NHC-catalyzed enantioselective [2 + 2] and [2 + 2 + 2] cycloadditions of ketenes with isothiocyanates

The enantioselective N-heterocyclic carbene-catalyzed formal [2 + 2] and [2 + 2 + 2] cycloaddition of ketenes and isothiocyanates were developed. Reaction with N-aryl isothiocyanates at room temperature favors the [2 + 2] cycloaddition, while reaction with N-benzoyl isothiocyanates at -40 °C favors the [2 + 2 + 2] cycloaddition.     

Rhodium N-heterocyclic carbene-catalyzed [4 + 2] and [5 + 2] cycloaddition reactions

[reactions: see text] A rhodium complex of N-heterocyclic carbene (NHC) has been developed for intra- and intermolecular [4 + 2] and intramolecular [5 + 2] cycloaddition reactions. This is the first use of a transition-metal NHC complex in a Diels-Alder-type reaction. For the intramolecular [4 + 2] cycloaddition reactions, all the dienynes studied were converted to their corresponding cycloadducts in 91-99% yields within 10 min. Moreover, up to 1900 turnovers have been obtained for the intramolecular [4 + 2] cycloaddition at 15-20 degrees C. For the intermolecular [4 + 2] cycloadditions, high yields (71-99%) of the corresponding cycloaddition products were obtained. The reaction time and yield were highly dependent upon the diene and the dienophile. For the intramolecular [5 + 2] cycloaddition reactions, all the alkyne vinylcyclopropanes studied were converted to their corresponding cycloadducts in 91-98% yields within 10 min. However, the catalytic system was not effective for an intermolecular [5 + 2] cycloaddition reaction.     

Highly efficient [2 + 2] intramolecular cyclizations of allenynes under microwave irradiation: construction of fused bicyclic compounds

A palladium [2 + 2] cycloaddition of 1,6- and 1,7-allenyne carboxylates and microwave-mediated [2 + 2] cycloaddition of various 1,n-allenynes were developed and, particularly, the microwave irradiated [2 + 2] cycloaddition of allenynes can provide a simple, general and eco-friendly synthetic method to fused bicyclo[m,2,0]alkadienes.     

Synthesis of silafluorenes by iridium-catalyzed [2 + 2 + 2] cycloaddition of silicon-bridged diynes with alkynes

[reaction: see text] Silicon-bridged 1,6-diynes underwent [2 + 2 + 2] cycloaddition with alkynes in the presence of an iridium(I)-phosphine catalyst to afford densely substituted silafluorene derivatives. Extended silafluorene skeletons were constructed by the [2 + 2 + 2] cycloaddition of tetraynes.     

3 + 2] cycloaddition reactions of 4-alkyl-3-hydroxy-2H-pyrazolo[4,3-c]isoquinolinium inner salts

Heating dipolarophiles with 4-alkyl-3-hydroxy-2H-pyrazolo[4,3-c]isoquinolinium hydroxide inner salts results in [3 + 2] cycloaddition across positions 3a and 5 of the aromatic system to give the [3 + 2] cycloadducts in good yield. When the 4-alkyl substituent is a 2-acetate ester and the methylene group can be deprotonated, a second mode of [3 + 2] cycloaddition becomes available for the resulting anion (across the side chain methine group and position 5 of the aromatic system) and occurs under basic conditions, allowing either of two modes of [3 + 2] cycloaddition to be selected by appropriate choice of reaction conditions.     

[2+2]环加成反应机理的理论研究

[2+2]环加成反应是有机化学中非常重要的一类反应,其机理的研究一直是实验和理论工作者关注的课题之一。本文从理论的角度综述了三类[2+2]环加成反应的反应机理,即简单烯烃或炔烃参与的环加成反应、累积双键体系参与的环加成反应以及稀土钍化合物参与的环加成反应, 得出对于简单的烯烃或炔烃之间的环加成反应一般是按双自由基机理进行,而其他两类反应主要按协同或两性离子方式进行,并且从前线分子轨道作用理论角度分析了产生不同反应机理的原因。     

Study on the reactivity of oxabicyclic alkenes in ruthenium-catalyzed [2+2] cycloadditions

The ruthenium-catalyzed [2+2] cycloadditions of various bicyclic alkenes with an alkyne have been investigated. The presence of the oxygen in the bridgehead of the bicyclic alkene significantly enhanced the rate of the ruthenium-catalyzed [2+2] cycloadditions. The presence of a C1-substituent on the oxanorbornadiene decreased the rate of the cycloaddition and electron-withdrawing C1-substituents were found to be more reactive than electron-donating C1-substituents in the Ru-catalyzed [2+2] cycloaddition. The nature of the substituent on the benzene ring of oxabenzonorbornadienes showed little effect on the rate of the cycloaddition.     

Highly enantioselective synthesis of silahelicenes using Ir-catalyzed [2+2+2] cycloaddition

Silahelicenes, which contain two silole moieties in a helically chiral structure, were synthesized by a chiral Ir-catalyzed intermolecular [2+2+2] cycloaddition of tetraynes with diynes along with a Ni-mediated intramolecular [2+2+2] cycloaddition. The photophysical properties of the obtained highly enantiomerically enriched silahelicenes (up to 93% ee) were also measured.     

Asymmetric Brønsted Base Catalyzed and Directed [3+2] Cycloaddition of 2‐Acyl Cycloheptatrienes with Azomethine Ylides

Conjugated cyclic trienes have the potential for different types of cycloaddition reactions. In the present work, we will, in a novel asymmetric cycloaddition reaction, demonstrate that the organocatalytic reaction of 2‐acyl cycloheptatrienes with azomethine ylides proceeds as a [3+2] cycloaddition, which is in contrast to the Lewis acid‐catalyzed reaction, in which a [3+6] cycloaddition takes place. In the presence of a chiral organosuperbase, 2‐acyl cycloheptatrienes react in a highly enantioselective manner in the [3+2] cycloaddition with azomethine ylides, providing the 1,3‐dipolar cycloaddition product in high yields and up to 99 % ee. It is also shown that the diene formed by the reaction can undergo stereoselective dihydroxylation, bromination, and cycloaddition reactions. Finally, based on experimental observations, some mechanistic considerations are discussed.     

Diels-Alder approach to biaryls: elucidation of competing tandem [2+2] cycloaddition/[1,3] sigmatropic shift pathway

Reaction of 2-halo-6-nitrophenylacetylene with an electron deficient diene gives rise to a [4+2] cycloaddition/cycloreversion biaryl product and a bicyclo[4.2.0]octadiene resulting from a competing [2+2] cycloaddition pathway. The cyclobutene can be opened to give a mixture of cyclooctatriene and biaryl in varying amounts depending on heat and light exposure. The conversion of the cyclobutene into biaryl occurs through a [1,3] sigmatropic carbon shift followed by [4+2] cycloextrusion of ethylene gas.     

Mechanically facilitated retro [4+2] cycloadditions

Poly(methyl acrylate)s (PMAs) of varying molecular weights were grown from a [4+2] cycloaddition adduct of maleimide with furan containing two polymerization initiators. Subjecting the corresponding PMA (>30 kDa) chains to ultrasound at 0 °C resulted in a retro [4+2] cycloaddition reaction, as observed by gel permeation chromatography (GPC) and UV-vis spectroscopy, as well as labeling of the liberated maleimide and furan moieties with appropriate chromophores featuring complementary functional groups. Similar results were obtained by sonicating analogous polymers that were grown from a thermally robust [4+2] cycloaddition adduct of maleimide with anthracene. The generation of anthracenyl species from these latter adducts allowed for the rate of the corresponding mechanically activated retro [4+2] cycloaddition reaction to be measured. No reduction in the number average molecular weight (M(n)) or liberation of the maleimide, furan, or anthracene moieties was observed (i) for polymers containing the cycloaddition adducts with M(n) < 20 kDa, (ii) for high molecular weight PMAs (M(n) > 60 kDa) featuring terminal cycloaddition adducts, or (iii) when the cycloaddition adducts were not covalently linked to a high molecular weight PMA. Collectively, these results support the notion that the aforementioned retro [4+2] cycloaddition processes were derived from a vectorially opposed mechanical force applied to adducts embedded within the polymer chains.     

Intramolecular [2+2+2] cycloaddition reactions of yne-ene-yne and yne-yne-ene enediynes catalysed by Rh(I): experimental and theoretical mechanistic studies

N-tosyl-linked open-chain yne-ene-yne enediynes 1 and 2 and yne-yne-ene enediynes 3 and 4 have been satisfactorily synthesised. The [2+2+2] cycloaddition process catalysed by the Wilkinson catalyst [RhCl(PPh(3))(3)] was tested with the above-mentioned substrates resulting in the production of high yields of the cycloadducts. Enediynes 1 and 2 gave standard [2+2+2] cycloaddition reactions whereas enediynes 3 and 4 suffered β-hydride elimination followed by reductive elimination of the Wilkinson catalyst to give cycloadducts, which are isomers of those that would be obtained by standard [2+2+2] cycloaddition reactions. The different reactivities of these two types of enediyne have been rationalised by density functional theory calculations.     

Pseudo-bimolecular [2+2] cycloaddition studied by time-resolved photoelectron spectroscopy

The first study of pseudo‐bimolecular cycloaddition reaction dynamics in the gas phase is presented. We used femtosecond time‐resolved photoelectron spectroscopy (TRPES) to study the [2+2] photocycloaddition in the model system pseudo‐gem‐divinyl[2.2]paracyclophane. From X‐ray crystal diffraction measurements we found that the ground‐state molecule can exist in two conformers; a reactive one in which the vinyl groups are immediately situated for [2+2] cycloaddition and a nonreactive conformer in which they point in opposite directions. From the measured S₁ lifetimes we assigned a clear relation between the conformation and the excited‐state reactivity; the reactive conformer has a lifetime of 13 ps, populating the ground state through a conical intersection leading to [2+2] cycloaddition, whereas the nonreactive conformer has a lifetime of 400 ps. Ab initio calculations were performed to locate the relevant conical intersection (CI) and calculate an excited‐state [2+2] cycloaddition reaction path. The interpretation of the results is supported by experimental results on the similar but nonreactive pseudo‐para‐divinyl[2.2]paracyclophane, which has a lifetime of more than 500 ps in the S₁ state.     

Trifluoromethyl groups in crystal design of 1,4-diphenyl-1,3-butadienes for topochemical [2 + 2] photodimerization

[structure: see text] UV irradiation of the powdered crystalline sample of each of three (E,E)-1,4-di(trifluoromethyl-substituted)phenyl-1,3-butadienes (1-3) was found to yield a single [2 + 2] cycloaddition product in the solid state. Moreover, upon irradiation, the crystalline samples of two (E,E)-1,4-di(trifluoromethyl- and fluorine-substituted)phenyl-1,3-butadienes (4, 5) undergo a similar conversion to afford a [2 + 2] cycloaddition product, respectively. Our observations suggest that trifluoromethyl groups can be used to direct 1,4-diphenyl-1,3-butadiene molecules to form a parallel, offset-stacked orientation suitable for topochemical [2 + 2] cycloaddition.     

Dihydrobiphenylenes through Ruthenium‐Catalyzed [2+2+2] Cycloadditions of ortho‐Alkenylarylacetylenes with Alkynes

A new synthetic route to dihydrobiphenylenes has been developed. The process involves a mild Ru^II‐catalyzed [2+2+2] dimerization of ortho‐alkenylarylacetylenes or its more versatile variant, the Ru‐catalyzed [2+2+2] cycloaddition of ortho‐ethynylstyrenes with alkynes. Mechanistic aspects of this [2+2+2] cycloaddition are discussed.     

Rhodium-catalyzed [2 + 2 + 2] cycloaddition of alkenyl isocyanates and alkynes

A rhodium(I)-catalyzed [2 + 2 + 2] cycloaddition between alkenyl isocyanates and alkynes has been developed. Heating a mixture of an alkenyl isocyanate and a symmetrical internal alkyne in the presence of [Rh(ethylene)2Cl]2/P(4-OMe-C6H4)3 in toluene delivers substituted indolizinones and quinolizinones. Depending on the substrates, a rare fragmentation of the isocyanate unit can be involved within the cycloaddition process to furnish a vinylogous amide embedded in the indolizinone.     

Identifying Multinuclear Organometallic Intermediates in On‐Surface [2+2] Cycloaddition Reactions

We investigate the on‐surface [2+2] cycloaddition reaction of 2,3,6,7,10,11‐hexabromotriphenylene (HBTP) on Ag(111), Cu(111), Au(111), and Cu‐dosed Au(111) surfaces using STM and DFT simulation focusing on the organometallic intermediates. The fully debrominated HBTP molecules form an organo‐silver framework on Ag(111) and an organo‐copper framework on Cu(111), both incorporating multinuclear metal adatom clusters. The organo‐silver framework is converted into porous covalent networks via [2+2] cycloaddition above 240 °C. In contrast, the organo‐copper framework is very stable and does not undergo [2+2] cycloaddition even at 300 °C. On Au(111), no organo‐gold intermediate of [2+2] cycloaddition is observed. After loading Cu onto Au(111), the partially debrominated HBTP molecules bind to Cu adatom dimers to form multinuclear organo‐copper complexes at 100 °C which undergo [2+2] cycloaddition at 140 °C. This study shows that the choice of surface can direct the reaction pathway.     

Formal [4+2] cycloaddition of di-tert-butyl 2-ethoxycyclobutane-1,1-dicarboxylate with ketones or aldehydes and tandem lactonization

A catalytic amount of tin(IV) chloride catalyzed formal [4+2] cycloaddition reaction of di-tert-butyl 2-ethoxycyclobutane-1,1-carboxylate with ketones or aldehydes to give diethyl 6-ethoxydihydro-2H-pyran-3,3(4H)-dicarboxylates, whereas two equivalents of trimethylsilyl triflate promoted tandem [4+2] cycloaddition and lactonization to afford 3-oxo-2,6-dioxabicyclo[2.2.2]octane-4-carboxylate esters.     

Mechanism, regioselectivity, and the kinetics of phosphine-catalyzed [3+2] cycloaddition reactions of allenoates and electron-deficient alkenes

With the aid of computations and experiments, the detailed mechanism of the phosphine-catalyzed [3+2] cycloaddition reactions of allenoates and electron-deficient alkenes has been investigated. It was found that this reaction includes four consecutive processes: 1) In situ generation of a 1,3-dipole from allenoate and phosphine, 2) stepwise [3+2] cycloaddition, 3) a water-catalyzed [1,2]-hydrogen shift, and 4) elimination of the phosphine catalyst. In situ generation of the 1,3-dipole is key to all nucleophilic phosphine-catalyzed reactions. Through a kinetic study we have shown that the generation of the 1,3-dipole is the rate-determining step of the phosphine-catalyzed [3+2] cycloaddition reaction of allenoates and electron-deficient alkenes. DFT calculations and FMO analysis revealed that an electron-withdrawing group is required in the allene to ensure the generation of the 1,3-dipole kinetically and thermodynamically. Atoms-in-molecules (AIM) theory was used to analyze the stability of the 1,3-dipole. The regioselectivity of the [3+2] cycloaddition can be rationalized very well by FMO and AIM theories. Isotopic labeling experiments combined with DFT calculations showed that the commonly accepted intramolecular [1,2]-proton shift should be corrected to a water-catalyzed [1,2]-proton shift. Additional isotopic labeling experiments of the hetero-[3+2] cycloaddition of allenoates and electron-deficient imines further support this finding. This investigation has also been extended to the study of the phosphine-catalyzed [3+2] cycloaddition reaction of alkynoates as the three-carbon synthon, which showed that the generation of the 1,3-dipole in this reaction also occurs by a water-catalyzed process.     

Halogen effect on tandem [4+2] cycloaddition/aromatization sequence of allenyl 2-halo-3-vinylcyclohex-2-enyl ether

Steric and enthalpic effects of substituents on diene moieties play a crucial role in intramolecular cycloaddition reactions. Allenyl 2-halogenated-3-vinylcyclohex-2-enyl ethers underwent a tandem [4+2] cycloaddition/aromatization reaction to afford the corresponding tetrahydro-3H-naphtho[1,8-bc]furan compound in high yield.