A unique rate-accelerating effect of certain amino acids in the H2O2 oxidation of alkanes catalyzed by a dinuclear manganese complex containing 1,4,7-trimethyl-1,4,7-triazacyclononane

Certain amino acids used in small amounts (10 catalyst equiv) strongly accelerate the H₂O₂ oxidation of cyclohexane catalyzed by a dinuclear manganese(IV) complex with 1,4,7-trimethyl-1,4,7-triazacyclononane. The efficiency of the co-catalyst dramatically depends on the nature and structure of the acid. Pyrazine-2,3-dicarboxylic acid (2,3-PDCA) has been found to be the most efficient co-catalyst whereas picolinic acid is almost inactive in this oxidation. The highest rate has been attained when 2,3-PDCA was used in combination with trifluoroacetic acid.     

Facile oxygenation of organic sulfides with H2O2 catalyzed by Mn-Me3TACN compounds

Two binuclear Mn-Me₃TACN (Me₃TACN is 1,4,7-N,N′,N″-trimethyl-1,4,7-triazacyclononane) compounds catalyze the oxygenation of organic sulfides utilizing H₂O₂ under ambient conditions. Both phenyl sulfide and ethyl phenyl sulfide were converted to the corresponding sulfones and chloroethyl phenyl sulfide proceeds to its elimination product of phenyl vinyl sulfone.     

The synthesis of an isopropyl substituted 1,4,7-triazacyclononane via an in situ sequential macrocyclisation method

Using L-valine methyl ester hydrochloride as starting material, the synthesis of (2S)-2-isopropyl-1,4,7-trimethyl-1,4,7-triazacyclononane is described. Various standard Richman-Atkins cyclisation methods gave only poor yields in the key macrocyclisation step. Efficient macrocyclisation yields were, however, realised when an in situ sequential cyclisation method was developed.     

Oxidations by the system ‘hydrogen peroxide-[Mn2L2O3][PF6]2 (L=1,4,7-trimethyl-1,4,7-triazacyclononane)-carboxylic acid’. Part 10: Co-catalytic effect of different carboxylic acids in the oxidation of cyclohexane, cyclohexanol, and acetone

Hydrogen peroxide oxidation of cyclohexane in acetonitrile solution catalyzed by the dinuclear manganese(IV) complex [LMn(O)₃MnL](PF₆)₂ (L=1,4,7-trimethyl-1,4,7-triazacyclononane, TMTACN) at 25 °C in the presence of a carboxylic acid affords cyclohexyl hydroperoxide as well as cyclohexanone and cyclohexanol. A kinetic study of the reactions with participation of three acids (acetic acid, oxalic acid, and pyrazine-2,3-dicarboxylic acid, 2,3-PDCA) led to the following general scheme. In the first stage, the catalyst precursor forms an adduct. The equilibrium constants K₁ calculated for acetic acid, oxalic acid, and 2,3-PDCA were 127±8, (7±2)×10⁴, and 1250±50 M⁻¹, respectively. The same kinetic scheme was applied for the cyclohexanol oxidation catalyzed by the complex in the presence of oxalic acid. The oxidation of cyclohexane in water solution using oxalic acid as a co-catalyst gave cyclohexanol and cyclohexanone, which were rapidly transformed into a mixture of over-oxidation products. In the oxidation of cyclohexanol to cyclohexanone, varying the concentrations of the reactants and the reaction time we were able to find optimal conditions and to obtain the cyclohexanone in 94% yield based on the starting cyclohexanol. Oxidation of acetone to acetic acid by the system containing oxalic acid was also studied.     

Highly efficient oxidation of alcohols by the system "hydrogen peroxide-[lmn(o)3mnl](pf6)2 (l = 1,4,7-trimethyl-1,4,7-triazacyclononane)-oxalic acid"

Summary The dinuclear manganese(IV) complex [LMn(O)₃MnL](PF₆)₂ (1, L = 1,4,7-trimethyl-1,4,7-triazacyclononane) catalyzes the extremely efficient oxidation of alcohols with hydrogen peroxide at room temperature. Oxalic acid is an obligatory co-catalyst. The oxidation of isopropanol, for example, yields acetone with turnover numbers up to 40000 after 5-10 h in the absence of a solvent. 2-Cyanoethanol was oxidized by this system with somewhat lower efficiency (conversion 70%). The catalytically active cation from salt 1 was obtained in an insoluble form containing a heteropoly anion [Mn₂O₃(TMTACN)₂]₂[SiW₁₂O₄₀]. Oxidation of 2-cyanoethanol using this heterogenized catalyst and oxalic acid gave the oxo-products with the 54% total yield.     

Carvone epoxidation by system “hydrogen peroxide-[Mn2L2O3][PF6]2 (L = 1,4,7-trimethyl-1,4,7-triazacyclononane)-carboxylic acid”: a combinatorial approach to the process optimization?

Summary Epoxidation of natural terpene (+)-carvone by the system consisting of a catalyst, oxalic acid (co-catalyst) and H₂O₂ (70% aqueous solution; oxidant) was studied and factorial design methods were applied for the optimization of this reaction. A dinuclear manganese(IV) complex [LMn(O)₃MnL](PF₆)₂ (L = 1,4,7-trimethyl-1,4,7-triazacyclononane) was used as a catalyst, and acetonitrile was employed as a solvent. An analysis by methods of the complete 2⁴ factorial design showed that an increase in the catalyst concentration gives a strong positive effect on the carvone conversion and selectivity. Hydrogen peroxide has a smaller positive effect on the conversion, but at high concentration, H₂O₂ leads to some decrease in the selectivity. An increase in the oxalic acid concentration has a beneficial effect on the conversion, but does not affect the selectivity.     

Formation and reaction of O=MnV species in the oxidation of phenolic substrates with H2O2 catalysed by the dinuclear manganese(IV) 1,4,7-trimethyl-1,4,7-triazacyclononane complex [MnIV2(mu-O)3(TMTACN)2](PF6)2

The oxidation of phenolic substrates with H2O2 catalysed by [MnIV2(mu-O)3(TMTACN)2](PF6)2 1, (TMTACN, 1,4,7-trimethyl-1,4,7-triazacyclononane) has been investigated by use of ESI mass spectrometry. The role of the phenols as one-electron reductants and as co-ligands in the stabilisation and reaction of an intermediate O=MnV species has been analysed and the presence of a variety of manganese species in solution has been explained. Our results lead to a proposed mechanism for the catalytic oxidation of phenols in this system.     

Synthesis, spectroscopic and thermal investigations of solid charge-transfer complexes of 1,4,7-trimethyl-1,4,7-triazacyclononane and the acceptors iodine, TCNE, TCNQ and chloranil

The solid charge-transfer complexes formed in the reaction of the electron donor 1,4,7-trimethyl-1,4,7-triazacyclononane (TMTACN) with the acceptors iodine, tetracyanoethylene (TCNE) and 7,7,8,8-tetracyanoquinodimethane (TCNQ) have been isolated. These were characterized through electronic and infrared spectra as well as thermal and elemental analysis. The results show that the formed solid CT-complexes have the formulas [(TMTACN)I]I3, [(TMTACN)(TCNE)5] and [(TMTACN)(TCNQ)3] in full agreement with the known reaction stoichiometries in solution. The chloranil CT-solid complex cannot be isolated in pure form.     

Hydrocarbon oxygenation with Oxone catalyzed by complex [Mn2L2O3]2+ (L=1,4,7-trimethyl-1,4,7-triazacyclononane) and oxalic acid

Oxone (peroxysulphate) very efficiently oxidizes benzene to p-quinone (TON 1140) and alkanes to the corresponding alcohols and ketones (aldehydes) in aqueous acetonitrile 50 °C if catalytic amounts of complex [Mn₂L₂O₃]²⁺ (L=1,4,7-trimethyl-1,4,7-triazacyclononane) and oxalic acid are present in the solution. In contrast to the similar reaction with H₂O₂, the alkane oxidation with Oxone does not afford the corresponding alkyl hydroperoxides. Phenol was quantitatively oxidized to a mixture of p-quinone and pyrocatechol (9:1 ratio). Cyclohexanol gave cyclohexanone (TON 400). The proposed mechanism includes the formation of an oxidizing species containing the Mn(V)O fragment. A kinetic study demonstrated that an adduct of [Mn₂L₂O₃]²⁺ and oxalic acid is formed in the initial stage. This adduct reacts with Oxone to generate the oxidizing species.     

Oxidations by the system “hydrogen peroxide-[Mn2L2O3][PF6]2 (L = 1,4,7-trimethyl-1,4,7-triazacyclononane)-oxalic acid”. Part 6. Oxidation of methane and other alkanes and olefins in water

Oxidation of alkanes with hydrogen peroxide in water solution at 10-50 °C is efficiently catalyzed by the cationic dinuclear manganese (IV) derivative [Mn₂L₂O₃]²⁺ (1, with L = 1,4,7-trimethyl-1,4,7-triazacyclononane, TMTACN) in the form of the hexafluorophosphate salt ([1][PF₆]₂) if oxalic acid is present as a co-catalyst. Methane gives methanol and formaldehyde (turnover numbers, TONs, were 7 and 2, respectively, after reduction of the reaction mixture with ascorbic acid) whereas cyclohexane was oxidized with TONs up to 160 affording cyclohexyl hydroperoxide, cyclohexanone and cyclohexanol (the ketone was the main product, although at room temperature almost pure alkyl hydroperoxide was formed). In contrast to the oxidation in acetonitrile, the reaction with linear n-alkanes in water exhibits an unusual distribution of oxygenates. For example, in the oxidation of n-heptane the normalized reactivity of the methylene group in position 4 of the chain is 3-7 times higher than that of the CH₂ group in position 2. Dec-1-ene is epoxidized by hydrogen peroxide in water (a biphasic system) catalyzed by [1][PF₆]₂ and oxalic acid in the presence of a small amount of acetonitrile with TONs up to 1000 (no epoxidation has been detected in the absence of MeCN).     

Proton affinities and relative basicities of two 1,4,7-triazacyclononanes, Me3TACN and TP-TACN. Quantum-chemical ab initio calculations, solution measurements, and the structure of [TP-TACN·2H] in the solid state

Quantum-chemical ab initio calculations have been carried out to determine the proton affinities of tripyrollidinyl- and 1,4,7-trimethyl-1,4,7-triazacyclononane. Due to an effective stabilization of the ammonium cations the proton affinities of both compounds have been found to be up to 20 kcal/mol higher than the values of non-cyclic tertiary aliphatic amines. The computational results have been compared to those from solution measurements and X-ray structure determination.     

N-monofunctionalized 1,4,7-triazacyclononane macrocycles as building blocks in inorganic crystal engineering

The syntheses of N-(3-prop-1-ene)-1,4,7-triazacyclononane molybdenum tricarbonyl (2), N-(4-but-1-ene)-1,4,7-triazacyclononane molybdenum tricarbonyl (3), N-(3-prop-1-ene)-1,4,7-triazacyclononane molybdenum trioxide (5), N-(4-but-1-ene)-1,4,7-triazacyclononane molybdenum trioxide (6), N-(hydroxyethyl)-1,4,7-triazacyclononane molybdenum trioxide (7), and N-(2-methylpyridyl)-1,4,7-triazacyclononane molybdenum trioxide (8) have been achieved. The objective of this work is to systematically vary the functionality of the pendant group in order to create different crystal packing in the solid state. This is evidenced in comparing the structures of 1,4,7-triazacyclononane molybdenum trioxide (4) and 5-8, which were determined using X-ray crystallography. The synthesis and characterization of the new ligand N-(2-methylpyridyl)-1,4,7-triazacyclononane (L5) is reported.     

Investigation of macrocyclisation routes to 1,4,7-triazacyclononanes: efficient syntheses from 1,2-ditosylamides

Two routes to the synthesis of a cyclohexyl-fused 1,4,7-triazacyclononane involving macrocyclisations of tosamides have been investigated. In the first approach, using a classic Richman-Atkins-type cyclisation of a cyclohexyl-substituted 1,4,7-tritosamide with ethylene glycol ditosylate, afforded the cyclohexyl-fused 1,4,7-triazacyclononane in 5.86% overall yield in four steps. The second, more concise, approach involving the macrocyclisation of trans-cyclohexane-1,2-ditosamide with the tritosyl derivative of diethanolamine initially gave poor yields (< 25%). The well-documented problems with efficiencies in macrocyclisations using 1,2-ditosamides led to the use of a wider range of 1,2-ditosamides including ethane-1,2-ditosamide and propane-1,2-ditosamide. These extended studies led to the development of an efficient macrocyclisation protocol using lithium hydride. This new method afforded 1,4,7-tritosyl-1,4,7-triazacyclononanes in good yield (57-90%) from 1,2-ditosamides in a single step. These efficient methods were then applied to the preparation of a chiral cyclohexyl-fused 1,4,7-tritosyl-1,4,7-triazacyclononane (65-70%). This key chiral intermediate was then converted into a copper(ii) complex following detosylation and N-methylation. The resulting chiral copper(ii) complex catalysed the aziridination of styrene but it did so in a racemic fashion.     

Spectroscopic investigation of the charge-transfer interactions between 1,4,7-trimethyl-1,4,7-triazacyclononane and the acceptors iodine, TCNE, TCNQ and chloranil

The interaction of the interesting polynitrogen cyclic base 1,4,7-trimethyl-1,4,7-triazacyclononane (TMTACN) with the sigma-acceptor iodine and pi-acceptors tetracyanoethylene (TCNE), 7,7,8,8-tetracyanoquinodimethane (TCNQ) and tetrachloro-p-benzoquinone (chloranil) have been studied spectrophotometrically and cyclic voltametrically in chloroform at 20 degrees C. Based on the obtained data, the formed charge-transfer complexes were formulated as [(TMTACN)I](+).I(3)(-), [(TMTACN)(TCNE)(5)], [(TMTACN)(TCNQ)(3)] and [(TMTACN)(chloranil)(3)] where the stoichiometry of the reactions, donor:acceptor molar ratios, were shown to equal 1:2 for iodine complex, 1:3 for chloranil and TCNQ complexes and 1:5 for TCNE complex.     

Sulfide oxygenation by tert-butyl hydroperoxide with mononuclear (Me3TACN)Mn catalysts

Mononuclear (Me₃TACN)MnX₃ compounds, where X is Cl⁻, Br⁻, or N₃⁻, and Me₃TACN is 1,4,7-N,N′,N″-trimethyl-1,4,7-triazacyclononane, have been tested for catalyzing both sulfide oxygenation and styrene epoxidation by tert-butyl hydroperoxide (TBHP) and display turnover frequencies (TOF) up to 200 h⁻¹ at room temperature. Sulfoxides or sulfones may be produced selectively by varying reaction conditions. Product distribution from the oxygenation reactions of ethyl phenyl sulfide, 2-chloroethyl phenyl sulfide, and styrene is consistent with a mechanism involving an early single-electron transfer (SET) step.     

Dinuclear manganese complexes containing chiral 1,4,7-triazacyclononane-derived ligands and their catalytic potential for the oxidation of olefins, alkanes, and alcohols

Five new 1,4,7-triazacyclononane-derived compounds, sodium 3-(4,7-dimethyl-1,4,7-triazacyclononan-1-yl)propionate (Na[LMe2R']) as well as the enantiopure derivatives (S)-1-(2-methylbutyl)-4,7-dimethyl-1,4,7-triazacyclononane (S-LMe2R'), SS-trans-2,5,8-trimethyl-2,5,8-triazabicyclo[7.4.01,9]tridecane (SS-LBMe3), (S)-1-(2-hydroxypropyl)-4,7-dimethyl-1,4,7-triazacyclononane (S-LMe2R), and (R)-1-(2-hydroxypropyl)-4,7-dimethyl-1,4,7-triazacyclononane (R-LMe2R), have been synthesized. Reaction of manganese dichloride with the chiral macrocycles S-LMe2R and R-LMe2R in aqueous ethanol gives, upon oxidation with hydrogen peroxide, the brown dinuclear Mn(III)-Mn(IV) complexes which are enantiomers, [Mn2(S-LMe2R)2(mu-O)2]3+ (S,S-1) and [Mn2(R-LMe2R)2(mu-O)2]3+ (R,R-1). The single-crystal X-ray structure analyses of [S,S-1][PF6]3.0.5(CH3)2CO and [R,R-1][PF6]3.0.5(CH3)2CO show both enantiomers to contain Mn(III) and Mn(IV) centers, each of which being coordinated to three nitrogen atoms of a triazacyclononane ligand and each of which being bridged by two oxo and by two chiral hydroxypropyl pendent arms of the macrocycle. The enantiomeric complexes S,S-1 and R,R-1 were found to catalyze the oxidation of olefins, alkanes, and alcohols with hydrogen peroxide. In the epoxidation of indene the enantiomeric excess values attain 13%. The bond selectivities of the oxidation of linear and branched alkanes suggest the crucial step in this process to be the attack of a sterically hindered high-valent manganese-oxo species on the C-H bond.     

Azo dye oxidation with hydrogen peroxide catalysed by manganese 1,4,7-triazacyclononane complexes in aqueous solution

A kinetic and mechanistic study is reported of the oxidation of a number of azonaphthol dyes with hydrogen peroxide in aqueous solution, catalysed by some mono and dinuclear manganese(IV) complexes of 1,4,7-trimethyl-1,4,7-triazacyclononane (Me3TACN). The results of UV-Vis investigations, augmented by EPR and ESI-MS studies, are described for a series of experiments in which concentrations, pH and ionic strength have been varied. The reactions are characterised by an induction period followed by a relatively rapid oxidation. For the dinuclear manganese complex 2, these are consistent with an initial perhydrolysis of the manganese complex involving both the dye anion and HO2-, to give mononuclear manganese species and the operation of a catalytic cycle incorporating MnIIIL(OH)3, O = MnVL(OH)2 and MnIVL(OH)3 (L = Me3TACN) (cf. the reactions of peroxidase enzymes). ESI-MS results provide evidence for the formation and reaction (with the dye) of MnIVL(OH)3. With the mononuclear manganese complex MnIVL(OMe)3, there is a short lag-phase attributed to perhydrolysis by HO2- followed by the same catalytic cycle.     

[(R)-2-Methyl-1,4,7-triazacyclononane] [1,1,1-tris(aminomethyl)ethane]-cobalt(III) and some Mono[(R)-2-methyl-1,4,7-triazacyclononane]-cobalt(III) Complexes

Summary [(R)-2-Methyl-1,4,7-triazacyclononane][1,1,1-tris(aminomethyl)ethane]cobalt(III) has been prepared and separated into two isomers which show weak Cotton effects in the¹A₁¹T₁ region (d-electron transition) compared with that of bis[(R)-2-methyl-1,4,7-triazacyclononane]cobalt(III). The effect is comparable to that of tetraammine[(R)-1,2-diamino propane]cobalt(III). The circular dichroism spectra of the mono complex change markedly upon addition of sodium sulphate. The chelate rings are more flexible in the mono than in the bis complex. Some other related mono[(R)-2-methyl 1,4,7-triazacyclononane]cobalt(III) and [(R)-2-methyl-1,4,7 triazacyclononane][1,1,1-tris(aminomethyl)ethaneI nickel (II) complexes have also been prepared and characterized.     

The complexing properties of 1,4,7-tris(dihydroxyphosphorylmethyl)-1,4,7-triazacyclononane

The complexation of 1,4,7-tris(dihydroxyphosphorylmethyl)-1,4,7-triazacyclononane with metal ions, differing in both charge and ionic radius, was studied. This complexing agent is selective relative to cations of a given ionic radius. The stability of the complex increases with increasing charge and polarizability of the cation.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 917–919, April, 1990.     

Synthesis and DNA cleavage activity of artificial receptor 1,4,7-triazacyclononane containing guanidinoethyl and hydroxyethyl side arms

A novel phosphodiester receptor 1-(2-guanidinoethyl)-4-(2-hydroxyethyl)-1,4,7-triazacyclononane hydrochloride 1 was synthesized. DNA cleavage efficiency of 1 exhibits remarkable increases compared with its ZnII complex and corresponding nonguanidinium compound N-(2-hydroxyethyl)-1,4,7-triazacyclononane and parent 1,4,7-triazacyclononane. Kinetic data of DNA cleavage promoted by 1 fit to a Michaelis-Menten-type equation with kmax of 0.160 h-1 giving 107-fold rate acceleration over uncatalyzed DNA. The acceleration is driven by the spatial proximity of the nucleophilic hydroxyl group and the electrophilic activation for the phosphodiester by the guanidinium group.