Electroreduction of carbon monoxide on palladium electrodeposits in solutions containing copper ions

It is shown that the electroreduction of CO proceeds on electrolytic deposits of palladium (edPd) in 0.5 M H₂SO₄ + (1–5) mM CuSO₄ + CO(sat) solutions at the potentials more positive than the Cu²⁺/Cu equilibrium potential. Among the CO reduction products, methanol and formaldehyde are identified. The current efficiency with respect to CH₃OH exceeds 75% on edPd formed in 1% PdCl₂+0.5 M H₂SO₄ solutions. In addition, Cu⁺ ions, which probably form complexes with CO, are detected in the solution and are assumed to play the role of intermediate species in the mediator catalysis along with copper adatoms.     

Effect of physicochemical properties of water-propane-2-ol mixture and temperature on thermodynamics of Cu complexation with glycine

The stability constants of Cu²⁺ complexes with glycine are determined by potentiometric method in water-propane-2-ol mixture, i.e., [CuL]⁺, CuL₂ (L = Gly^–) (0.070, 0.167, 0.310 mole fraction of alcohol), and [CuHL]²⁺ (0.070 mole fraction of alcohol) at 298.15, 308.15, and 318.15 K. Thermodynamic characteristics of Cu²⁺ complexation with glycine and the Gibbs energy of transfer of complex species [CuL]⁺ and CuL₂ from water to a mixed solvent are calculated. The solvation-thermodynamic analysis of effects of water-propane-2-ol solvents and of separate solvation contributions of reagents to Cu²⁺ coordination with glycine is performed. The increasing stability of the [CuL]⁺ and CuL₂ complexes in water-propane-2-ol as compared to that in pure water is explained by the increasing energy of solvation of complex species [CuL]⁺ and CuL₂ and by the decreasing energy of solvation of Cu²⁺ and Gly^– ions.__________Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 4, 2005, pp. 311–318.Original Russian Text Copyright © 2005 by Tsurko, Bondarev, Shikhova, Khrebto.     

Numerical Solution of the Problem of the Limiting Current for the Copper Electrodeposition from a Solution of Cupric Sulfate and Sulfuric Acid in Conditions of Natural Convection

Equations for a boundary layer, written in self-similar variables, are integrated numerically to obtain distributions of concentration of ions Cu²⁺, H⁺, and SO₄ ^2–; a hydrodynamic velocity; partial currents of electrolyte components; and the limiting current of copper deposition and determine the Rayleigh number for the system under consideration. The results are compared with an approximate analytical solution obtained earlier.     

The Properties of Cu Ions in Zeolites CuY Studied by IR Spectroscopy

The properties of both Cu²⁺ and Cu⁺ ions in zeolite CuY were followed with NO and CO as probe molecules. Cu²⁺ was found to be located in S_II, S_II*, and S_III sites, whereas Cu⁺ was found in S_II and S_II* sites. The fine analysis of the spectra of Cu²⁺-NO and Cu⁺-CO adducts suggests that both in S_II and in S_II* sites two kinds of Cu cations exist. They differ in the positive charge, which may be related to the varying numbers of AlO₄⁻ in close proximity. The experiments of NO and CO adsorption and desorption evidenced that both Cu²⁺ and Cu⁺ sites of highest positive charge bind probe molecules most strongly but activate them to a lesser extent than the Cu sites of lowest positive charge. The experiments of reduction with hydrogen evidenced that the Cu ions of higher positive charge are first reduced by hydrogen. On the other hand, Cu sites of the lowest positive charge are first oxidized by oxygen. The experiments with CuNaY zeolites of various Cu contents suggest that the first introduced Cu (at low Cu contents) created Cu⁺, which was the most neutralized by framework oxygens. Such Cu cations are the most stabilized by framework oxygens.     

Products of Ag+, Cu+ and Cu2+ Ion Implantation in the Surface of Polycrystalline Cadmium Sulfide as Photocatalysts for the Oxidation–Reduction Reaction of Methylene Blue with Formaldehyde

Semiconductor–semiconductor and molecule (molecular ion)–semiconductor products are formed upon the implantation of Ag⁺, Cu⁺, and Cu²⁺ ions in the CdS surface. Possible mechanisms were examined for their photocatalytic action in the reduction of methylene blue.     

Reduction of Cu2+ to Cu+ in Xerogels Prepared from (3-Aminopropyl)Trimethoxysilane

Silica gels doped with Cu²⁺ ions were prepared from the (3-aminopropyl) trimethoxysilane (APTMOS)/tetraethoxysilane (TEOS) systems. Sols showed a broad absorption peak at 640 nm, suggesting 3–5 coordination of the aminopropyl groups to Cu²⁺. For gels prepared from APTMOS and dried at room temperature, the 640 nm peak decreased and a red-shifted absorption appeared below 400 nm within a few months. The luminescence spectra of the xerogels showed emission bands at 430–470 and 510 nm. The former and latter bands are ascribed to Cu⁺ monomer and dimer emissions, respectively. These results indicate that Cu²⁺ ions are reduced to Cu⁺. When xerogels were prepared from APTMOS/TEOS = 1 (vol/vol), the color of xerogels was blue with an absorption peak at around 670 nm, indicating no reduction of Cu²⁺ ions.     

Effect of Temperature on Oxide Formation in Ligand-Deficient Cu|Cu(II), Ethylenediamine System

The influence of temperature on formation of oxide layers on copper electrode in solutions containing 0.01 M Cu(II), 0.005 M ethylenediamine, and 0.3 M K₂SO₄ as a supporting electrolyte at pH 5.3 is investigated. The rate of net process Cu + Cu²⁺ + H₂O Cu₂O + 2H⁺ proceeding under open-circuit conditions is supposedly controlled by interaction between copper electrode and Cu²⁺ aqua-ions. Well-defined voltammetric peak is observed at –0.75 V (SHE), the height of which may serve as a measure of Cu₂O formation rate. An activation energy and a formal rate constant of the process are found to equal 30 kJ mol^–1 and 0.17 s^–1.     

Alkali metal ion-selective electrodes based on relevant alkali metal ion doped manganese oxides

Potentiometric properties of manganese oxides doped with alkali metal ions (Na⁺, K⁺, Rb⁺ and Cs⁺), which were prepared by heating mixed solutions (starting solution) of each alkali metal and Mn²⁺ ions, were examined. Electrodes based on mixed phases of Nao₄₄MnO₂/Mn₂O₃ and hollandite KMn₈O₁₆/M₂O₃ found by X-ray powder diffraction (XRD) exhibited Na⁺- and K⁺-selective responses with a near-Nernstian slope, respectively, when the molar ratio of alkali metal ion to Mn²⁺ ion in the starting solution was 0.1. When no alkali metal ions were added in the manganese oxide films, no significant potentiometric response was observed to any alkali metal ions. The selectivity coefficients of these electrodes were = 6.7 × 10^–2, = 7.1 × 10^–3, < 9 × 10^–4 and < 9x 10^–4 for the Na_0.44MnO₂/Mn₂O₃, and <4 × 10^–4 <4x 10^–4, =60 × 10^–2 ×10^–4, < 4 × 10^–4, for the KMn₈O₁₆/Mn₂O₃, respectively. Electrodes based on manganese oxides made from mixed solutions of Rb⁺/Mn²⁺ and Cs⁺/Mn²⁺ also responded to the respective primary ions, that is, Rb⁺ and Cs⁺ ions, although XRD patterns for the manganese oxides thus made did not show any peaks except for Mn₂O₃ (bixbyite); it was concluded in these cases that some amorphous type manganese oxides were formed in the Rb⁺/Mn²⁺ and Cs⁺/Mn²⁺ systems and they responded to the respective ions. Conditioning of these electrodes in an aerated indifferent electrolyte solution, 0.1M tetramethylammonium nitrate (TMA-NO₃), for relatively long time, typically more than 2 hours, was found to be a prerequisite for near-Nernstian response to the respective alkali metal ions. During this electrode conditioning, vacant sites (template) suitable in size for selective uptake of primary ions seemed to be formed by releasing the doped alkali metal ions from the solid phase into the adjacent electrolyte solution accompanying oxidation of the manganese oxide film.     

Bismuthiol II as an analytical reagent

Summary The reagent Bismuthiol II completely precipitates palladium at a maximum acidity of 0.3 N in nitric acid, 0.5 N in hydrochloric acid or 1 N in sulphuric acid and also at a maximum p_H of about 8.0. The palladium complex Pd (C₈H₅N₂S₃)₂ is stable even up to a temperature of about 250° C. From a mineral acid solution palladium can be estimated in presence of ions of Fe²⁺, Al, Cr, Th, Ce³⁺, Zr, Ti⁴⁺, UO₂ ²⁺, Be, Mn, Co, Ni, Mg, P0₄ ^3–, AsO₄ ^3–, rare earths, alkalis, alkaline earths, Ce⁴⁺, WO₄ ^2– and MoO₄ ^2– that are not ordinarily precipitated by the reagent. At a p_H of 4.75 to 8.2, EDTA, Na-salt, keeps in solution, besides the above ions, the ions of Tl+, Cu²⁺, Pb, Bi³⁺, As³⁺, Sb³⁺, Zn, Cd, Fe³⁺, CrO₄ ^2–, AsO₃ ^3– and VO₃ ^–. Tartrate, however, at a p_H 6.2–8, keeps all the ions including Sn⁴⁺ in solution except of course Tl⁺, Cu²⁺, Pb and Cd. Separation from Ce⁴⁺, WO₄ ^2–, MoO₄ ^2– and AsO₄ ^3– at a low p_H require the presence of tartrate. Ag⁺, Hg²⁺ and also Pb may be complexed with potassium iodide at a p_H 6–8. Tl⁺ and Ag⁺ may also be separated in presence of cyanide in an acetate buffer when palladium remains in solution and from which it may be re-precipitated by acidification.Part II see Z. analyt. Chem. 154, 413 (1957).     

The effect of carbonyl complexation on highly exothermic vanadium oxidation reactions

The effects of CO complexation on highly exothermic vanadium oxidation reactions is evaluated. We study the chemiluminescent (CL) reaction products formed when vanadium vapor entrained in Ar or CO is oxidized by O₃ or NO₂. The multiple collision V+Ar+O₃→VO^*(C ⁴Σ⁻, ⁴Φ, ²X)+Ar+O₂ reactive encounter yields two previously unreported VO excited states, whereas the V+Ar+NO₂→VO^*+Ar+NO reactive encounter populates states up to and including VO^* C ⁴Σ⁻. The multiple collision V+nCO+O₃ reactive encounter would appear to form a VOCO excited state complex, emitting in the region 420–560 nm, via the formation and oxidation of V(CO)₂ viz. V(CO)₂+O₃→VOCO^*+CO+O₂ and a relaxed VO excited state emitter via V+nCO+O₃→VO^*+nCO+O₂ where the VO excited state excitation is mediated by V–CO complexation. In complement, the much less exothermic V–NO₂ encounter displays an emission which, in concert with previous studies of CO complexation, suggests the formation of a VO(CO)₂ excited state complex viz. V(CO)₂+NO₂→VO(CO)₂^*+NO. The experiments characterizing CL are complemented by comparative laser-induced fluorescence studies of the VO X ⁴Σ⁻–CO and Ar interactions and their influence on the VO C ⁴Σ⁻–X ⁴Σ⁻ laser-induced excitation spectrum. These studies, in conjunction with further attempts to excite LIF in the 420–560 nm region, suggest that the observed complex emissions result primarily from VO excited state interactions. Complementary time-of-flight mass spectroscopy of vanadium and vanadium-oxide–carbonyl complex formation demonstrates the formation of V(CO), V(CO)₂, V₂(CO), and VOCO, the latter three of which demonstrate clear metastable-ion dissociation peaks for the processes VOCO⁺→V⁺+CO₂, V(CO)₂⁺→V⁺+2CO, and V₂(CO)⁺→V₂⁺+CO, suggesting that these vanadium complexes when formed in a reaction-based environment may be photodissociated with light in the visible and ultraviolet regions.     

Voltammetric determination of mercury (II) in aqueous media using glassy carbon electrodes modified with novel calix[4]arene

A novel calix[4]arene derivative containing benzothiazole group was coated on glassy carbon electrode (GCE) and then applied to the recognition of mercury ion. Cyclic and square wave voltammetric results showed that the modified electrode selectively recognizes Hg²⁺ ion in aqueous media. A new anodic stripping peak at −0.3 V (vs. Ag/Ag⁺) can be obtained by scanning the potential from −0.6 to 0.6 V, and the peak currents are proportional to the Hg²⁺ concentration. The modified electrode in a 0.1 M H₂SO₄+0.01 M NaCl solution shows linear voltammetric response in the range of 25-300 μg l⁻¹ and detection limit of 5 μg l⁻¹ (ca. 2.5×10⁻⁸ M). This modified GCE does not present any significant interference from alkali, alkaline and transition metal ions except for Pb²⁺, Ag⁺ and Cu²⁺ ions. Only 500, 50 and 100-fold molar excess of Pb²⁺, Ag⁺ and Cu²⁺ ions, respectively, can lead to voltammetric response comparable with that of Hg²⁺. The proposed method was successfully applied to determine mercury in natural water.     

ESR and TPD Study of the Interaction of Nitromethane and Ammonia with HZSM-5 and CuZSM-5 Zeolites

The properties of complexes formed on HZSM-5 and CuZSM-5 zeolites in the course of ammonia and nitromethane adsorption are studied. Ammonia adsorbs on CuZSM-5 and forms two species, which decompose at different temperatures T _dec. One is due to the formation of the Cu²⁺(NH₃)₄ complex (T _dec = 450 K), and the other is assigned to ammonia adsorbed on copper(II) compounds, Cu²⁺O^– and Cu²⁺–O^2––Cu²⁺, or CuO clusters (T _dec = 650–750 K). Ammonia adsorption on Cu⁺ and Cu⁰ is negligible compared with that on the Brönsted acid sites and copper(II). Nitromethane adsorbed on HZSM-5 and CuZSM-5 at 400–500 K transforms into a series of products including ammonia. Ammonia also forms complexes with the Brönsted acid sites and copper(II) similar to those formed in the course of adsorption from the gas phase, but the Cu²⁺(NH₃)₄ complexes on CuZSM-5 are not observed. Possible structures of ammonia and nitromethane complexes on Brönsted acid sites and the Cu²⁺ cations in zeolite channels are discussed. The role of these complexes in selective NO _x reduction by hydrocarbons over the zeolites is considered in connection with their thermal stability.     

Catalysis of the reaction of ozone with chloride ions by metal ions in an acidic medium

It was found that VO²⁺, Fe³⁺, Co²⁺, and Cu²⁺ ions catalyze the reaction of O₃ with Cl^- in an acidic medium. The dependence of the rate of Cl₂ liberation in the reaction of O₃ with Cl^- on the concentrations of H⁺, VO²⁺, Fe³⁺, Co²⁺, and Cu²⁺ ions in the reaction solution was studied. A reaction scheme was proposed to explain the experimentally found catalytic effects of these ions. The constants that characterize the steps of the proposed scheme were determined.Translated from Kinetika i Kataliz, Vol. 46, No. 1, 2005, pp. 147–152. Original Russian Text Copyright © 2005 by Levanov, Kuskov, Koiaidarova, Zosimov, Antipenko, Lunin.     

The structure of a potassium-copper complex with six-membered macrocyclic ethylsiloxanolate ligands

The structure of K₂{[EtSiO₂]₆K₂Cu₄[O₂SiEt]₆} · 4n-BuOH, a novel mixed sandwich-like complex of K⁺ and Cu²⁺ with two 6-membered macrocyclic ethylsiloxanolate ligands, was established by means of X-ray study. The ligands have an all-cis configuration and a crown conformation. Four Cu²⁺ and two K⁺ ions form a planar hexagon sandwiched between antiparallel coaxial macrocyclic ligands. The K⁺ ions occupy two opposite apices of the hexagon. The Cu²⁺ ions have square-planar coordination with four siloxanolate O_M atoms, while the K⁺ ions, are coordinated with two O atoms of the solvating butanol molecules, in addition to four O_M atoms. The electric neutrality of the whole complex is due to the two outer-sphere K⁺ counter-ions, each located over one of the two siloxanolate macrocycles, i.e., over the «decks» of the sandwich and coordinated with endocyclic siloxane O_Si atoms, as in crown-ether complexes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 752–756, April, 1993.     

Cathodic Processes in Cu(II) Solutions Containing Glycolic Acid

Voltammetric data for Cu|Cu(II), glycolic acid system, obtained at pH < 4 under potential sweep conditions, is analyzed within a theoretical model describing the mass transport of chemically interacting particles. Accounting for the distribution of the system's components at the electrode surface makes it possible to construct linear Tafel plots normalized to the surface concentration of Cu²⁺ ions, which are treated as electrically active aqua-complexes. The rate of Cu(II) reduction involving two consecutive reactions (Cu²⁺ + e Cu⁺ and Cu⁺ + e Cu) is controlled by the transfer of the first electron with kinetic parameters _c1 = 0.27 ± 0.01 and k _s1 = (1.2 ± 0.2) × 10^–3 cm/s. Another cathodic reaction is observed at higher cathodic polarizations. Well-defined current peaks located at ca. –0.9 V (SHE) increase with both H⁺ and ligand concentration. This process presumably results from the reduction of hydronium ions involving glycolic acid as a labile donor of protons.     

Spectroscopic Characterization of <Emphasis Type="Italic">N,N-bis</Emphasis>(2-{[(2,2-Dimethyl-1,3-Dioxolan-4-yl)Methyl]Amino}Ethyl) N′,N′-Dihydroxyethanediimidamide and Its Complexes

A new dioxime ligand, N,N-bis(2-{[(2,2-dimethyl-1,3-dioxolan-4-yl)methyl]amino} ethyl)N′,N′-dihydroxyethanediimidamide (H₂L), and its mononuclear complexes with Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Cd²⁺ are synthesized. H₂L forms transition metal complexes [Co(LH)₂(H₂O)₂] and [M(LH)₂] (M = Ni²⁺, Cu²⁺) with a metal : ligand ratio of 1 : 2. Complexes [M(H₂L)(Cl)₂] (Zn²⁺, Cd²⁺) have a metal : ligand ratio of 1 : 1. The mononuclear Co²⁺, Ni²⁺, and Cu²⁺ complexes indicate that the metal ions coordinate ligand through its two N atoms, as the most of dioximes. In the Co²⁺ complex, two water molecules and in the Zn²⁺ and Cd²⁺ complexes two chloride ions are also coordinated to the metal ion. The structures of these compounds are identified by elemental analyses, IR, ¹H and ¹³C NMR, electronic spectra, magnetic susceptibility measurements, conductivity, and thermogravimetric analysis.__________From Koordinatsionnaya Khimiya, Vol. 31, No. 7, 2005, pp. 540–544.Original English Text Copyright © 2005 by Canpolat, Kaya.The text was submitted by the authors in English.     

Preconcentration of trace amounts of tungsten on Amberlite XAD-7 for its spectrophotometric determination in hot spring water

A preconcentration procedure, using a short column loaded with Amberlite XAD-7, is proposed for the spectrophotometric determination of traces of tungsten. The procedure is based on the retention of tungsten on the resin after its reduction to a W(V)-thiocyanate complex with tin(II) chloride solution. Interference effects have been shown to be neglible for foreign ions including Ca²⁺, Mg²⁺, Na⁺, SO₄ ^2–, F^–, NO₃ ^–, Cu²⁺, Fe³⁺ and Mo⁶⁺. The procedure has been applied to hot spring water with satisfactory results (Recovery > 95%; relative standard deviation < 5%; relative error < 3%).     

Bismuthiol I as an analytical reagent

Summary Bismuth and palladium have been determined volumetrically after precipitation as bismuthiol I complexes. From 0.1 N hydrochloric acid solutions they are separated from Fe²⁺, Al, Cr, Ce³⁺, Zr, Ti, Zn, Th, UO₂ ²⁺, Be, Mg, Mn, Co, Ni, alkalis, alkaline and rare earths.A mixture of tartrate or citrate and EDTA has been found to be useful for the separation of palladium at a p_H 3.5–8.5 from As, Zn, Bi, Sn⁴⁺, Sb, Fe³⁺, Tl⁺, Cu²⁺, Cd, Pb, Ru³⁺, Os⁴⁺, PO₄ ^3–, Ce⁴⁺, Ir⁴⁺, Rh³⁺, VO₃ ^–, CrO₄ ^2–, AsO₄ ^3–, WO₄ ^2–, MoO₄ ^2– and from all the other ions referred to above. Potassium iodide at p_H 6.0–8.0 and thiosulphate at 6–7 keep Ag, Pb, Hg²⁺ and Au³⁺, Ir⁴⁺, Os⁴⁺ respectively in solution and thus allow a selective precipitation of palladium.Hg²⁺, Pb, Cu²⁺, Ag, Tl⁺, Cd and Pd when present along with bismuth are first removed by the reagent and from the filtrate bismuth is estimated. Sn²⁺, Sb³⁺, Fe³⁺, F^–, VO₃ ^–, PO₄ ^3–, AsO₄ ^3– and CrO₄ ^2– interfere in bismuth determination while only Sn²⁺, Pt⁴⁺ and CN^– interfere in palladium estimation.     

Ternary [Al2O3–electrolyte–Cu] species: EPR spectroscopy and surface complexation modeling

Cu²⁺ binding on γ-Al₂O₃ is modulated by common electrolyte ions such as Mg²⁺, , and in a complex manner: (a) At high concentrations of electrolyte ions, Cu²⁺ uptake by γ-Al₂O₃ is inhibited. This is partially due to bulk ionic strength effects and, mostly, due to direct competition between Mg²⁺ and Cu²⁺ ions for the SO⁻ surface sites of γ-Al₂O₃. (b) At low concentrations of electrolyte ions, Cu²⁺ uptake by γ-Al₂O₃ can be enhanced. This is due to synergistic coadsorption of Cu²⁺ and electrolyte anions, and _. This results in the formation of ternary surface species (SOH₂SO₄Cu)⁺, (SOH₂PO₄Cu), and (SOH₂HPO₄Cu)⁺ which enhance Cu²⁺ uptake at pH < 6. The effect of phosphate ions may be particularly strong resulting in a 100% Cu uptake by the oxide surface. (c) EPR spectroscopy shows that at pH  pH_PZC, Cu²⁺ coordinates to one SO⁻ group. Phosphate anions form stronger, binary or ternary, surface species than sulfate anions. At pH  pH_PZC Cu²⁺ may coordinate to two SO⁻ groups. At pH  pH_PZC electrolyte ions and are bridging one O-atom from the γ-Al₂O₃ surface and one Cu²⁺ ion forming ternary [γ-Al₂O₃/elecrolyte/Cu²⁺] species.     

Amino acid influence on copper binding to peptides: Cysteine versus arginine

Matrix assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry (MS) and theoretical calculations [density functional theory (DFT)] were utilized to investigate the influence of cysteine side chain on Cu⁺ binding to peptides and how Cu⁺ ions competitively interact with cysteine (−SH/SO₃H) versus arginine. Results from theoretical and experimental (fragmentation reactions) studies on [M+Cu]⁺ and [M+2Cu−H]⁺ ions suggest that cysteine side chains (−SH) and cysteic acid (−SO₃H) are important Cu⁺ ligands. For example, we show that Cu⁺ ions are competitively coordinated to the −SH or SO₃H groups; however, we also present evidence that the proton of the SH/SO₃H group is mobile and can be transferred to the arginine guanidine group. For [M+2Cu−H]⁺ ions, deprotonation of the −SH/SO₃H group is energetically more favorable than that of the carboxyl group, and the resulting thiolate/sulfonate group plays an important role in the coordination structure of [M+2Cu−H]⁺ ions, as well as the fragmentation patterns.