The flammability properties of copolyesters and copolycarbonates containing acetylenes

The flammability properties of copolyesters and copolycarbonates containing varying percentages of 2-butyne-1,4-diol and 2,4-hexadiyne-1,6-diol were studied by use of oxygen index and dynamic thermogravimetry. The char formation was found to increase with increasing polymer unsaturation. For nonconjugated acetylenes there is an increase in the oxygen index with increasing unsaturation in a polymer. In contrast, conjugated acetylenes dramatically decrease the oxygen index of a polymer system.     

萘环荧光离子液体合成、表征及光谱性能研究

以1-氯甲基萘和N-烷基咪唑为原料,四氢呋喃为溶剂,合成了5个具有荧光的新型离子液体.采用红外光谱(FT-IR)、核磁共振氢谱(1H NMR)、碳谱(13C NMR)等测试技术对产物进行了结构表征.并对其紫外光谱、荧光光谱等光谱性质进行了初步的研究.实验结果表明咪唑离子液体1,2二甲基-4-甲基萘咪唑氯化盐较咪唑离离子...     

Luminescence properties of 5-oxazolone derivatives containing a pyrazoline ring

New difluorophors have been synthesized containing both 2-phenyl-4-benzyliden-5-oxazolone and 1,3,5-tri-aryl-2-pyrazoline fragments. A study was carried out on the effect of the structure of these compounds on their spectroluminescence properties in solvents of different polarity. Positive solvatofl uorochromy was detected. The use of these compounds as luminescent dyes for polymers was proposed taking account of their solvatofuorochromic effects.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 407–410, March, 1994.     

Segmented conjugated macromolecules containing silicon and boron: ADMET synthesis and luminescent properties

Boron‐ and silicon‐containing conjugated homo‐ and copolymers could be synthesized using acyclic diene metathesis (ADMET) condensation of bis‐styryl monomers. Both, tri‐and tetra‐coordinated boron monomers were successfully polymerized forming homopolymers, or random copolymers (if polymerized together with a silicon containing co‐monomer). Polymer molecular weights M_n were measured at ～6000 to 15,000 g/mol (NMR end group analysis) with molecular weight distributions M_w/M_n ～1.8 to 2.2. The polymers absorbed at λ_max ～317 to 406 nm and emitted at λ_max ～370 to 494 nm with fluorescent quantum efficiencies ～24 to 48%. The copolymer with tri‐coordinate boron showed highly efficient fluorescence quenching in the presence of fluoride ions at ratios boron/fluoride ～5/1, demonstrating its potential as anion sensor. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1707–1718     

Synthesis and chirooptical properties of some tertiary amines containing a pyridine ring

Tertiary amines of the pyridine series containing an -phenylethylamine residue have been synthesized. The IR spectra and circular dichroisms of these amines have been measured in the 400–200 nm interval, and an assignment of the bands has been made. It is suggested that the long-wave absorption band in the 315 nm region for N-methyl-N-[2-(pyridin-2-yl) ethyl]--phenylethylamine and the Cotton effect corresponding to it are due to an intramolecular CTC.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 92–96, January, 1984.     

Heterocyclic radical mediated synthesis and fluorescence properties of conjugated polyene ketones

A straightforward route for the preparation of decatetraene diketone derivates is presented. The synthesis has been accomplished by a one-step procedure starting from phenyl-substituted pyrylium perchlorates, and an elaborate heterocyclic α-radical mechanism was proposed. This class of molecules displays a crystallization induced emission enhancement property.     

Synthesis and magnetic properties of complexes of a conjugated hyperbranched polymer containing bithiazole rings

A novel conjugated hyperbranched polymer containing bithiazole rings（PBTADB） was synthesized by polycondensation of 1,3,5-benzenetricarboxaldehyde and 2,2’-diamino-4,4’-bithiazole（DABT）.The structure of the hyperbranched polymer was confirmed by FT-IR and ¹H-NMR.PBTADB dissolved in organic polar solvents such as DMSO and NMP.Bithiazole rings were introduced to provide bidentate N-donor sites for binding metal ions.The metal complexes were prepared by chelation of the polymer with Co²⁺ and Sm³⁺.The magnetic behavior of coordination compounds was measured as a function of magnetic field strength（0-4.8×10⁶ A/m） at 5 K and as a function of temperature（5-300 K） at magnetic field strength of 2.4×10⁶ A/m.The magnetic hysteresis loops of PBTADB-Sm³⁺and PBTADB-Co²⁺showed the typical ’S’ shape at 5 K with the Curie-Weiss temperature T_θ=96 K and 41 K respectively.The results show that they exhibit properties of soft ferromagnetic materials.     

Syntheses and properties of vinyl monomers containing a meso-tetraphenylporphin ring and their copolymers

To synthesize polymer-covalently bonded meso-tetraphenylporphin derivatives, two porphyrin vinyl monomers, viz., 5-mono(p-acrylamidophenyl)-10,15,20-triphenylporphin and 5,10,15,20-tetra(α,α,α,α-o-methacrylamidophenyl)porphin, were prepared and characterized by elemental analyses, nuclear magnetic resonance, infrared and mass spectrometry. The porphin-bonded polymers were synthesized by radical copolymerization of the porphin monomers with styrene and other monomers and purified by gel permeation chromatography. The spectral properties of these compounds in the Q-band region are also discussed.     

Synthesis and photophysical properties of new conjugated fluorophores designed for two-photon-excited fluorescence

[structure: see text] Novel elongated push-push fluorophores (e.g., 9) were synthesized by 2-fold Sonogashira or Wittigminus signHorner reactions. Modulation of the length and topology of the conjugated connectors allows tuning of their photophysical properties. In addition, their photoluminescence can be adjusted by playing on polarity. Derivatives combining enhanced two-photon absorption cross section (sigma2) in the visible red and high fluorescence quantum yield (Phi) have been obtained. Such fluorophores hold promise for nonlinear imaging of biological systems.     

A guide to Sonogashira cross-coupling reactions: the influence of substituents in aryl bromides, acetylenes, and phosphines

The conversion-time data for 168 different Pd/Cu-catalyzed Sonogashira cross-coupling reactions of five arylacetylenes (phenylacetylene; 1-ethynyl-2-ethylbenzene; 1-ethynyl-2,4,6-R(3)-benzene (R = Me, Et, i-Pr)) and Me(3)SiCCH with seven aryl bromides (three 2-R-bromobenzenes (R = Me, Et, i-Pr); 2,6-Me(2)-bromobenzene and three 2,4,6-R(3)-bromobenzenes (R = Me, Et, i-Pr)) with four different phosphines (P-t-Bu(3), t-Bu(2)PCy, t-BuPCy(2), PCy(3)) were determined using quantitative gas chromatography. The stereoelectronic properties of the substituents in the aryl bromides, acetylenes, and phosphines were correlated with the performance in Sonogashira reactions. It was found that the nature of the most active Pd/PR(3) complex for a Sonogashira transformation is primarily determined by the steric bulk of the acetylene; ideal catalysts are: Pd/P-t-Bu(3) or Pd/t-Bu(2)PCy for sterically undemanding phenylacetylene, Pd/t-BuPCy(2) for 2- and 2,6-substituted arylacetylenes or Me(3)SiCCH and Pd/PCy(3) for extremely bulky acetylenes and aryl bromides. Electron-rich and sterically demanding aryl bromides with substituents in the 2- or the 2,6-position require larger amounts of catalyst than 4-substituted aryl bromides. The synthesis of tolanes with bulky groups at one of the two aryl rings is best done by placing the steric bulk at the arylacetylene, which is also the best place for electron-withdrawing substituents.     

Mass spectrometric study of conjugated bifunctional acetylenes: 2—Ynals and ynones

This study is based on results obtained by new techniques for observing metastable ions which make it possible to determine the fragmentation paths of conjugated ynals and ynones. For the ynals, the most interesting fragment is the [M–28]⁺˙ ion. For the ynones, when a McLafferty rearrangement is feasible, the ion arising therefrom is more abundant than the [M? CO]^+. ion. However, this elimination of a neutral CO molecule is quite important for the true acetylene ketones.     

Synthesis, characterization and photovoltaic properties of thiophene copolymers containing conjugated side-chain

Five side-chain conjugated polythiophene derivatives, P1-P5, were synthesized by Stille coupling reaction. The effects of side-chain structures, bearing CC double bond, CC triple bond as well as different number of methoxy substituents on the benzene ring of the side-chains, on the optical, electrochemical, and photovoltaic properties of the polymers were investigated. From P1 to P3, the effect of CC triple bond and CC double bond was compared. The results indicate that the content of the thiophene units with the CC triple bond in their conjugated side-chains not only influences the absorption shape and intensity, but also influences the energy bandgap and the photovoltaic properties of the polymers. From P3 to P5, the effect of methoxy substituents on the benzene ring of the conjugated side-chains was compared. On increasing the number of the methoxy groups on the benzene ring of the conjugated side chains, the visible π-π^∗ absorption of the conjugated polymer backbone become stronger both in solution and in film. Electron-donating ability of the methoxy groups decreased the bandgap of the polymers. The best polymer solar cell based on P5 with a structure of ITO/PEDOT:PSS/Polymer:PCBM (1:1 wt/wt)/Mg/Al showed a power conversion efficiency of 1.45% under the illumination of AM1.5, 80 mW/cm².     

Synthesis of conjugated copolymers containing phenothiazinylene vinylene moieties and their electrooptic properties

Four different types of conjugated copolymers, consisting of alternating structures of phenothiazinylene vinylene and phenylene vinylene derivatives such as phenylene vinylene, 1,1′‐biphenyl‐4,4′‐ylene vinylene, 2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐phenylene vinylene, and 9,10‐anthrylene vinylene, were prepared by Horner–Emmons condensation between appropriate diphosphonates and dialdehydes. Single‐layer and double‐layer light‐emitting diodes were fabricated with the synthesized conjugated polymers, and their electroluminescent properties were investigated. Poly(N‐2‐ethylhexyl‐3,6‐phenothiazinylene vinylene‐alt‐9,10‐anthrylene vinylene), containing phenothiazinylene vinylene and anthrylene vinylene as repeat units, emitted a reddish‐orange color with Commission Internationale de l'Eclairage coordinates of x = 0.6173 and y = 0.3814 that was very similar to the National Television System Committee standard red, and it showed a bipolar carrier‐injection/transporting capability caused by electron‐withdrawing anthracene and electron‐donating amino groups. Poly[N‐2‐ethylhexyl‐3,6‐phenothiazinylene vinylene‐alt‐2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐phenylene vinylene], containing phenothiazinylene vinylene and dialkoxy phenylene vinylene moieties, showed excellent hole‐injection/transporting capability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2502–2511, 2003     

Influence of the surfactant chain length on the fluorescence properties of a water-soluble conjugated polymer

In this work, we report the influence of surfactant chain length and surfactant concentration on the photoluminescence (PL) of water-soluble pi-conjugated poly(thienyl ethylene oxide butyl sulfonate) (PTE-BS). We have used alkylammomium surfactants with 8, 9, 10, and 12 carbon atoms per hydrocarbon chain. The surfactant concentration was varied from 0.125 the critical micelle concentration (CMC) up to 2 times the CMC. The results show that at premicellar concentrations all the surfactants promote the polymer aggregation inducing an increase in the interchain charge transfer by pi-pi interactions, which competes with PL emission processes. However, in the premicellar range, the polymer PL emission is sharply affected by the surfactant chain length. Thus, the PL is quenched by the surfactants with the shortest tails, whereas the surfactants with the longest ones provoke an enhancement of the PL emission. This behavior has been associated with the capacity of the surfactants with the longest hydrocarbon chains to accommodate their tails inside the polymer, obstructing the appearance of pi-pi interchain interactions during aggregation and reducing intrachain defects. By contrast, at the CMC, the surfactant chain length does not modify the PL emission, since the excess of surfactant inhibits polymer aggregation, thus enhancing the efficiency of light emissive processes.     

Spectroscopy of conjugated polymers: phosphorescence and delayed fluorescence

We report on the observation of delayed fluorescence (DF) and phosphorescence (P) from films and dilute frozen solutions of various conjugated polymers of the PPP‐type. The materials differ with respect to the rotational freedom along the polymer backbone. Upon pulsed optical excitation into the S₁←S₀ transition of the materials, delayed emission occurs on a time scale of μs to ms in solid films at 80 K. The phosphorescence in dilute frozen solution decays monoexponentially with a radiative lifetime on the order of one second. The data analysis reveals that the DF is caused by recombination of geminate electron hole pairs rather than triplet‐triplet annihilation. This conclusion is supported by investigations of the response of the DF to an applied electric field.     

Novel conjugated polymer containing aromatic ring and selenium in backbone: Addition polymerization of 1,4-benzenediselenol to 1,4-diethynylbenzene

A novel addition polymerization of 1,4-benzenediselenol (BDSe) to 1,4-diethynylbenzene (DEB) was carried out by UV-irradiation in toluene at 60°C under nitrogen atmosphere. The polymerization proceeded at such a fast rate as to give 60–70% yield for 6 min. A paleyellowish polymer (M?_n = 20000–30000) precipitated with the progress of the polymerization. In the presence of BPO, the polymerization also proceeded rapidly to give the polymer (M?_n = 18000) in 50% yield for 4 min. The polymer was insoluble in conventional organic solvents. In the IR spectrum of the polymer, the characteristic absorption bands of cis- and trans-vinylene groups appeared at 1340 and 940 cm^?1, respectively. The microstructures of polymers were evaluated as the cis content was 90% and the trans one was 10%, based on the model adducts of benzeneselenol and ethynylbenzene. The cis ← trans isomerization occurred with UV-irradiation: the cis vinylene group of the polymer decreased from 90 to 40% for 18 h. The electrical conductivity of the polymer was in the order of 10^?13 S/cm without dopant, but increased up to 10^?5 S/cm on I₂ doping. DSC and TG thermograms of the polymer indicated its decomposition point as 465°C under nitrogen atmosphere.     

Geometry and mesomorphic properties of new schiff bases containing thiazole ring

New liquid-crystalline azomethines — 2-(4-alkoxybenzylideneamino)-4-(3-nitrophenylamino)thiazoles —displaying nematic mesomorphism at 42–137°C have been synthesized. The structure of these compounds was studied by the MNDO LCAO MO method. A correlation was found between the geometric parameters and liquid crystal properties.Bashkir State University, 450074 Ufa, Russia. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1242–1248, September, 1999.     

Tropone‐containing π‐conjugated polymers: Annulation of tropone onto benzene ring in the conjugated polymer

Tropone‐fused, various π‐conjugated polymers ( P2 – P5 ) were synthesized by the palladium‐catalyzed coupling reaction of 1,4‐dibromo‐6,8‐dimethyl‐7H‐benzocyclohepten‐7‐one with aromatic divinyl, diboronic acid, and diethynyl compounds. The molecular orbital calculation of the model compounds was performed to discuss effective conjugation length of the repeating unit of the polymers. The absorption spectra of phenylenevinylene‐type polymers shifted to longer wavelengths than the model compounds by about 60 nm. They exhibited green fluorescence [λ_max(em) = 544 and 561 nm]. The absorption spectrum of a phenylene‐type polymer blueshifted by 10 nm; however, that of a phenyleneethynylene‐type polymer redshifted by 83 nm as compared with their model compounds. They showed fluorescence with peak maxima at 457 and 489 nm, respectively. As a result, the absorption spectra of phenylene‐ and phenylenevinylene‐type polymers blueshifted, but that of a phenyleneethynylene‐type polymer redshifted by the annulation of tropone onto a benzene ring in the conjugated polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1208–1215, 2004     

Synthesis and characterization of conjugated polymers containing a carbazole moiety

Two series of conjugated polymers with a carbazole moiety were synthesized by Knovenagel and Wittig condensations. The chemical structure, thermogravimetric, photophysical and electrochemical properties of the polymers were characterized by ¹H‐NMR, IR, GPC, TG, UV‐vis, FL, and CV. The results indicated that PBM is the most thermally stable one and PBP is the most thermally instable one. The absorption and emission properties of the polymers were adjusted by the modification of chemical structures. The quenching effect of cyano group and oxygen atom results in the lower fluorescence quantum efficiency. The fitted emission spectra suggested that the emission spectra of all the polymers come from different vibronic transitions and aggregation emission. Copyright © 2008 John Wiley & Sons, Ltd.