Synthesis and stereochemical studies of 1- and 2-phenyl-substituted 1,3-oxazino[4,3-a]isoquinoline derivatives

Starting from the 1′- or 2′-phenyl-substituted 1-(2′-hydroxyethyl)-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline diastereomers 3 and 6, 4-unsubstituted and 4-(p-nitrophenyl)- and 4-oxo-substituted 1-phenyl- and 2-phenyl-9,10-dimethoxy-2H,4H-1,6,7,11b-tetrahydro-1,3-oxazino[4,3-a]isoquinolines (7-12) were prepared. The relative configurations and the predominant conformations of the products were determined by NMR spectroscopy, by quantum chemical calculations and, for (2R^∗,4S^∗,11bR^∗)-9,10-dimethoxy-4-(p-nitrophenyl)-2-phenyl-2H,4H-1,6,7,11b-tetrahydro-1,3-oxazino[4,3-a]isoquinoline (11), by X-ray diffraction.     

Exceptional isolation of both imine and enamine desmotropes of 4,1-benzothiazepines

The desmotropy of differently substituted (R∗)-3-ethoxycarbonyl-2-aryl-3,5-dihydro-4,1-benzothiazepines and 3-ethoxycarbonyl-2-aryl-1,5-dihydro-4,1-benzothiazepines was investigated. The target 4,1-benzothiazepines were obtained via the ring transformation of (2R∗,2aS∗)-2-chloro-2a-aryl-2,2a-dihydro-2H,4H-azeto[1,2-a][3,1]benzothiazin-1-ones with sodium ethoxide in ethanol. The β-amino ester intermediate of the ring-enlargement reaction was isolated. Surprisingly, the desmotropes obtained could be separated by column chromatography and proved to be unexpectedly stable in solution. Further comparative studies revealed the existence of only the enamine forms of regioisomeric 2-ethoxycarbonyl-3-aryl-4,5-dihydro-7,8-dimethoxy-1,4-benzothiazepine derivatives; in this case, no desmotropy occurred. The structures were proved by means of NMR and IR spectroscopy.     

Regio- and stereoselective cycloadditions of (1Z,4R,5R)-1-arylmethylidene-4-benzoylamino-3-oxo-5-phenylpyrazolidin-1-ium-2-ides to methyl methacrylate

[3+2] Cycloadditions of (1Z,4R^∗,5R^∗)-1-arylmethylidene-4-benzoylamino-3-oxo-5-phenylpyrazolidin-1-ium-2-ides 1a-e to methyl methacrylate gave the 1-CO₂Me regioisomers 3/3′, exclusively, in 1-67% yields. Stereocontrol was dependent on the ortho-substituents at the 1′-aryl group in dipole 1: ortho-unsubstituted dipoles 1a-c gave the major (1R^∗,3R^∗,5R^∗,6R^∗)-isomers 3a-c, whilst ortho-disubstituted dipoles gave the major (1R^∗,3S^∗,5R^∗,6R^∗)-isomers 3′d,e. The structures of cycloadducts were determined by NMR and X-ray diffraction.     

A mechanistic study on the intramolecular ionic Diels-Alder reaction of 2-methyl-3,9,11-tridecatriene-2-ol and 2,11-dimethyl-1,3,9,11-dodecatetraene

Intramolecular ionic Diels-Alder reaction of 2-methyl-3,9,11-tridecatriene-2-ol (1) was studied under acidic conditions. Treatment of 2-methyl-3,9,11-tridecatriene-2-ol (1) with trifluoromethanesulfonic acid yielded 7-methyl-8-isopropenyl-1,2,3,4,4aR^∗,7R^∗,8R^∗,8aS^∗-octahydronaphthalene (4) and (1Z)-1-((E)-but-2-enylidene)-2-(2-methylpropenyl)cyclohexane (5) through regioselective intramolecular ionic Diels-Alder reaction. The reaction appeared to proceed partly through a stepwise mechanism involving a carbocation intermediate. However, a concerted pathway rather than a stepwise one is suggested to be involved in the acid-catalyzed intramolecular Diels-Alder reaction of 2,11-dimethyl-1,3,9,11-dodecatetraene (13).     

Unexpected cleavage of the N-N bond in the reactions of 3-pyrazolidinone-1-azomethine imines with HCN

Treatment of (1Z,4R^∗,5R^∗)-1-arylmethylidene-4-benzamido-5-phenylpyrazolidin-3-one 1-azomethine imines 4a-d with potassium cyanide in the presence of acetic acid resulted in addition of HCN to the exocyclic CN double bond followed by β-eliminative N-N single bond cleavage (ring opening) to give the N-[(1R^∗,2R^∗)-3-amino-2-benzamido-3-oxo-1-phenylpropyl]benzimidoyl cyanides 6a-d in 28-85% yields. Reaction of dipole 4e with HCN furnished stable intermediate, (1′S^∗,4R^∗,5R^∗)-4-benzamido-1-[cyano(mesityl)methyl]-5-phenylpyrazolidin-3-one (5e), in 76% yield. The structure of compound 6c was determined by X-ray diffraction.     

Total synthesis of (±)-luminacin D

A 15-step synthesis of (±)-luminacin D from ethyl pent-2-ynoate is reported. The pivotal step involves the formation of the central C-2′/C-3′ bond of the natural product by condensation of the titanium enolate derived from aromatic ketone 1 with aldehyde 2a. A remote asymmetric centre in aldehyde 2a exerts control over the stereochemical course of this reaction, with the major adduct (3a, 54% yield) possessing the required (2′S^∗,3′R^∗,5′R^∗)-stereochemistry. This assignment was unambiguously established by X-ray crystallography of late stage synthetic intermediate, 17. Further manipulation of 3a (six steps) yielded synthetic (±)-luminacin D spectroscopically identical to material isolated from Streptomyces sp. Mer-VD1207 by Naruse et al.     

The intramolecular aromatic nucleophilic substitution as a route to tricyclic β-lactams. Synthesis of the novel 4-oxa-7-azabicyclo[4.2.0]octane skeleton

Sodium borohydride-carbonyl reduction of the novel 3-(2-fluoro-5-nitro) phenyl-4-benzoyl-2-azetidinones 3 and 7 gave quantitatively the stereoisomeric carbinols (4R^∗,5S^∗)-4 and (4R^∗,5R^∗)-5. Treatment of the latter with sodium hydride gave the title compounds 8 and 9, respectively, with good overall yield. The rationale of the stereochemical relationships outlined in the sequences 3 (or 7)→4→8 and 3 (or 7)→5→9 is given according to the conformational and keto-enol equilibria of the reactant(s).     

The acid-mediated intramolecular 1,3-dipolar cycloaddition of derived 2-nitro-1,1-ethenediamines for the synthesis of novel fused bicyclic isoxazoles

The discovery of a novel synthesis of new fused bicyclic isoxazoles, for example, N-methyl-3-phenyl-5,6-dihydro-4H-isoxazolo[3,4-c]azepin-8-amine (2a), N-methyl-3-phenyl-4,5-dihydroisoxazolo[3,4-c]pyridin-7-amine (2b) and N-methyl-3-phenyl-4H-pyrrolo[3,4-c]isoxazol-6-amine (2d) in high yield is reported. We speculate that the reaction proceeds via acid-mediated intramolecular 1,3-dipolar cycloaddition from 2-nitro-1,1-ethenediamines 1a,b,d.     

Formation of 5-phenyl-1,2-dithiole-3-thione from molybdenum dithiopropiolato complexes

Molybdenum dithiopropiolato complexes, [(η⁵-C₅R₄R^′)Mo(CO)₂(η²-S₂CCCPh)] (R=H, R^′=Me 1a, R=R^′=H 1b; R=R^′=Me 1c) react with trimethylamine-N-oxide (TMNO · 2H₂O) under mild thermolysis to form 5-phenyl-1,2-dithiole-3-thione (2). The reaction proceeds through the formation of the oxo-complexes, [(η⁵-C₅R₄R^′)Mo(O)(η³-S₂CCCPh)] (R=H, R^′=Me 3a, R=R^′=H 3b; R=R^′=Me 3c). Direct reaction of 3a-c with TMNO · 2H₂O under thermolysis also results in formation of 2.     

Palladium(II)-allyl complexes containing chiral N-donor ferrocenyl ligands

A study of the reactivity of enantiopure ferrocenylimine (S_C)-[FcCHN-CH(Me)(Ph)] {Fc =  (η⁵-C₅H₅)Fe{(η⁵-C₅H₄)-} (1a) with palladium(II)-allyl complexes [Pd(η³-1R¹,3R²-C₃H₃)(μ-Cl)]₂ {R¹ = H and R² = H (2), Ph (3) or R¹ = R² = Ph (4)} is reported. Treatment of 1a with 2 or 3 {in a molar ratio Pd(II):1a = 1} in CH₂Cl₂ at 298 K produced [Pd(η³-3R²-C₃H₄){FcCHN-CH(Me)(Ph)}Cl] {R² = H (5a) or Ph (6a)}. When the reaction was carried out under identical experimental conditions using complex 4 as starting material no evidence for the formation of [Pd(η³-1,3-Ph₂-C₃H₃){FcCHN-CH(Me)(Ph)}Cl] (7a) was found. Additional studies on the reactivity of (S_C)-[FcCHN-CH(R³)(CH₂OH)] {R³ = Me (1b) or CHMe₂ (1c)} with complex 4 showed the importance of the bulk of the substituents on the palladium(II) allyl-complex (2-4) or on the ferrocenylimines (1) in this type of reaction. The crystal structure of 5a showed that: (a) the ferrocenylimine adopts an anti-(E) conformation and behaves as an N-donor ligand, (b) the chloride is in acis-arrangement to the nitrogen and (c) the allyl group binds to the palladium(II) in a η³-fashion. Solution NMR studies of 5a and 6a and [Pd(η³-1,3-Ph₂-C₃H₃){FcCHN-CH(Me)(CH₂OH)}Cl] (7b) revealed the coexistence of several isomers in solution. The stoichiometric reaction between 6a and sodium diethyl 2-methylmalonate reveals that the formation of the achiral linear trans-(E) isomer of Ph-CHCH-CH₂Nu (8) was preferred over the branched derivative (9). A comparative study of the potential utility of ligand 1a, complex 5a and the amine (S_C)-H₂N-CH(Me)(Ph) (11) as catalysts in the allylic alkylation of (E)-3-phenyl-2-propenyl (cinnamyl) acetate with the nucleophile diethyl 2-methylmalonate (Nu⁻) is reported.     

Enantioselective addition of methyl group to aldehydes catalyzed by titanium complex of fluorous ligand

Titanium complex of fluorous axially dissymmetric ligand ((Ra^∗)-2,2′-bis[(R^∗)-perfluoro-1H-1-hydroxyoctyl]biphenyl, ((Ra^∗)-(R^∗)₂-1)) having perfluoroheptyl carbinol moieties catalyzed enantioselective addition of a methyl group to aldehydes. Dimethylzinc prepared in situ by mixing ZnCl₂ and methyl magnesium bromide without removal of magnesium salt was more reactive for addition of methyl group than dimethylzinc without magnesium salt, and gave up to 99% ee of the products. The high fluorine content of 1 enables it to be recoverable by the selective extraction with perfluorohexane.     

Stereoselective synthesis of the obscure mealybug pheromone by hydrogenation of a tetrasubstituted alkene precursor

An improved diastereoselective synthesis of (1R^∗,2R^∗,3S^∗)-1-acetoxymethyl-2,3,4,4-tetramethylcyclopentane 1, the sex pheromone of the obscure mealybug, Pseudococcus viburni, is described. The key step was diastereoselective catalytic hydrogenation of the tetrasubstituted double bond in 2,3,4,4-tetramethyl-cyclopent-2-enone 4 to give the thermodynamically less favored cis-2,3,4,4-tetramethyl-cyclopentanone 3a.     

Highly active/selective and adjustable zirconium polymerization catalysts stabilized by aminopyridinato ligands

This paper describes a substantial enhancement of the aminopyridinato ligand stabilized early transition metal chemistry by introducing the sterically very demanding 2,6-dialkylphenyl substituted aminopyridinato ligands derived from (2,6-diisopropylphenyl)-[6-(2,6-dimethylphenyl)-pyridin-2-yl]-amine (1a-H, ApH) and (2,6-diisopropylphenyl)-[6-(2,4,6-triisopropylphenyl)-pyridin-2-yl]- amine (1b-H, Ap^∗H). The corresponding bis aminopyridinato zirconium dichloro complexes, [Ap₂ZrCl₂] (3a) and [Ap₂^∗ZrCl₂] (3b) and the dimethyl analogues, [Ap₂ZrMe₂] (4a) and [Ap₂^∗ZrMe₂] (4b) (Me = methyl) were synthesized, using standard salt metathesis routes. Single-crystal X-ray diffraction was carried out for the dichloro derivatives. Both zirconium metal centers have a distorted octahedral environment with a cis-orientation of the chloride ligands in 3a and a closer to trans-arrangement in 3b. The dimethyl derivatives are proven to be highly active ethylene polymerization catalysts after activation with [R₂N(Me)H][B(C₆F₅)₄] (R = C₁₆H₃₃-C₁₈H₃₇). During attempted co-polymerizations of α-olefins (propylene) and ethylene high activity and selectivity for ethylene and nearly no co-monomer incorporation was observed. Increasing the steric bulk of the ligand going from (2,6-dimethylphenyl) to (2,4,6-triisopropylphenyl) substituted pyridines, switches the catalyst system from producing long chain α-olefins to polymerization of ethylene in a living fashion. In contrast to the dimethyl complexes only [Ap₂^∗ZrCl₂] in the presence of MAO at elevated temperature gave decent polymerization activity. NMR investigations of the reaction of dichloro complexes with 25 equiv. of MAO or AlMe₃ at room temperature revealed, that [Ap₂ZrCl₂] decomposes under ligand transfer to aluminum and formation of [ApAlMe₂], while [Ap₂^∗ZrCl₂] remains almost unreacted under the same conditions. The aminopyridinato dimethyl aluminum complexes, [ApAlMe₂] (5a) and [Ap^∗AlMe₂] (5b) were synthesized independently and structurally characterized. The aluminum complexes 5a and b show no catalytic activity towards ethylene, when “activated” with[R₂N(Me)H][B(C₆F₅)₄].     

Synthesis and characterization of hetero-binuclear Co-Rh complexes [CpCoS2C2(B9H10)][Rh(COD)] and [CpCoSe2C2(B10H10)][Rh(COD)]

Two hetero-binuclear complexes [Cp^∗CoS₂C₂(B₉H₁₀)][Rh(COD)] (2a) and [Cp^∗CoSe₂C₂(B₁₀H₁₀)][Rh(COD)] (2b) [Cp^∗ = η⁵-pentamethylcyclopentadienyl, COD = cyclo-octa-1,5-diene (C₈H₁₂)] were synthesized by the reactions of half-sandwich complexes [Cp^∗CoE₂C₂(B₁₀H₁₀)] [E = S (1a), Se (1b)] with low valent transition metal complexes [Rh(COD)(OEt)]₂ and [Rh(COD)(OMe)]₂. Although the reaction conditions are the same, the structures of two products for dithiolato carborane and diselenolato carborane are different. The cage of the carborane in 2a was opened; However, the carborane cage in 2b was intact. Complexes 2a and 2b have been fully characterized by ¹H, ¹¹B NMR and IR spectroscopy, as well as by elemental analyses. The molecular structures of 2a and 2b have been determined by single-crystal X-ray diffraction analyses and strong metal-metal interactions between cobalt and rhodium atoms (2.6260 Å (2a) and 2.7057 Å (2b)) are existent.     

Synthesis and characterization of heterometallic Rh/Ru complexes supported by 1,2-dichalcogenolato-o-carborane ligands

The 16-electron half-sandwich complexes Cp^∗Rh[E₂C₂(B₁₀H₁₀)] (E = S, 1a; Se, 1b) react with [Ru(COD)Cl₂]_x under different conditions to give different types of heterometallic complexes. When the reactions were carried out in THF for 24 h, the binuclear Rh/Ru complexes [Cp^∗Rh(μ-Cl)₂(COD)Ru][E₂C₂(B₁₀H₁₀)] (E = S, 2a; Se, 2b) bridged by two Cl atoms and the binuclear Rh/Rh complexes (Cp^∗Rh)₂[E₂C₂(B₁₀H₁₀)] (E = S, 3a; Se, 3b) with direct Rh-Rh bond can be isolated in moderate yields. [Ru(COD)Cl₂] fragments in 2a and 2b have inserted into the Rh-E bond. If the [Ru(COD)Cl₂]_x was reacted with 1a in the presence of K₂CO₃ in methanol solution, the product [Cp^∗Rh(COD)]Ru[S₂C₂(B₁₀H₁₀]] (4a), K[(μ-Cl)(μ-OCH₃)Ru(COD)]₄ (5a) and 3a were obtained. The B(3)-H activation in complex 4a was found. However, when the reaction between 1b and [Ru(COD)Cl₂]_x was carried out in excessive NaHCO₃, the carborane cage opened products {Cp^∗Rh[S₂C₂(B₉H₁₀)]}Ru(COD) (6b), {Cp^∗Rh[S₂C₂(B₉H₉)]}Ru(COD)(OCH₃) (7b) and 3b were obtained. All complexes were fully characterized by their IR, ¹H NMR and elemental analyses. The molecular structures of 2a, 2b, 3b, 4a, 5a, and 7b have been determined by X-ray crystallography.     

An efficient microwave assisted synthesis of novel class of Rhodanine derivatives as potential HIV-1 and JSP-1 inhibitors

(Z)-5-(2-(1H-Indol-3-yl)-2-oxoethylidene)-3-phenyl-2-thioxothiazolidin-4-one (7a-q) derivatives have been synthesized by the condensation reaction of 3-phenyl-2-thioxothiazolidin-4-ones (3a-h) with suitably substituted 2-(1H-indol-3-yl)-2-oxoacetaldehyde (6a-d) under microwave condition. The thioxothiazolidine-4-ones were prepared from the corresponding aromatic amines (1a-e) and di-(carboxymethyl)-trithiocarbonyl (2). The aldehydes (6a-h) were synthesized from the corresponding acid chlorides (5a-d) using HSnBu₃.     

Effect of α-fluorination on asymmetric epoxidation of trans-olefins using α-fluorinated cyclohexanone dioxiranes

Epoxidations of trans-β-methylstyrene, trans-stilbene and trans-methyl p-methoxycinnamate using chiral dioxiranes derived from both enantiopure diastereomers of α-fluoro cyclohexanones, (2S, 5R)-3a-6a and (2R, 5R)-3e-6e are studied and compared. From ab initio calculations at the HF/6-31G^∗ level of conformational inter-conversion for (2S, 5R)-D5a and (2R, 5R)-D5e dioxiranes it was found that, due to the α-fluorine atom, conformer K1 is more stable in the case of (2S, 5R)-D5a while conformer K2 is more stable in the case of (2R, 5R)-D5e. However, in both cases, the more stable conformers, K1 and K2, undergo rapid inter-conversion. Therefore, based on slow epoxidation reactions and rapid ring inversion of six-membered ring dioxiranes the Curtin-Hammett principle holds. Conformation K2 with axial fluorine having been found to be more reactive, the inversion of configuration observed for the epoxides obtained with ketones 3e-6e (compared with ketones 3a-6a) could be rationalized from competitive reactions of K2 and K1 conformations leading to simultaneous production of both (−) and (+) epoxides in the case of ketones 3e-6e.     

Synthetic access to optically active isoflavans by using allylic substitution

A general approach to the (S)- and (R)-isoflavans was invented, and efficiency of the method was demonstrated by the synthesis of (S)-equol ((S)-3), (R)-sativan ((R)-4), and (R)-vestitol ((R)-5). The key step is the allylic substitution of (S)-6a (Ar¹=2,4-(MeO)₂C₆H₃) and (R)-6b (Ar¹=2,4-(BnO)₂C₆H₃) with copper reagents derived from CuBr·Me₂S and Ar²-MgBr (7a, Ar²=4-MeOC₆H₄; 7b, 2,4-(MeO)₂C₆H₃; 7c, 2-MOMO-4-MeOC₆H₃), furnishing anti S_N2′ products (R)-8a and (S)-8b,c with 93-97% chirality transfer in 60-75% yields. The olefinic part of the products was oxidatively cleaved and the Me and Bn groups on the Ar¹ moieties was then removed. Finally, phenol bromide 9a and phenol alcohols 9b,c underwent cyclization with K₂CO₃ and the Mitsunobu reagent to afford (S)-3 and (R)-4 and -5, respectively.     

Synthesis, photophysical and electrophosphorescent properties of mononuclear Pt(II) complexes with arylamine functionalized cyclometalating ligands

Four cyclometalated Pt(II) complexes, i.e., [(L²)PtCl] (1b), [(L³)PtCl] (1c), [(L²)PtCCC₆H₅] (2b) and [(L³)PtCCC₆H₅] (2c) (HL² = 4-[p-(N-butyl-N-phenyl)anilino]-6-phenyl-2,2′-bipyridine and HL³ = 4-[p-(N,N′-dibutyl-N′-phenyl)phenylene-diamino]-phenyl-6-phenyl-2,2′-bipyridine), have been synthesized and verified by ¹H NMR, ¹³C NMR and X-ray crystallography. Unlike previously reported complexes [(L¹)PtCl] (1a) and [(L¹)PtCCC₆H₅] (2a) (HL¹ = 4,6-diphenyl-2,2′-bipyridine), intense and continuous absorption bands in the region of 300-500 nm with strong metal-to-ligand charge transfer (¹MLCT) (dπ(Pt) → π^∗(L)) transitions (ε ∼ 2 × 10⁴ dm³ mol⁻¹ cm⁻¹) at 449-467 nm were observed in the UV-Vis absorption spectra of complexes 1b, 1c, 2b and 2c. Meanwhile, with the introduction of electron-donating arylamino groups in the ligands of 1a and 2a, complexes 1b and 2b display stronger phosphorescence in CH₂Cl₂ solutions at room temperature with bathochromically shifted emission maxima at 595 and 600 nm, relatively higher quantum yields of 0.11 and 0.26, and much longer lifetimes of 8.4 and 4.5 μs, respectively. An electrochromic film of 1b-based polymer was obtained on Pt or ITO electrode surface, which suggests an efficient oxidative polymerization behavior. An orange multilayer organic light-emitting diode with 1b as phosphorescent dopant was fabricated, achieving a maximum current efficiency of 11.3 cd A⁻¹ and a maximum external efficiency of 5.7%. The luminescent properties of complexes 1c and 2c are dependent on pH value and solvent polarity, which is attributed to the protonation of arylamino units in the C^N^N cyclometalating ligands.     

Synthesis and characterization of half-sandwich iridium complexes containing 2,6(7)-bis(4-pyridyl)-1,4,5,8-tetrathiafulvalene and ancillary ortho-carborane-1,2-dichalcogenolato ligands

The binuclear half-sandwich iridium complexes {Cp^∗IrCl₂}₂(μ-2,6(7)-bis(4-pyridyl)-1,4,5,8-tetrathiafulvalene) (3) and {Cp^∗Ir[E₂C₂(B₁₀H₁₀)]}₂(μ-2,6(7)-bis(4-pyridyl)-1,4,5,8-tetrathiafulvalene) (E = S(5a), Se(5b)) were prepared from the reaction of [Cp^∗IrCl(μ-Cl)]₂ or the “pseudo-aromatic” half-sandwich iridium complex Cp^∗Ir[E₂C₂(B₁₀H₁₀)] (E = S(4a), Se(4b)) with a tetrathiafulvalene (TTF) derivative 2,6-bis(4-pyridyl)-1,4,5,8-tetrathiafulvalene (2) at room temperature. The complexes (3, 5a and 5b) have been fully characterized by IR and NMR spectroscopy, as well as elemental analysis. And the molecular structures of 2 and 5a were established through X-ray crystallography. It is interesting that infinite tunnels are created by repeating ‘buckled bowl’ molecules of 5a.