Molybdenum Schiff base-polyoxometalate hybrid compound: A heterogeneous catalyst for alkene epoxidation with tert-BuOOH

The hybrid compound consisting of molybdenum(salen) [salen = N,N′-bis(salicylidene)ethylnediamine] complex covalently linked to a lacunary Keggin-type polyoxometalate, K₈[SiW₁₁O₃₉] (POM), was synthesized and characterized by elemental analysis, FT-IR, ¹H NMR and diffuse reflectance UV–Vis spectroscopic methods and BET analysis. The complex, [Mo(O)₂(salen)–POM], was studied, for the first time, in the epoxidation of various alkenes with tert-BuOOH and in 1,2-dichloroethane as solvent. This catalyst can catalyze epoxidation of various olefins including non-activated terminal olefins. The effect of the other parameters such as solvent, oxidant and temperature on the epoxidation of cyclooctene was also investigated. The interesting characteristic of this catalyst is that, in addition to being a heterogeneous catalyst, it gives higher yields towards epoxidation of olefins in comparison to the corresponding homogeneous [Mo(O)₂(salen)] complex.     

The stereoselective synthesis of (E)-octafluoro-1,3,5-hexatriene and (3E,5E,7E)-dodecafluoro-1,3,5,7,9-decapentaene

(E)-(1,2-Difluoro-1,2-ethenediyl)bis[tributylstannane], 3, readily undergoes a Pd(PPh₃)₄/CuI-catalyzed cross-coupling reaction with iodotrifluoroethene to yield (E)-octafluoro-1,3,5-hexatriene, 4, in high isomeric purity. (1Z,3E,5Z)-(1,2,3,4,5,6-Hexafluoro-1,3,5-hexenetriyl)bis[tributylstannane], 7, was sequentially prepared from (1Z,3E,5Z)-(1,2,3,4,5,6-hexafluoro-1,3,5-hexenetriyl)bis[triethylsilane], 5, which was prepared via a Pd(PPh₃)₄/CuI-catalyzed cross-coupling reaction of 3 with (E)-1,2-difluoro-1-iodo-2-triethylsilylethene, 6. Pd(PPh₃)₄/CuI cross-coupling of 7 with iodotrifluoroethene gave (3E,5E,7E)-dodecafluoro-1,3,5,7,9-decapentaene, 8.     

PhI(OAc)2/KI mediated 1,2-acetoxysulfenylation of alkenes: facile synthesis of β-acetoxysulfides

A convenient method for 1,2-acetoxysulfenylation of alkenes using disulfide promoted by (diacetoxyiodo)benzene (PhI(OAc)₂, DIB)/KI was developed. The reaction is highly regioselective for styrene derivatives while aliphatic alkenes lead to a mixture of two regioisomers.     

An efficient stereoselective synthesis of (E)- and (Z)-trisubstituted alkenes from unactivated Baylis-Hillman adducts using NaBH4/CuCl2·2H2O

A convenient and facile stereoselective synthesis of (E)- and (Z)-trisubstituted alkenes has been achieved by treatment of unactivated Baylis-Hillman adducts with NaBH₄ in the presence of CuCl₂·2H₂O at room temperature for 15 min.     

Synthesis of (E)-alkenes via hydroindation of CC in InCl3-NaBH4 system

In InCl₃-NaBH₄-MeCN system, terminal aryl alkynes could couple with aryl iodides and bromides to give disubstituted alkenes via hydroindation of CC. In the similar way, (E)-alkenylsilanes were synthesized via reduction of alkynylsilanes in tetrahydrofuran (THF) in high yields. The processes showed high regio- and stereoselectivity.     

Enantioselective addition of diethylzinc to aromatic aldehydes catalyzed by C2-symmetric chiral diols

Optically pure C₂-symmetric diols have been synthesized with moderate yields in a straightforward manner, and are used as catalysts in the enantioselective alkylation of aromatic aldehydes with diethylzinc. The addition of diethylzinc to benzaldehyde and sterically hindered 1-naphthaldehyde was achieved with excellent enantioselectivities (97–99% ee) under catalysis with (1R,2R)-1,2-bis(3,5-dibromophenyl)-ethane-1,2-diol and (1R,2R)-1,2-bis(3,5-diphenylphenyl)-ethane-1,2-diol.     

A practical and efficient procedure for reduction of carboxylic acids and their derivatives: use of KBH4-MgCl2

The use of KBH₄-MgCl₂ to reduce carboxylic acids and their derivatives to the corresponding alcohols or the respective reduced products is described. Methyl (S)-3,4-O-isopropylidene-3,4-dihydroxy butanoate 2 used as a reference substrate was reduced with KBH₄ and MgCl₂ in 1:1 mol ratio to (S)-1,2-O-isopropylidene-1,2,4-butanetriol 1.     

A novel method for the synthesis of 5-substituted 1H-tetrazole from oxime and sodium azide

A simple and efficient protocol is developed for the synthesis of 5-substituted 1H-tetrazoles from various oximes and sodium azide (NaN₃) by using copper acetate as a catalyst.     

Effect of capping and particle size on Raman laser-induced degradation of γ-Fe2O3 nanoparticles

Diol capped γ-Fe₂O₃ nanoparticles are prepared from ferric nitrate by refluxing in 1,4-butanediol (9.5 nm) and 1,5-pentanediol (15 nm) and uncapped particles are prepared by refluxing in 1,2-propanediol followed by sintering the alkoxide formed. X-ray diffraction (XRD) shows that all the samples have the spinel phase. Raman spectroscopy shows that the samples prepared in 1,4-butanediol and 1,5-pentanediol and 1,2-propanediol (sintered at 573 and 673 K) are γ-Fe₂O₃ and the 773 K-sintered sample is Fe₃O₄. Raman laser studies carried out at various laser powers show that all the samples undergo laser-induced degradation to α-Fe₂O₃ at higher laser power. The capped samples are however, found more stable to degradation than the uncapped samples. The stability of γ-Fe₂O₃ sample with large particle size (15.4 nm) is more than the sample with small particle size (10.2 nm). Fe₃O₄ having a particle size of 48 nm is however less stable than the smaller γ-Fe₂O₃ nanoparticles.     

An efficient synthesis of 5-substituted 1H-tetrazoles via B(C6F5)3 catalyzed [3+2] cycloaddition of nitriles and sodium azide

A simple and efficient protocol is developed for the synthesis of 5-substituted 1H-tetrazole derivatives from various nitriles and sodium azide (NaN₃) via [3+2] cycloaddition reaction using B(C₆F₅)₃ as a catalyst. The present synthetic method displayed significant advantages such as low catalyst loading, mild reaction conditions, low toxicity, easy work-up, high yields, and compatibility with other functional groups.     

Synthesis of α,β-unsaturated dioxanes, dioxolanes and dioxepanes by trans-acetalisation of dimethylacetals with meso or C2-symmetrical 1,2-, 1,3- and 1,4-diols

Several o-dibenzylic diols were prepared reacting organometallics with o-phthalaldehyde at room temperature in ether. The identity of the meso and C₂-symmetrical (d,l) isomers as well as their ratio were determined by chiral gas chromatography. The meso and C₂ (racemic) stereoisomeric diols were easily separated by flash chromatography on silica gel. A set of 18 α,β-unsaturated acetals were then prepared reacting those, as well as commercially available 1,2, 1,3 and 1,4 diols, with the corresponding methylacetals in acidic medium. A trans-acetalisation procedure adapted to the cases of fragile allylic alcohols or unfavorable 1,6 diols-derived dioxonanes based on a Dean-Stark trapping of methanol was also employed.     

Silica supported lanthanum triflate mediated synthesis of 5-substituted-1H tetrazoles

Silica supported lanthanum triflate (Ln(OTf)₃-SiO₂) promoted synthesis of 5-substituted 1H-tetrazoles via [3+2] cycloaddition between aromatic/heteroaromatic nitriles and sodium azide is a high product yielding, facile, and straightforward procedure. Non toxicity, recovery, and reusability for three continuous cycles are the noteworthy features of the currently employed heterogeneous catalyst.     

Synthesis of chiral vicinal C2 symmetric and unsymmetric bis(sulfonamide) ligands based on trans-1,2-cyclohexanediamine by aminolysis of N-tosylaziridines

The ring opening of N-tosylaziridines with aliphatic amines can be efficiently catalyzed by lithium perchlorate to provide derivatives of the trans-1,2-diamine in high yields. The reaction was used in desymmetrization of several cyclic N-tosylaziridines using chiral amines. Using this strategy, an efficient synthesis of chiral vicinal C₂ symmetric bis(sulfonamide) and unsymmetrical bis(sulfonamide) ligands based on trans-1,2-cyclohexanediamine was developed.     

Facile generation of vicinal bromoazides from olefins using TMSN3 and TsNBr2 without any catalyst

A very rapid and efficient method has been developed for the synthesis of vicinal bromoazides directly from olefin using N,N-dibromo-p-toluenesulfonamide (TsNBr₂) without any catalyst. The reaction is extremely fast which goes into completion instantaneously to produce bromoazides. This procedure is applicable to various olefins such as cinnamates, chalcone, styrenes, and acrylate to give the corresponding 1,2-bromoazide in an excellent yield.     

An expedient synthesis of indolo[1,2-a]quinolines via Mn(OAc)3-mediated oxidative free radical cyclization and NaI/O2-assisted dealkoxycarbonylation/aerobic oxidation cascade

An expedient synthetic procedure of indolo[1,2-a]quinolines was developed using a sequential Cu-mediated N-arylation of indole, Mn(OAc)₃-mediated oxidative free radical cyclization, and NaI/O₂-assisted concomitant dealkoxycarbonylation/aerobic oxidation. The last step was replaced by a palladium-catalyzed decarboxylation/elimination protocol for the allyl ester derivatives.     

Synthesis and crystal structure of four Pd(II) complexes containing nido or closo carborane diphosphine ligands

Three Pd(II) complexes [Pd₂(μ-Cl)₂{7,8-(PPh₂)₂-7,8-C₂B₉H₁₀}₂] · 0.25CH₂Cl₂ (1), [Pd{7,8-(PPh₂)₂-7,8-C₂B₉H₁₀}₂] · 4CHCl₃ (2) and [PdCl₂(1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀)] (3) have been synthesized by the reactions of 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀ with PdCl₂ in acetonitrile, cyanophenyl and dichloromethane, respectively. A fourth complex, [PdI₂(1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀)] (4), was obtained by a ligand exchange reaction through the substitution of the Cl⁻ of complex 3 with I⁻. All four complexes have been characterized by elemental analysis, FT-IR, ¹H and ¹³C NMR spectroscopy and X-ray structure determination. Single crystal X-ray determination showed that the carborane cage, nido for 1, 2 and closo for 3, 4, was coordinated bidentately to the Pd atom through the two P atoms, and the geometry at the Pd atom was square-planar in all the complexes.     

Synthesis of conjugated 2,7-bis(trimethylsilylethynyl)-(phenylethynyl)nfluoren-9-one and 9-(p-methoxyphenyl)-9-methyl derivatives: optical properties

2,7-Substituted 9-fluorenones and 9,9-disubstituted fluorene have been synthesized and their fluorescence properties analyzed. The synthesis of conjugated 2,7-bis(trimethylsilylethynyl)-(phenylethynyl)_nfluoren-9-one (or the 9-(p-methoxyphenyl)-9-methyl) structures was carried out by the heterocoupling reaction between the 2,7-di(halo)fluoren-9-one (or 2,7-dibromo-9-(p-methoxyphenyl)-9-methylfluorene) and p-trimethylsilylethynyl(phenylethynyl)_n (n=1,2), catalyzed by the dichloro bis(triphenylphosphine)palladium and cuprous iodide system, in a divergent synthesis.The π-extended conjugated compounds exhibit fluorescence radiation emission (blue light-emitting), with important quantum yield for the 9-(p-methoxyphenyl)-9-methyl-2,7-bis(trimethylsilylethynyl)-(phenylethynyl)_nfluorenes which increases with the conjugation.     

Formation of chiral 21-helical columnar host system with phenylacetylene unit by using (1R,2S)-2-amino-1,2-diphenylethanol

A tunable supramolecular phenylacetylene host system with a chiral channel-like cavity is developed by using (1R,2S)-2-amino-1,2-diphenylethanol. This host system possesses a chiral 2₁-helical columnar structure; chiral cavities are constructed by the self-assembly of the 2₁-helical column, and guest molecules are included by varying the packing of this column.     

Crystal chemistry and crystallography of the SrR2CuO5 (R=lanthanides) phases

The crystal chemistry and crystallography of the compounds SrR₂CuO₅ (Sr-121, R=lanthanides) were investigated using the powder X-ray Rietveld refinement technique. Among the 11 compositions studied, only R=Dy and Ho formed the stable SrR₂CuO₅ phase. SrR₂CuO₅ was found to be isostructural with the “green phase”, BaR₂CuO₅. The basic structure is orthorhombic with space group Pnma. The lattice parameters for SrDyCuO₅ are a=12.08080(6) Å, b=5.60421(2) Å, c=7.12971(3) Å, V=482.705(4) Å³, and Z=8; and for the Ho analog are a=12.03727(12) Å, b=5.58947(7) Å, c=7.10169(7) Å, V=477.816(9) Å³, and Z=8. In the SrR₂CuO₅ structure, each R is surrounded by seven oxygen atoms, forming a monocapped trigonal prism (RO₇). The isolated CuO₅ group forms a distorted square pyramid. Consecutive layers of prisms are stacked in the b-direction. Bond valence calculations imply that residual strain is largely responsible for the narrow stability of the SrR₂CuO₅ phases with R=Dy and Ho only. X-ray powder reference diffraction patterns for SrDy₂CuO₅ and SrHo₂CuO₅ were determined.     

Subsolidus phase relations and crystal structures of R-Ca-Cu-O (R=Nd, Sm, Gd, Tm) systems

The subsolidus phase relations of R₂O₃-CaO-CuO ternary systems (R=Nd, Sm, Gd, Tm) have been investigated by X-ray powder diffraction. All samples were synthesized at about 950° in air. There exists a ternary compound Ca_14−xR_xCu₂₄O₄₁ (x = 4 for R=Nd, Gd and x = 5 for R = Sm) and a ternary solid solution Ca_2+xR_2−xCu₅O₁₀ (R=Nd, Sm, Gd, Tm) with a wide composition range Δx of about 0.6. The compound Ca_14−xR_xCu₂₄O₄₁ possesses a layered orthorhombic structure and is isostructural to Sr_14−xCa_xCu₂₄O₄₁. The lattice parameters a and c of the compound are basically independent of the ionic radius of R, while the lattice parameter b and unit-cell volume V decrease substantially with the decrease of the ionic radii of R. The Ca_2+xR_2−xCu₅O₁₀ solid solution is isostructural to Ca_2+xY_2−xCu₅O₁₀, the structure of which is based on an orthorhombic “NaCuO₂-type” subcell containing infinite one-dimensional chains of edge-shared square planar cuprate groups crosslinked by the layered cations Ca and R that locate in the inter-chain tunnels.