The pH and current density dependence of DC electrodeposited CoCu thin films

CoCu thin films were fabricated on a nanocrystalline substrate by DC electrodeposition. It is found that the composition, structure and magnetic properties of the thin films exhibit a strong dependence on the current density and pH values of the bath electrolyte. The effect of annealing as well as the structure–property relation was investigated.     

Effects of surface damage on critical current density in MgB2 thin films

We investigated the influence of surface damage on the critical current density (J_c) of MgB₂ thin films via 140-keV Co-ion irradiation. The J_c(H) of the surface-damaged MgB₂ films was remarkably improved in comparison with that of pristine films. The strong enhancement of J_c(H) caused by a surface damage in MgB₂ films can be ascribed to additional point defects along with an atomic lattice displacement introduced through low-energy Co-ion irradiation, which is consistent with the change in the pinning mechanism, from weak collective pinning to strong plastic pinning. The irreversible magnetic field (H_irr) at 5 K for surface-damaged MgB₂ films with a thickness of 850 and 1300 nm was increased by a factor of approximately 2 compared with that of a pristine film. These results show that the surface damage produced by low energy ion irradiation can serve as an effective pinning source to improve J_c(H) in a MgB₂ superconductor.     

Length dependence of critical current in thin superconductors

The critical current and its dependence on the length of a thin superconducting wire between two normal metals and the voltage difference across the wire at the critical current is calcualted. The latter arises from the conversion of the normal current into supercurrent and vice versa at the contacts. It is found that the critical current is zero when the length of the wire is π coherence lengths or smaller.     

Crystal orientation dependence of the critical current density in a-axis- and c-axis-oriented MgB2 films

We have investigated the critical current density for MgB₂ films having various crystal orientations prepared by using a hybrid physical-chemical vapor deposition system. An enhancement of the critical current density is clearly presented in MgB₂ films with an a-axis or a b-axis orientation rather than a c-axis orientation. X-ray diffraction patterns reveal a suppression of c-axis orientations while a (100) orientation becomes dominant, and the surface morphology of the a-axis-oriented film shows that the orientation of the c-axis-oriented MgB₂ grains parallel to the plane of the substrate. As the a-axis orientation becomes more dominant in the MgB₂ films, the field performance of the critical current density clearly becomes better. These results suggest that the synthesis of MgB₂ with high ab-plane orientations is one of the keys to enhancing the critical current density in MgB₂.     

Anomalous temperature dependence of resistance observed for high TC Y-Ba-Cu-O thin films

Anomalies in the resistance versus temperature plots of some Y-Ba-Cu-O sputtered thin films have been observed. Compositional variations over some portion of the film are found responsible for the appearance of the anomalies. The need for exercising caution in the interpretation of such anomalies is emphasized.     

Angular dependences of critical current density in YBCO thin films with crossed columnar defects

We investigated the dependences of the critical current density J_c on the magnetic field angle θ in YBa₂Cu₃O_7−δ thin films with the crossed configurations of the columnar defects (CDs). To install the crossed CDs, the films were irradiated using the high energetic Xe ions at two angles relative to the c-axis. The additional peak around the c-axis appears in the J_c(θ) for all irradiated films. In lower magnetic fields, the height of the J_c(θ) peak caused by the crossed CDs with the crossing angles θ_i = ±10° was higher than that for the parallel CDs. It is considered that the correlation of the flux pinning by the crossed CDs along the c-axis occurs even in the case of θ_i = ±25°, which was also suggested by the kink behaviors of the scaling parameters of the current–voltage characteristics near 1/3 of the matching field. In higher magnetic fields, on the other hand, the height and width of the J_c(θ) peak for the crossed CD configurations rapidly reduce with increasing the magnetic field compared to the parallel ones. In the crossed CD configurations, the dispersion in the direction of CDs would prevent the correlation of flux pinning along the c-axis in high magnetic fields, which occurs in the parallel CD configurations due to the collective pinning of flux lines including the interstitial flux lines between the directly pinned flux lines by CDs.     

Anomalous angular dependence of critical current in niobium films

An anomalous angular dependence of the critical current is observed in niobium films. This phenomenon manifests itself in the fact that, under small intensities of the external magnetic field, the critical current attains its maximum in a slightly tilted magnetic field. It is found that the position of the maximum depends on the external magnetic field, as well as on the initial conditions under which the samples were kept. A theoretical model is proposed to explain the results obtained. This model takes into account the effect of diamagnetic properties, pinning of vortices, and the initial conditions on the vortex system in Nb films.     

Temperature dependence of dc photoconductivity in CdTe thin films

The temperature dependence of dc photoconductivity in the measuring range 303–417 K has been studied in CdTe thin films having thicknesst < 4000 Å. The photoactivation energy decreases in dark which is explained on the basis of grain boundary (GB) effect. The current lost to recombination at GB space charge region causes a negative effect on the photosensitivity of the films. A decrease in photosensitivity with increase in temperature is attributed to the reduction of photoexcitation process. It is observed that the minority carrier lifetime varies inversely with light intensity which supports the sublinear relationship of photoconductivity with the intensity of light and thereby confirms the defect-controlled photoconductivity in CdTe thin films     

Temperature dependence of SSW linewidth in metallic thin films

Measurements of the standing spin wave linewidth H _n at 17·6 GHz from 6 °K to 400 °K are presented for two permalloy films whose structure is either polycrystalline or epitaxial. It is shown that in both films, H _n is proportional ton ² (n is the mode number). Although H _n is little modified by temperature (20% variation maximum over the entire temperature range), we experimentally state that the slopep of H _n (n ²) is a linear function of the saturation magnetizationM which agrees with a planar inhomogeneity model.The authors wish to thank H. Pascard and F. Hoffmann who have prepared and selected the films as also E. Villain and A. Gatineau for invaluable technical assistance.     

MgB2超导膜的厚度与其Jc(5K,0T)的关系

通过混合物理化学气相沉积法 (hybrid physical-chemical vapor deposition, HPCVD), 在(000l) SiC 衬底上制得一系列从10 nm到8 μm的MgB₂超导膜样品, 并对它们的形貌、超导转变温度T_c 和临界电流密度J_c与膜厚度的关系进行了研究. 观察到T_c随膜厚度增加上升到最大值后, 尽管膜继续增厚, 但T_c值保持近乎平稳, 而J_c则先随膜厚度增加上升到最高值后, 继而则随膜的厚度的增加而下降. MgB₂膜的T_c(0)和T_c(onset)值与膜厚的关系基本一致, T_c(0)在膜厚为230 nm处达到最大值T_c(0)=41.4 K, 而J_c(5K,0T)在膜厚为100 nm时达到最大值, J_c (5 K, 0 T)=2.3×10⁸A·cm^-2, 这也说明了我们能用HPCVD方法制备出高质量干净MgB₂超导膜. 本文研究的超导膜厚度变化跨度非常大, 从10 nm级的超薄膜到100 nm级的薄膜, 再到几微米的厚膜, 如此T_c和J_c对膜厚度变化的依赖就有了较完整、成体系的研究. 并且本文的工作对MgB₂超导薄膜制备的厚度选取具有实际应用意义. 关键词： 2超导膜')" href="#">MgB₂超导膜 混合物理化学气相沉积法 厚度 临界电流密度     

Angular dependence of the critical current density and the temperature scaling of the flux pinning force in YBCO thin film

In this paper, the critical current J_c(Θ) have been investigated as a function of magnetic-field angle Θ. Θ is the angle between the c-axis and the applied magnetic field direction. This investigation concerned three temperature values (60?K, 78?K and 81?K). The normalized pinning force f_p versus the normalized magnetic field h was also studied (f_p?=?F_p / F_pmax and h?=?H / H_max). The F_p expression was determined based on the Kramer model.The studied sample was a single crystal of YBaCuO thin film deposited by the ablation laser method on the surface (100) of a SrTiO₃ substrate.The results of this work show the existence of point core pinning of the normal centers in the low field regime and the occurrence of the flux creep in high field regime.