application of the general text-searching algorithms to the Registry of Mass Spectral Data of 18,806 different entries. The text format allows multi-information input to be used to search the spectral library on the basis of data not necessarily extracted from mass spectra. Two library files have been generated; one is approximately half the size of the other, less important information having been deleted. The shorter library contains all 18,806 entries but enjoys much faster search times. Batch processing of searches is also possible. The text search is shown to be versatile in its operation, as the user can construct searches to be either broad or very selective, depending on the application. The search also has the capability to examine the data base internally and to check certain data for their validity.     

The effects of mass accuracy,data acquisition speed,and search algorithm choice on peptide identification rates in phosphoproteomics

Proteomic analyses via tandem mass spectrometry have been greatly enhanced by the recent development of fast, highly accurate instrumentation. However, successful application of these developments to high-throughput experiments requires careful optimization of many variables which adversely affect each other, such as mass accuracy and data collection speed. We examined the performance of three shotgun-style acquisition methods ranging in their data collection speed and use of mass accuracy in identifying proteins from yeast-derived complex peptide and phosphopeptide-enriched mixtures. We find that the combination of highly accurate precursor masses generated from one survey scan in the FT-ICR cell, coupled with ten data-dependent tandem MS scans in a lower-resolution linear ion trap, provides more identifications in both mixtures than the other examined methods. For phosphopeptide identifications in particular, this method identified over twice as many unique phosphopeptides as the second-ranked, lower-resolution method from triplicate 90-min analyses (744 ± 50 vs. 308 ± 50, respectively). We also examined the performance of four popular peptide assignment algorithms (Mascot, Sequest, OMSSA, and Tandem) in analyzing the results from both high-and low-resolution data. When compared in the context of a false positive rate of approximately 1%, the performance differences between algorithms were much larger for phosphopeptide analyses than for an unenriched, complex mixture. Based upon these findings, acquisition speed, mass accuracy, and the choice of assignment algorithm all largely affect the number of peptides and proteins identified in high-throughput studies. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Application of a temperature-controllable microreactor to simple and rapid protein identification using MALDI-TOF MS

We have carried out a simultaneous thermal denaturation and trypsin digestion of proteins using a temperature-controllable microreactor. This is a simple and rapid sample preparation technique for use before matrix-assisted laser desorption ionization time-of-flight mass spectrometry. In contrast to a conventional sample preparation method, which involves several chemical treatments, our sample preparation was performed using only trypsin digestion with the thermal denaturation of the target protein. Optimization of the reactor operational parameters for trypsin digestion using a temperature-controllable microreactor was carried out. The entire trypsin digestion procedure took about 11 min, and consisted of 1 min for the thermal denaturation of the sample protein (3 microl, 0.2 microM) at 85 degrees C, and 10 min for digestion of the protein at 37 degrees C. The resulting sequence coverage ranged from 24% to 57%, which was sufficient for practical protein identification.     

Protocols for optimizing MS/MS parameters with an ion-trap GC-MS instrument

The product ion spectrum allows us to achieve very selective detection of pesticides and to eliminate the ambiguities caused by more conventional analytical approaches. Owing to the enhanced capabilities of GC/MS/MS for multiresidue pesticides, the development of a GC/MS/MS pesticides library will be useful. The aim of this study was to develop a sensitive and specific analytical method for the identification and quantification of compounds without the need of a time-consuming procedure. Two methods were studied in order to optimize the nonresonant conditions of dissociation of five pesticides (deltamethrin, metalaxyl, myclobutanil, procymidone, pirimicarb). The first permits a systematic investigation of the influence of the qz trapping parameter on sensitivity in precursor ion detection and on the efficiency of collision-induced dissociation (CID). The second is more suited for analytical laboratories and less time-consuming and allows us to reach similar results: the experiments were conducted step by step at a constant stability parameter.     

Atmospheric molding of ionic copolymer MALDI-TOF/MS arrays: a new tool for protein identification/profiling

An atmospheric molding protocol has been used to prepare an ionic methacrylate-based copolymer sample support chips for MALDI (pMALDI)-MS by targeting selected groups of various monomers copolymerized during molding, namely, carboxy, sulfo, dimethylalkyamino, and trimethylalkylammonium groups. The new disposable array chips provide analyte-oriented enhancement of protein adsorption to the modified substrates without requiring complicated surface coating or derivatization. The MALDI-MS performance of the new ionic copolymer chips was evaluated for lysozyme, beta-lactoglobulin A, trypsinogen and carbonic anhydrase I using washing with solutions prepared in pH or ionic strength steps. On cationic chips, the proteins are washed out at pH lower than their p/ values, and on anionic chips at pH higher than their p/ values. The ability of the microfabricated pMALDI chip set to selectively adsorb different proteins from real samples and to significantly increase their MS-signal was documented for the transmembrane photosystem I protein complex from the green alga Chlamydomonas reinhardtii. The proteins were almost exclusively adsorbed according to calculated pI values and grand average of hydropathy (GRAVY) indexes. The new disposable chips reduce manipulation times and increase measurement sensitivity for real-world proteomic samples. The simple atmospheric molding procedure enables additional proteomic operations to be incorporated on disposable MALDI-MS integrated platforms.     

LC/MS/MS identification of some folic acid degradation products after E-beam irradiation

Folates belong to the B vitamin group based on the parental compound folic acid (FA). They are involved in important biochemical processes like DNA synthesis and repair. FA is composed of a pteridine ring, p-aminobenzoic acid and glutamate moieties. The human metabolism is not able to synthesize folates and therefore obtain them from diet. FA, a synthetic vitamin, is used as a food fortificant because of its low price, relative stability and increased bioavailability compared to natural folate forms. FA is known to be a sensitive compound easily degradable in aqueous solution by ultraviolet and visible light towards various by-products. Irradiation is a process for preservation of foods that uses accelerated electrons, gamma rays or X-rays. Irradiation is proposed for the treatment of various food products, eliminating or reducing pathogens and insects, increasing the storage time and replacing chemical fumigants. This study concerns the identification of degradation products of FA after E-beam irradiation. FA aqueous solutions were irradiated with a Van de Graaff electrons beam accelerator (2 MeV, 100 μA current, 20 cm scan width, dose rate about 2 kGy/s). Applied doses were between 0 (control) and 10.0 kGy. Absorbed doses were monitored with FWT 60.00 radiochromic dosimeters.     

Structural identification of degradants of moexipril by LC–MS/MS

A gradient LC–MS method was developed for the identification and characterization of degradants of moexipril using liquid chromatography electrospray ionization tandem mass spectrometry (LC/ESI‐MS/MS). Moexipril was subjected to hydrolysis (acid, base and neutral), oxidation, photolytic and thermal degradation conditions as mentioned in ICH guidelines Q1A (R2). The drug degraded under hydrolysis, oxidation and photolytic conditions, but it was stable under thermal conditions. In total, five degradants were formed and separated on an Agilent XDB C‐18 column (4.6 × 150 mm, 5 μm) in a gradient elution method. Four degradants ( D1 , D2 , D4 and D5 ) under acidic conditions, three degradants ( D2 , D3 and D4 ) under basic conditions and three degradants ( D1 , D4 and D5 ) under neutral and oxidative stress conditions were formed. In addition, two degradants ( D4 and D5 ) were formed under photolytic stress conditions. To elucidate the structures of degradants, fragmentation of moexipril and its degradants was studied using LC–MS/MS experiments and accurate mass measurements (HRMS) data. The fragment ions in the product ion tandem mass spectra of all the degradants were compared with those of moexipril and assigned the probable structures for the degradants.     

In vivo metabolite detection and identification in drug discovery via LC-MS/MS with data-dependent scanning and postacquisition data mining

An important aspect in drug discovery is the early structural identification of the metabolites of potential new drugs. This gives information on the metabolically labile points in the molecules under investigation, suggesting structural modifications to improve their metabolic stability, and allowing an early safety assessment via the identification of metabolic activation products. From an analytical point of view, metabolite identification still remains a challenging task, especially for in vivo samples, in which they occur at trace levels together with high amounts of endogenous compounds. Here we describe a method, based on LC-ion trap tandem MS, for the rapid in vivo metabolite identification. It is based on the automatic, data-dependent acquisition of multiple product ion MS/MS scans, followed by a postacquisition search, within the entire MS/MS data set obtained, for specific neutral losses or marker ions in the tandem mass spectra of parent molecule and putative metabolites. One advantage of the method is speed, since it requires minimum sample preparation and all the necessary data can be obtained in one chromatographic run. In addition, it is highly sensitive and selective, allowing detection of trace metabolites even in the presence of a complex matrix. As an example of application, we present the studies of the in vivo metabolism of the compound MEN 15916 (1). The method allowed identification of monohydroxy ([M + H](+) = m/z 655), dihydroxy ([M + H](+) = m/z 671), and trihydroxy ([M + H](+) = m/z 687) metabolites, as well as some unexpected biotransformation products such as a carboxylic acid ([M + H](+) = m/z 669), a N-dealkylated metabolite ([M + H](+) = m/z 541), and its hydroxy-analog ([M + H](+) = m/z 557).