Heterogeneous dehalogenation of arylhalides in the presence of ionic liquids

Dehydrohalogenation of haloaromatics in ionic liquids derived from ethylmethylimidazolium or similar salts has been performed using Pd? C, Pd(OAc)₂ and other catalysts using formate salts as a hydrogen source. In the ionic liquid [emim][BF₄], chlorobenzene was dehalogenated by up to 40%, bromobenzene up to 25% and iodobenzene up to 41% in 2 h. Reactions in the absence of the ionic liquid were also performed. Copyright © 2007 John Wiley & Sons, Ltd.     

Effect of ionic liquids in unimolecular solvolysis reactions involving carbocationic intermediates

Solvolysis studies of pivaloyl triflate were performed using ionic liquid/methanol solvent mixtures. The rearranged carbocation intermediate reacts with methanol via nucleophilic attack or elimination of a proton. Relative amounts of products were determined through ¹H NMR analysis. For most ionic liquids, increasing the ionic liquid:methanol ratio leads to increased yields of elimination product. Product ratios vary based on Kamlet–Taft solvatochromic parameters of hydrogen bond donating and accepting ability of the ionic liquid.     

Biased spectroscopic protein quantification in the presence of ionic liquids

Owing to their unique physicochemical properties, ionic liquids have gained much recognition as solvents or co-solvents in a wide variety of biochemical applications. In the context of protein analytics, four similar 1-alkyl-3-methylimidazolium-based ionic liquids have been analysed for their applicability as co-solvents. Spectroscopic bovine serum albumin (BSA) quantification experiments in the presence of ionic liquids were performed and for two ionic liquids a concentration-dependent effect has been found that can lead to biased protein quantification. It could be shown that the biased spectroscopic analysis of the tested ionic liquids is dependent on the length of the alkyl side chain (>C₄) of the 1-alkyl-3-methylimidazolium-based cation, and the chaotropicity of the anion. Once accounted for and properly calibrated when using spectroscopic methods, these effects can be avoided thus facilitating correct protein quantification in the presence of ionic liquids.     

Ionic strength dependence of formation constants, complexation of nitrilotriacetic acid with tungsten(VI) ion

The dependence on ionic strength of protonation of nitrilotriacetic acid and its complexation with W(VI) is reported in sodium perchlorate, sodium nitrate and sodium chloride solutions as background salts. The measurements have been performed at 25°C and various ionic strengths in the range 0.1–1.0 mol dm⁻³, using a combination of potentiometric and spectrophotometric techniques. The overall analysis of the present and the previous data dealing with the determination of stability constants at different ionic strengths allowed us to obtain a general equation, by which a formation constant determined at a fixed ionic strength can be calculated, with a good approximation, at another ionic strength, if 0.1 ≤ ionic strength ≤ 1.0 mol dm⁻³ sodium perchlorate, sodium nitrate or sodium chloride.     

Versatile heat resistant solid electrolytes with performances of liquid electrolytes

The confinement of ionic liquids (room temperature molten salts) within a porous silica matrix was performed by a one-step non-hydrolytic sol–gel route, leading to hybrid materials featuring both the mechanic and transparency properties of silica gels and the high ionic conductivity of ionic liquids, as well as a thermal stability up to around 550 K. Butylmethylimidazolium [BMI] or butylpyridinium [BPy] as cations with bis(trifluorosulfonyl)imide [TFSI] or tetrafluoroborate [BF₄] as anions along with a silica matrix showed similar properties.     

The influence of ionic and elastic effects on partial switching in ferroelectric liquid crystal devices

Abstract

The simultaneous influences of elastic stress and ionic fields on switching in ferroelectric liquid crystals are considered. Experiments are performed which show that the combined influences can be quite complex. When a reset pulse is applied, it can enhance or decrease the previous ionic field, as well as change the elastic state of the pixel so that when the reset and switching pulses are close together, the combination of these effects influences the result significantly. In some situations, the outcome from simple partial switching schemes cannot be explained from ionic and elastic effects; we suggest a surface switching effect in this case.     

Ionic liquids as additives in high performance liquid chromatography: Analysis of amines and the interaction mechanism of ionic liquids

As novel solvents, ionic liquids have many applications in synthesis, catalysis and analytical separation, i.e. extraction and chromatography separation. In this paper, some amines including benzidine, benzylamine, N-ethylaniline and N,N′-dimethylaniline are separated using ionic liquids as additives for the mobile phase in high performance liquid chromatography (HPLC). The effects of the length of alkyl chain or counterions on different ionic liquids and their concentrations on the separation of these analytes are performed. The differences between ionic liquids and tetrabutylammonium bromide (TBA) on the separation of o-, m-, p-phthalic acids are compared and the results show that ionic liquids are ion-pair reagents in essence, although their hydrophobicity and hydrogen bonding also play important roles.     

Improved catalysis of Morita-Baylis-Hillman reaction. The strong synergic effect using both an imidazolic ionic liquid and a temperature

The effect of different catalytic conditions for the Morita-Baylis-Hillman reaction has been evaluated both experimentally and by chemometry. The use of either ultrasound at 0 °C, ultrasound with an imidazolic ionic liquid at 0 °C or the ionic liquid catalyst at 0 and 50 °C was systematically tested. A strong synergic effect, which significantly increases the reaction rates and yields, was observed when the reactions were performed using an imidazolic ionic liquid catalyst at both 0 and 50 °C.     

Efficient combination of task-specific ionic liquid and microwave dielectric heating applied to one-pot three component synthesis of a small library of 4-thiazolidinones

The first report of the use of task-specific ionic liquid as synthetic equivalent of ionic liquid-phase matrice for the preparation of a small library of 4-thiazolidinones is reported in this paper. The starting (ethyleneglycol)ionic liquid-phase is functionalized in good yields with 4-(formylphenoxy)butyric acid by using usual esterification reaction conditions (DCC/DMAP as catalyst). The synthesis of the ionic liquid-phase bound 4-thiazolidinones was performed by a one-pot three-component condensation under microwave dielectric heating. The final cleavage under microwave/catalysis strategy provides the expected 4-thiazolidinones in high purity after flash-chromatography purification. According to the ionic liquid-phase organic synthesis (IoLiPOS) methodology, it was found that optimized reaction conditions were performed by standard analytical methods (NMR, TLC). The ¹H, ¹³C NMR spectrum of some representative 4-thiazolidinones and ionic liquid-phase bound benzaldehyde are also reported.     

The influence of ionic and elastic effects on partial switching in ferroelectric liquid crystal devices

The simultaneous influences of elastic stress and ionic fields on switching in ferroelectric liquid crystals are considered. Experiments are performed which show that the combined influences can be quite complex. When a reset pulse is applied, it can enhance or decrease the previous ionic field, as well as change the elastic state of the pixel so that when the reset and switching pulses are close together, the combination of these effects influences the result significantly. In some situations, the outcome from simple partial switching schemes cannot be explained from ionic and elastic effects; we suggest a surface switching effect in this case.     

Synthesis of multiblock ionomers by copolymerization in inverse microemulsions

The synthesis of ionomers with randomly distributed ionic blocks was achieved by free radical copolymerization of a hydrophobic monomer with an ionic comonomer in inverse microemulsions. The ionic monomer, sodium acrylate (approximately 1 mol% based on the monomer feed) is encapsulated in the aqueous compartments of inverse micelles of sodium bis-(2-ethylhexyl)sulfosuccinate. The hydrophobic monomer, methyl methacrylate or butyl acrylate, is dissolved together with the initiator in the oil continuous phase (toluene). For a given hydrophobe/ionic monomer ratio, it is possible to tune the length of the ionic block in the ionomer by adjusting the initial number of ionic monomers per water droplet, N _H. The ionomers were obtained in their Na salt form and converted thereafter into Ca salts. Differential scanning calorimetry measurements performed on both series show a decrease in the glass-transition temperature for the Ca-poly(methyl methacrylate) ionomers upon increasing N _H. The results are discussed in terms of the nature of the counterion and of the ionomer microstructure. Received: 8 August 2000 Accepted: 24 October 2000     

Dioxouranium(VI)--carboxylate complexes. Interaction with dicarboxylic acids in aqueous solution: speciation and structure

In this paper we report the results of an investigation performed by potentiometric (H+-glass electrode) and visible spectrophotometric measurements on the interaction of UO2(2+) ion towards some carboxylic ligands (acetate, malonate, succinate, azelate). The measurements were carried out at T= 25 degrees C in different ionic media (KNO3 and NaCl) at different ionic strengths (0.1 < or = I/mol L(-1) < or = 1.0, NaCl; I/mol L(-1) = 0.1, KNO3). The dependence on ionic strength of formation constants was taken into account by using both a simple Debye-Hückel type equation and the SIT (Specific ion Interaction Theory) approach. Different speciation models (depending on concentration of reagents, ionic strength, pH-range) both for different carboxylates and different ionic media have been obtained. Linear combinations between formation constants, stoichiometric coefficients and length of alkyl chain of dicarboxylates have been observed and predicted formation constants at I= 0 mol L(-1) are reported for the interaction of UO2(2+) with HOOC-(CH2)n-COOH with 1 < or = n < or = 7. Finally, a visible absorption spectrum for each complex reaching a significant percentage of formation in solution (KNO3 medium) has been calculated to characterise the compounds found by pH-metric refinement.     

Heterogeneous oxidation of pyrimidine and alkyl thioethers in ionic liquids over mesoporous Ti or Ti/Ge catalysts

Heterogeneous catalytic oxidation of a series of thioethers (2-thiomethylpyrimidine, 2-thiomethyl-4,6-dimethyl-pyrimidine, 2-thiobenzylpyrimidine, 2-thiobenzyl-4,6-dimethylpyrimidine, thioanisole, and n-heptyl methyl sulfide) was performed in ionic liquids by using MCM-41 and UVM-type mesoporous catalysts containing Ti, or Ti and Ge. A range of triflate, tetrafluoroborate, trifluoroacetate, lactate and bis(trifluoromethanesulfonyl)imide-based ionic liquids were used. The oxidations were carried out by using anhydrous hydrogen peroxide or the urea-hydrogen peroxide adduct and showed that ionic liquids are very effective solvents, achieving greater reactivity and selectivity than reactions performed in dioxane. The effects of halide and acid impurities on the reactions were also investigated. Recycling experiments on catalysts were carried out in order to evaluate Ti leaching and its effect on activity and selectivity.     

Interaction study of a lysozyme‐binding aptamer with mono‐ and divalent cations by ACE

Binding between an aptamer and its target is highly dependent on the conformation of the aptamer molecule, this latter seeming to be affected by a variety of cations. As only a few studies have reported on the interactions of monovalent or divalent cations with aptamers, we describe herein the use of ACE in its mobility shift format for investigating interactions between various monovalent (Na⁺, K⁺, Cs⁺) or divalent (Mg²⁺, Ca²⁺, Ba²⁺) cations and a 30‐mer lysozyme‐binding aptamer. This study was performed in BGEs of different natures (phosphate and MOPS buffers) and ionic strengths. First, the effective charges of the aptamer in 30 mM ionic strength phosphate and MOPS (pH 7.0) were estimated to be 7.4 and 3.6, respectively. Then, corrections for ionic strength and counterion condensation effects were performed for all studies. The effective mobility shift was attributed not only to these effects, but also to a possible interaction with the buffer components (binary or ternary complexes) as well as possible conformational changes of the aptamer. Finally, apparent binding constants were calculated for divalent cations with mathematical linearization methods, and the influence of the nature of the BGE was evidenced.     

Ionic Liquid–Mediated Knoevenagel Condensation of Meldrum's Acid and Aldehydes

A simple, efficient, and green protocol for Knoevenagel condensation of Meldrum's acid and aldehydes in ionic liquid at room temperature without any catalyst is described. The reaction has been performed in different ionic liquids. The enhancement in the rate is observed in Brönsted acidic ionic liquid 1‐methylimidazolium trifluoroacetate [Hmim]Tfa, which furnishes quantitative yields with 4–30 min in most of the cases. Furthermore, ionic liquid is easily reused without any appreciable loss in activity.     

Ionic liquids as a convenient recyclable medium for the generation of transient carbonyl ylides: syntheses of oxa and dioxa-bridged polycyclic systems

The tandem cyclization-cycloaddition reactions of α-diazo ketones in the presence of rhodium(II) acetate, rhodium(II) octanoate or copper(II) acetyl acetonate as catalyst were performed in different imidazole based ionic liquids as solvent. A successful generation of the transient five- or six-membered-ring carbonyl ylides, followed by the 1,3-dipolar cycloaddition with olefin or carbonyl functional groups in ionic liquid is described to furnish the oxa and dioxa-bridged polycyclic systems with high stereoselectivity. Significant advantages of this process are the recovery of rhodium catalyst, the re-use of ionic liquid, replacement of hazardous organic solvents and the resulting high stereoselectivity.     

Ionic liquids/[bmim][N3] mixtures: promising media for the synthesis of aryl azides by SNAr

The nucleophilic aromatic substitution of some activated aryl or heteroaryl halides has been performed in ionic liquid solution, using the 1-butyl-3-methylimidazolium azide as a nucleophile. The reaction course was studied varying the structures of both substrates and ionic liquids. In particular, in the latter case, the reaction of 2-bromo-5-nitrothiophene was carried out in five different ionic liquids ([bmim][BF 4], [bmim][PF 6], [bmim][NTf 2], [bm 2im][NTf 2], and [bmpyrr][NTf 2]). Finally, for all the substrates considered, a comparison with data obtained in MeOH solution in the presence of NaN 3 was also performed. Data collected indicate that in some cases it is possible to obtain aromatic or heteroaromatic azide derivatives in satisfactory yield by means of a S NAr reaction using [bmim][N 3] as the nucleophile.     

Biphasic hydroformylation in ionic liquids: interaction between phosphane ligands and imidazolium triflate, toward an asymmetric process

Biphasic hydroformylation of dec-1-ene and styrene, at commercially competitive rates, can be successfully performed in imidazolium triflate ionic liquids; the ionic liquid network forms 'inclusion complexes' with the phosphane ligands used to modify the rhodium catalyst.     

A study about pH chemically modified electrodes based on amino-derivatives of naphthalene

On the basis of the study of synergistic sensitizing effect of mixed ionic and nonionic surfactants on a series of color reactions, the synergistic effect of mixed solubilizers (or dispersing agents) was investigated. The systems examined included the mixture of a surfactant (either ionic and nonionic) with soluble macromolecular compounds (e.g. PVA or arabic gum) or with -cyclodextrin. The mixed solubilizers often performed synergism of solubilization, sensitization and stabilization on the systems studied, and for certain cases the selectivity was also improved.     

Gram scale,metal-free and selective aerobic oxidation of alcohol and alkyl benzenes using homogeneous recyclable TAIm[MnO4] oxidative ionic liquid under mild conditions: Microwave/ ultrasonic-assisted to carboxylic acid

A homogeneous catalyst-free system has been developed for the selective oxidation of alcohols and alkyl benzenes to the corresponding carbonyl compounds using a recyclable TAIm[MnO₄] oxidative ionic liquid. The reactions were performed in the presence of previously reported TAIm[MnO₄]/ TAIm[OH] ionic liquids and KMnO₄ at ambient temperature under solvent-free conditions. Benzyl alcohols were selectively transferred to benzaldehydes, while under ultrasonic or microwave irradiation, they oxidized to benzoic acid selectively and directly. Scalability of the process also studied at high scale. Also, the ionic liquid could be readily recycled from the aqueous mixture and reused for several consecutive times without any pre-treatment and loss of catalytic activity. In this work, the highly active and toxic KMnO₄ salt has been transformed into a mild recyclable oxidant reagent with high selectivity towards alcohol oxidation.