Mesitylene based azo-coupled chromogenic tripodal receptors—a visual detection of Ag(I) in aqueous medium

A series of novel tripodal ligands 3a-d, based on a mesitylene anchor, containing aza-thioethers as donor atoms and coupled with 4-(4/3/2-nitrophenyl)azophenol or 4-(2-chlorophenyl)azophenol have been synthesized as chromogenic receptors, which are highly selective for silver(I). The complexation behavior of 3a-d with various metal ions has been evaluated by UV-vis spectrometry in dioxane/water (1:9/v:v) solution at 25 °C. The UV-vis spectra show that the complexation of 3a-c with Ag⁺ have pronounced bathochromic shifts accompanied by a unique color change in the solution from yellow to red, which is visible with the naked eye. The ligands do not show any significant change on addition of other metal ions like Li⁺, Na⁺, K⁺, Sr²⁺, Ca²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Pb²⁺, Ni²⁺, and Cu²⁺ and thus are highly specific and selective for Ag⁺ in the aqueous medium.     

Spectroscopic,structure and DFT studies of copper(II) and palladium(II) complexes of pyridine-2-carboxaldehyde-2-pyridylhydrazone: A chromogenic agent for palladium(II)

A heterocyclic hydrazone ligand, pyridine-2-carboxaldehyde-2-pyridylhydrazone, HL, 1, was investigated as a new chromogenic agent for selective detection of Pd²⁺. The ligand HL, 1, undergoes 1:1 complexation with Pd²⁺ and Cu²⁺ to form complexes [Pd(L)Cl], 1a and [Cu(HL)Cl₂], 1b respectively. The complex 1a gives a characteristic absorption peak at 536 nm with distinct reddish-pink coloration. The change in color can easily be distinguished from other metal complexes by the naked eye. No obvious interference was observed in the presence of other metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺, Al³⁺, Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Sn²⁺, Hg²⁺, Pb²⁺). The association constants, K_ass (UV–Vis), were found to be 5.52 ± 0.004 × 10⁴ for 1a and 4.94 ± 0.006 × 10⁴ for 1b at 298 K. On excitation at 295 nm, the ligand HL, 1 strongly emits at 372 nm due to an intraligand ¹(π–π^∗) transition. Upon complexation the emission peaks are blue shifted (λ_ex 295 nm, λ_em 358 nm for 1a and λ_ex 295 nm, λ_em 367 nm for 1b) along with a quenching (F/F₀ 0.32 for 1a and 0.88 for 1b) in the emission intensity. DFT and TDDFT calculations were highly consistent with the spectroscopic behavior of the ligand and complexes. The molecular structure of the complex 1b has been determined by single crystal X-ray diffraction studies.     

Three different fluorescent responses to transition metal ions using receptors based on 1,2-bis- and 1,2,4,5-tetrakis-(8-hydroxyquinolinoxymethyl)benzene

The dipod 1,2-bis(8-hydroxyquinolinoxymethyl)benzene (3) and tetrapod 1,2,4,5-tetrakis(8-hydroxyquinolinoxymethyl)benzene (5) have been synthesized through nucleophilic substitution of respective 1,2-bis(bromomethyl)benzene (2) and 1,2,4,5-tetra(bromomethyl)benzene (4) with 8-hydroxyquinoline (1). For comparison, 1,3,5-tris(8-hydroxyquinolinoxymethyl)benzene derivatives (7a and 7b) have been obtained. The complexation behavior of these podands towards Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ metal ions has been investigated in acetonitrile by fluorescence spectroscopy. The sterically crowded 1,2,4,5-tetrapod 5 displays unique fluorescence ‘ON-OFF-ON’ switching through fluorescence quenching (λ_max 395 nm, switch OFF) with <1.0 equiv of Ag⁺ and fluorescence enhancement (λ_max 495 nm, switch ON) with >3 equiv Ag⁺ and can be used for estimation of two different concentrations of Ag⁺ at two different wavelengths. The addition of Cu²⁺, Ni²⁺, and Co²⁺ metal ions to tetrapod 5 causes fluorescence quenching, i.e., ‘ON-OFF’ phenomena at λ_max 395 nm for <10 μM (1 equiv) of these ions but addition of Zn²⁺ and Cd²⁺ to tetrapod 5 results in fluorescence enhancement with a gradual shift of λ_em from 395 to 432 and 418 nm, respectively. Similarly, dipod 3 behaves as an ‘ON-OFF-ON’ switch with Ag⁺, an ‘ON-OFF’ switch with Cu²⁺, and an ‘OFF-ON’ switch with Zn²⁺. The placement of quinolinoxymethyl groups at the 1,3,5-positions of benzene ring in tripod 7a-b leads to simultaneous fluorescence quenching at λ_max 380 nm and enhancement at λ_max 490 nm with both Ag⁺ and Cu²⁺. This behavior is in parallel with 8-methoxyquinoline 8. The rationalization of these results in terms of metal ion coordination and protonation of podands shows that 1,2 placement of quinoline units in tetrapod 5 and dipod 3 causes three different fluorescent responses, i.e., ‘ON-OFF-ON’, ‘ON-OFF’, and ‘OFF-ON’ due to metal ion coordination of different transition metal ions and 1, 3, and 5 placement of three quinolines in tripod 7, the protonation of quinolines is preferred over metal ion coordination. In general, the greater number of quinoline units coordinated per metal ion in 5 compared with the other podands points to organization of the four quinoline moieties around metal ions in the case of 5.     

A rigid conjugated pyridinylthiazole derivative and its nanoparticles for divalent copper fluorescent sensing in aqueous media

A rigid conjugated pyridinylthiazole derivative (1) and two bithiazole derivatives with similar structures (2, 3) were synthesized and characterized. Their optical properties were investigated through spectral analysis. By applying the three compounds to Cu²⁺ ions detection, it was shown that compound 1 could be employed as a selective and sensitive Cu²⁺ ions fluorescent chemosensor. For aqueous assay, the nanoparticles of compound 1 were prepared in aqueous media. Compared to the monomer, 1 nanoparticles were more fluorescence sensitive to Cu²⁺ ions. Its binding mode with Cu²⁺ ions was correlated well with Langmuir equation. Compound 1 nanoparticles exhibit a dynamic working range for Cu²⁺ ions from 0.02 to 0.50 μM with a detection limit of 10 nM. The proposed chemosensor has been used for the direct measurement of Cu²⁺ content in drinking water samples with satisfying results.     

Fluorogenic dual click derived bis-glycoconjugated triazolocoumarins for selective recognition of Cu(II) ion

Carbohydrate based fluorescent sensors S1 and S2 have been developed by fluorogenic dual click chemistry and are characterized by various spectroscopic techniques. Both the fluorescent probes displayed highly selective detection of Cu²⁺ ions by means of fluorescence quenching. The job plot experiment suggested 1:1 complexation of probes S1 and S2 with Cu²⁺ ions having detection limit of 6.99 μM and 7.30 μM, respectively. The binding constants for S1-Cu²⁺ and S2-Cu²⁺ complexation were evaluated to be 3.34 × 10³ M⁻¹ and 5.93 × 10³ M⁻¹, respectively.     

Fluorescence sensing of Cu within a pseudo 18-crown-6 cavity

We report herein a pseudo-crown based fluorescent receptor (1) for the selective detection of Cu²⁺ cation. Receptor 1 can detect Cu²⁺ even in 5 μM level in acetonitrile-water (9:1 v/v). Compound 1 is very effective for the detection of Cu²⁺ amongst the series of metal ions studied (Li⁺, Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Pb²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Mn²⁺).     

Selective turn-on fluorescence for Zn and Zn + Cd metal ions by single Schiff base chemosensor

Chemosensor based on Schiff base molecules (1, 2) were synthesized and demonstrated the selective fluoro/colorimetric sensing of multiple metal ions (Mn²⁺, Zn²⁺ and Cd²⁺) in acetonitrile–aqueous solution. Both 1 and 2 showed a highly selective naked-eye detectable colorimetric change for Mn²⁺ ions at 10⁻⁷ M. Fluorescence sensing studies of 1 and 2 exhibited a strong fluorescence enhancement (36 fold) selectively upon addition of Zn²⁺ (10⁻⁷ M, λ_max = 488 nm). Fluorescence titration and single crystal X-ray analysis confirmed the formation of 1:1 molecular coordination complex between 1 and Zn²⁺. Interestingly, a rare phenomenon of strong second turn-on fluorescence (190 fold, λ_max = 466 nm) was observed by the addition of Cd²⁺ (10⁻⁷ M) into 1 + Zn²⁺ or Zn²⁺ (10⁻⁷ M) into 1 + Cd²⁺. Importantly both 1 and 2 exhibited different fluorescence λ_max with clearly distinguishable color for both Zn²⁺ and Cd²⁺.     

Heavy analogues of the 6π-electron anionic ring systems: Cyclopentadienide ion and cyclobutadiene dianion

The heavy analogues of the anionic 6π-electron systems, lithium 1,2-disila-3-germacyclopentadienide 2⁻ · [Li⁺(thf)], 1,2-disila-3,4-digerma- and 1,2,3,4-tetrasilacyclobutadiene dianions 7²⁻ · 2[K⁺(thf)₂] and 8²⁻ · 2[K⁺(thf)₂], were synthesized by the reduction of the neutral precursors 1, 3 and 4, respectively. 2⁻ · [Li⁺(thf)], the heavy analogue of the cyclopentadienide ion, is an aromatic compound, whereas 7²⁻ · 2[K⁺(thf)₂] and 8²⁻ · 2[K⁺(thf)₂], the heavy analogues of the cyclobutadiene dianion, are both non-aromatic.     

Exploiting the deprotonation mechanism for the design of ratiometric and colorimetric Zn fluorescent chemosensor with a large red-shift in emission

The design, synthesis, and photophysical evaluation of a new naphthalimide-based fluorescent chemosensor, N-butyl-4-[di-(2-picolyl)amino]-5-(2-picolyl)amino-1,8-naphthalimide (1), were described for the detection of Zn²⁺ in aqueous acetonitrile solution at pH 7.0. Probe 1 showed absorption at 451 nm and a strong fluorescence emission at 537 nm (Φ_F=0.33). The capture of Zn²⁺ by the receptor resulted in the deprotonation of the secondary amine conjugated to 1,8-naphthalimide so that the electron-donating ability of the N atom would be greatly enhanced; thus probe 1 showed a 56 nm red-shift in absorption (507 nm) and fluorescence spectra (593 nm, Φ_F=0.14), respectively, from which one could sense Zn²⁺ ratiometrically and colorimetrically. The deprotonated complex, [(1-H)/Zn]⁺, was calculated at m/z 619.1800 and measured at m/z 618.9890. In contrast to these results, the emission of 1 was thoroughly quenched by Cu²⁺, Co²⁺, and Ni²⁺. The addition of other metal ions such as Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Fe³⁺, Mn²⁺, Al³⁺, Cd²⁺, Hg²⁺, Ag⁺, and Pb²⁺ produced a nominal change in the optical properties of 1 due to their low affinity to probe 1. This means that probe 1 has a very high fluorescent imaging selectivity to Zn²⁺ among metal ions.     

Ratiometric fluorescent and colorimetric sensors for Cu based on 4,5-disubstituted-1,8-naphthalimide and sensing cyanide via Cu displacement approach

Two 4,5-disubstituted-1,8-naphthalimide derivatives 1 and 2 were synthesized as ratiometric fluorescent and colorimetric sensors for Cu²⁺, respectively. In 100% aqueous solutions of 1, the presence of Cu²⁺ induces a strong and increasing fluorescent emission centered at 478 nm at the expense of the fluorescent emission of 1 centered at 534 nm. Compound 2 senses Cu²⁺ by means of a colorimetric (primrose yellow to pink) method with a thorough quench in emission attributed to the deprotonation of the secondary amine conjugated to the naphthalimide fluorophore. 1-Cu²⁺ and 2-Cu²⁺ sense cyanide in ratiometric way via colorimetric and fluorescent changes.     

Photoactive chemosensors 4: a Cu protein cavity mimicking fluorescent chemosensor for selective Cu recognition

Fluorescent chemosensor 3 can sense Cu²⁺ ions (1-8 μM) even in the presence of elevated levels of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Ag⁺ and Pb²⁺ (5000 μM). 3 can also analyze for Ag⁺ ions (50-500 μM) in the presence of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺ and Pb²⁺ (5000 μM) but Cu²⁺ strongly interferes.     

Heavy metal complexation by N-acyl(thio)urea-functionalized cavitands: synthesis, extraction and potentiometric studies

The synthesis and binding properties of resorcinarene-based cavitands functionalized with N-acylthiourea moieties towards different cations are described. Extraction studies with metal (Pb²⁺, Cu²⁺, Ag⁺, Hg²⁺, Cd²⁺, Eu³⁺, Fe³⁺, K⁺, Na⁺, and Ca²⁺) picrates and the incorporation in ion selective electrodes (ISEs), show that there is more than a 40% increase of the Ag⁺ extraction for N-acylthiourea ionophores (2, 3, and 8) in comparison with N-benzoyl-N′-benzylthiourea (9). Ionophore 8, which has a C₃ chain between the platform and the ionophore, extracts two times more Cu²⁺ than the more rigid one (2). Stoichiometry studies showed for ligand 2 a ligand/metal ratio of 1:1, while for model compound 9 a ratio of 1:2 was found. Potentiometric studies of electrodes revealed that cavitands 2, 3, and 8 induce a significantly different selectivity pattern compared to the cation-exchanger used, as well as model compound 9. Especially, a considerable enhancement of the selectivity towards Ag⁺ and Pb²⁺ over K⁺, Ca²⁺, and Na²⁺ ions was observed.     

Weak ferromagnetism in 1D coordination polymers: Syntheses,crystal structures,spectroscopic and magnetic properties of [Cu(L)(Memal)]n (Memal = the dianion of methylmalonic acid,L = 1,10-phenanthroline, 2,2′-bipyridine)

Investigation of the CuCl₂/H₂Memal/L (H₂Memal = methylmalonic acid, L = 1,10-phenanthroline or 2,2′-bipyridine) reaction system in MeOH and various molar ratios has lead to the isolation of two one-dimensional coordination polymers presenting the [Cu(L)(Memal)] repeating unit (1, L = 1,10-phen; 2, L = 2,2′-bpy). The Memal²⁻ ligand adopts the bidentate [chelating] + unidentate coordination mode between the Cu^II ions. Magnetic susceptibility measurements on 1 and 2 indicated the existence of weak ferromagnetic intrachain interactions and X-band EPR spectra from powdered samples of 1 and 2 are consistent with the stereochemistry of the Cu^II ions and with the presence of weak exchange interactions.     

Magnetic coupling in EE and EO azido-bridged binuclear copper complexes: Synthesis,structure and magnetic studies

Four azide bridged dinuclear copper(II) complexes, [Cu₂(L^X)₂(N₃)₂](ClO₄)₂, with L^X = substituted N,N-bis[(3,5-dimethylpyrazole-1-yl)-methyl]benzylamine, [X = H (1), OMe (2), Me (3) and Cl (4)] have been synthesized, out of which complexes 1 and 2 have been characterized structurally. In Complex 1 the two bridging azide ligands have connected the two metal centers in an end-on (EO) fashion with aSP (asymmetric Square Pyramidal) geometry and showed an weak antiferromagnetic interaction (J = −3.34 cm⁻¹). On the contrary, in complex 2, the two metal centers have been connected in end-to-end (EE) fashion exhibiting moderately strong ferromagnetic interaction (J = +19.7 cm⁻¹). Cyclic voltammetric studies performed on all the four complexes show a reasonably good correlations when E_1/2 for Cu^IICu^II → Cu^IICu^III and Cu^IICu^III → Cu^IIICu^III oxidations are plotted against σ (substituent constants) with ρ = −0.182 (R² = 0.92) and −0.684 (R² = 0.99) respectively.     

Synthesis and DNA cleavage properties of ternary Cu(II) complexes containing histamine and amino acids

The ternary complexes of [Cu^II(Hist)(Tyr)]⁺1 and [Cu^II(Hist)(Trp)]⁺2 have been synthesized, structurally characterized and their DNA binding and cleavage abilities probed. The intrinsic binding constants (K_b) for complexes/CT-DNA were also determined (K_b = 2.7 × 10² for complex 1 and K_b = 2.2 × 10² for complex 2). These complexes exhibit their nuclease activity on plasmid DNA, which seems to depend on the nature of the aromatic moiety. The DNA hydrolytic cleavage rate constants were also determined for complexes 1 and 2, which are 0.91 and 0.79 h⁻¹, respectively.     

A dual detecting polymeric sensor: chromogenic naked eye detection of silver and ratiometric fluorescent detection of manganese

Polymer 1, a poly(olefin) with pendant Schiff base units is prepared by reacting poly(allylamine) and 2-hydroxynapthaldehyde in methanol. The optical properties of 1 are investigated in THF:H₂O (9:1) solvent system buffered at pH 7.0 ± 0.1 using HEPES. When tested against a range of physiological and environmentally relevant cations 1 displays selectivity for Ag⁺ from changes in the UV-vis spectra with linearity established in the range of 10-60 μM. The addition of Ag⁺ to a solution of 1 also causes a colour change from colourless to dark yellow meaning Ag⁺ is also detectable by the naked eye. In contrast, selectivity is observed for Mn²⁺ from changes in the emission spectra again with good linearity observed in the range of 0-50 nM. This is the first reported polymeric sensor capable of detecting both Ag⁺ and Mn²⁺ using two different detection modes.     

FRET-derived ratiometric fluorescence sensor for Cu

New N-(pyrenylmethyl)naphtho-azacrown-5 (1) was synthesized as an ‘On-Off’ fluorescent chemosensor for Cu²⁺. Excited at 240 nm corresponding to the absorption of naphthalene unit (energy donor) of 1, emission at 380 nm from pyrene unit (energy acceptor) is observed, indicating that intramolecular fluorescence resonance energy transfer (FRET-On) occurs in 1. When Cu²⁺ is added to a solution of 1, however, the fluorescence of pyrene is strongly quenched (FRET-Off) whereas that of naphthalene group is revived. Such FRET ‘On-Off’ behavior of 1 is observed only in the case of Cu²⁺ binding, but not for other metal cations. The high selectivity of 1 toward Cu²⁺ can be potentially applied to a new kind of FRET-based chemosensor. The FRET On-Off behavior is supported by computational studies. The calculated molecular orbitals of HOMO and LUMOs suggest the excited-state interactions leading to FRET from naphthalene to pyrene in 1, but no electron density changes in 1·Cu²⁺ complex.     

Regulation of metal ion recognition by allosteric effects in thiacalix[4]crown based receptors

Three new ditopic receptors 3a-c based on thiacalix[4]arene of 1,3 alternate conformation possessing two different complexation sites have been designed and synthesized for both soft and hard metal ions. The imino nitrogens bind soft metal ion (Ag⁺/Pb²⁺/Cu²⁺) and the crown moiety binds K⁺ ion. The preliminary investigations show that 3a-c behave as ditopic receptors for Ag⁺/K⁺, Pb²⁺/K⁺, and Cu²⁺/K⁺ ions, respectively. In all the three receptors it was observed that the formation of 3a·Ag⁺/3b·Pb²⁺/3c·Cu²⁺ complex triggers the decomplexation of K⁺ ion from crown moiety and acts as a gateway, which regulates the binding of alkali metal to crown moiety. Thus, allosteric binding between metal ions ‘switch off’ the recognition ability of crown ether ring.     

Synthesis of a sugar-aza-crown ether-based cavitand as a selective fluorescent chemosensor for Cu ion

A chemosensor based upon the sugar-aza-crown ether 7 with one anthracenetriazolymethyl moiety was prepared and its fluoroionophoric properties toward transition metal ions were investigated. Chemosensor 7 exhibits highly selective recognition toward Cu²⁺ ion among a series of tested metal ions in MeOH solution. The association constant for 7∗Cu²⁺ in MeOH solution was calculated to be 2.5 × 10⁴ M⁻¹.     

A “sodium trap” based on benzo-15-crown-5 with an exocyclic N-(thiophosphoryl)thiourea moiety

For N-(thio)phosphorylthioureas of the common formula RC(S)NHP(X)(OiPr)₂HL^I (R = N-(4′-aminobenzo-15-crown-5), X = S), HL^II (R = N-(4′-aminobenzo-15-crown-5), X = O), HL^III (R = PhNH, X = S), HL^IV (R = PhNH, X = O), and (N,N′-bis-[C(S)NHP(S)(OiPr)₂]₂-1,10-diaza-18-crown-6) H₂L^V, salts LiL^I,III,IV, NaL^I–IV, KL^I–IVM₂L^V (M = Li⁺, Na⁺, K⁺), Ba(L^I,III,IV)₂, and BaL^V have been synthesized and investigated. Compounds NaL^I,II quantitatively drop out as a deposit in ethanol medium, allowing the separation of Na⁺ and K⁺ cations. This effect is not displayed for the other compounds. The crystal structures of HL^III and the solvate of the composition [K(Me₂CO)L^III] have been investigated by X-ray crystallography.