Synthesis of 2-(halomethyl)-3,4-dihydro-2<Emphasis Type="Italic">H</Emphasis>-pyrido[2,1-<Emphasis Type="Italic">b</Emphasis>][1,3]oxazinium halides

Alkylation of pyridin-2(1H)-one and 5-nitropyridin-2(1H)-one with 4-bromobut-1-ene afforded a mixture of N- and O-butenyl derivatives. 1-(But-3-en-1yl)pyridin-2(1H)-one and 1-(but-3-en-1-yl)-5-nitropyridin- 2(1H)-one reacted with bromine and iodine to give 2-(halomethyl)-3,4-dihydro-2H-pyrido[2,1-b][1,3]-oxazinium halides.     

Tautomerism of Aza heterocycles: V. Structure of the spontaneous transformation products of 5-methyl-2-phenyl-3,3a,4,5,6,7-hexahydro-2H-pyrazolo-[4,3-c]pyridin-3-one in crystal and solution

5-Methyl-2-phenyl-3,3a,4,5,6,7-hexahydro-2H-pyrazolo[4,3-c]pyridin-3-one exists as zwitterion with a proton localized on the nitrogen atom of the piperidine ring and negative charge delocalized over the pyrazololate fragment. The compound is stable in crystal but ustable in solution. Its chromatographic purification and attempts to recrystallize or synthesize by condensation of phenylhydrazine with alkyl 1-methyl-4-oxopiperidin-3-carboxylate on heating in alcohols or benzene lead to the formation of a complex mixture of products. Among these products, we isolated and identified 3a,3a′-methylenebis(5-methyl-2-phenyl-3,3a,4,5,6,7-hexahydro-2H-pyrazolo[4,3-c]pyridin-3-one), 1-methyl-3-(2-phenylhydrazinylidene)pyrrolidin-2-one, and 5-methyl-2-phenyl-3,5,6,7-tetrahydro-2H-pyrazolo[4,3-c]pyridine. The structure of methyl 3-(2-phenylhydrazinylidene)-4,5-dihydro-3H-pyrrole-2-carboxylate and 3a,5-dimethyl-2-phenyl-3,3a,4,5,6,7-hexahydro-2H-pyrazolo[4,3-c]pyridin-3-one was proved by NMR spectroscopy. 3a,5-Dimethyl-2-phenyl-3,3a,4,5,6,7-hexahydro-2H-pyrazolo[4,3-c]pyridin-3-one was isolated as hydrochloride hydrate whose structure was determined by X-ray analysis.     

Synthesis of 1-(1,3-dialkyl-2-oxo-2,3-dihydro-1<Emphasis Type="Italic">H</Emphasis>-imidazo-[4,5-<Emphasis Type="Italic">b</Emphasis>]pyridin-5-yl)-5-oxopyrrolidine-3-carboxylic acids

Nitration of 2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-one gave its 5-nitro derivative which was subjected to alkylation with dimethyl sulfate, diethyl sulfate, and benzyl(dimethyl)phenylammonium chloride. The resulting 1,3-dimethyl-, 1,3-diethyl-, and 1,3-dibenzyl-5-nitro-2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-ones were reduced to the corresponding 1,3-dialkyl-5-amino-2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-ones, and the latter reacted with itaconic acid to produce 1-(1,3-dialkyl-2-oxo-2,3-dihydro-1H-imidazo[4,5-b]pyridin-5-yl)-5-oxopyrrolidine-3-carboxylic acids. 1-(2-Oxo-2,3-dihydro-1H-imidazo[4,5-b]pyridin-5-yl)-5-oxopyrrolidine-3-carboxylic acid was obtained by analogous reaction with 5-amino-2,3-dihydro-1H-imidazo[4,5-b]-pyridin-2-one.     

One step synthesis of 1,5-diaryl pyridin-2(1H)-ones from 2-aryl vinamidinium salts and N-aryl cyanoacetamides

A one step, direct method for the synthesis of 1,5-diaryl pyridin-2(1H)-one derivatives by condensation of 2-aryl vinamidinium salts with N-aryl cyanoacetamides has been developed. This method can conveniently provide the corresponding 1,5-diaryl pyridin-2(1H)-one derivatives with various substituents in good yields and overcome the drawbacks of existing methods such as poor substrate scope, heavy metal pollution, and low yields. The formation mechanism of the products was illustrated.     

A novel kind of dimmer (excimer)-induced-AIE compound 2-phenylisothiazolo[5,4-b]pyridin-3(2H)-one as high selective bisulfite anion probe

An interesting dimmer (excimer)-induced-AIE characteristic of 2-phenylisothiazolo[5,4-b]pyridin-3(2H)-one was observed. By using a ring-opening reaction, we developed a novel fluorescent probe based on sub-micron particles of 2-phenylisothiazolo[5,4-b]pyridin-3(2H)-one in water.     

Formation of pyridin-4(1H)-one versus 1H-azepin-4(7H)-one by treatment of 4-tert-butyldimethylsilyloxy-2-amino-1-aza-bicyclo[4.1.0]hept-3-enes with tetrabutylammonium fluoride

Cycloadducts 3 and 4 were treated with tetrabutylammonium fluoride and rapidly suffer cleavage on the three-membered ring to form either pyridin-4(1H)-one or 1H-azepin-4(7H)-one. When R¹ is an oxycarbonyl or a 2-pyridyl group and R² is a negative charge-stabilizing group (cases 3a,b and 4f) the C-C bond cleaves forming products 5. However, when R²=H (case 3c) the ring expands to seven members. When R¹ is an acyl group the pyridin-4(1H)-one formation includes an unexpected shift of the carbonyl group.     

Divergent synthesis of arylated pyridin-2(1H)-one derivatives via metal-catalysed cross-coupling processes

1,5-Di(hetero)arylated-pyridin-2(1H)-one derivatives have been readily obtained in good yields starting from 2-fluoro-5-pyridylboronic acid. The sequence comprises three steps: (i) palladium-catalysed Suzuki-Miyaura reaction; (ii) base-catalysed hydrolysis; (iii) copper-catalysed C-N coupling. X-ray crystal structures are reported for selected pyridin-2(1H)-one derivatives. These compounds are of interest as new scaffolds for drug discovery.     

Synthesis of 1,2,3,4-tetrahydro-5H-[1]benzopyrano[3,4-c]pyridin-5-ones. I. 3-unsubstituted compounds

Synthesis of 1,2,3,4-tetrahydro-5H-[1]benzopyrano[3,4-c]pyridin-5-ones via a Pechmann condensation of 3-carbethoxy-1-methyl-4-piperidone with various phenols is described. The limitations of this method are discussed. Synthesis of the parent ring system 3a via reduction of 1,2,3,4-tetrahydro-3-(phenylmethyl)-8-[(1-phenyl-1H-tetrazol-5-yl)oxy]-5H-[1]benzopyrano[3,4-c]pyridin-5-one ( 5 ) is also described.     

Quantum-chemical study on the electronic structure and ligand-receptor binding mechanisms of some pyridin-4(1<Emphasis Type="Italic">H</Emphasis>)-one and pyran-4-one derivatives

Molecular structure optimization of a series of pyridin-4-one and pyran-4-one derivatives, namely 5-hydroxy-2-hydroxymethylpyridin-4(1H)-one, 5-hydroxy-1-methyl-4-oxo-1H-pyridine-2-carboxylic acid, and 5-hydroxy-2-hydroxymethylpyran-4-one (kojic acid) as free acids, the corresponding anions, calcium salts, calcium chelates, and calcium chelate calcium salts, was performed ab initio in terms of the restricted Hartree-Fock method with 6-31G* basis set using GAMESS program. The effects of salt and complex formation on the geometric and electronic structure of these molecules were analyzed. The solvation effects were examined by complete geometry optimization of all substrates in terms of the polarized continuum model (PCM) with dielectric constants ? of 10 and 78.3. The energies of formation of the salts and complexes were estimated. A set of geometric parameters responsible for the possibility of ligand-receptor binding with participation of pyran-4-ones and pyridin-4(1H)-ones and probable mechanism of binding of the latter to opioid receptors were proposed on the basis of the calculation data.     

Synthesis of azolo[a]pyridines from 5-(bromomethyl)hept-4-en-3-one and 5-bromopent-3-en-2-one derivatives

Alkyl derivatives of 1H-imidazo[1,2-a]pyridin-4-ium, 5H-pyrido[1,2-a]benzimidazol-10-ium, 1H-[1,2,4]-triazolo[4,3-a]pyridin-4-ium, and 3-methylthiazolo[3,2-a]pyridin-4-ium bromides were obtained in two stages from (4Z)-5-(bromomethyl)-2,2,6,6-tetramethylhept-4-en-3-one, 5-bromo-4-methylpent-3-en-2-one, or (3E)-5-bromopent-3-en-2-one by alkylation of 1-alkyl-1H-imidazoles, 1-alkyl-1H-benz-imidazoles, 1-methyl-1H-1,2,4-triazole, and 4-methylthiazole and subsequent cyclization of the quaternary azolium salts in the presence of bases.     

Synthesis of 4′-substituted 2,2′:6′,2″-terpyridines via a Mitsunobu reaction

Treatment of 2,6-di(pyridin-2-yl)pyridin-4(1H)-one with various appropriately protected ω-substituted primary alcohols or a nucleoside (3,3′-O-diBz-dUrd) in dry THF in the presence of triphenylphosphine and diisopropylazodicarboxylate gives the corresponding 4′-substituted terpyridines in high yield.     

Halogenation of Imidazo[4,5-<Emphasis Type="Italic">b</Emphasis>]pyridin-2-one Derivatives

Chlorination and bromination of 2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-one and its N-methyl-substituted derivatives in acetic acid at 90–95°C leads to formation of the corresponding 5,6-dichloro(dibromo)-2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-ones. Iodination of the same substrates with ICl under analogous conditions yields 6-iodo derivatives. Chlorination of 6-iodo-1,3-dimethyl-2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-one is accompanied by replacement of the iodine atom by chlorine with formation of 5,6-dichloro-1,3-dimethyl-2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-one. Bromination of 6-bromo- and 6-chloro-2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-ones gives 5,6-dibromo- and 5-bromo-6-chloro-2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-ones, respectively.__________Translated from Zhurnal Organicheskoi Khimii, Vol. 41, No. 4, 2005, pp. 586–589.Original Russian Text Copyright © 2005 by Yutilov, Lopatinskaya, Smolyar, Gres’ko.     

Scope and limitations of the synthesis of functionalized quinolizidinones and related compounds by a simple precursor approach via addition of lithium allylmagnesates to 2-pyridones and RCM as key steps

The scope and limitations of the simple synthesis of functionalized quinolizidin-4-ones by chemoselective N-alkenylation of NH pyridin-2(1H)-ones (2-pyridones), regioselective addition of lithium allyl(di-n-butyl)magnesates(1-) to N-alkenylpyridin-2(1H)-ones, followed by ring closing metathesis (RCM) is described. A number of functionalizations introduced into quinolizidin-4-one rings demonstrated the high prospect of the strategy proposed in scaffold synthesis. Their extension to the syntheses of pyrido[1,2-a]azepin-4-one and pyrido[1,2-a]azocin-4-one derivatives as well as to spiro-fused compounds is also presented.     

The synthesis of substituted phenols from pyranone precursors

The syntheses of various substituted phenols from pyranone precursors, namely 4H-pyran-4-one, 3-(benzyloxy)-2-methyl-4H-pyran-4-one (benzyl-maltol), 2,6-dimethyl-4H-pyran-4-one and diethyl 4-oxo-4H-pyran-2,6-dicarboxylate (diethyl chelidonate) are presented. A variety of pronucleophiles were used in combination with tert-butanol as solvent and potassium tert-butoxide as base, using conventional heating methods and microwave conditions.     

Nitration of 1,3-dihydro-2<Emphasis Type="Italic">H</Emphasis>-imidazo[4,5-<Emphasis Type="Italic">b</Emphasis>]pyridin-2-one derivatives

Nitration of 1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-one and its N-methyl derivatives at 0–5°C and 60°C gives 5-nitro-and 5,6-dinitro-1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-ones, respectively. The latter can also be obtained by nitration of 5-mononitro derivatives under similar conditions. The nitration of 6-chloro-and 6-bromo-1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-ones and their N-methyl-substituted analogs leads to the formation of the corresponding 6-chloro(bromo)-5-nitro compounds. The same products are formed in the nitration of 5,6-dichloro-and 5,6-dibromo-1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-ones. In this case, the process involves replacement of the halogen atom in position 5 of the pyridine fragment by nitro group. The nitration of 6-bromo-5-methyl-1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-one is accompanied by oxidation of the 5-methyl group to carboxy.     

Synthesis of 4-(2-chloroethyl)-2,3-dihydro[1,4]oxazino[2,3-b]quinoline and 4-(2-chloroethyl)2,3-dihydropyrido[2,3-b][1,4]oxazine

The title compounds were synthesized from 3-[bis(2-hydroxyethyl)amino]quinolin-2(1H)-one 11a and 3-[bis(2-hydroxyethyl)amino]pyridin-2(1H)-one 18 respectively. The preparation involved a tandem chlorination/cyclization reaction.     

A tandem hetero Diels–Alder/Mannich approach for the synthesis of a versatile hexahydro-2H-pyrano[3,2-c]pyridin-4(3H)-one core

The synthesis of a highly functionalizable hexahydro-2H-pyrano[3,2-c]pyridin-4(3H)-one core is described and sequentially involves a hetero-Diels Alder (HDA) reaction and an intramolecular Mannich reaction resulting in selective formation of the trans-fused ring geometry.     

New methodology for the synthesis of enantiopure (3R,2aR)-(−)-3-phenyl-hexahydro-oxazolo[3,2-a]-pyridin-5-one: a synthesis of (S)-(+)-coniine

A new and efficient methodology for the enantiopure synthesis of (3R,2aR)-(−)-3-phenyl-hexahydro-oxazolo[3,2-a]pyridin-5-one 3 starting from (1′R)-(−)-1-(2′-hydroxy-1′-phenyl-ethyl)-(1H)-pyridin-2-one 1 is described. In addition, the enantiospecific synthesis of (S)-(+)-coniine hydrochloride 6 in good yield from 3 is reported.     

A concise synthesis of 3-substituted-7-amino-6-carboxyl-8-azachromones

We report on an approach to truncate the tricyclic 5H-chromeno[2,3-b]pyridin-5-one core of amlexanox, an approved drug under investigation for the treatment of obesity, to the bicyclic 4H-pyrano[2,3-b]pyridin-4-one (8-azachromone) core. A short, concise synthesis generates a key intermediate with requisite functionality on the pyridyl A-ring and iodo functionality on the 4-pyrone B-ring upon which palladium-catalyzed cross-coupling and subsequent reactions generate representative analogues. One of these shows a 14.2-fold increase in aqueous solubility over amlexanox.     

Nucleophilic trifluoromethylation of RF-containing 4-quinolones, 8-aza- and 1-thiochromones with (trifluoromethyl)trimethylsilane

Reactions of N-substituted 2-polyfluoroalkyl-4-quinolones and 8-aza-5,7-dimethyl-2-polyfluoroalkylchromones with (trifluoromethyl)trimethylsilane proceed mainly as a 1,4-nucleophilic trifluoromethylation to give N-substituted 2,2-bis(polyfluoroalkyl)-2,3-dihydroquinolin-4(1H)-ones and 5,7-dimethyl-2,2-bis(polyfluoroalkyl)-2,3-dihydro-4H-pyrano[2,3-b]pyridin-4-ones after acid hydrolysis. Similar reaction with 2-trifluoromethyl-4H-thiochromen-4-one proceeds as a 1,2-addition to give 2,4-bis(trifluoromethyl)-4H-thiochromen-4-yl trimethylsilyl ether.