Synthesis of novel Y-type polyurethane containing azomethine moiety, as non-linear optical chromophore and their properties

3,4-Di-(2′-hydroxyethoxy)-4′-nitrobenzylidene II was prepared by condensation reaction of 3,4-dihydroxy-4′-nitrobenzylidene I with 1-chloro-2-ethanol. Monomer II was reacted with p-phenylene diisocyanate to yield polyurethane containing the non-linear optical chromophore 3,4-di-(2′-hydroxyethoxy)-4′-nitrobenzylidene. Polymer III shows thermal stability up to 300 °C in TGA thermogram. T_g value of the polymer obtained from DSC thermogram was 110 °C. The resulting polyurethane III was soluble in common organic solvents such as acetone, DMF and DMSO. The values of electro optic coefficient d₃₃ and d₃₁ of the poled polymer film were 3.15 × 10 ⁻⁷ and 1.5 × 10 ⁻⁷ esu, respectively.     

Synthesis and characterization of fluorinated ionomer p-perfluoro-[1-(2-sulfonic)ethoxy]ethylated polyacrylonitrile-styrene

Fluorinated ionomer p-perfluoro[1-(2-sulfonic)ethoxy]ethylated polyacrylonitrile-styrene (SFAS) (5) was synthesized via electron transfer reaction between polyacrylonitrile-styrene (AS) (1) and perfluoro-di[2-(2-fluorosulfonyl)ethoxy]propionyl peroxide (FAP) (2) and followed by alkali hydrolysis and acidification of p-perfluoro[1-(2-fluorosulfonyl)ethoxy]ethylated polyacrylonitrile-styrene (3). The microstructure of ionomer 5 was well characterized by FTIR and ¹⁹F NMR. Its desulfonation occurred above 197 °C was found by TGA, the degree of substitution (DS) and ion exchange capacity (IEC) determined by titration were well controlled through changing the molar ratio of 2:1. The proton exchange membranes made of ionomer 5 have water uptake from 13.4 to 135.3% and conductivity up to 10⁻² S cm⁻¹ at 25 °C.     

New water-soluble iminecalix[4]arene with a deep hydrophobic cavity

We report the synthesis of a new water-soluble iminecalix[4]arene host 4c with a deep hydrophobic cavity. The negatively charged four carboxylate functions on the top of the cavity play a major role in the recognition of charged molecular species. The ¹H NMR titration experiments revealed that host 4c binds with cationic (10-12) and neutral guests (6-9) in water with high binding constants in the order of 10⁴-10⁵ M⁻¹. Cationic guest 9 showed highest binding constant of 2.81 × 10⁵ M⁻¹ with host 4c amongst all tested guests. Selectivity over anionic guests (13-17) is established by the presence of negative charges at the top of the deep hydrophobic cavity, as guests 15 and 17 were not recognized by host 4c. Neutral pyridine derivatives with hydrophobic chains at para positions showed high binding constants of 6.02 × 10⁴-2.23 × 10⁵ M⁻¹. The data obtained for the recognition of the guests by host 4c revealed that the ionic as well as the hydrophobic-hydrophobic interactions are crucial in the molecular recognition in aqueous medium.     

Synthesis, characterization and Schlenk equilibrium studies of methylmagnesium compounds with O- and N-donor ligands - the unexpected behavior of [MgMeBr(pmdta)] (pmdta = N,N,N′,N″,N″-pentamethyldiethylenetriamine)

MgMe₂ (1) was found to react with 1,4-diazabicyclo[2.2.2]octane (dabco) in tetrahydrofuran (thf) yielding a binuclear complex [{MgMe₂(thf)}₂(μ-dabco)] (2). Furthermore, from reactions of MgMeBr with diglyme (diethylene glycol dimethyl ether), NEt₃, and tmeda (N,N,N′,N′-tetramethylethylenediamine) in etheral solvents compounds MgMeBr(L), (L = diglyme (5); NEt₃ (6); tmeda (7)) were obtained as highly air- and moisture-sensitive white powders. From a thf solution of 7 crystals of [MgMeBr(thf)(tmeda)] (8) were obtained. Reactions of MgMeBr with pmdta (N,N,N′,N″,N″-pentamethyldiethylenetriamine) in thf resulted in formation of [MgMeBr(pmdta)] (9) in nearly quantitative yield. On the other hand, the same reaction in diethyl ether gave MgMeBr(pmdta) · MgBr₂(pmdta) (10) and [{MgMe₂(pmdta)}₇{MgMeBr(pmdta)}] (11) in 24% and 2% yield, respectively, as well as [MgMe₂(pmdta)] (12) as colorless needle-like crystals in about 26% yield. The synthesized methylmagnesium compounds were characterized by microanalysis and ¹H and ¹³C NMR spectroscopy. The coordination-induced shifts of the ¹H and ¹³C nuclei of the ligands are small; the largest ones were found in the tmeda and pmdta complexes. Single-crystal X-ray diffraction analyses revealed in 2 a tetrahedral environment of the Mg atoms with a bridging dabco ligand and in 8 a trigonal-bipyramidal coordination of the Mg atom. The single-crystal X-ray diffraction analyses of [MgMe₂(pmdta)] (12) and [MgBr₂(pmdta)] (13) showed them to be monomeric with five-coordinate Mg atoms. The square-pyramidal coordination polyhedra are built up of three N and two C atoms in 12 and three N and two Br atoms in 13. The apical positions are occupied by methyl and bromo ligands, respectively. Temperature-dependent ¹H NMR spectroscopic measurements (from 27 to −80 °C) of methylmagnesium bromide complexes MgMeBr(L) (L = thf (4); diglyme (5); NEt₃ (6); tmeda (7)) in thf-d₈ solutions indicated that the deeper the temperature the more the Schlenk equilibria are shifted to the dimethylmagnesium/dibromomagnesium species. Furthermore, at −80 °C the dimethylmagnesium compounds are predominant in the solutions of Grignard compounds 4-6 whereas in the case of the tmeda complex7 the equilibrium constant was roughly estimated to be 0.25. In contrast, [MgMeBr(pmdta)] (9) in thf-d₈ revealed no dismutation into [MgMe₂(pmdta)] (12) and [MgBr₂(pmdta)] (13) even up to −100 °C. In accordance with this unexpected behavior, 1:1 mixtures of 12 and 13 were found to react in thf at room temperature yielding quantitatively the corresponding Grignard compound 9. Moreover, the structures of [MgMeBr(pmdta)] (9c), [MgMe₂(pmdta)] (12c), and [MgBr₂(pmdta)] (13c) were calculated on the DFT level of theory. The calculated structures 12c and 13c are in a good agreement with the experimentally observed structures 12 and 13. The equilibrium constant of the Schlenk equilibrium (2 9c ? 12c + 13c) was calculated to be K_gas = 2.0 × 10⁻³ (298 K) in the gas phase. Considering the solvent effects of both thf and diethyl ether using a polarized continuum model (PCM) the corresponding equilibrium constants were calculated to be K_thf = 1.2 × 10⁻³ and K_ether = 3.2 × 10⁻³ (298 K), respectively.     

Design, synthesis, and characterization of the electrochemical, nonlinear optical properties, and theoretical studies of novel thienylpyrrole azo dyes bearing benzothiazole acceptor groups

Two series of related donor-acceptor conjugated heterocyclic azo dyes based on the thienylpyrrole system, functionalized with benzothiazol-2-yl (5-6) or benzothiazol-6-yl acceptor groups (7) through an NN bridge, have been synthesized by azo coupling using 1-alkyl(aryl)thienylpyrroles (1) and benzothiazolyl diazonium salts (2-4) as coupling components. Their optical (linear and first hyperpolarizability), electrochemical, and thermal properties have been examined. Optimized ground-state molecular geometries and estimates of the lowest energy single electron vertical excitation energies in dioxane solutions were obtained using density functional theory (DFT) at the B3LYP/6-31+G(d,p) level. Hyper-Rayleigh scattering (HRS) in dioxane solutions using a fundamental wavelength of 1064 nm was employed to evaluate their second-order nonlinear optical properties. Of these systems, the benzothiazol-2-yl-diazenes 5-6 exhibit the largest first hyperpolarizabilities (β=460-660×10⁻³⁰ esu, T convention) compared to benzothiazol-6-yl-diazenes 7 (β=360-485×10⁻³⁰ esu, T convention). Good to excellent thermal stabilities were also obtained for all azo dyes (235-317 °C). This multidisciplinary study showed that modulation of the optical and electronic properties can be achieved by introduction of the benzothiazole acceptor group in the thienylpyrrole system through position 2 or 6 of the benzothiazole heterocycle.     

Multiple hydrogen-bond-induced supramolecular nanostructure from a pincer-like molecule and a [60]fullerene derivative

A new supramolecular self-assembled system between a perylene bisimide bearing diaminopyridine-substituted isophthalamide groups (PP) and a [60]fullerene containing barbituric acid moiety (C₆₀bar) through a complementary six-point hydrogen-bonding interaction was constructed. The formation of hydrogen bonding was confirmed by ¹H NMR spectra studies in CDCl₃. Fluorescence quenching experiments indicated that the fluorescence of PP was greatly quenched by the hydrogen-bonded C₆₀bar (K_sv=2.71×10⁴ M⁻¹). A steady and rapid cathodic 0.15 μA cm⁻² photocurrent response of the PP/C₆₀bar film deposited onto an ITO electrode was produced under the irradiation of 20 mW cm⁻² white light, indicating the presence of photo-induced electron transfer between PP and C₆₀bar. TEM images showed that spherical particles were fabricated by the self-assembly of PP and C₆₀bar through hydrogen-bonding interaction.     

Synthesis, properties, and oxidizing function of 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates

Uracil-annulated heteroazulenes, 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates 7a,b·BF₄⁻, which are the isoelectronic compounds of 5-dezazaflavin, were synthesized. X-Ray crystal analysis and MO calculations were carried out to clarify the structural characteristics of 7a,b·BF₄⁻. The stability of cations 7a,b is expressed by the pK_R+ values which were determined spectrophotometrically to be 10.9 and 11.2, respectively. The electrochemical reduction of 7a,b exhibited high reduction potentials at −0.84 and −0.87 (V vs Ag/AgNO₃) upon cyclic voltammetry (CV). A good linear correlation between the pK_R+ values and reduction potentials (E1_red) of 7a,b·BF₄⁻ and reference compounds 4·BF₄⁻ and 5·BF₄⁻ was obtained. In a search of the reactivity, reactions of 7a,b·BF₄⁻ with some nucleophiles, hydride and diethylamine, were carried out to clarify that the introduction of nucleophiles to give regio-isomers is dependent on the nucleophile. The photo-induced oxidation reactions of 7a,b·BF₄⁻ toward some alcohols under aerobic conditions were carried out to give the corresponding carbonyl compounds in more than 100% yield [based on compounds 7a,b·BF₄⁻], suggesting the oxidizing function of 7a,b·BF₄⁻ toward alcohols in the autorecycling process.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.     

1-D Polymeric divalent metal m-ferrocenylbenzoates: Structures, NLO and electrochemical properties

Three 1-D metal-organic polymers containing m-ferrocenylbenzoate components: {[Pb(μ₂-η²-OOCH₄C₆Fc)₂] · (CH₃OH)₂}_n (1), [Zn(OOCH₄C₆Fc)₂(bpe)]_n (2) and [Mn(η²-OOCH₄C₆Fc)₂(4,4′-bpy)]_n (3) were synthesized and structurally characterized. In polymer 1, each m-FcC₆H₄COO⁻ anion adopts a tridentate fashion, bridging the central Pb(II) ions to form a 1-D chain. Polymers 2 and 3 give similar zigzag chain structures. Their third-order NLO properties were investigated with 532 nm laser pulses of 8 ns duration by Z-scan experiment in DMF solution. All of the polymers exhibit good NLO refractive properties with self-focusing behaviors. The third-order NLO refractive indexes n₂ are 2.44 × 10⁻¹¹ esu for 1, 2.33 × 10⁻¹¹ esu for 2, and 2.10 × 10⁻¹¹ esu for 3, respectively. Through quantum chemistry calculations, we conclude that the nonlinear refractive behaviors of the three polymers mainly come of the ferrocenyl units and organic adjuvant ligands; Mn(II) ions and Pb(II) ions have also some influence on NLO properties. The solution-state differential pulse voltammetrys indicate that the half-wave potential of the ferrocenyl moiety in 3 has slightly higher value than those of 1 and 2. This may be because the HOMO orbitals in 1 and 2 are located in the m-FcC₆H₄COO⁻ groups, while in 3 the HOMO orbital is located in the m-FcC₆H₄COO⁻ and Mn(II)groups, the charge transitions of the metal cores may play an important role in the change of the Fe(II)/Fe(III) oxidation potential of 3, so the Fe(II) centers of 1 and 2 are more easily oxidized to Fe(III) centers than that of 3.     

Synthesis and characterization of N-(2-pyridyl)benzamide-based nickel complexes and their activity for ethylene oligomerization

A series of N-(2-pyridyl)benzamides (1)-(11) and their nickel complexes, [N-(2-pyridyl)benzamide]dinickel(II) di-μ-bromide dibromide (12)-(16) and (aryl)[N-(2-pyridyl)benzamido](triphenylphosphine)nickel(II) (17)-(24), were synthesized and characterized. The single-crystal X-ray analysis revealed that 12 and 14 are binuclear nickel complexes bridged by bromine atoms and each nickel atom adopts a distorted trigonal bipyramidal geometry. The key feature of the complexes 17, 19 and 23 is each has a six-membered nickel chelate ring including a deprotonated secondary nitrogen atom and an O-donor atom. The nickel complexes show moderate to high catalytic activity for ethylene oligomerization with methylaluminoxane (MAO) as cocatalyst. The activity of 12-16/MAO systems is up to 3.3 × 10⁴ g mol⁻¹ h⁻¹ whereas for 17-24/MAO systems it is up to 4.94 × 10⁵ g mol⁻¹ atm⁻¹ h⁻¹. The influence of Al/Ni molar ratio, reaction temperature, reaction period and PPh₃/Ni molar ratio on catalytic activity was investigated.     

Molecular design, synthesis and electro-optic properties of novel Y-type polyurethanes with high thermal stability of second harmonic generation

2,4-Di-2^′-hydroxyethoxy)benzylidenemalononitrile (3) was prepared and condensed with 2,4-toluenediisocyanate and 3,3^′-dimethoxy-4,4^′-biphenylenediisocyanate to yield unprecedented novel Y-type polyurethanes (4-5) containing 2,4-dioxybenzylidenemalononitrile group as a nonlinear optical (NLO) chromophore, which constitutes a part of the polymer backbone. The resulting polyurethanes 4-5 were soluble in common organic solvents such as acetone and DMF. Polymers 4-5 showed a thermal stability up to 260 °C from thermogravimetric analysis (TGA) with differential scanning calorimetry (DSC) giving T_g values around 143-156 °C. The approximate lengths of aligned NLO-chromophores estimated from AFM images of poled polymer films were about 10 nm. The SHG coefficients (d₃₃) of poled polymer films were around 7.4 × 10⁻⁹ esu. These Poled polymers exhibited a greater thermal stability of dipole alignment even at 10 °C higher than T_g, and no SHG decay was observed below 155 °C due to the partial main chain character of the polymer structure and extensive hydrogen bonds between urethane linkage, which is acceptable for NLO device applications.     

Novel titanocene anti-cancer drugs derived from fulvenes and titanium dichloride

Starting from 6-(p−N,N-dimethylanilinyl)fulvene (1a) or 6-(pentamethylphenyl)fulvene (1b) [1,2-di(cyclopentadienyl)-1,2-di(p−N,N-dimethylaminophenyl)ethanediyl] titanium dichloride (2a) and [1,2-di(cyclopentadienyl)-1,2-bis(pentamethylphenyl)ethanediyl] titanium dichloride (2b) and their corresponding dithiocyanato complexes (3a, 3b) were synthesized. Titanocene 2b did not show a cytotoxic effect, but when 2a was tested against pig kidney carcinoma cells (LLC-PK) or human ovarian carcinoma cells (A2780/cp70) inhibitory concentrations (IC₅₀) of 2.7 × 10⁻⁴ and 1.9 ×  10⁻⁴ M, respectively, were observed.     

Solid-state cis-trans isomerization reaction of (η-MeC5H4)W(CO)2P(OPr)3I

cis-(η⁵-MeC₅H₄)W(CO)₂P(OⁱPr)₃I (1) was converted to the trans isomer 2 in the solid state (90-110 °C). The reaction was monitored by heating 1 in NMR tubes for periods of time (2-60 min), cooling the tubes to room temperature and determining the conversion by solution ³¹P and ¹H NMR spectroscopy. The data were consistent with a first-order reaction and yielded an activation energy of 59 ± 3 kJ mol⁻¹. Comparative kinetic data were obtained from an in situ analysis of a powder-XRD study of 1. The powder-XRD study was conducted at 80-100 °C (10-60 min), yielding an activation energy of 52 ± 2 kJ mol⁻¹ (first-order reaction). The reaction could not be monitored by single crystal X-ray diffraction as the crystal disintegrated over time on heating. This disintegration process was monitored by optical microscopy and revealed that while the bulk crystal morphology was retained the crystal surface roughened with time. The compounds 1 and 2 were also structurally characterised by X-ray crystallographic techniques.     

Synthesis of light-emmting materials bis-[2′-2″-(9H-fluoren-2-yl)-vinyl-8-hydroxyquinoline] zinc(II) and bis-[2′-4″-(4,5-diphenyl-1H-imidazol-2-yl)styryl-8-hydroxyquinoline] zinc(II)

Two novel light-emitting materials bis-[2′-2″-(9H-fluoren-2-yl)-vinyl-8-hydroxyquinoline] zinc(II) (3) and bis-[2′-4″-(4,5-diphenyl-1H-imidazol-2-yl)styryl-8-hydroxyquinoline] zinc(II) (4) containting 8-hydroxyquinoline and fluorene or imidazole moieties have been synthesized. The optical properties of these complexes were influenced by the styryl substituents, and exhibited orange-emission. They have higher fluorescence quantum yields than Alq₃, and good stabilities with thermal decomposition temperatures 395 °C and 435 °C. The single-layer OLED fabricated by 3 emitted lemon-yellow, and exhibited good device performance with a maximum luminance of 489 cd m⁻², and luminance efficiency of up to 0.41 cd A⁻¹. The single-layer OLED fabricated by 4 emitted yellow-green, and exhibited good device performance with a maximum luminance of 323 cd m⁻², and luminance efficiency of up to 0.54 cd A⁻¹.     

Ferrocenyl D-π-A conjugated polyenes with 3-dicyanomethylidene-1-indanone and 1,3-bis(dicyanomethylidene)indane acceptor groups: Synthesis, linear and second-order nonlinear optical properties and electrochemistry

Second-order nonlinear optical chromophores incorporating the ferrocenyl group as an electron donor and 3-dicyanomethylidene-1-indanone and 1,3-bis(dicyanomethylidene)indane acceptor groups, connected by a conjugated polyenic bridge of varied length (2[n] and 3[n], respectively) have been synthesized. The electronic absorption spectra of these compounds display in the visible region bands attributable to π-π* and metal-to ligand charge transfer (MLCT) transitions. The energies of these transitions are close to those reported earlier for ferrocenyl D-π-A chromophores with the strongest acceptor groups, e.g., with the 3-dicyanomethylidene-2,3-dihydrobenzothiophene-1,1-dioxide group (1[n]) [V. Alain, M. Blanchard-Desce, C.-T. Chen, S.R. Marder, A. Fort, M. Barzoukas, Synt. Met. 81 (1996) 133]. The solid-state structure of 2[3], determined by X-ray diffraction shows a significant reduction of the bond length alternation (BLA), 0.05 Å, suggesting high first hyperpolarizability. However, a centrosymmetrical packing of molecules of this compound in the crystal excludes its second harmonic generation ability. The μβ values of 2[n] and 3[n], determined by the EFISH technique at 1907 nm are high and increase with the increasing length of the conjugated π-bridge. The highest value of μβ (8720 × 10⁻⁴⁸ esu) was determined for 3[4], which is close to that reported for 1[4] (11 200 × 10⁻⁴⁸ esu), the highest value found for a ferrocenyl D-π-A chromophore until now.     

Ring transformation of cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium ion to the corresponding pyrrole derivatives via troponeimine intermediates: photo-induced autorecycling oxidizing reactions of some amines

Ring transformation of 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]furan- 8(7H),10(9H)-dionylium tetrafluoroborate 4⁺·BF₄⁻ to 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrrole-8(7H),10(9H)-dionylium tetrafluoroborate 6a-d⁺·BF₄⁻ consists of the reaction of 4⁺·BF₄⁻ with amines and subsequent exchange of the counter-ion using aq. HBF₄. Reactions of 4⁺·BF₄⁻ with aniline and 4-substituted anilines afforded the corresponding pyrrole derivatives 6a-c⁺·BF₄⁻ directly in good yields. On the other hand, reaction of 4⁺·BF₄⁻ with benzylamine gave the troponeimine intermediate 9, which was not converted to 6d⁺·BF₄⁻ and reverted to 4⁺·BF₄⁻ by adding HBF₄; however, it was converted to 6d⁺·BF₄⁻ upon treatment with (COCl)₂ or SOCl₂, followed by exchange of the counter-ion. In a search for the characteristics of 9, inspection and comparison of the X-ray crystal analyses, NMR and UV-vis spectra, and CV measurement of 9 and N,N-disubstituted troponeimine derivatives 12 were carried out to suggest the remarkable structure of 12 having ionic C-O bonding between the imine-carbon atom and the oxygen atom of the barbituric acid moiety in the solid state. Thus, characteristics of 9 were ascribed to the sterically hindered and favorable conformation of N-protonated troponeimine intermediates. Furthermore, novel photo-induced oxidation reactions of a series of 4⁺·BF₄⁻, 5⁺·BF₄⁻, and 6a,e⁺·BF₄⁻ towards some amines under aerobic conditions were carried out to give the corresponding imines in 455-8362% yields [based on compounds 4⁺, 5⁺, and 6a,e⁺], suggesting the oxidation reaction occurs in an autorecycling process. Mechanistic aspects of the amine-oxidation reaction are also postulated.     

Design and synthesis of fluorescent 6-aryl[1,2-c]quinazolines serving as selective and sensitive ‘on-off’ chemosensor for Hg in aqueous media

Three fluorescent quinazolines thiophen-2-yl-5,6-dihydrobenzo-[4,5]imidazo[1,2-c]quinazoline (1), pyridin-3-yl-5,6-dihydrobenzo-[4,5]imidazo-[1,2-c]quinazoline (2) and phenyl-5,5′,6,6′-dihydrobenzo-[4,4′,5,5′]imidazo-[1.1′,2-c,2′-c]quinazoline (3) have been synthesized. Structures of 1 and 3 have been authenticated crystallographically. Quinazolines 1-3 exhibit highly selective ‘on-off’ switching for Hg²⁺ ions. The fluorescence intensity displayed a linear relationship with respect to Hg²⁺ concentration (0.1-1.0 μM; R² = 0.99) with detection limit of 2.0 × 10⁻⁷ M.     

Synthesis and nonlinear optical properties of novel Y-type polyimides with enhanced thermal stability of dipole alignment

2,3-Bis-(3,4-dicarboxyphenylcarboxyethoxy)-4′-nitrostilbene dianhydride (4) was prepared and reacted with 1,4-phenylenediamine, 4,4′-oxydianiline, 4,4′-diaminobenzanilide and 4,4′-(hexafluoroisopropylidene)dianiline to yield novel polyimides 5-8 containing 2,3-dioxynitrostilbenyl groups as NLO-chromophores, which constituted parts of the polymer backbones. The resulting polyimides 5-8 were soluble in polar solvents such as acetone and DMF. Polymers 5-8 showed a thermal stability up to 300 °C in TGA thermograms with T_g values obtained from DSC thermograms in the range of 135-160 °C. The SHG coefficients (d₃₃) of poled polymer films at the 1064 cm⁻¹ fundamental wavelength were around 5.26 × 10⁻⁹ esu. The dipole alignment exhibited exceptionally high thermal stability even at 30 °C higher than T_g and there was no SHG decay below 170-190 °C due to the partial main chain character of polymer structure, which was acceptable for NLO device applications.     

On- and off column enantiomerization of 4,4′-bisquinolin-2-ones: A comparison of Auto-, DHPLcy2k and DCXplorer calculated thermodynamic data generated by dynamic high,performance liquid chromatography with theoretically calculated data

Fast semipreparative HPLC enantioseparation of four axially chiral biscarbostyrils (4,4′-bisquinoline-2-ones) using ULMO as a π-acidic Pirkle type chiral stationary phase leads to two racemizing pairs (1,2; k_obs 1.6 × 10⁻⁴ and 3.0 × 10⁻⁴ s⁻¹ at 28 °C) and two stable ones (3,4). 3 was stabilized by a crown ether linkage from pos. 6 to 6′, and 4 had sterically demanding bromo substituents in pos. 3 and 3′. On-column generated temperature-dependent chromatograms of 1 and 2 were fitted with Auto-DHPLCy2k and DCXplorer. For cpd 2 both programs delivered similar ΔG values of 90 and 93 kJ/mol, well comparable with the 99 kJ/mol calculated with the B3LYP/6-31G (d) procedure. At temperatures of high conversion DCXplorer delivered inconsistent series of rate constants for the more tailing and less resolved tetramethoxy derivative 1. We connect this problem with an almost impossible halfwidth calculation of tailing peak pairs which are weakly resolved. However, this problem could be observed only in the case of tetramethoxy derivative 1. Stochastic generated data of Auto-DHPLCy2k could be used at a lower percentage of conversion only while the theoretical plate model did not deliver useful data at temperatures of very low conversion but fitted well high conversion chromatogram series of 1 and 2.     

The reaction of α-phenethyl radicals with 1,4-benzoquinone and 2,6-di-tert-butyl-1,4-benzoquinone

The absolute rate constant for 1,4-benzoquinone (BQ) irreversibly trapping α-phenethyl radicals (3) has been determined as 4.4×10⁶ M⁻¹ s⁻¹ at 43 °C using acyclic cis azoalkane 9c as a radical precursor. These reactants afford the hydroquinone mono ether 4 at 30 °C but a mixture of products at elevated temperature. 2,6-Di-tert-butyl-1,4-benzoquinone (DTBQ) also reacts with 3 but the cyclohexadienone products are thermally labile.