Determination of low-molecular-weight carboxylic acids in the ambient air and vehicle emissions: a review

This review surveys analysis of airborne and vehicle emitted low-molecular-weight carboxylic acids. Attention is paid to providing a comprehensive coverage of collection techniques, sample handling, storage, extraction methods followed by a discussion of recent developments in carboxylic acid analysis using chromatographic (gas and ion chromatography) and electrophoretic (capillary electrophoresis) techniques. The occurrence and sources of carboxylic acids in the ambient air are also summarized.     

Determination of low-molecular-weight carboxylic acids in the ambient air and vehicle emissions: a review

This review surveys analysis of airborne and vehicle emitted low-molecular-weight carboxylic acids. Attention is paid to providing a comprehensive coverage of collection techniques, sample handling, storage, extraction methods followed by a discussion of recent developments in carboxylic acid analysis using chromatographic (gas and ion chromatography) and electrophoretic (capillary electrophoresis) techniques. The occurrence and sources of carboxylic acids in the ambient air are also summarized.     

Triflylpyridinium Enables Rapid and Scalable Controlled Reduction of Carboxylic Acids to Aldehydes using Pinacolborane

Building up new and efficient methods for the controlled conversion of carboxylic acids to aldehydes is important. Herein, we report a rapid, modular and scalable method for the conversion of carboxylic acids to aldehydes using pinacolborane at ambient temperature, in which a triflylpyridinium reagent is used. The conversion of carboxylic acid to intermediate acylpyridinium by triflylpyridinium is new. A binary pyridine-coordinated boronium complex is generated after reduction. The unprecedented reduction of the acylpyridinium by HBpin opens up a practically direct synthesis of aldehydes from carboxylic acids. Theoretical studies indicate that the reduction of acylpyridinium requires a lower activation free energy than that of the product aldehyde. The synthetic advantage of this protocol is further highlighted by the scalable synthesis of aldehyde via continuous flow process. Configuration retention for chiral acids are presented in those syntheses.     

Dimethylsulfoxide-iodine catalysed deprotection of allyl carboxylic esters

A convenient method for deprotection of allyl carboxylic esters has been developed by using the inexpensive and environmentally friendly reagent dimethylsulfoxide-iodine. A variety of carboxylic esters were deprotected to the carboxylic acids. This method is more efficient and operationally simple in comparison to methods using transition metal complexes.     

The first asymmetric esterification of free carboxylic acids with racemic alcohols using benzoic anhydrides and tetramisole derivatives: an application to the kinetic resolution of secondary benzylic alcohols

A variety of optically active carboxylic esters are produced by the kinetic resolution of racemic secondary benzylic alcohols using free carboxylic acids with benzoic anhydride and tetramisole derivatives. 4-Methoxybenzoic anhydride (PMBA) is the best reagent to use in producing the corresponding esters in high ee when the reaction is catalyzed by (+)-benzotetramisole (BTM); by contrast, when non-substituted benzoic anhydride is used as a coupling reagent, the resulting optically active alcohols are obtained with high selectivities. This protocol directly produces chiral carboxylic esters from free carboxylic acids and racemic secondary alcohols by utilizing the trans-acylation process to generate mixed anhydrides from acid components and benzoic anhydride derivatives under the influence of chiral catalysts.     

High-performance liquid chromatographic determination of mono-, poly- and hydroxycarboxylic acids in foods and beverages as their 2-nitrophenylhydrazides

The application of direct derivatization in conjunction with high-performance liquid chromatography (HPLC) is described for the determination of both free and total carboxylic acids in foods and beverages. The method is based on the reaction of the carboxylic acids with 2-nitrophenylhydrazine hydrochloride, without complicated isolation steps, which produces their non-volatile hydrazine derivatives. The HPLC of a series of carboxylic acid groups was performed isocratically with short retention times. The analytical results showed good recovery and reproducibility using each internal standard. Due to its excellent selectivity and sensitivity, the present method can serve as a useful tool for routine determinations of mono-, poly- and hydroxycarboxylic acids in foods and beverages.     

High-performance CE: an effective method to study lactonization of alpha2,8-linked oligosialic acid

A sensitive and efficient method using high-performance CE (HPCE) and neuraminidase hydrolysis was developed to study the lactonization and hydrolysis of alpha2,8-pentasialic acid. Eleven lactone species of pentasialic acid formed in glacial acetic acid were detected and classified into three groups based on the number of carboxylic acids: monolactones with four carboxylic acids, dilactones with three carboxylic acids, and trilactones with two carboxylic acids. These lactones eluted between the original pentamer (with five carboxylic acids) and the fully lactonized species (with one carboxylic acid) in HPCE. Eight of the isomers were identified by hydrolysis with neuraminodase. Results obtained from previous reports and from this study together reveal a general rule for predicting the subtle difference in the acidity of each carboxylic acid in oligosialic acids: the closer the carboxylic acid is to the nonreducing end, the more acidic it is. Therefore, the elution order of lactone isomers having the same number of carboxylic groups can be predicted from the position of the free carboxylic groups in pentasialic acid. We used this principle and the results of hydrolysis with neuraminidase to identify hexamer lactone isomers separated by HPCE.     

Synthesis of and tautomerism in 3-acyltetramic acids

The synthesis of 3-acyltetramic acids, the substructure of bioactive natural products, via O-acylation of tetramic acids with carboxylic acids followed by acyl migration, has been investigated. This acylation sequence is mediated by N,N'-dicyclohexylcarbodiimide (DCC) and 4-dimethylaminopyridine (DMAP) and is very sensitive to the nature of the nitrogen substituent (R(1)), the nature of the carboxylic acid (R(2)CO(2)H), and the amount of DMAP. Acylation of N-acyl tetramic acids with an alkyl carboxylic acid using 1.3 equiv of DMAP (with 1.1 equiv of DCC) unexpectedly gave the 3-acyltetramic acid directly as a result of acyl migration induced by excess amounts of DMAP. On the other hand, N-unsubstituted, N-alkyl, and N-acyl tetramic acids with alkyl and aromatic carboxylic acids gave the O-acyl tetramic acids by using only 0.1 equiv of DMAP (with 1.1 equiv of DCC); these could be further rearranged to the acyl product by treatment with excess DMAP. The tautomeric equilibrium of these 3-acyltetramic acids in solution was found to strongly depend on the nitrogen substituent group (R(1)) rather than the 3-acyl group.     

高效钴氧化物催化羧酸可控加氢制醇（英文）

羧酸选择加氢是合成醇的重要方法,廉价高效的催化体系仍然在探索中.我们利用地球上储量丰富的钴氧化物作为催化剂,通过控制催化反应过程,进而实现高选择性地催化羧酸加氢制备醇.一系列含有不同官能团的羧酸可以被选择加氢至相应的醇类化合物,反应选择性可以满足工业生产要求.通过一系列的谱学表征以及理论计算,我们证实了钴氧化物在羧酸选择加氢反应中的优选活性位点位为氧化亚钴,从而建立了催化剂与反应活性之间的构效关系,为催化剂的理性设计提供指导.首先,我们选取硬脂酸加氢反应作为模型反应,通过对地球上储量丰富的氧化镍、四氧化三铁和四氧化三钴的催化活性对比发现,四氧化三钴催化剂活性最高,在473 K,2 MPa氢气条件下,反应速率可以达到1.2 mmol/(h·g).对四氧化三钴催化剂进行不同温度的预还原处理,我们发现催化剂的活性得到显著提高,其中573 K还原的样品活性最高,反应速率可以达到7.3 mmol/(h·g),要远远高于贵金属催化剂Pd/C(0.6 mmol/(h·g))和Pt/C(1.8 mmol/(h·g)).XRD结果表明,随着还原处理温度的不断升高,催化剂由四氧化三钴变为氧化亚钴,最终变为金属态的钴.当还原温度为573 K时,催化剂的组成为单一相氧化亚钴.XPS测试结果表明,当还原温度为573 K时,样品中只含有Co~(2+)的信号峰,并且Co/O的比例为1/1,进一步证明样品是纯态的氧化亚钴.从TEM照片中可以发现,在原始的四氧化三钴样品中观察到晶面间距为0.467和0.244 nm,分别对应四氧化三钴的(111)和(311)晶面.而对于573 K还原的样品只观察到一种晶面间距(0.246 nm),对应氧化亚钴的(111)晶面.结合表征手段和硬脂酸催化加氢活性结果,我们得出氧化亚钴是573 K还原样品催化羧酸加氢反应的活性位点.理论计算结果进一步证实了这个实验结论.理论计算结果表明,在氧化亚钴(111)晶面,硬脂酸加氢转换为十八醇是非常快速和高效的,然而,对于氢解C-C键和C-O键,需要耗费更高的能量,能垒约为1.2 e V.因为硬脂酸的吸附远远强于十八醇的吸附,硬脂酸的存在会抑制十八醇氢解形成烯烃的反应,只有当硬脂酸酸完全转化为十八醇,才会发生随后的氢解反应.通过控制催化反应过程,可以实现在氧化亚钴(111)晶面高选择性催化酸加氢至醇,也就是反应控制催化过程.基于氧化亚钴在硬脂酸加氢制备十八醇上的优异催化性能,我们进一步研究了一系列含有不同官能团的羧酸化合物的催化加氢,发现氧化亚钴表现出良好的官能团容忍度,可以实现高效、广谱的酸选择加氢至醇反应.     

Evaluation of different electrolyte systems and on-line preconcentrations for the analysis of haloacetic acids by capillary zone electrophoresis

The separation of various carboxylic acids was performed on a polymethacrylate-based weakly acidic cation-exchange resin (TSKgel OApak-A) using ion-exclusion chromatography under the acidic elution conditions. When a diluted sulfuric acid solution was used as the eluent, highly sensitive conductimetric detection of carboxylic acids was achieved without increasing the background conductance of the eluent. This method was more sensitive than using benzoic acid eluent and enabled a good resolution of dicarboxylic as well as monocarboxylic acids. The addition of 5–20% methanol to the eluent considerably reduced the retention times of carboxylic acids with hydrophobic nature.     

Simple and facile method for the preparation of vinyl azides

A synthetic utility of [bis(trifluoroacetoxy)iodo]benzene on α,β-unsaturated carboxylic acid is described. This is the first example of preparation of vinyl azide using α,β-unsaturated carboxylic acids directly by using hypervalent iodine reagent. The advantage of this protocol is characterized with non-toxicity of starting material and shorter reaction times to obtain good preparative yields. The method is also useful for the preparation of acyl azides.     

Synthesis of 2-arylbenzothiazoles via direct condensation between in situ generated 2-aminothiophenol from disulfide cleavage and carboxylic acids

In this work we describe a simple and efficient general methodology for 2-arylbenzothiazole preparation employing disulfides and carboxylic acids. The reaction is promoted by tributylphosphine that acts both in disulfide bond cleavage and as activating agent for coupling with carboxylic acids. The reaction scope was studied using bis(2-aminophenyl)disulfide and different carboxylic acids with donor/withdrawing substituents, which resulted in the desired 2-arylbenzothiazole with moderate to good yields. The method was tested with success in preparation of the amyloid probe 2-(4-aminophenyl)-6-methoxybenzothiazole that employed a substituted bis(2-aminophenyl)disulfide.     

Nitrodecarboxylation and Nitrodeformylation of Some Electron-Rich Benzoic Acids and Benzaldehydes

The nitration ipso to a carboxylic or formyl group of disubstituted and trisubstituted benzoic acids and benzaldehydes using nitric acid in acetic acid is described.     

Biosensor for determination of carboxylic acids in wines based on the inhibition of sarcosine oxidase

The flow-through amperometric biosensor is presented for determination of carboxylic acids. It is based on two sensor layers that are deposited on a platinum electrode. The inner layer serves to eliminate interferences by limiting diffusion of electrochemically active substances such as ascorbic acid. This layer is electro-polymerized using an equimolar mixture of o-phenylenediamine and resorcinol. The outer layer is prepared by cross-linking the enzyme sarcosine oxidase and bovine serum albumin using glutaraldehyde. The formation of enzymatically produced hydrogen peroxide is monitored at 600 mV vs. an Ag/AgCl reference electrode. The addition of carboxylic acids causes competitive inhibition of the enzyme and a decrease in signal. The assay was optimized for determination of carboxylic acids in wine samples. Following 10-fold dilution, most samples contain 1–10 mM individual carboxylic acids and thus a 5 mM concentration of sarcosine was chosen as being optimal for competition. In case of real samples, the biosensor measures the sum of all carboxylic acids, which serves as a parameter describing the quality of wines. Results from testing several wine samples are reported.     

Dependence of band offset and open-circuit voltage on the interfacial interaction between TiO2 and carboxylated polythiophenes

The interface of planar TiO(2)/polymer photovoltaic cells was modified with two carboxylated polythiophenes having different densities of carboxylic acid groups. Both of the interface modifiers increase the photocurrent of the cells but lower the open-circuit voltage. The work function of the TiO(2), measured using a Kelvin probe, increases with increasing density of carboxylic acid groups due to the formation of interfacial dipoles pointing toward the TiO(2) surface. The formation of interfacial dipoles results in a shift in the band offset at the TiO(2)/polymer interface, which explains the decrease in the open-circuit voltage. This work demonstrates that care must be taken when using carboxylic acid side groups to attach polymers to titania surfaces in photovoltaic cells. If the density of attachment groups is just enough to attach the polymer, then the benefits of the interface modifier can be realized without substantially decreasing the open-circuit voltage.     

An effective method for the synthesis of carboxylic esters and lactones using substituted benzoic anhydrides with Lewis acid catalysts

An efficient mixed-anhydride method for the synthesis of carboxylic esters and lactones using benzoic anhydride having electron withdrawing substituent(s) is developed by the promotion of Lewis acid catalysts. In the presence of a catalytic amount of TiCl₂(ClO₄)₂, various carboxylic esters are prepared in high yields through the formation of the corresponding mixed-anhydrides from 3,5-bis(trifluoromethyl)benzoic anhydride and carboxylic acids. The combined catalyst consisting of TiCl₂(ClO₄)₂ together with chlorotrimethylsilane functions as an effective catalyst for the synthesis of carboxylic esters from free carboxylic acids and alcohols with 4-(trifluoromethyl)benzoic anhydride. Various macrolactones are prepared from the free ω-hydroxycarboxylic acids by the combined use of 4-(trifluoromethyl)benzoic anhydride and titanium(IV) catalysts together with chlorotrimethylsilane under mild reaction conditions. The lactonization of trimethylsilyl ω-(trimethylsiloxy)carboxylates using 4-(trifluoromethyl)benzoic anhydride is also promoted at room temperature in the presence of a catalytic amount of TiCl₂(ClO₄)₂. An 8-membered ring lactone, a synthetic intermediate of cephalosporolide D, is successfully synthesized according to this mixed-anhydride method using 4-(trifluoromethyl)benzoic anhydride by the promotion of a catalytic amount of Hf(OTf)₄.     

Solid-State polymerization of the binary mixture of methacrylate and liquid-crystalline compound by electron beam

Solid-state polymerization of a binary mixture of nonliquid-crystalline monomer and liquidcrystalline compound was carried out using electron beam. The monomers were benzoic acid containing 4-[ω-(meth)acryloyloxyalkyloxy] benzoic acids, in which the alkylene spacer was ethylene, hexamethylene, or undecamethylene. The conversion yield of monomer to polymer to a large extent increased with increasing content of a liquid-crystalline compound with a terminal carboxylic group, such as 4-n-alkyloxybenzoic acid, while the addition of a liquid-crystalline compound without terminal carboxylic group did not affect polymerization of the monomer. Phase diagrams of the mixture of monomer and liquid-crystalline compound were examined using cross-polarizing microscopy and differential scanning calorimetry (DSC). All mixtures of monomer and 4-n-alkyloxybenzoic acid or liquid-crystalline compound without terminal carboxylic group showed liquid-crystallinity in a broad composition range. It was concluded that liquid-crystalline compounds with terminal carboxylic acid may form hydrogen bondings with methacrylate or acrylate monomer having terminal carboxylic acid which enhance polymerizability of the mixture. The stereoregularity of polymers determined by NMR depended on increasing irradiation dose and temperature rather than the content of the added liquid-crystalline 4-n-decanoxybenzoic acid.     

Analysis of the compounds in the synthesis mixtures of hydroxy acids by a gradient programmed RP-HPLC with UV/vis and RI detectors

Summary A gradient programmed reversed phase high-performance liquid chromatographic (RP-HPLC) method is described for the quantitative determination of some aldehydes, hydroxy aldehydes, unsaturated aldehydes, hydroxy carboxylic acids, carboxylic acids, alcohols and polyols using an ultraviolet and a refractive index detector in series. The sample matrices are synthesis mixtures of hydroxy carboxylic acids. The structures of the hydroxy aldehyde intermediates are determined by¹³C NMR and the influence of sample preparation on analysis results is discussed. The limits of detection and the precision of the method are evaluated.     

Kinetic Resolution of Racemic Secondary Benzylic Alcohols by the Enantioselective Esterification Using Pyridine‐3‐carboxylic Anhydride (3‐PCA) with Chiral Acyl‐Transfer Catalysts

Pyridine‐3‐carboxylic anhydride (3‐PCA) was found to function as an efficient coupling reagent for the preparation of carboxylic esters from various carboxylic acids with alcohols under mild conditions by a simple experimental procedure. This novel condensation reagent 3‐PCA was applicable not only for the synthesis of achiral carboxylic esters catalyzed by 4‐(dimethylamino)pyridine (DMAP) but also for the production of chiral carboxylic esters by the combination of chiral nucleophilic catalyst, such as tetramisole (=2,3,5,6‐tetrahydro‐6‐phenylimidazo[2,1‐b][1,3]thiazole) derivatives. An efficient kinetic resolution of racemic benzylic alcohols with achiral carboxylic acids was achieved by using 3‐PCA in the presence of (R)‐benzotetramisole ((R)‐BTM), and a variety of optically active carboxylic esters were produced with high enantiomeric excesses by this new chiral induction system without using a tertiary amine.