A highly selective and sensitive dual-channel chemosensor for cyanide based on sulfahydrazone derivative

A colorimetric and fluorescent cyanide probe bearing naphthol and sulfahydrazone groups has been designed and synthesized. This structurally simple probe displays a rapid response and high selectivity for cyanide in DMSO/EtOH (v/v = 2:8) solution. The addition of CN^? to the sensor p-toluenesulfonyl-2-hydroxy-1-naphthylhydrazone (L3) induced a remarkable color change from pale-yellow to yellow, and green fluorescence changed to yellow. The ¹H NMR titration and DFT calculations suggested that the selective sensing process is based on a nucleophilic addition reaction of cyanide to imine. Test strips based on sensor L3 were fabricated, which could act as a convenient and efficient test kit to detect CN^? for “in-the-field” measurements.     

A new tripodal rhodamine B derivative as a highly selective and sensitive fluorescence chemosensor for copper(II)

A new tripodal rhodamine B derivative 2 was designed and synthesized by tripodal trialdehyde and rhodamine B hydrazide for the first time. This derivative could be used as a fluorescent chemosensor for the selective and sensitive determination of copper(II) in Tris-HCl buffer and ethanol aqueous mixed media. Under the optimum conditions described herein, fluorescence enhancement at 557/577 nm was linearly related to the concentration of copper(II) in the range of 0.10 to 10.00×10⁻⁵ mol·L⁻¹, with a correlation coefficient of R ²=0.9964 (n=15) and a detection limit of 1.129×10⁻⁷ mol·L⁻¹ (the relative standard deviation for five repeated measurements at 4.00×10⁻⁵ mol·L⁻¹ Cu(II) was 2.2%). The absorbance measurements at 557 nm were linearly related to the concentration of Cu(II) in the range of 0.50 to 25.00×10⁻⁵ mol·L⁻¹, with a correlation coefficient of R ²=0.9948 (n=13) and a detection limit of 3.338×10⁻⁷mol·L⁻¹. Supported by the Foundation of the Governor of Guizhou Province, China (Grant No. 200617) and the Talented Person Foundation of Guizhou University (Grant No. 2007039)     

A highly sensitive and selective chemosensor for cyanide

A highly sensitive and selective cyanide chemosensor based on fused indoline and benzooxazine fragment was reported with fast response. The detection of cyanide was performed via the nucleophilic attack of cyanide anion on the oxazine. (1)H NMR and MS studies confirmed the cleavage of C-O bond of oxazine and binding of cyanide to the spiro center of oxazine. The specific reaction results in high selectivity for cyanide ion. Addition of cyanide anion to the oxazine in MeCN/H(2)O solution results in a loss in absorbance at 343 nm and an increase in new absorbance at 411 nm, thus resulting in obvious color changes. Cyanide can be detected down to 1 microM levels in a fast response of less than 30s with no interference of other anionic species. The cyanide detection method should have potential application in a variety of settings requiring rapid and accurate analysis of cyanide anion for drinking and fresh water.     

Highly sensitive and selective chemosensor for Cu2+ detection based on a N-propargyl rhodamine 6G-hydrazide derivative

A novel fluorescence "turn-on" probe for Cu2+ detection has been designed based on a Cu2+ triggered spirolactam ring-opening reaction.The synthetic probe is a double-responsive fluorescent and colorimetric Cu2+-specific sensor.In aqueous solution,it exhibits high selectivity and excellent sensitivity.With a significant color change visible to the naked eye at the concentration of 3 μM(ca.0.19 mg/L),about one magnitude lower than the WHO(World Health Organization) recommended level(2.0 mg/L) for Cu2+ ions in drinking water,the probe could be used to monitor Cu2+ ions in drinking water.     

A ferrocenyl-guanidine derivative as a highly selective electrochemical and colorimetric chemosensor molecule for acetate anions

A highly preorganized chemosensor molecule 1 based on a ferrocenyl-guanidine decorated with a chromogenic aryl azo moiety recognizes the acetate anion in acetonitrile solution. At first, receptor 1 underwent two-step oxidation events. Initially, oxidation of 1 occurs at the Fe(II) centre (E(p) = 440 mV) to form a ferrocenium species, followed by fast electron transfer from the guanidine moiety of the receptor to the Fe(III) centre with concomitant generation of an Fe(II) species with a radical cation centred at the nitrogen atom. In the second step, the radical cation species formed should undergo electrochemical oxidation at higher potential (E(p) = 830 mV). This assumption is supported by spectroelectrochemical studies. A remarkable cathodic shift (182 mV) of the ferrocene/ferrocenium oxidation peak (E(p) = 440 mV) and a progressive red-shift (Δλ = 30 nm) of the low energy band are observed in its absorption spectrum upon complexation of receptor 1 with the acetate anion. This change in the absorption spectrum is accompanied by a colour change from yellow to orange, which can be used for the "naked-eye" detection of this anion. Its monoprotonated form is able to selectively sense the less basic Cl(-), Br(-), NO(3)(-), and HSO(4)(-) anions: the oxidation redox peak at E(p) = 865 mV is cathodically shifted (107-182 mV).     

A simple Schiff base as selective and sensitive fluorescent-colorimetric hydrazine chemosensor

ABSTRACT

A new fluorescent-colorimetric chemosensor L has been synthesised by Schiff base condensation reaction between 1,8-diaminooctane and 4-nitro-benzaldehyde in very good yields. Its photo-luminescent properties and selective detection properties for hydrazine have been examined. The synthesised chemosensor exhibited highly selective fluorescence on-off response for hydrazine amongst a wide range of different metal cations, anions and amines, along with the bare eye colour change from colourless to yellow based on intermolecular hydrogen-bond interaction. The limit of detection of the chemosensor L was estimated as 9.77 × 10^?8 M or 3.12 × 10^?6 g L^?1 for hydrazine which is extremely below the limit set by the World Health Organization (WHO) and the binding stoichiometry was proposed to be 1 : 2 based on ¹H NMR spectroscopic techniques and the Job’s plot analysis. The proposed sensing mechanism is the hydrogen-bonding interaction which has further been established by Density Functional Theory (Functional Density Theory (DFT)) studies. This recognition feature of sensor L makes it an efficient chemosensor for hydrazine detection in different water samples.     

Fluorescein derivative-based, selective and sensitive chemosensor for NADH

Fluorescein mercury acetate (FMA) derivative can be used as a chemosensor for NADH that plays key roles in cellular energy metabolism and dehydrogenase enzymatic reactions. The sensor recognizes NADH by two mercury metal ions in the compound using the metal-anion interaction and its subsequent binding-induced fluorescence changes of FMA. The FMA can detect an aqueous NADH concentration of approximately 1.0 μM and has a high selectivity over various anions including NAD⁺, the oxidized form of NADH.     

A new fluoride selective fluorescent as well as chromogenic chemosensor containing a naphthalene urea derivative

A new naphthalene derivative containing a urea group at the 1,8-position of naphthalene was synthesized and showed a unique absorption and fluorescence peak with a fluoride ion. Calculations suggested that a new peak was attributed to the increased anion character of urea nitrogen due to the strong interaction of the fluoride and N-H protons.     

A rhodamine-cyclen conjugate as a highly sensitive and selective fluorescent chemosensor for Hg(II)

A rhodamine-cyclen conjugate (1) behaves as a highly sensitive and selective fluorescent chemosensor for Hg(2+). The high emission selectivity is due to the formation of 1-Hg(2+) 1:2 complex leading to spirocycle opening of 1.     

A new fluorescein derivative bearing a boronic acid group as a fluorescent chemosensor for fluoride ion

A new fluorescein derivative 1 bearing a boronic acid group was investigated as a fluorescent chemosensor for F-. An off-on type fluorescence enhancement was observed by the blocking of the photoinduced electron transfer mechanism, which was induced by the interaction between fluoride and boronic acid moiety.     

A naked-eye,selective and sensitive chemosensor for fluoride ion

Effect of the addition of six different anions on the absorption and fluorescence spectra of acridine yellow G (AYG) was examined. Only the F⁻ anion could induce a visible color change observable with naked eye and a strong fluorescence quenching with K _SV of 8.3 × 10⁴ mol⁻¹ L in CH₃CN solutions. Calculated results of the interaction between the F⁻ anion and acridine yellow G using the B3LYP/6-31G(d) program showed that the intermolecular charge transfer through the formation of an H-bond between AYG and F⁻ is an essential sensor mechanism.     

A BODIPY derivative as a highly selective "Off-On" fluorescent chemosensor for hydrogen sulfate anion

A new fluorescent receptor for anions has been synthesized by the combination of BODIPY dye and indole moiety. The binding and sensing abilities of receptor toward various anions have been studied by absorption, emission and (1)H NMR titrations spectroscopies. Receptor could act as a highly selective "Off-On" fluorescent sensor for hydrogen sulfate anion in CH(3)CN solvent and CH(3)CN-H(2)O medium. The fluorescence response of receptor toward HSO(4)(-) in CH(3)CN solvent could be due to the suppressed PET (photo-induced electron transfer) process induced by the multiple hydrogen bonding interactions between receptor and HSO(4)(-). In CH(3)CN-H(2)O medium, the HSO(4)(-)-induced change is mainly the consequence of a simple protonation of the CH[double bond, length as m-dash]N- moiety of receptor , which inhibited the PET process and "turned on" the fluorescence of .     

Macrocyclic anthracene-anchored calix[4]arene as a sensitive and selective fluorescent chemosensor for ytterbium ions

ABSTRACT

A novel anthracene anchored cone calix[4]arene pyridine amide receptor C4PA was synthesized and characterized by combination of spectroscopic and spectrophotometric techniques. Ion binding properties of C4PA towards a series of metal cations were investigated by UV and fluorescence spectra. A remarkable increase for receptor C4PA in fluorescence intensity in the presence of trace amounts of Yb³⁺ was observed. C4PA showed “turn on” type fluorescence response toward Yb³⁺ with high selectivity and C4PA also retained its selectivity toward Yb³⁺ in the presence of most competing metal ions.     

A tetra-sulfonamide derivative bearing two dansyl groups designed as a new fluoride selective fluorescent chemosensor

A new fluorescent chemosensor based on an acyclic tetra-sulfonamide derivative linked to two dansyl groups has been conveniently synthesized. Its high selective binding ability to fluoride ions over other halide ions was demonstrated by using fluorescence as well as ¹H NMR spectra.     

Highly selective and sensitive fluorescent chemosensor for Hg in aqueous solution

A new indole-based fluorescent chemosensor 1 was prepared and its metal ion sensing properties were investigated. It exhibits high sensitivity and selectivity toward Hg²⁺ among a series of metal ions in H₂O-EtOH (7:1, v/v). The association constant of the 1:1 complex formation for 1-Hg²⁺ was calculated to be 9.57 × 10³ M⁻¹, and the detection limit for Hg²⁺ was found to be 2.25 × 10⁻⁵ M. Computational results revealed that 1 and Hg²⁺ ion formed with a central tetrahedron-coordinated Hg²⁺.     

A selective and sensitive chemosensor for Cu based on 8-hydroxyquinoline

A novel 8-hydroxyquinoline derivative 3 was synthesized. Significant fluorescent quenching was found in the presence of Cu²⁺ and Hg²⁺ with notably higher selectivity for Cu²⁺ than Hg²⁺.     

A highly selective and sensitive fluorescent chemosensor for Zn^2＋

A new selective Zn^2＋ fluorescent chemosensor, o-vanillin-4-ethoxybenzoylhydrazone （1）, was designed and prepared. Free 1 mainly displayed very weak fluorescence at 480 nm upon excitation at 403 nm. It displayed high selectivity for Zn^2＋ and had a 518- fold fluorescent enhancement upon binding of Zn^2＋, while the other cation ions had only little influence on the fluorescence of 1. Mechanism of enhancement of l＇s fluorescence by Zn^2＋ was briefly discussed.     

Bis-azamacrocyclic anthracene as a fluorescent chemosensor for cations in aqueous solution

A bis-azamacrocyclic anthracene (L2), which has two a 12-membered cyclic tetraamine (cyclen) connected through a 9,10-dimethylanthracene spacer, has been synthesized as a new fluorescent chemosensor for detection of pH and metal cations in aqueous solution (cyclen = 1,4,7,10-tetraazacyclododecane, L2 = 9,10-bis(1,4,7,10-tetraazacyclododecane-1-ylmethyl)anthracene). The fluorescence response of L2 has been studied in comparison to that of the previously reported monoazamacrocyclic anthracene (L1 = 1-(9-anthrylmethyl)-1,4,7,10-tetraazacyclododecane). Plots of the fluorescence intensity of L2 against pH demonstrate a sigmoidal curve with pKa 7.4, which is lower than that of L1 (8.3). Potentiometric titration reveals that the increase in the L2 fluorescence requires protonation of both cyclen rings, thus resulting in the lower pKa value. L2 demonstrates impressive fluorescence response against metal cations. At basic pH, upon addition of Zn2+ or Cd2+, L1 leads to an increase in the fluorescence intensity with a 1:1 metal-intensity response. L2, however, shows a 2:1 response to Zn2+, while showing a 1:1 response to Cd2+. At neutral pH, L1 fluorescence decreases upon addition of Zn2+ or Cd2+ because of a formation of metal-anthracene pi complex. L2, however, still demonstrates a Zn2+-induced increase in intensity with a 2:1 response, while no change in intensity is observed upon Cd2+ addition. The obtained findings suggest potential utilities of L2 as a new type fluorescent chemosensor for the detection of cations in aqueous solution.     

A novel di-triazole based peptide as a highly sensitive and selective fluorescent chemosensor for Zn2+ ions

A di-triazole based peptide has been synthesised by copper catalyzed Huisgen cycloaddition. Fluorescence intensity is enhanced selectively in the presence of Zn(2+), which is ascribed to reversal of photoelectron transfer. Compound 7 was found to self-assemble in the presence of Zn(ClO(4))(2) in an exclusive 2:1 ratio, which is supported by (1)H NMR titration and mass spectral data. The fluorescence intensity of 7 shows a subsequent ON-OFF phenomenon upon repetitive and alternate addition of Zn(ClO(4))(2) and HClO(4).     

8-Hydroxyquinoline derivative as a fluorescent chemosensor for zinc ion.

8-Hydroxyquinoline derivative 1 as a fluorescent chemosensor for Zn2+ was synthesized. Because Cd2+ is often found with Zn2+ in the environment and can form fluorescent complexes with chelating fluorophores, a potentially important property of chemosensors for Zn2+ is their selectivity for Zn2+ over Cd2+. The Zn2+ or Cd2+ complexes of 1 gave an emission band from the 1:1 complex, but the fluorescence intensity for Cd2+ was a half of that for Zn2+. Ligand 1 is suited for use as a fluorescent chemosensor for Zn2+.