Microwave-assisted deformylation of N-aryl formamide by KF on basic Al2O3

The formyl group was successfully removed from N-aryl formamide by KF on a solid support of basic Al₂O₃ in 4-20 min with microwave irradiation. The conditions mimic base-catalyzed hydrolysis of formamide and are compatible with carbamates and t-butyl esters, but not methyl, ethyl, and benzyl esters.     

Single-Crystal Neutron Structure Analysis of (NH4)21[H3Mo57V6(NO)6O183(H2O)18]·53 H2O

The crystal structure of (NH₄)₂₁[H₃Mo₅₇V₆(NO)₆O₁₈₃ (H₂O)₁₈]·53 H₂O a supramolecular heteropoly cluster compound (space group P6₃/mmcZ=2 final R1=0.1302 (I>2σ(I)) for 1745 unique reflections) was redetermined by single-crystal neutron diffraction studies at 20 K. The X-ray diffraction results reported in 1994 by Müller et al. (Z. Anorg. Allg. Chem. 620 599) are confirmed. Additionally we could localize many hydrogen positions not found so far and establish a phase transition near 240 K. Many of the ammonium ions the ligand and hydrate H₂O molecules and the hydroxy group are orientationally disordered even at 20 K. The central cavity of the structure is built up by two twelve-membered rings consisting of six O-H·sdot;·O hydrogen bonds each. These strong hydrogen bonds are obviously decisive for the stability of the cluster. The hydrate H₂O molecules are stronger-hydrogen-bond acceptor groups than the oxoligands of the cluster.     

Synthesis, crystal structure, infrared and Raman spectra of Sr4Cu3(AsO4)2(AsO3OH)4·3H2O and Ba2Cu4(AsO4)2(AsO3OH)3

The two new compounds, Sr₄Cu₃(AsO₄)₂(AsO₃OH)₄·3H₂O (1) and Ba₂Cu₄(AsO₄)₂(AsO₃OH)₃(2), were synthesized under hydrothermal conditions. They represent previously unknown structure types and are the first compounds synthesized in the systems SrO/BaO-CuO-As₂O₅-H₂O. Their crystal structures were determined by single-crystal X-ray diffraction [space group C2/c, a=18.536(4) Å, b=5.179(1) Å, c=24.898(5) Å, β=93.67(3)°, V=2344.0(8) Å³, Z=4 for 1; space group P4₂/n, a=7.775(1) Å, c=13.698(3) Å, V=828.1(2) Å³, Z=2 for 2]. The crystal structure of 1 is related to a group of compounds formed by Cu²⁺-(XO₄)³⁻ layers (X=P⁵⁺, As⁵⁺) linked by M cations (M=alkali, alkaline earth, Pb²⁺, or Ag⁺) and partly by hydrogen bonds. In 1, worth mentioning is the very short hydrogen bond length, D···A=2.477(3) Å. It is one of the examples of extremely short hydrogen bonds, where the donor and acceptor are crystallographically different. Compound 2 represents a layered structure consisting of Cu₂O₈ centrosymmetric dimers crosslinked by As1φ₄ tetrahedra, where φ is O or OH, which are interconnected by Ba, As2 and hydrogen bonds to form a three-dimensional network. The layers are formed by Cu₂O₈ centrosymmetric dimers of CuO₅ edge-sharing polyhedra, crosslinked by As1O₄ tetrahedra. Vibrational spectra (FTIR and Raman) of both compounds are described. The spectroscopic manifestation of the very short hydrogen bond in 1, and ABC-like spectra in 2 were discussed.     

Solvothermal synthesis and characterisation of La1−xAxMnO3 nanoparticles

The synthesis of La_1−xA_xMnO₃ (A=Ca, Sr, Ba) nanoparticles in nonaqueous solvents has been studied. For this solvothermal procedure benzyl alcohol and acetophenone were chosen as reaction media. After this treatment in mild conditions a precipitate was obtained, which, however, can be annealed to the crystalline perovskite structure. Our results show that acetophenone is more suited to obtain the clean pervoskite phase than benzyl alcohol.     

A one-pot selective deprotective acetylation of benzyl ethers and OTBDMS ethers using the BF3·Et2O-NaI-Ac2O reagent system

An efficient selective deprotection followed by acetylation of several benzyl ethers, including 6-OBn ethers of monosaccharides, and -OTBDMS ethers has been developed by using the BF₃·Et₂O-NaI-Ac₂O reagent system. In addition, both benzylidene and isopropylidene groups are deprotected to form the corresponding diacetates.     

2D hydrogen bond networks in the crystals of [(NH4 · H2O)2][(RO)(Fc)P(S)2]2 (R = 3-(BzO)-Bz, 4-(n-Bu)-Bz, Bz = benzyl)

Herein we report on the preparation of hydrated ammonium salts of the dithiophosphonic acids (RO)(Fc)P(S)(SH) (R = derivative of benzyl) featuring [(NH₄ · H₂O)₂]²⁺ cations formed by N-H?O hydrogen bonds. Interaction of these cations with the PS₂⁻ units gives rise to unprecedented 2D networks, formed solely by hydrogen bonds. These unique networks containing two- and three centered hydrogen bonds are valuable examples of the acceptor properties of sulfur atoms.     

Structure cristalline de l'hexachlorotellurate(IV) d'hydroxydiméthylsoufrediméthylsulfoxyde (12) [(CH3)2SOH]2(TeCl6)· 2(CH3)2SO

[(CH₃)₂SOH]₂(TeCl₆)·2(CH₃)₂SO crystallizes in the triclinic system, space group P$\text{1}$, with a 9.474(5), b 7.952(4), c 10.180(3) Å, α 109.20(3)°, β 95.75(5)° and γ 117.60(4)°, Z = 1. The structure has been determined by a single-crystal X-ray study and refined by full-matrix least squares analysis to R = 0.044 for 1332 independent reflections. The hydrogen atoms of the methyl groups were not located. The structure contains TeCl₆^2? and (CH₃)₂SOH⁺ ions and (CH₃)₂SO molecules which form layers situated along (011) planes. The TeCl₆^2? ion adopts an almost regular octahedron. The (CH₃)₂SOH⁺ cation and the (CH₃)₂SO molecule are linked by a short hydrogen bond. Interatomic distances are in good agreement with previously published values. Cohesion of the structure is due to ionic interactions, hydrogen bonds and Van der Waals interactions.     

N-benzyl-N-[(E)-2-phenylethenyl]trifluoromethanesulfonamide

In the search for an approach to N-vinyltriflamides with a free NH group TfNHCH=CHR (Tf = CF₃SO₂) N-(benzyl)-N-(2-bromo-2-phenylethenyl)triflamide TfN(Bn)CH=CHPh was synthesized through bromination-dehydrobromination of N-(benzyl)-N-(2-phenylethyl)triflamide. At removing the benzyl protecttion by the action of trifluoromethanesulfonic acid benzyl alcohol separated; however instead of the target N-styryltriflamide unexpectedly the product of its hydrogenation was obtained, N-(2-phenylethyl)triflamide. Obviously, the benzyl alcohol was the hydrogen donor, and the easy hydrogenation was facilitated by the high electrophilicity of the double bond in N-styryltriflamide because of strong electron-acceptor effect of the triflyl group.     

Reductive esterification of aromatic aldehydes using Zn/Ac2O/imidazole or Zn/Yb(OTf)3/(RCO)2O system

Benzaldehydes are reduced by metallic zinc in the presence of Ac₂O and imidazole, giving the corresponding benzyl acetates in good yields. Reductive esterification of aromatic aldehydes is also carried out via gem-diacetoxy compounds. Carbonyl compounds are readily converted to the gem-diacyloxy compounds in excellent yields on treatment with 2 molar amounts of acid anhydride and 10 mol% of Yb(OTf)₃ in MeCN at room temperature. Thus-formed diacyloxy compounds derived from aromatic aldehydes are reduced in situ by metallic zinc to afford the corresponding esters.     

Environmentally benign electrophilic and radical bromination ‘on water’: H2O2-HBr system versus N-bromosuccinimide

A H₂O₂-HBr system and N-bromosuccinimide in an aqueous medium were used as a ‘green’ approach to electrophilic and radical bromination. Several activated and less activated aromatic molecules, phenylsubstituted ketones and styrene were efficiently brominated ‘on water’ using both systems at ambient temperature and without an added metal or acid catalyst, whereas various non-activated toluenes were functionalized at the benzyl position in the presence of visible light as a radical activator. A comparison of reactivity and selectivity of both brominating systems reveals the H₂O₂-HBr system to be more reactive than NBS for benzyl bromination and for the bromination of ketones, while for electrophilic aromatic substitution of methoxy-substituted tetralone it was higher for NBS. Also, higher yields of brominated aromatics were observed when using H₂O₂-HBr ‘on water’. Bromination of styrene reveals that not just the structure of the brominating reagent but the reaction conditions: amount of water, organic solvent, stirring rate and interface structure, play a key role in defining the outcome of bromination (dibromination vs bromohydroxylation). In addition, mild reaction conditions, a straightforward isolation procedure, inexpensive reagents and a lower environment impact make aqueous brominating methods a possible alternative to other reported brominating protocols.     

Two tantalum fluorides templated with tren: [H4tren](TaF7)2·H2O and [H4tren](TaF7)2

Using tris(2-aminoethyl)amine [(C₂H₄NH₂)₃N] (tren) as a template, two new tantalum fluorides are obtained by slow evaporation of solutions: [H₄tren](TaF₇)₂·H₂O (I) and [H₄tren](TaF₇)₂ (II). The structure determinations are performed by single crystal X-ray technique. Structures of I and II are built up from isolated TaF₇ distorted monocapped trigonal prisms or pentagonal bipyramids; charge balance is achieved by tetraprotonated [H₄tren]⁴⁺ cations which possess a “scorpion” configuration. In I and II, TaF₇ polyhedra, connected by hydrogen bonds with water molecules in I, lie in corrugated layers; hydrogen bond networks ensure the cohesion between these layers and [H₄tren]⁴⁺cations.     

The stereochemistry of Tutton's salts X2[M(H2O)6](YO4)2

Neutron structure determinations have been made of Tutton's salts, X₂[M(H₂O)₆] (YO₄)₂, where Y = Se, X = K⁺, M = Cu²⁺; Y = S, X = K⁺, M = Ni²⁺, Cu²⁺, Zn²⁺; X = Rb⁺, Cs⁺, M = Cu²⁺. This work has shown that there are extensive hydrogen networks with almost linear hydrogen bonds from [M(H₂O)₆]²⁺ to (YO₄)^2?. The (H … O) distance increases in the Cu²⁺ series for X = K⁺ to Cs⁺ but there is no difference for the potassium copper salts when Y = Se or S. Three different distorted [M(H₂O)₆]²⁺ octahedra were found in the series (orthorhombic, tetragonal with two long and four short, or four long and two short bonds). The interatomic distances from X⁺ to the neighboring O in a distorted XO₈⁺ dodecahedron increases with increased cation size, implying that the X⁺ polyhedron is maintaining its shape.     

Low-temperature single crystal X-ray diffraction and high-pressure Raman studies on [(CH3)2NH2]2[SbCl5]

The structure of bis(dimethylammonium) pentachloroantimonate(III), [(CH₃)₂NH₂]₂[SbCl₅], BDP, was studied at 15 K and ambient pressure by single-crystal X-ray diffraction as well as at ambient temperature and high pressures up to 4.87(5) GPa by Raman spectroscopy. BDP crystallizes in the orthorhombic Pnma space group with a=8.4069(4), b=11.7973(7), c=14.8496(7) Å, and Z=4; R₁=0.0381, wR₂=0.0764. The structure consists of distorted [SbCl₆]³⁻ octahedra forming zig-zag [{SbCl₅}_n]²ⁿ⁻ chains that are cross-linked by dimethylammonium [(CH₃)₂NH₂]⁺ cations. The organic and inorganic substructures are bound together by the N-H…Cl hydrogen bonds. The distortions of [SbCl₆]³⁻ units increase, partly due to the influence of the hydrogen bonds which became stronger, with decreasing temperature. The preliminary room temperature, high-pressure X-ray diffraction experiments suggest that BDP undergoes a first-order phase transition below ca. 0.44(5) GPa that destroys single-crystal samples. The transition is accompanied by changes in the intensities and positions of the Raman lines below 400 cm⁻¹.     

Evidence for enhanced reactivity in the photofragmentation of the bridged dinuclear system Me2Si[η5-C5H4Fe(CO)2(η1-CH2C6H5)]2

Experimental evidence that the dinuclear complex Me₂Si[η⁵-C₅H₄Fe(CO)₂-(η¹-CH₂C₆H₅)]₂ shows enhanced reactivity over its mononuclear analogy η⁵-C₅H₅Fe(CO)₂(η¹-CH₂C₆H₅ in photogragmentation to produce bibenzyl and FeFe bonded product is presented. Information from a series of competition and crossover experiments indicate that two factors are involved in the enhancement: (1) the ability to photochemically produce a 16-electron unsaturated benzyl unit in close proximity to a saturated partner, and (2) the inability of the FeFe bonded species 4 to quench free benzyl radicals in solution. Chemical reaction of Me₂Si[η⁵-C₅H₄Fe(CO)₂(η¹-CH₂C₆H₅)]₂ with Me₃NO produces bibenzyl and establishes that loss of CO is the initial step in the fragmentation reaction. In addition, trapping experiments with 9,10-dihydroanthracene show that bibenzyl is formed from free benzyl radical; BBased on these results an overall mechanism is proposed.     

SmI2/H2O/amine promoted reductive cleavage of benzyl-heteroatom bonds: optimization and mechanism

The SmI₂/H₂O/pyrrolidine mediated cleavage of benzylic alcohols and benzyl groups was studied and found to be a viable alternative to the Birch reduction yielding the corresponding deoxygenated product in excellent yield. The reaction has been investigated by kinetic methods, and a mechanism involving a pre-complexation of the alcohol to SmI₂ followed by an amine mediated electron transfer and subsequent bond cleavage and transfer of a second electron and proton to yield the toluene product has been proposed. The reaction is strongly inhibited at higher concentrations of water, indicating that it proceeds via an inner-sphere electron transfer from samarium(II) to the benzyl group, and excess of water prevents coordination of benzyl alcohol to samarium.     

硫酸亚铈催化的芳香化合物与苄基醇、烯丙醇类化合物以及苄基氯的傅-克烷基化反应研究

硫酸亚铈作为一种便宜的和有效的催化剂催化芳香化合物与苄基醇、烯丙醇类化合物和苄基氯的傅-克烷基化反应. 在1～10 mol%的硫酸亚铈存在下, 芳香化合物分别与苄基醇、烯丙醇类化合物和苄基氯能够顺利有效地进行傅-克烷基化反应. 此外, 催化剂能回收, 再次使用三次也没有明显地失去催化活性.     

Crystal structure and vibrational spectra of tetrasodium dimagnesium dihydrogen diphosphate octahydrate Na4Mg2(H2P2O7)4·8H2O

A tetrasodium dimagnesium dihydrogen diphosphate octahydrate Na₄Mg₂(H₂P₂O₇)₄·8H₂O was synthesized. It crystallizes in the monoclinic system, space group P2₁/m (no. 11), Z=4, and its unit-cell parameters are: a=8.0445(3) Å, b=11.5244(5) Å, c=9.0825(4) Å, β=113.1401(2)°, V=774.28(6) Å³. The structure was determined by single-crystal X-ray diffractometry and refined to a R index of 0.0294 (wR=0.0727) for 1878 independent reflections with I>2σ(I). The framework is made by the alternance of layers of MgO₆/NaO₆ octahedra and double tetrahedra PO₄ along b-axis. Such layers are characterized by the presence of strong hydrogen bonds. (H₂P₂O₇)²⁻ anions exhibit bent eclipsed conformation. Besides, the crystal was analyzed by FT-IR and micro-Raman vibrational spectroscopy. No coincidences of the majority of the Raman and infrared spectra bands of Na₄Mg₂(H₂P₂O₇)₄·8H₂O confirms a centrosymmetric structure of this material. The vibrational spectra confirm the bent POP configuration in this compound.     

H2S sensing properties of nanocrystalline Sr2FeO.6NiO.4MoO6 thick film prepared by sol-gel citrate method

Nanocrystalline Sr₂FeMoO₆ (SFMO) belonging to the group of double perovskite oxides, was prepared by the sol-gel citrate method. The structural and microstructural characterization has been carried out with the help of X-ray diffraction (XRD) and transmission electron microscopy (TEM), respectively. XRD of Sr₂Fe_1−xNi_xMoO₆ (SFNMO) shows the formation of solid solution with average grain size of about 40 nm. A comparative study of gas sensing behaviour of Sr₂FeMoO₆ and Sr₂Fe_1−xNi_xMoO₆ with reducing gases like hydrogen sulfide (H₂S), liquid petroleum gas (LPG), hydrogen (H₂), ethanol (C₂H₅OH) and carbon monoxide (CO) were also discussed. The sensitivity is calculated by measuring the change the resistance of the sensor material in the presence of gas. Among the different composition of x (x = 0.2, 0.3, 0.4, 0.5), Sr₂Fe_0.6Ni_0.4MoO₆ (x = 0.4) shows better response to H₂S gas at 260 °C. Incorporation of palladium (Pd) improves the gas response, selectivity, response time and reduced the operating temperature from 260 to 220 °C for H₂S gas.