Triphenylphosphine: a catalyst for the synthesis of C-aryl furanosides from furanosyl halides

An array of C-aryl furanosides was prepared in good yields from furanosyl halides and aryl Grignard reagents in Et₂O using PPh₃ as a catalyst.     

Cyclooctatetraene made easy

Cyclooctatetraene, C₈H₈, has been made readily available from 1,5-cyclooctadiene in 65% yield without the need of using hazardous or toxic reagents by the straightforward oxidation of the intermediate [Li(tmeda)]₂C₈H₈ (3, tmeda=N,N,N′,N′-tetramethylethylenediamine) with di-tert-butylperoxide.     

Novel organomagnesium reagents in synthesis. Catalytic cyclomagnesiation of allenes in the synthesis of N-, O-, and Si-substituted 1Z,5Z-dienes

An efficient method for the synthesis of valuable N-, O-, and Si-containing 1Z,5Z-diene compounds was developed. The method comprises Cp₂TiCl₂-catalyzed homo- and cross-cyclomagnesiation of 1,2-dienes by Grignard reagents (RMgR′) to give 2,5-dialkylidenemagnesacyclopentanes in up to 96% yield. This approach was successfully used in the synthesis of 5Z,9Z-dienoic acids, precursors of acetogenins and insect pheromones.     

Stereoselective synthesis of (E)-α-aryltellurenylvinylsilanes via hydromagnesiation reaction of alkynylsilanes

(E)-α-Aryltellurenylvinylsilanes have been synthesized stereoselectively via the hydromagnesiation of alkynylsilanes, followed by the reaction with aryltellurenyl iodides. (E)-α-Aryltellurenylvinylsilanes can undergo the cross coupling reaction with Grignard reagents in the presence of Ni(PPh₃)₂Cl₂ catalyst to afford (Z)-1,2-disubstituted vinylsilanes in good yields.     

Synthesis of diaryl selenides using the in situ reagent SeCl2

Reactions of in situ prepared SeCl₂ with Grignard reagents (prepared from bromobenzene, o-tolyl bromide, 2,6-dimethyl-4-tert-butyl-1-bromobenzene, and 1-bromo-2-methylnaphthalene) and dilithiated benzamides (prepared from N-phenyl, N-cyclohexyl, and N-isopropyl benzamide) are described.     

A novel method for (Z)-stereoselective preparation of CF3-substituted enediynes and their coupling reactions

Trifluoromethylated enynyl sulfones 3 were reacted with 2-4 equiv of phenyl, n-hexyl, trimethylsilyl, or triisopropylsilyl substituted ethynyllithium reagents in THF or ether at 0 °C to give trifluoromethylated enediynes 6 (Z)-stereoselectively in 41-96% yields. The reactions of β-fluoro-β-trifluoromethylvinyl sulfone 5 with same ethynyllithium reagents (4 equiv) afforded the corresponding enediynes 6 in 41-90% yields. The cross-coupling reactions of 6 bearing TMS group with aryl iodides in the presence of Pd(PPh₃)₂Cl₂, Ag₂CO₃, and n-Bu₄NBr provided the corresponding enediynes 6 in 20-71% yields. Dimerization of (Z)-6 bearing TMS group in the presence of CuBr₂ and K₂CO₃ yielded dimer (Z,Z)-7 in good yield.     

Synthesis of the first difunctional N-fluoro perfluoroalkylsulfonylimides, CF3SO2NFSO2(CF2)nSO2NFSO2CF3

Synthesis of difunctional N,N′-difluoro perfluoroalkylsulfonamides, CF₃SO₂NFSO₂(CF₂)_nSO₂NFSO₂CF₃, where n=4, 6 is reported. A related compound with an oxygen linkage CF₃SO₂NFSO₂(CF₂)₂O(CF₂)₂SO₂NFSO₂CF₃ has also been prepared. These reagents showed good activity for electrophilic fluorination.     

Studying the reactivity of (phthalazin-1(2H)-on-2-yl)methyl trichloroacetimidate towards different C- and O-nucleophiles

A simple and efficient synthesis of phthalazin-1(2H)-one 2-substituted derivatives is achieved in very good yields via reaction of a phthalazinone-trichloroacetimidate with various C- and O-nucleophiles such as aromatic, heteroaromatic and olefinic reagents, sugars and cholesterol in CH₂Cl₂ in the presence of a catalytic amount of trimethylsilyl trifluoromethanesulfonate (TMSOTf).     

Facile access to (Z)-alkene-containing diketopiperazine mimetics utilizing organocopper-mediated anti-SN2′ reactions

Regio- and stereoselective anti-S_N2′ alkylation of γ-phosphoryloxy-α,β-unsaturated-δ-lactams with organocopper reagents allowing the preparation of N-alkylated-α,δ-substituted-β,γ-unsaturated-δ-lactams as highly functionalized diketopiperazine mimetics is presented.     

Acylation of α-(N-carbamoyl)alkylcuprates and alkyl- or aryl(halo)cuprates

α-(N-Carbamoyl)alkylcuprates [R₂CuLi·LiX or RCuXLi (X=CN, Cl)] when prepared from THF soluble CuX·2LiCl (X=Cl, CN) undergo a reliable and generally high yield reaction with aroyl, alkanoyl, and alkenoyl chlorides to provide a rapid and efficient synthesis of α-carbamoyl ketones. Cuprates prepared from acyclic, cyclic, and a functionalized carbamate can be utilized. Although yields are a function of cuprate reagent and substrate structure, nearly quantitative yields can be obtained with reagents generated from 2RLi+CuCN·2LiCl. The use of reagents generated from CuCl·2LiCl are more efficient in the α-(N-carbamoyl)alkyl ligand, although yields are slightly lower. Acylation of alkyl(chloro)cuprates generated from one equivalent of CuCl·2LiCl and organolithium or Grignard reagents provides an efficient and high yield procedure for ketone synthesis.     

An efficient and mild oxidant for the synthesis of s-tetrazines

PhI(OAc)₂ serves as a mild and effective oxidant for the synthesis of s-tetrazine derivatives—molecules of emerging significance to the field of bioorthogonal chemistry. This reagent serves as a complementary oxidant to harsher nitrous reagents. The use of PhI(OAc)₂ improves the synthesis of 5-amino-di(pyridin-2-yl)-s-tetrazine, a molecule that has been broadly used for cellular imaging and nuclear medicine. The generality of PhI(OAc)₂ as the oxidant for tetrazine synthesis is demonstrated for nine tetrazines in 75–98% yield.     

Enantioselective organocatalytic aryloxylation of aldehydes with o-quinones

An enantioselective organocatalytic inverse electron demand hetero Diels-Alder reaction of in situ generated enamines with o-quinone reagents is reported. The method, which is optimal in wet acetonitrile at ambient temperature, provides a new and direct asymmetric route to the aryl alkyl ether motif and an alternative metal-free strategy to S_N2 substitutions with phenolate nucleophiles.     

Versatile synthetic methods for the engineering of thiophene-substituted Bodipy dyes

Novel thienyl-borondiazadipyrromethene (Bodipy) dyes have been prepared using boronic acids or boronate reagents as cross-coupling mediators. A key dichloro/bromo-Bodipy starting material appears to be a useful starting material for such coupling reactions, enabling the synthesis of various symmetrically and unsymmetrically substituted thienyl-dyes. An alternative means of introducing thienyl substituents is through Knoevenagel substitution in the 3 and 5 positions of Bodipy by reaction with a formyl-functionalized thiophene derivative, resulting in systems of extended delocalization. All these Bodipy derivatives are stable and exhibit pronounced fluorescence on irradiation in the S₀→S₁ transition.     

γ-Selective allylic substitution reaction with Grignard reagents catalyzed by copper N-heterocyclic carbene complexes and its application to enantioselective synthesis

The reaction of allylic compounds with alkyl Grignard reagents in the presence of a catalytic amount of copper N-heterocyclic carbene (NHC) complexes proceeded predominantly in an S_N2′ reaction pathway to give γ-substituted product in excellent yield. The method was applied to asymmetric reaction by using optically active NHC ligands.     

Convenient synthesis of N-isobutyryl-2′-O-methyl guanosine by efficient alkylation of O-trimethylsilylethyl-3′,5′-di-tert-butylsilanediyl guanosine

We present a novel route for the synthesis of N²-isobutyryl-2′-O-methyl guanosine, introducing 3′,5′-di-tert-butylsilyl and O⁶-trimethylsilylethyl groups as efficient protections during the 2′-O-methylation step with NaH/CH₃I. These protections were then removed simultaneously in a single step with TBAF. The eight-step synthesis is easy to perform, employing convenient commercially available reagents; crude mixtures are of satisfying purity, so only three chromatography purifications were required. Title compound was obtained in 25% overall yield from guanosine.     

Microwave-assisted synthesis and reversed-phase high-performance liquid chromatographic separation of diastereomers of (R,S)-baclofen using ten chiral derivatizing reagents designed from trichloro-s-triazine

Four dichloro-s-triazine (DCT) and five monochloro-s-triazine (MCT) chiral derivatizing reagents (CDRs) were synthesized by incorporating amino acid amide moieties as chiral auxiliaries in trichloro-s-triazine and its 6-methoxy derivative, respectively. Another MCT reagent was synthesized by substitution of two chlorine atoms with two different amino acid amides in trichloro-s-triazine. These reagents were used for synthesis of diastereomers of (R,S)-baclofen under microwave irradiation (i.e. 60 s at 85% power using DCT reagents and 90 s at 85% power using MCT reagents). The diastereomers were separated on a reversed-phase C18 column using mixtures of methanol with aqueous trifluoroacetic acid (TFA) with UV detection at 230 nm. The separation behavior in terms of retention times and resolutions obtained for the two sets of diastereomers prepared with DCT and MCT reagents were compared among themselves and among the two groups. Longer retention times and better resolutions were observed with DCT reagents as compared to MCT reagents. The calibration curves were linear for both (R)- and (S)-baclofen in the concentration range 50-500 μg/ml. The average regression was 0.999 for both (R)- and (S)-baclofen. The RSD for (R)-baclofen was 0.40-0.86% for intra-day precision and 0.60-1.40% for inter-day precision and these values for (S)-baclofen were 0.52-0.75% and 0.64-1.32%, respectively. The recovery was 97.2-98.9% for (R)- and 97.0-98.9% for (S)-baclofen. The limit of detection was 1.63ng/ml and 1.52ng/ml for (R)- and (S)-baclofen, respectively.     

N-Methylimidazolium modified magnetic particles as adsorbents for solid phase extraction of genomic deoxyribonucleic acid from genetically modified soybeans

N-Methylimidazolium modified magnetic particles (MIm-MPs) were prepared and applied in the solid phase extraction of genomic deoxyribonucleic acid (DNA) from genetically modified soybeans. The adsorption of MIm-MPs for DNA mainly resulted from the strong electrostatic interaction between the positively charged MPs and the negatively charged DNA. The elution of DNA from MPs–DNA conjugates using phosphate buffer resulted from the stronger electrostatic interaction of phosphate ions with MPs than DNA. In the extraction procedure, no harmful reagents (e.g. phenol, chloroform and isopropanol, etc.) used, high yield (10.4 μg DNA per 30 mg sample) and high quality (A₂₆₀/A₂₈₀ = 1.82) of DNA can be realized. The as-prepared DNA was used as template for duplex-polymerase chain reaction (PCR) and the PCR products were analyzed by a sieving capillary electrophoresis method. Quick and high quality extraction of DNA template, and fast and high resolution detection of duplex PCR products can be realized using the developed method. No toxic reagents are used throughout the method.     

Chemistry of odorants: stereoselective synthesis of octahydronaphthalene-based perfumery Georgywood, (+,−)-1-[(1R,2S)-1,2,3,4,5,6,7,8-octahydro-1,2,8,8-tetramethylnaphthalen-2-yl]ethan-1-one

A straightforward synthesis of octahydronaphthalene-based fragrance, such as Georgywood, is described. The Lewis acid tin (IV) chloride catalyzed efficiently an original one-pot sequential cycloaddition-clyclization process by reaction of myrcene with 3-bromo-but-3-en-2-one, leading directly to the octahydronaphthalene skeleton in very good yields (85%). Then, dehydrohalogenation with DBU gave the key 2,4-dienone intermediate in excellent yield (85%). Regioselective Michael addition gave rise to the formation of the addition product as a trans/cis diastereoisomeric mixture, by reaction either with CH₃Cu·BF₃ (6:1 ratio, 70%) or (CH₃)₂CuLi/TMSCl reagents (3:1 ratio, 80%). The generation of thermodynamically more stable enolate by treatment of the diastereoisomeric mixture with sodium hydride in tetrahydrofuran in the presence of an excess of methyl iodide, allowed stereoselective introduction of the methyl group at C2, leading to the formation of Georgywood in good yield (60%), as the only diastereoisomer, with a trans stereochemistry of the two methyl groups as demonstrated by NMR experiments.     

Fourier transform infrared spectroscopy and solid-state nuclear magnetic resonance studies of octadecyl modified metal oxides obtained from different silane precursors

Octadecyl (C₁₈) modified metal oxide substrates, including titania, zirconia, hafnia, and alumina, are prepared using two types of silylating reagents, n-octadecyltrihydridosilane and n-octadecyltrichlorosilane. Fourier transform infrared (FTIR) and solid-state ²⁹Si nuclear magnetic resonance (NMR) measurements are performed to examine the cross-linking of the silanes. Solid-state ¹³C NMR spectroscopy provides information about the conformation and mobility of surface-immobilized alkyl chains. Variable temperature FTIR investigations are carried out to study the influence of the organosilane precursors and metal oxides on the conformational order of the alkyl modified systems. It is found that grafting by means of n-octadecyltrichlorosilane yields higher grafting densities than surface modification with n-octadecyltrihydridosilane. Combined pyridine adsorption and diffuse reflectance infrared Fourier transform (DRIFT) measurements are performed on the titania and hafnia substrates to evaluate potential surface heterogeneities, i.e. Lewis and Brønsted sites. Differences in the alkyl chain conformational order within the series of C₁₈ modified metal oxides are explained by the presence of island structures. The reduced C₁₈ conformational order for the samples grafted with n-octadecyltrihydridosilane is traced back to the lower grafting density which in turn points to a lower reactivity of this silylating reagent. The most striking result is the higher conformational order of the C₁₈ chains grafted in the present surface modified metal oxides when compared with silica-based systems. This finding is attributed to the lower porosity of the metal oxide supports along with more closely packed chains on the surface.     

Soluble polystyrene-based sulfoxide reagents for Swern oxidation reactions

Two new soluble polystyrene-based sulfoxide reagents are introduced. These polymeric reagents are used in Swern oxidation reactions where the resulting sulfide polymers are easily separated from the product by simple precipitation and filtration. The recovered reduced polymer reagents can be recycled by oxidation with tert-butyl hydroperoxide in the presence of acid. Attempts to use these reagents in a multi-polymer Swern oxidation reaction system were unsuccessful.