Ambient-pressure hydrogenation of ketones and aldehydes by a metal-ligand bifunctional catalyst [Cp*Ir(2,2′-bpyO)(H2O)] without using base

An efficient catalytic system for hydrogenation of ketones and aldehydes using a Cp*Ir complex [Cp*Ir(2,2′-bpyO)(H₂O)] bearing a bipyridine-based functional ligand as catalyst has been developed. A wide variety of secondary and primary alcohols were synthesized by the catalyzed hydrogenation of ketones and aldehydes under facile atmospheric-pressure without a base. The catalyst also displays an excellent chemoselectivity towards other carbonyl functionalities and unsaturated motifs. This catalytic system exhibits high activity for hydrogenation of ketones and aldehydes with H₂ gas.     

Synthesis and Structures of Two Dinuclear Transition Metal Complexes and Their Catalytic Applications in Hydrogenation of Ketones

The complexes [Ni₂(L)₂]₂ · H₂O ( 1 ) and [Cu₂(L)₂(H₂O)] · 2CH₃OH ( 2 ) were prepared by reaction of the chiral Schiff base ligand N‐[(1R,2S)‐2‐hydroxy‐1,2‐diphenyl]‐acetylacetonimine (H₂L) with Ni^II and Cu^II ions, respectively, aiming to develop economically and environmentally‐friendly catalysts for the hydrogenation of ketones. They have a dinuclear skeleton with axial vacant sites. The catalytic effects of the two complexes for hydrogenation of ketones were tested using dihydrogen gas as hydrogen source. They present some catalytic effects in hydrogenation of acetophenone, which has a dependence on the temperature and base used in these reactions. However, no apparent catalytic effects were found for the two complexes in hydrogenation of 4‐nitroacetophenone and 4‐methylacetophenone. Although the catalytic conversion in these hydrogenation reactions is low, they do represent a kind of cheap and environmentally‐friendly hydrogenation catalyst.     

H+−H− Pairs in Partially Oxidized MAX Phases for Bifunctional Catalytic Conversion of Furfurals into Linear Ketones

Currently, less favorable C=O hydrogenation and weak concerted acid catalysis cause unsatisfactory catalytic performance in the upgrading of biomass-derived furfurals (i.e., furfural, 5-methyl furfural, and 5-hydroxymethyl furfural) to ketones (i.e., cyclopentanone, 2,5-hexanedione, and 1-hydroxyl-2,5-hexanedione). A series of partially oxidized MAX phase (i.e., Ti₃AlC₂, Ti₂AlC, Ti₃SiC₂) supporting Pd catalysts were fabricated, which showed high catalytic activity; Pd/Ti₃AlC₂ in particular displayed high performance for conversion of furfurals into targeted ketones. Detailed studies of the catalytic mechanism confirm that in situ hydrogen spillover generates Frustrated Lewis H⁺−H⁻ pairs, which not only act as the hydrogenation sites for selective C=O hydrogenation but also provide acid sites for ring opening. The close intimate hydrogenation and acid sites promote bifunctional catalytic reactions, substantially reducing the reported minimum reaction temperature of various furfurals by at least 30–60 °C.     

Reduced graphene oxide/iron oxide hybrid composite material as an efficient magnetically separable heterogeneous catalyst for transfer hydrogenation of ketones

Reduced graphene oxide was synthesized and functionalized with FeSO₄⋅7H₂O to form a reduced graphene oxide/iron oxide hybrid composite. The hybrid composite was extensively characterized using various techniques. Its application for transfer hydrogenation of various ketones was studied. The investigation showed that it serves as a good catalyst for transfer hydrogenation of aromatic and some aliphatic ketones resulting in excellent isolated yields (97–99%) of products. It is magnetically separable showing good reusability. The products were characterized and compared with authentic ones.     

Efficient synthesis of chiral phenethylamines: preparation, asymmetric hydrogenation, and mild deprotection of ene-trifluoroacetamides

A mild and efficient route to enantioenriched aryl alkyl amines from ketones has been developed. The first successful synthesis and asymmetric hydrogenation of ene-trifluoroamides from oximes gave highly enantioenriched trifluoroacetamides (94-98% ee). The corresponding phenethyl amides are liberated under mild conditions (K₂CO₃, MeOH/H₂O). In addition, a new application of Josiphos ligands toward the asymmetric hydrogenation of both ene-acetamides and ene-trifluoroacetamides was discovered.     

Enantioselective Hydrogenation and Transfer Hydrogenation of Bulky Ketones Catalysed by a Ruthenium Complex of a Chiral Tridentate Ligand

A study on the enantioselective hydrogenation of tertiary alkyl ketones catalysed by a novel class of tridentate–Ru complex is reported. In contrast to the extensively studied [RuCl₂(diphos)(di-primary amine)] complexes, this new class of hydrogenation catalyst smoothly reduces these less reactive bulky ketones with up to 94 % ee. The same catalyst system can also selectively reduce other potentially problematic substrates such as bulky heterocyclic ketones. Unusually for a pressure hydrogenation catalyst, similar enantioselectivity can be obtained under transfer hydrogenation conditions. The transfer hydrogenations are somewhat slower than the pressure hydrogenations, but this drawback is readily overcome, since we have discovered that a microwave accelerated transfer hydrogenation of the above ketones occurs within 20 min at about 90 °C with similar selectivity to that obtained in the pressure hydrogenation system.     

Asymmetric hydrogenation of α-β unsaturated ketones with chiral phosphinecobalt carbonyl catalysts

The hydrogenation of α-β unsaturated ketones with Co₂(CO)₆[PPh₂-Neomenthyl]₂ as catalyst gives optically active ketones with optical yields of 1.4–16%.     

Asymmetric Hydrogenation of α-Hydroxy Ketones: A Reaction Sensitive toward Electronic Effect of Substrates

以[RuCl2(benzene)]2 和 SunPhos为原料现场制备的催化剂,催化不对称氢化α-羟基酮类化合物可获得手性1, 2-二醇类化合物,ee值最高达99%。     

Preparation and structures of a series of phosphorus‐free Nickel(II) diamine complexes and their applications in hydrogenation of acetophenone

To develop economical and phosphorus‐free catalysts for hydrogenation of ketones, three new complexes, [Ni(1R,2R‐dpen)₂(H₂O)Cl]₂Cl₂· 2Et₂O (1), [Ni(1R,2R‐dpen)(phen)(CH₃OH)₂]Cl₂·2CH₃OH (2) and [Ni(1,8‐dan)₂(DMF)Cl]₂Cl₂· 3H₂O (3), and three reported compounds, [Ni(opda)(phen)Cl₂]·CH₃OH (4), [Ni(opda)₂Cl₂] (5) and [Ni(1,2‐dach)₂]Cl₂ (6), were prepared and the structures of new compounds were determined by single crystal X‐ray diffraction analysis, in which 1R,2R‐dpen, phen, 1,8‐dan, opda and 1,2‐dach denote 1R,2R‐1,2‐diphenylethylenediamine, 1,10‐phenanthroline, 1,8‐diaminonaphthalene, o‐phenylenediamine and 1,2‐diaminocyclohexane, respectively. The catalytic effects for hydrogenation of acetophenone of these compounds were tested. This revealed very poor or no catalytic effects of these complexes in transfer hydrogenation of acetophenone using isopropanol or HCOOH? NEt₃ as hydrogen source. However, they presented much better catalytic effects in ionic hydrogenation of acetophenone using H₂ gas as hydrogen source with a dependence of the catalytic effects on the base used in the hydrogenation reactions. The complexes represent a kind of green hydrogenation catalyst, although the conversion in the hydrogenation reactions is not as high as expected. Copyright © 2010 John Wiley & Sons, Ltd.     

新型联吡啶钌膦配合物在芳香酮不对称加氢反应中的应用

本文用新型联吡啶手性双膦配体合成了一系列钌-膦-二胺络合物,并将它们用于简单芳香酮的不对称加氢反应,获得良好的活性和对映选择性;考察了溶剂、底物取代基对反应的影响,异丙醇中对邻溴苯乙酮的不对称加氢可获得96% 的对映选择性。     

Efficient Ru(II)-catalyzed asymmetric hydrogenation of simple ketones with C2-symmetric planar chiral metallocenyl phosphinooxazoline ligands

C₂-symmetric metallocenyl planar phosphinooxazoline ligands (2 and 3) have been applied in the Ru(II)-catalyzed asymmetric hydrogenation of simple ketones. This type of ligands enjoys the advantages of dual reaction sites as well as larger steric hindrance than their corresponding C₁-symmetric counterparts. As a result, almost quantitative conversions and excellent enantioselectivities were obtained for a series of simple ketones. Under the optimal reaction conditions, up to 99.7% ee was obtained in many cases. It was also confirmed that hydrogen rather than reaction solvent i-PrOH is at work in the hydrogenation procedure.     

Bifunctional Rhenium Complexes for the Catalytic Transfer‐Hydrogenation Reactions of Ketones and Imines

The silyloxycyclopentadienyl hydride complexes [Re(H)(NO)(PR₃)(C₅H₄OSiMe₂tBu)] (R=iPr ( 3 a ), Cy ( 3 b )) were obtained by the reaction of [Re(H)(Br)(NO)(PR₃)₂] (R=iPr, Cy) with Li[C₅H₄OSiMe₂tBu]. The ligand–metal bifunctional rhenium catalysts [Re(H)(NO)(PR₃)(C₅H₄OH)] (R=iPr ( 5 a ), Cy ( 5 b )) were prepared from compounds 3 a and 3 b by silyl deprotection with TBAF and subsequent acidification of the intermediate salts [Re(H)(NO)(PR₃)(C₅H₄O)][NBu₄] (R=iPr ( 4 a ), Cy ( 4 b )) with NH₄Br. In nonpolar solvents, compounds 5 a and 5 b formed an equilibrium with the isomerized trans‐dihydride cyclopentadienone species [Re(H)₂(NO)(PR₃)(C₅H₄O)] ( 6 a,b ). Deuterium‐labeling studies of compounds 5 a and 5 b with D₂ and D₂O showed H/D exchange at the H_Re and H_O positions. Compounds 5 a and 5 b were active catalysts in the transfer hydrogenation reactions of ketones and imines with 2‐propanol as both the solvent and H₂ source. The mechanism of the transfer hydrogenation and isomerization reactions was supported by DFT calculations, which suggested a secondary‐coordination‐sphere mechanism for the transfer hydrogenation of ketones.     

Enantioselective synthesis of cis-α-substituted cycloalkanols and trans-cycloalkyl amines thereof

The diastereo- and enantioselective syntheses of trans-cycloalkyl amines was accomplished through a three-step sequence consisting of: (1) asymmetric transfer hydrogenation through dynamic kinetic resolution of bicyclic and monocyclic α-substituted ketones using HCO₂H/Et₃N as the hydrogen source and TsDPEN-based Ru(II) catalysts, (2) nucleophilic hydroxyl to azide substitution of the resulting cis-cycloalkanols using diphenyl phosphoryl azide under modified Mitsunobu conditions, and (3) reduction of the trans-azide intermediates with LiAlH₄ of PPh₃/H₂O to the desired targets.     

Highly efficient asymmetric transfer hydrogenation of ketones catalyzed by chiral ‘roofed’ cis-diamine-Ru(II) complex

A new type of chiral Ru(II) complex, prepared from a conformationally rigid, sterically bulky ‘roofed’ cis-diamine and [RuCl₂(benzene)]₂, functions as an efficient catalyst for the asymmetric transfer hydrogenation of a wide variety of aryl ketones, including sterically bulky ketones, when the reaction is conducted in the presence of 5HCO₂H·2NEt₃.     

Non-flammable and reusable hydrogenation of aromatic ketones in ionic liquid

A novel method of hydrogenation of aromatic ketones in the ionic liquid [BHEA][HCO₂] was developed; this method is more enhanced in terms of flammability and reusability as compared to the conventional method (H₂ and Pd/C). The reductive selectivities of aromatic and aliphatic ketones in this method were observed.     

Asymmetric Hydrogenation of Aryl Perfluoroalkyl Ketones Catalyzed by Rhodium(III) Monohydride Complexes Bearing Josiphos Ligands

The asymmetric hydrogenation of 2,2,2-trifluoroacetophenones and aryl perfluoroalkyl ketones was developed using a unique, well-defined chloride-bridged dinuclear rhodium(III) complex bearing Josiphos-type diphosphine ligands. These complexes were prepared from [RhCl(cod)]₂, Josiphos ligands, and hydrochloric acid. As catalyst precursors, they allow for the efficient and enantioselective synthesis (up to 99 % ee) of chiral secondary alcohols with perfluoroalkyl groups. This system does not require an activating base for the hydrogenation of 2,2,2-trifluoroacetophenones. Additionally, the enantioselective C=O hydrogenations of 2-phenyl-3-(haloacetyl)-indoles, a class of privileged structures in medicinal chemistry, is reported for the first time.     

Selective Hydrogenation and Hydrodeoxygenation of Aromatic Ketones to Cyclohexane Derivatives Using a Rh@SILP Catalyst

Rhodium nanoparticles immobilized on an acid‐free triphenylphosphonium‐based supported ionic liquid phase (Rh@SILP(Ph₃‐P‐NTf₂)) enabled the selective hydrogenation and hydrodeoxygenation of aromatic ketones. The flexible molecular approach used to assemble the individual catalyst components (SiO₂, ionic liquid, nanoparticles) led to outstanding catalytic properties. In particular, intimate contact between the nanoparticles and the phosphonium ionic liquid is required for the deoxygenation reactivity. The Rh@SILP(Ph₃‐P‐NTf₂) catalyst was active for the hydrodeoxygenation of benzylic ketones under mild conditions, and the product distribution for non‐benzylic ketones was controlled with high selectivity between the hydrogenated (alcohol) and hydrodeoxygenated (alkane) products by adjusting the reaction temperature. The versatile Rh@SILP(Ph₃‐P‐NTf₂) catalyst opens the way to the production of a wide range of high‐value cyclohexane derivatives by the hydrogenation and/or hydrodeoxygenation of Friedel–Crafts acylation products and lignin‐derived aromatic ketones.     

Chemoselective Electrochemical Hydrogenation of Ketones and Aldehydes with a Well-Defined Base-Metal Catalyst

Hydrogenation reactions are fundamental functional group transformations in chemical synthesis. Here, we introduce an electrochemical method for the hydrogenation of ketones and aldehydes by in situ formation of a Mn-H species. We utilise protons and electric current as surrogate for H₂ and a base-metal complex to form selectively the alcohols. The method is chemoselective for the hydrogenation of C=O bonds over C=C bonds. Mechanistic studies revealed initial 3 e⁻ reduction of the catalyst forming the steady state species [Mn₂(H₋₁L)(CO)₆]⁻. Subsequently, we assume protonation, reduction and internal proton shift forming the hydride species. Finally, the transfer of the hydride and a proton to the ketone yields the alcohol and the steady state species is regenerated via reduction. The interplay of two manganese centres and the internal proton relay represent the key features for ketone and aldehyde reduction as the respective mononuclear complex and the complex without the proton relay are barely active.     

Synthesis of new boron complexes: application to transfer hydrogenation of acetophenone derivatives

Two new boron complexes were synthesized from N‐[3‐(methylmercapto)aniline]‐3,5‐di‐tert‐butylsalicylaldimine ( LH ) with boron reagent BPh₃ or BF₃.Et₂O. These boron complexes are stable and easily soluble in protic solvents such as ethanol (C₂H₅OH) but hardly soluble in nonprotic solvents such as chloroform (CHCl₃), dichloromethane (CH₂Cl₂) and tetrahydrofuran (THF). All new boron complexes have been fully characterized by both analytical and spectroscopic methods. The catalytic activities of complexes [LBPh₂], 2 , and [LBF₂], 3 , in the transfer hydrogenation of acetophenone derivatives were tested. Stable boron complexes were found to be efficient catalysts in the transfer hydrogenation of aromatic ketones in good conversions up to 99% in the presence of iso‐PrOH/KOH. Copyright © 2011 John Wiley & Sons, Ltd.     

Bimetallic Nanoparticles in Supported Ionic Liquid Phases as Multifunctional Catalysts for the Selective Hydrodeoxygenation of Aromatic Substrates

Bimetallic iron–ruthenium nanoparticles embedded in an acidic supported ionic liquid phase (FeRu@SILP+IL‐SO₃H) act as multifunctional catalysts for the selective hydrodeoxygenation of carbonyl groups in aromatic substrates. The catalyst material is assembled systematically from molecular components to combine the acid and metal sites that allow hydrogenolysis of the C=O bonds without hydrogenation of the aromatic ring. The resulting materials possess high activity and stability for the catalytic hydrodeoxygenation of C=O groups to CH₂ units in a variety of substituted aromatic ketones and, hence, provide an effective and benign alternative to traditional Clemmensen and Wolff–Kishner reductions, which require stoichiometric reagents. The molecular design of the FeRu@SILP+IL‐SO₃H materials opens a general approach to multifunctional catalytic systems (MM′@SILP+IL‐func).