Helicity of N,N′-diaryl-trans-1,2-diaminocyclohexane derivatives. Implications for molecular helicity manipulations

Derivatives of trans-1,2-diaminocyclohexane (DACH), useful as chiral ligands, scaffolds and building blocks, differ in their conformation. The conformation of N,N′-diaryl-DACH derivatives was studied by the semiempirical and DFT computational methods and by exciton-coupled circular dichroism. It was found that, contrary to M-helical N,N′-diimine, N,N′-diimide and N,N′-diamide derivatives, the aromatic residues in N,N′-diphenyl derivatives are oriented to form a P-helix for the (R,R)-DACH absolute configuration. The helicity of the bis-aryl system is modified in the case of 1-naphthyl or 2-naphthyl derivatives. Further switching of helicity has been demonstrated by either protonation or mono-N-acetylation of N,N′-diaryl DACH derivatives.     

Copper(I) catalysis: Synthesis of N,N′-diarylated and N-aryl,N′-formylated chiral C2-symmetric diamines

Chiral N,N′-diaryl C₂-symmetric diamines and N-aryl,N′-formyl-trans-(1R,2R)-diaminocyclohexane are readily accessed by copper catalyzed N,N′-diarylation and N-aryl,N′-formylation of trans-(1R,2R)-diaminocyclohexane with aryl bromides. N,N′-diarylation using (R)-1,1′-binaphthyl-2,2′-diamine and iodobenzene gave the corresponding (R)-N,N′-diphenyl-1,1′-binaphthyl-2,2′-diamine derivative in 83% yield.     

An efficient, mild, and selective Ullmann-type N-arylation of indoles catalyzed by copper(I) complex

A wide range of N-arylated indoles are selectively synthesized through intermolecular C(aryl)-N bond formation from the corresponding aryl iodides and indoles through Ullmann-type coupling reactions in the presence of a catalytic amount of easily available N,N,N′,N′-tetramethyl-BINAM-CuI complex under very mild reaction conditions.     

The application of N,N′-dibromo-N,N′-1,2-ethanediylbis-(p-toluenesulphonamide) as a powerful reagent for the oxidation of primary and secondary alcohols to aldehydes and ketones

Aliphatic and benzylic alcohols are readily oxidized to aldehydes and ketones in good yields under mild conditions by N,N′-dibromo-N,N′-1,2-ethanediylbis(p-toluenesulphonamide) [BNBTS].     

Synthesis of B-trisubstituted borazines via the rhodium-catalyzed hydroboration of alkenes with N,N′,N″-trimethyl or N,N′,N″-triethylborazine

Hydroboration of terminal and internal alkenes with N,N′,N″-trimethyl- and N,N′,N″-triethylborazine was carried out at 50 °C in the presence of a rhodium(I) catalyst. Addition of dppb or DPEphos (1 equiv.) to RhH(CO)(PPh₃)₃ gave the best catalyst for hydroboration of ethylene at 50 °C, resulting in a quantitative yield of B,B′,B″-triethyl-N,N′,N″-trimethylborazine. On the other hand, a complex prepared from (t-Bu)₃P (4 equiv.) and [Rh(coe)₂Cl]₂ gave the best yield for hydroboration of terminal or internal alkenes.     

Synthesis of 4-N-alkyl and ribose-modified AICAR analogues on solid support

Herein, we report the solid-phase synthesis of several 5-aminoimidazole-4-(N-alkyl)carboxamide-1-ribosides (4-N-alkyl AICARs) and the corresponding 2′,3′-secoriboside derivatives. The method uses the N-1-dinitrophenyl-inosine 5′-bonded to a solid support. This inosine derivative has the C-2 of the purine base strongly activated towards the attack of N-nucleophiles thus allowing the preparation of several N-1 alkylated inosine supports from which a small library of 4-N-alkyl AICAR derivatives has been synthesized. A set of new 4-N-alkyl AICA-2′,3′-secoriboside derivatives have also been obtained in high yields by solid-phase cleavage of the 2′,3′-ribose bond.     

Acyclic tertiary diamines and 1,4,7,10-tetraazacyclododecane with fluorine-containing β-diketones: Leading to low melting ionic adducts

N,N,N′,N′-Tetramethylmethanediamine (1a), N,N,N′,N′-tetramethylethanediamine (1b), N,N,N′,N′-tetramethyl-1,3-propanediamine (1c), and N,N,N′,N′-tetramethyl-1,6-hexanediamine (1d) were reacted at 25 °C with 1,1,1,5,5,5-hexafluoro-2,4-pentanedione (2a), 2,2-dimethyl-6,6,7,7,8,8,8-heptafluoro-3,5-octanedione (2b), 2-thenoyltrifluoroacetone (2c), and 4,4,4-trifluoro-1-(2-furyl)-1,3-butanedione (2d) to form the ionic adducts 3-18. 1,4,7,10-Tetraazacyclododecane (1e) reacted at 25 °C with β-diketones (2a-d) and 1,1,1-trifluoro-2,4-pentanedione (2e) to give ionic solids 19-23 in good yields. Some of the products are liquid at 25 °C and are thermally stable over long liquid ranges as determined by thermal gravimetric analyses. Single-crystal X-ray structure determinations show that compounds 9 and 21 crystallize in the monoclinic space groups P2(1)/c and P2(1)/n, respectively. All the new compounds were characterized by ¹H, ¹⁹F and ¹³C NMR, electrospray MS and/or elemental analyses.     

Cascade assembly of N,N′-dialkylbarbituric acids and aldehydes: a simple and efficient one-pot approach to the substituted 1,5-dihydro-2H,2′H-spiro(furo[2,3-d]pyrimidine-6,5′-pyrimidine)-2,2′,4,4′,6′(1′H,3H,3′H)-pentone framework

Cascade assembly of N,N′-dialkylbarbituric acids and aldehydes in the presence of bromine leads to the selective and efficient formation of substituted 1,5-dihydro-2H,2′H-spiro(furo[2,3-d]pyrimidine-6,5′-pyrimidine)-2,2′,4,4′,6′-(1′H,3H,3′H)-pentones in 70-88% yields via a complex cascade process. Spirobarbiturates containing the furo[2,3-d]pyrimidine framework are a class of compounds with interesting pharmacological and physiological activity.     

One-pot synthesis of aliphatic and aromatic 2H-indazolo[2,1-b]phthalazine-triones catalyzed by N-halosulfonamides under solvent-free conditions

N, N, N′, N′-Tetrabromobenzene-1,3-disulfonamide and poly(N-bromo-N-ethylbenzene-1,3-disulfonamide) were used as efficient catalysts for the one-pot synthesis of aliphatic and aromatic 2H-indazolo[2,1-b]phthalazine-triones in excellent yields from aldehydes, phthalhydrazide, and dimedone at 80-100 °C under solvent-free conditions.     

rac-Lactide polymerization using aluminum complexes bearing tetradentate phenoxy-amine ligands

A family of aluminum-methyl complexes supported by tetradentate phenoxy-amine ligands has been prepared and employed in the ring-opening polymerization of rac-lactide; the ligands include N,N-bis(3,5-dimethyl-2-hydroxybenyl)-N′,N′-dimethyl-1,2-diaminoethane (L¹), N,N-bis(3,5-diisopropyl-2-hydroxybenyl)-N′,N′-dimethyl-1,2-diaminoethane (L²) and N,N-bis(3,5-dichloro-2-hydroxybenyl)-N′,N′-dimethyl-1,2-diaminoethane (L³). Polymerizations of rac-lactide were carried out by treatment of the aluminum-methyl complexes with PhCH₂OH and rac-lactide at 70 °C, affording well-controlled formation of polylactide (PLA) and a moderate isotactic bias for initiators bearing L¹ and L²; the chloro-substituted ligand L³ afforded largely atactic PLA.     

Phosphine-free Pd-salen complexes as efficient and inexpensive catalysts for Heck and Suzuki reactions under aerobic conditions

Phosphine-free palladium-salen complexes, N,N′-bis(salicylidene)-ethylenediamino-palladium and N,N′-bis(salicylidene)-1,2-phenylenediamino palladium, are found to be highly active catalysts for the Heck olefination of aryl iodides and Suzuki reaction of aryl iodides and bromides giving excellent yields (70-90%) of products under aerobic conditions, in short reaction times (10-60 min).     

Reaction of ferrocenecarboxylic acid with N,N-disubstituted carbodiimides: synthesis, spectroscopic and X-ray crystallographic analysis of N,N-disubstituted N-ferrocenoylureas and identification of a one-pot coupling reagent for the formation of ferrocenecarboxamides in a non-aqueous solvent

N,N^′-dicyclohexyl-N-ferrocenoylurea 2, N,N^′-diisopropyl-N-ferrocenoylurea 3, N,N^′-di-p-tolyl-N-ferrocenoylurea 4 and N,N^′-di-tert-butyl-N-ferrocenoylurea 5 were obtained by reaction of ferrocenecarboxylic acid 1 with N,N^′-dicyclohexylcarbodiimide (DCC), N,N^′-diisopropylcarbodiimide (DIC), N,N^′-di-p-tolylcarbodiimide 10 and N,N^′-di-tert-butylcarbodiimide 11, respectively. Both N-tert-butyl-N^′-ethyl-N-ferrocenoylurea 6 and N^′-tert-butyl-N-ethyl-N-ferrocenoylurea 7 were obtained by reaction of 1 with N-tert-butyl-N^′-ethylcarbodiimide 12. In all cases a small amount of ferrocenecarboxylic anhydride 8 was formed as a by-product. All compounds were characterized by ¹H NMR, ¹³C NMR, IR and MS. Single crystal X-ray structural analyses were made of 2, 3 and 4. From the consistent results, the reaction products of 1 with carbodiimides appear different from those proposed by some earlier workers. With N-(3-dimethylaminopropyl)-N^′-ethylcarbodiimidehydrochloride 9 ferrocenoylurea was not isolated, but the main product was rather 8. The suitability of 8 as acylation reagent was applied by using 9 to obtain N-(3-triethoxysilyl)-propylferrocenecarboxamide in a one-pot reaction from 1 and 3-(triethoxysilyl)-propylamine.     

Mild and regioselective iodination of aromatic compounds with N,N′-diiodo-N,N′-1,2-ethanediylbis(p-toluenesulphonamide)

N,N′-Diiodo-N,N′-1,2-ethanediylbis(p-tolouenesulphonamide) [NIBTS] and catalytic trifluoroacetic acid can be used for the regioselective iodination of aromatic compounds in acetonitrile under mild conditions in excellent yields.     

A Zn(II) ion selective fluorescence sensor that is not affected by Cd(II)

Comparison of sensors sodium-2,6-diamino-(N,N,N′,N′-tetraacetate)-4-methylanisole 1 and sodium-2,6-diamino-(N,N,N′-triacetate)-4-methylanisole 2 reveal that the loss of an acetyl group in 2 leads to a more selective Zn(II) induced fluorescence enhancement and shows no response to any other metal ions including Cd(II). Structural modifications and AM1 calculations indicate that the sensor uses the three acetyl groups and the 3° amino nitrogen for binding the metal ion. AM1 calculations imply a trigonal bipyramidal coordination for Zn(II) with the solvent molecule occupying one of the axial positions.     

Synthesis and characterization of difunctional blue light-emitting molecules containing hole-transporting triphenylamino units

The synthesis of new difunctional (i.e., light-emitting and hole-transporting) fluorophore molecules, 2,2′-difuryl-4,4′-(N,N,N′,N′-tetraphenyl)diaminobiphenyl and 5,5′-bis(4-N,N′-diphenylaminophenyl)-2,2′-bifuryl, which contain hole-transporting triphenylamino units, are reported. These difunctional molecules emit intense blue photoluminescence and further reveal high HOMO energy values as well as high glass transition temperatures.     

Polymerization of methyl methacrylate in the presence of iron(II) complex with tetradentate nitrogen ligands under conditions of atom transfer radical polymerization

Four tetradentate nitrogen ligands, viz. dichloro{[N,N^′-diphenyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (1), {[N,N^′-dioctyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (2), {[N,N^′-dibenzyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (3), and (1R,2R)-(−)-N,N^′-di(quinoline-2-methyl) di-iminocyclohexane (4), were investigated as novel complexing ligands in iron-mediated atom transfer radical polymerization (ATRP) of methyl methacrylate where ethyl-2-bromoisobutyrate was the initiator in o-xylene at 90 °C. With ligands 1 and 2 the experimental molecular weights increased gradually with monomer conversion. High to moderate conversions (87%, 43%) were obtained in relatively short times (90 min for 1 and 30 min for 2), which indicates an efficient catalyst system, but after these times a dramatic increase in viscosity of the polymerization medium led to loss of control. It is noteworthy that polymerization proceeded in a controlled manner with ligand 1, which has two rather bulky substituents on the N-atom. Such bulky ligands did not work for a copper-based system, where they led to excessive terminations or other side reactions. When the bulkiness of the substituents was significantly increased, as in ligand 3, a decrease in polymerization rate and loss of control occurred. Ligand 4 was less efficient than the other ligands, probably because the ethylene bridge was replaced by cyclohexane bridge.     

Cobalt complexes of a selenium diimide and a tellurium diimide dimer

[CoCl₂{N,N′-Te₂(N^tBu)₄}] (1) was obtained in good yields by the reaction of equimolar amounts of (^tBu)NTe(μ-N^tBu)₂TeN(^tBu) and CoCl₂ in toluene under an argon atmosphere. The crystal structure of 1·CH₂Cl₂ showed that the dimeric tellurium diimide ligand is N,N′-chelated to cobalt. The related reaction of Se(N^tBu)₂ and CoCl₂ affords a green product tentatively identified as a 1:1 adduct [CoCl₂{N,N′-Se(N^tBu)₂}] (CHN analysis). However, recrystallization from thf produces the ion-separated complex [Co₂(μ-Cl)₃{N,N′-Se(N^tBu)₂}₂(thf)₂][CoCl₃{NH₂(^tBu)}]·1½thf (2·1½thf), in which the monomeric selenium diimide ligand is N,N′-chelated to cobalt in the cation. A pathway for the formation of 2 from [CoCl₂{N,N′-Se(N^tBu)₂}] in thf is proposed.     

Characterization and optimization of poly(glycidyl methacrylate-co-styrene) synthesized by atom transfer radical polymerization

Styrene (S) and glycidyl methacrylate (GMA) copolymers were synthesized by atom transfer radical polymerization (ATRP) under different conditions. The effect of initiators, ligands, solvents, and temperature to the linear first-order kinetics and polydispersity index (PDI) was investigated for bulk polymerization. First-order kinetics was observed between linearly increasing molecular weight versus conversion and low polydispersities (PDI) were achieved for ethyl 2-bromo isobutyrate (EBiB) as an initiator and N,N′,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA)/CuBr as a catalyst. The copolymers with different compositions were synthesized using different in-feed ratios of monomers. Copolymers composition was calculated from ¹H NMR spectra which were further confirmed by quantitative ¹³C{¹H} NMR spectra. The monomer reactivity ratios were obtained with the help of Mayo-Lewis equation using genetic algorithm method. The values of reactivity ratios for glycidyl methacrylate and styrene monomers are r_G = 0.73 and r_S = 0.42, respectively.     

Push-pull alkenes from cyclic ketene-N,N′-acetals: a wide span of double bond lengths and twist angles

Push-pull alkenes can be quickly accessed by cyclic ketene-N,N′-acetal chemistry. A number of push-pull structures with a wide span of double bond lengths and twist angles were synthesized from the reactions of (1) N,N′-dimethyl cyclic ketene-N,N′-acetals with isocyanates, (2) the products from (1) with isocyanates, (3) 2-methylimidazoline and 2-methyl-1,4,5,6-tetrahydropyrimidine with diacid chlorides, (4) 2-methylimidazoline, and 1,2-dimethyl-1,4,5,6-tetrahydropyrimidine with benzoyl chlorides, and (5) 1,2-dimethylimidazoline and 1,2-dimethyl-1,4,5,6-tetrahydropyrimidine with aryl isocyanates. These reactions proceed under very mild conditions and give moderate to excellent yields. X-ray crystallographic analysis of eight pxush-pull alkenes indicates that the central double bond lengths and twists are sensitive to the ring sizes (5 or 6), ring structures (fused or non-fused), electron donating and withdrawing strengths of pushing and pulling portions, respectively, number of electron pushing or pulling groups and substituent steric effects.     

Synthesis of a novel bridged nucleoside bearing a fused-azetidine ring, 3′-amino-3′,4′-BNA monomer

A novel bridged nucleic acid monomer, 3′-amino-3′-deoxy-5-methyl-3′-N,4′-C-methyleneuridine, was successfully synthesized via a useful and convenient azetidine ring formation under Staudinger's conditions. A ¹H NMR experiment and a PM3 calculation revealed that the sugar moiety of the novel bridged nucleic acid monomer, 3′-amino-3′,4′-BNA, was restricted to S-type conformation.