Phonon Raman scattering in Nd1+xBa2−xCu3O7−δ and Pr1+xBa2−xCu3O7−δ single crystals

The polarized Raman spectra of Nd_1+xBa_2−xCu₃O_7−δ (−0.023≤x≤0.107) and Pr_1+xBa_2−xCu₃O_7−δ (0.01≤x≤0.15) single crystals have been investigated. It was found that the Cu(2) A_g mode softens by 6 cm⁻¹ in Nd 1:2:3 and 4 cm⁻¹ in Pr 1:2:3 as x increases. These frequency shifts cannot be explained by the change in the relevant bond lengths due to Nd(Pr)-substitution for Ba. The variations with x of the two low frequency modes may be affected by change of their hybridization and/or change of their force constants. The linewidths of Ba mode in Pr 1:2:3 are broader than those in Y 1:2:3. This result suggests that the Pr substitution on Ba sites occurred even in a very small value of x. In x(yy) geometry the relative intensity of the Ba and O(4) modes in Nd 1:2:3 is greater than those in Pr 1:2:3. The difference between Nd 1:2:3 and Pr 1:2:3 in the relative intensity of the Ba and O(4) modes may be produced by the chains.     

Crystal growth of superconductive PrBa2Cu3O7−y

Superconductive PrBa₂Cu₃O_7−y (Pr123) crystals have been grown successfully by the travelling-solvent floating-zone (TSFZ) method using 3.7–5.8% PrO, 27–37% BaO, and 60–69% CuO composition solution with the 0.1–0.4% oxygen mixed argon gas atmosphere. The grown crystals have been identified to be Pr123 by a precession camera, X-ray powder diffractions and scanning electron microscopy–X-ray energy dispersion spectroscopy (SEM-EDS). Some portion of the grown TSFZ crystal boules show bulk superconductivity below about 80 K after annealing in oxygen.     

Unusual resistivity broadening in the mixed state of NdBa2Cu3O7−δ crystals grown by a crystal-pulling technique

In order to clarify the origin of a strong peak effect in the magnetization curve of NdBa₂Cu₃O_7−δ crystals, we investigated the superconductivity transition behavior of the in-plane resistivity in static magnetic fields up to 8 T. Comparing the results for the samples exhibiting and not exhibiting the peak effect, we found that the former (peak effect sample) shows lower resistivity above the vortex melting temperature. This implies that the pinning force is effective in the vortex liquid state. We also found that the normal state resistivity behaviors of some samples were unusual, indicating inhomogeneous current flow. These results suggest an existence of sheet-like pinning centers perpendicular to the conduction planes.     

Field induced flux pinning in Nd1+xBa2−xCu3O7−δ single crystal

The flux pinning behavior of a Nd_1+xBa_2−xCu₃O_7−δ (Nd123) single crystal, which exhibited a peak effect, has been studied by monitoring the time decay of the magnetic moment. The apparent pinning energy (U₀^*) was deduced from flux creep data on the basis of the Anderson-Kim model. The magnetic field dependence of U₀^* showed maxima at peak fields which depended on the temperatures, in a similar manner to those of critical current densities. In addition, the temperature dependence of U₀^* showed several features. To explain the increase in U₀^* with the field as well as its temperature and field dependence, we made a numerical calculation by introducing an additional pinning energy which increased with increasing field. The results are in good agreement with the experimental data, especially at temperatures above 60 K, where the contribution of field induced pinning centers is believed to be dominant.     

Effect of the RE ionic size on the REBa2Cu3O7−δ ceramics oxygenated at 250 bar

REBa₂Cu₃O_7−δ (RE=Ho, Y, Dy, Gd, Sm, Nd) ceramics have been oxygenated at 1 bar pressure (LP) and, subsequently, at 250 bar (HP). Despite the noticed slight uptake of oxygen (up to the value of 0.07), after the HP processing, the electrical resistivity (ρ) of all samples increased, what was attributed to the deterioration of the grain boundaries. The increase of ρ was much more pronounced and also accompanied by a change of ρ(T) characteristics into a semiconducting-like one in the case of 123 compounds based on REs which ionic size is large enough to form solid solutions of RE_1+xBa_2−xCu₃O_y type (i.e., RE=Gd, Sm, Nd). As shown in the literature, such 123s usually contain more structural defects. Thus, the observed effect may be attributed to the migration of the defects induced by the elevated pressure oxygenation. The defects could be trapped near the grain boundaries resulting in the deterioration of their electrical properties. The possible role of the oxygen-pressure-induced modifications of the impurity phases has been also discussed. The materials obtained in the HP process may be regarded as 3D arrays of superconducting grains coupled by the Josephson junction or weak links only, as was shown in a tunneling experiment.     

Oxygen nonstoichiometry and electrical conductivity of the solid solutions La2−xSrxNiOy (0≤x≤0.5)

Oxygen nonstoichiometry and electrical resistance of a series La_2−xSr_xNiO_y solid solutions, where x=0.0, 0.2 and 0.5 in argon flows at oxygen partial pressures 1.5, 10.2, 49.2, 100 and 286 Pa within the temperature range of 20–1050°C were studied. Nickelate oxygen desorption/sorption spectra when heating–cooling at constant rate demonstrated strong dependence of cation composition of the samples. Unlike La_1.5Sr_0.5NiO_y compounds those of La₂NiO_y and La_1.8Sr_0.2NiO_y have weakly bonded oxygen, capable to exchange reversibly with the gas phase at the temperatures higher than 250°C. The equilibrium values of oxygen nonstoichiometry and specific resistance for the these nickelates were determined at 300–1050°C and p_O2=1.5–286 Pa as a functions of temperature versus oxygen partial pressure. All nickelate studied appear to be p-type conductors with metal electric conductivity at equilibrium states.     

Surface reaction kinetics in oxygen nonstoichiometry re-equilibration of BaTiO3−δ

We report the (bare) surface redox-reaction rate constant that was determined, along with the chemical diffusivity , by a conductivity relaxation technique on Al-doped single crystal and undoped polycrystal BaTiO_3−δ as a function of oxygen activity in its range of −16≤log a_O2≤0 at elevated temperatures of 800–1100 °C. It takes a value in the range of −4<log( /cm s⁻¹)≤−1, which is even larger than that of the oxides that are considered best as oxygen membranes. It has been found that the surface reaction step grows more rate controlling as the electronic transference number gets smaller or the electronic stoichiometric composition (δ≈0) is approached. The oxygen potential drop due to the surface reaction was estimated by an oxygen concentration cell technique. The oxygen potential drop grows larger as the stoichiometric composition is approached, that is in accord with the variation of against oxygen activity.     

Effect of oxygen partial pressure on the lower solubility limit of Nd1+xBa2−xCu3O7

The lower solubility limits of Nd_1+xBa_2−xCu₃O₇ (Nd123ss) in 1 bar, 0.2 bar, 0.01 bar, and 0.001 bar oxygen partial pressure (P_O2) were studed by differential thermal analysis (DTA) and X-ray diffraction (XRD). Large relative changes in stability with decreasing P_O2 explain why sharp superconducting transitions can be achieved in P_O2 ≤ 0.01 bar while processing in 0.2 to 1 bar P_O2 tends to produce broad transitions. While the lower solubility limits in 0.01 bar and 0.001 bar P_O2 remain at x = 0.00, the solubility limits in 0.2 bar and 1 bar P_O2 show a narrowing with decreasing temperature. Because of the narrowing of the solubility range in 1 bar P_O2, oxygen annealing of Nd123 initially processed in low P_O2 will result in precipitation of second phases which act as flux pinning centers.     

Oxygen tracer diffusion in La1 − xSrxCoO3

Tracer diffusion of ¹⁸O in dense, polycrystalline La_1−xSr_xCoO₃ for x = 0.1 has been measured in the temperature range 400 to 600 °C and at 500 °C for x = 0.2 at an oxygen partial pressure of 1 × 10⁵ Pa. Depth profiles were obtained by secondary ion mass spectrometry. The diffusion coefficient for La_0.9Sr_0.1CoO₃ is given by D = (17–247) exp[(−232 ± 8 kJ/mole)/RT] cm²/s. This value is several orders of magnitude lower than D extrapolated from the results for x = 0.2 measured in the 700–900 °C temperature range. One possible explanation for the discrepancy is that the two measurements reflect different diffusion paths. As expected, La_0.8Sr_0.2CoO₃ exhibits a higher diffusivity at 500 °C than does La_0.9Sr_0.1CoO₃.     

Intercalation thermodynamics and chemical diffusion of oxygen in the solid solution YBa2Cu3−xCoxO6+δ

The equilibrium oxygen content as a function of the temperature and oxygen pressure was measured for the solid solution YBa₂Cu_3−xCo_xO_6+δ, where x=0, 0.2, 0.4, 0.6, 0.8, by using coulometric titration in the temperature range 600–850°C and oxygen pressures between 10⁻⁵ and 1.0 atm. The change in the partial molar enthalpy and entropy of the intercalated oxygen was determined at different oxygen and cobalt contents. The oxygen chemical diffusion was studied by thermogravimetric relaxation in the oxygen-controlled atmosphere. The thermodynamic data were employed to determine how the chemical diffusion coefficient, the thermodynamic factor and the random-diffusion coefficient depend on oxygen content in specimens with different cobalt concentration. The oxygen intercalation thermodynamics and diffusivity results provide evidence of ordering phenomena on a microscopic scale in the basal plane of the tetragonal solid solution YBa₂Cu_3−xCo_xO_6+δ. A model for the oxygen diffusion is suggested to explain the large difference between the random and tracer diffusion coefficients in YBa₂Cu₃O_6+δ     

Oxygen overdoping in superconducting and non-superconducting Y1−xPrxBa2Cu3Oy

We present the evolution of magnetic and structural properties of Y_1−xPr_xBa₂Cu₃O_y (x0.5 and x=1) single crystals and polycrystalline materials when the oxygen concentration y is varied from under- to overdoping. We have found a monotonous evolution of the Pr Néel temperature for x=1 samples and a maximum of the superconducting critical temperature for the x0.5 samples. The structural properties as detected by X-ray diffraction and Raman spectroscopy show no instabilities when crossing the optimal doping region as was found in the x=0 material.     

Ramans study of Y1−xPrxBa2Cu3O7−δ and YB2Cu3−xZnxO7−δ single crystals

Single crystals with known T_c values of Y_1−xPr_xBa₂Cu₃O_7−δ (Y---Pr1:2:3) and YBa₂Cu_3−xZn_3−xZn_xO_7−δ (Y---Zn1:2:3) systems are studied by Raman measurements. The Raman spectra for (Y---Pr1:2:3) single crystals show that the frequencies of Ba and O_z modes increase as the Pr content increases. The results are consistent with the hole-localization scheme proposed for the suppression of superconductivity in the polycrystalline Y---Pr1:2:3 systems. On the other hand, in the Y---Zn1:2:3 system, all the Raman modes do not change in frequencies. However, the FWHM of the Cu(2) mode increases with the decrease of T_c, indicating strong scattering of charge carriers by the substituted Zn ions in the CuO₂ planes. The induced disorder in the CuO₂ planes may be related with suppression of T_c in the Y---Zn1:2:3 system. Thus, the suppression mechanism in the Y---Zn1:2:3 systems seems to be different from that in the Y---Pr1:2:3 systems.     

Unusual crystal structure of non-superconducting Y1Ba2Cu3O7−x films on buffered silicon substrates

Superconducting common c-axis oriented YBCO films as well as non-superconducting films epitaxially grown at significantly reduced substrate temperatures were deposited by laser ablation on CeO₂/YSZ buffered silicon substrates. The crystal structure of the non-superconducting films measured by XRD is collapsed from the original orthorhombic one, whereas the chemical composition detected using RBS and EDX remains identical. Especially the oxygen content in the non-superconducting material is as high as in the common 90 K superconductor. Thus, the change in the electrical behaviour is only due to a structural modification. The crystallographic model of a simple cubic YBCO perovskite unit cell does not represent completely our experimental results measured on the non-superconducting YBCO. A modified model based on detailed TEM and XRD measurements and known crystal defects of orthorhombic YBCO is proposed.     

AC and DC magnetic studies of critical currents in ceramics of the Ho1−xPrxBa2Cu3O7−δ system

AC magnetic susceptibility measurements were performed for ceramics of the Ho_1−xPr_xBa₂Cu₃O_7−δ system as a function of temperature, frequency, field amplitude and static magnetic field. From the measurements, temperature dependences of intergranular critical currents and corresponding pinning energies at grain boundaries were determined for different Pr concentrations. These critical currents strongly decrease with Pr doping. They are limited by superconductor–insulator–superconductor or superconductor–normal metal–superconductor junctions and for higher Pr concentrations additionally suppressed by flux creep. Also intragranular critical current at 4.3 K was determined as a function of Pr concentration from magnetic hysteresis loops. It is a monotonically decreasing function of Pr doping.     

Oxygen nonstoichiometry of Sr(Co,Fe)O3−δ-based perovskites: I. Coulometric titration of SrCo0.85Fe0.10Cr0.05O3−δ by the two-electrode technique

The p(O₂)–T–δ diagram of perovskite-type SrCo_0.85Fe_0.10Cr_0.05O_3−δ was determined by the coulometric titration technique in the temperature range 770–1250 K at oxygen partial pressures from 8 10⁻¹⁰ to 0.5 atm. Stability of the cubic perovskite phase of SrCo_0.85Fe_0.10Cr_0.05O_3−δ, existing down to the oxygen pressures of 10⁻³–10⁻⁵ atm, was found to be slightly higher than that of SrCo_0.80Fe_0.20O_3−δ, probably due to stabilization of oxygen octahedra neighboring Cr⁴⁺ cations. When the oxygen nonstoichiometry of the Cr-containing perovskite decreases from 0.47 to 0.38, the partial molar enthalpy and entropy for overall oxygen incorporation reaction vary in the ranges −165 to −60 kJ mol⁻¹ and 90 to 150 J mol⁻¹ K⁻¹, respectively. Within the stability limits of the single perovskite phase, the p(O₂)–T–δ diagram can be adequately described by equilibrium processes of oxygen incorporation, cobalt disproportionation and interaction of cobalt and iron cations, with the thermodynamic functions independent of defect concentrations. Increasing grain size in SrCo_0.85Fe_0.10Cr_0.05O_3−δ ceramics from submicron size to 100–200 μm has no effect on the oxygen thermodynamics. The two-electrode coulometric titration technique, based on the alternate use of electrodes for oxygen pumping and e.m.f. measurements, is described and verified by studying oxygen nonstoichiometry of La_0.3Sr_0.7CoO_3−δ and PrO_x.     

Influence of the doping level on the charge distribution among the inequivalent CuO2 layers in Tl2Ba2Ca2Cu3O10−δ : a NMR study

and NMR measurements in the normal and superconducting states of Tl₂Ba₂Ca₂Cu₃O_10−δ with different δ are reported. In the overdoped Tl2223 sample with T_c=117 K (T_c^opt=123 K) and δ₁<δ^opt different temperature dependencies of the Knight shift are revealed for inequivalent CuO₂ layers. For the inner CuO₂ layer with the square oxygen coordination of Cu the decrease of with temperature is more gradual. In going towards the underdoped Tl2223 with T_c=104 K and δ₂>δ^opt the changes of with temperature are found to be the same for both types of copper layers. The quadrupole coupling constants for copper and oxygen from different CuO₂ layers were obtained. From the variations with doping of the valence contribution to the electric field gradient at copper sites, we estimate both the hole numbers at Cu and oxygen sites and the real concentration of mobile hole carriers n_h in each of inequivalent CuO₂ layers. In the overdoped Tl2223 sample the charge density in the inner layer differs from the one in the outer plane (with five-fold oxygen coordination for Cu). Our results show that the inhomogeneity of the charge distribution disappears in the underdoped regime. The results are compared with calculations of the charge distribution among the CuO₂ planes in multilayered cuprates reported by Haines and Tallon [E.M. Haines, J.L. Tallon, Phys. Rev. B 45 (1992) 3127].     

Neutron diffraction study of the U(Pd1−xFex)2Ge2 magnetic structure

The neutron diffraction and magnetic susceptibility studies have shown that the magnetic structure of UPd₂Ge₂ changes dramatically even under very low iron doping. Though the general magnetic structure of pure UPd₂Ge₂ and of 1%Fe-doped samples is the same, the temperature intervals of existence of different magnetic phases are different. The values of transition temperatures, where (i) the ‘square’ modulated longitudinal spin-density wave (LSDW) structure with the propagation vector k=(0; 0; ) starts to transform into the sinusoidal modulated LSDW structure and (ii) the commensurate phase transforms into incommensurate one, shift under the 1%Fe doping to the higher temperatures (from 50 to 65 K and from 80 to 90 K, respectively). In the pure and 1%Fe-doped UPd₂Ge₂, the magnetic transition from the commensurate to incommensurate phase is accompanied by the drastic decrease of the propagation vector k_z. In the 2%Fe-doped sample, besides the Néel point of T_N=135 K, we have found two additional characteristic temperatures of 65 and 93 K. Below 65 K, the material has a simple antiferromagnetic (AF) structure with the propagation vector k=(0; 0; 1) and, at 65 K<T<T_N, the magnetic structure is LSDW with sinusoidal modulation. Over almost the total region 65 K<T<T_N, the LSDW magnetic structure is incommensurate. Only at about 93 K, the propagation vector passes the commensurate value of , whereas at 65<T<93 K and at 93 K<T<T_N. We have found that the magnetic susceptibility and the uranium magnetic moment are sensitive to the transition. With increasing iron concentration to x0.15, the simple AF structure with k=(0; 0; 1) develops over all temperature region up to the Néel point. Below T_N, the uranium magnetic moments are always parallel to the tetragonal c-axis.     

Electrical and structural properties of epitaxially grown Y1Ba2Cu3O7 − x and Y2Ba4Cu8O16 − x thin films using the BaF2 method

Thin films of Cu, Y and BaF₂ are co-condensed in ultrahigh vacuum onto SrTiO₃ (1 0 0)-substrates at room temperature without any additional oxygen supply. It is found that the temperature of the ex situ fluorine-oxygen exchange reaction in flowing wet oxygen essentially determines whether the Y₁Ba₂Cu₃O_{7 − x}-phase (T_ex = 850°C) or the Y₂Ba₄Cu₈O_{16 − x}-phase (T_ex = 800°C) forms or any mixture of both phases in between. Small-angle X-ray diffraction verifies the strictly epitaxial growth of the superconducting phases. The variation of the composition around the ideal 1,2,3-stoichiometry affects only the superconducting and normal conducting properties which are measured using the four-probe Montgomery method. The values of the normal state resistivity and its temperature dependence are discussed in combination with a reduced cross section of the conduction paths in the films.     

Luminescence properties of β-(Ga1−xInx)2O3 solid solutions

In this work, luminescence properties of β-(Ga_1−xIn_x)₂O₃ solid solutions were investigated with the purpose of making the new thermoluminophors for ultraviolet (UV) dosimetry. The doping of aliovalent cation admixture (Mg, Mo) in the β-Ga₂O₃ ceramic sample brings about the appearance of high-temperature thermoluminescence glow peaks with a maximum at 395 and 435 K. The maximum of the thermoluminophor photosensitivity shifts when the composition of solid solution changes.     

Effect of aliovalent ion substitution on the oxide ion conductivity in rare-earth pyrohafnates RE2−xSrxHf2O7−δ and RE2Hf2−x AlxO7−δ (RE=Gd and Nd; x=0, 0.1 and 0.2)

Oxide ion conductivity of the pure and aliovalent ion substituted rare-earth pyrohafnates in the series RE_2−xSr_xHf₂O₇ and RE₂Hf_2−xAl_xO₇ (RE=Gd and Nd; x=0–0.2) has been explored in the temperature range 400°C–700°C for the first time. It is seen that, conductivity is enhanced by doping 5 atom% Sr at the rare–earth site in these systems. Well defined impedance plots due to grain interior and grain boundary resistances were obtained in the Gd pyrohafnate with Sr substitution. The results of the conductivity variation for the pure, Sr and Al doped phases are explained on the basis of pyrochlore structure.