Bi(OTf)3-catalyzed acylation of p-quinones: a facile synthesis of acylated hydroquinones

p-Quinones undergo smooth acylation with acetic anhydride in the presence of 2 mol % of bismuth triflate under mild conditions to afford the corresponding 1,4-diacylated-2-acetoxylated hydroquinones in excellent yields with high selectivity.     

The Friedel-Crafts acylation of aromatic compounds with carboxylic acids by the combined use of perfluoroalkanoic anhydride and bismuth or scandium triflate

Aromatic ketones were synthesized by solventless Friedel-Crafts acylation of anisole, mesitylene, xylenes, and toluene with acetic acid and benzoic acid in the presence of trifluoroacetic anhydride by use of bismuth or scandium triflate at 30 °C. Toluene, benzene, and even deactivated substrate such as chlorobenzene were benzoylated by the combined use of heptafluorobutyric anhydride and bismuth triflate at 75-100 °C. The catalyst could be easily recovered and reused repeatedly for the reaction.     

Improvement of the Friedel–Crafts benzoylation by using bismuth trifluoromethanesulfonate in 1-butyl-3-methylimidazolium trifluoromethanesulfonate ionic liquid under microwave irradiation

Bismuth trifluoromethanesulfonate (bismuth triflate) catalyzed the Friedel–Crafts benzoylation of activated aromatic compounds when dissolved in 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([BMIM]OTf) ionic liquid. Immobilization of bismuth triflate (5 mol %) in [BMIM]OTf allowed the synthesis of aryl ketones in good to excellent yields with short reaction times under microwave irradiation. This catalytic system was easily recovered and reused several times without any significant loss of the activity.     

Bismuth triflate-catalyzed rearrangement of acetates of the Baylis-Hillman adducts into (E)-trisubstituted alkenes

In the presence of a catalytic amount of bismuth triflate, methyl 3-acetoxy-3-aryl-2-methylenepropanoates and 3-acetoxy-3-aryl-2-methylenepropanitriles were smoothly converted into methyl (2E)-2-(acetoxymethyl)-3-arylprop-2-enoates and (2E)-2-(acetoxymethyl)-3-arylprop-2-enenitriles, respectively. A remarkable reversal in stereochemical directions from ester to nitrile was observed. 3-Aryl-3-hydroxy-2-methylenepropanoates and 3-aryl-3-hydroxy-2-methylenepropanitriles could be easily obtained as Baylis-Hillman adducts from methyl acrylate and acrylonitrile, respectively. The overall process is an efficient isomerization of the Baylis-Hillman adducts to the corresponding cinnamyl derivatives. The isomerization reaction proceeded rapidly and afforded smoothly the cinnamyl acetates in moderate to very good yields using catalytic amounts of Bi(OTf)₃·4H₂O (10 mol %).     

Sc(OTf)3-catalyzed one-pot ene-Prins cyclization: a novel synthesis of octahydro-2H-chromen-4-ols

(R)-Citronellal undergoes initial ene reaction followed by Prins cyclization with aldehydes in the presence of 5 mol % of scandium triflate at ambient temperature to furnish octahydro-2H-chromen-4-ols in good yields and with high cis-selectivity. The use of scandium triflate makes this procedure simple, more convenient, and practical.     

Environment-friendly organic synthesis using bismuth compounds. Bismuth triflate catalyzed synthesis of substituted 3,4-dihydro-2H-1-benzopyrans

A highly catalytic method for the synthesis of dihydrobenzopyrans from salicylaldehydes has been developed. An extension of this method to the synthesis of a pyrano[2,3,b]benzopyran has also been achieved. Bi(OTf)₃·xH₂O (1 < x < 4) (0.1 mol%) smoothly catalyzes the condensation of substituted salicylaldehydes with 2,2-dimethoxypropane to give the corresponding substituted 3,4-dihydro-2H-1-benzopyrans as a mixture of diastereomers (9:1) in moderate yields. The relative configuration of the methoxy groups in the two diastereomers was established by NOE experiments. The advantages of this method include the use of an easy to handle, inexpensive and relatively non-toxic catalyst.     

Heat capacity, enthalpy and entropy of ternary bismuth tantalum oxides

Heat capacity and enthalpy increments of ternary bismuth tantalum oxides Bi₄Ta₂O₁₁, Bi₇Ta₃O₁₈ and Bi₃TaO₇ were measured by the relaxation time method (2-280 K), DSC (265-353 K) and drop calorimetry (622-1322 K). Temperature dependencies of the molar heat capacity in the form C_pm=445.8+0.005451T−7.489×10⁶/T² J K⁻¹ mol⁻¹, C_pm=699.0+0.05276T−9.956×10⁶/T² J K⁻¹ mol⁻¹ and C_pm=251.6+0.06705T−3.237×10⁶/T² J K⁻¹ mol⁻¹ for Bi₃TaO₇, Bi₄Ta₂O₁₁ and for Bi₇Ta₃O₁₈, respectively, were derived by the least-squares method from the experimental data. The molar entropies at 298.15 K, S°_m(298.15 K)=449.6±2.3 J K⁻¹ mol⁻¹ for Bi₄Ta₂O₁₁, S°_m(298.15 K)=743.0±3.8 J K⁻¹ mol⁻¹ for Bi₇Ta₃O₁₈ and S°_m(298.15 K)=304.3±1.6 J K⁻¹ mol⁻¹ for Bi₃TaO₇, were evaluated from the low-temperature heat capacity measurements.     

The structural chemistry of Bi14MO24 (M=Cr, Mo, W) phases: bismuth oxides containing discrete MO4 tetrahedra

The phases Bi₁₄MO₂₄ (M=Cr, Mo, W) have been studied using differential scanning calorimetry, variable temperature X-ray powder diffraction and neutron powder diffraction. All three compounds were found to undergo a phase change, on cooling, from the previously reported tetragonal symmetry (I4/m) to monoclinic symmetry (C2/m). Transition temperatures were determined to be ∼306 K (M=W) and ∼295 K (M=Mo), whereas a gradual transition between 275 and 200 K was observed for M=Cr. The high and low temperature structures are very similar, as indicated by the relationship between the monoclinic and tetragonal unit cell parameters: a_m=√2a_t, b_m=c_t, c_m=a_t, β∼135°. High-resolution neutron powder diffraction data, collected at 400 and 4 K, were used to establish the nature of the transition, which was found to involve a reduction in the statistical possibilities for orientation of the MO₄ tetrahedra. However, in both tetragonal and monoclinic variants, a degree of orientational disorder of the tetrahedra occurs to give partially occupied sites in the average unit cell.     

Crystal structures and photocatalysis of the triclinic polymorphs of BiNbO4 and BiTaO4

The high-temperature polymorphs of two photocatalytic materials, BiNbO₄ and BiTaO₄ were synthesized by the ceramic method. The crystal structures of these materials were determined by single-crystal X-ray diffraction. BiNbO₄ and BiTaO₄ crystallize into the triclinic system P1¯ (No. 2), with a=5.5376(4) Å, b=7.6184(3) Å, c=7.9324(36) Å, α=102.565(3)°, β=90.143(2)°, γ=92.788 (4)°, V=326.21 (5) Å³, Z=4 and a=5.931 (1) Å, b=7.672 (2) Å, c=7.786 (2) Å, α=102.94 (3)°, β=90.04 (3)° γ=93.53 (3)°, V=344.59 (1) Å³ and Z=4, respectively. The structures along the c-axis, consist of layers of [Bi₂O₂] units separated by puckered sheets of (Nb/Ta)O₆ octahedra. Photocatalytic studies on the degradation of dyes indicate selectivity of BiNbO₄ towards aromatics containing quinonic and azo functional groups.     

Environment friendly organic synthesis using bismuth compounds. An efficient method for carbonyl-ene reactions catalyzed by bismuth triflate

Bismuth triflate (0.1 mol %) is a highly efficient catalyst for the cyclization of citronellal 1, a reaction that yields a ratio of 80:20 of isopulegol 2 and neoisopulegol 3. This methodology has also been extended to the synthesis of substituted piperidines. The bismuth triflate catalyzed ene reaction of aldehyde 4 gives a 70:30 mixture of piperidines 5 and 6. The advantages of these methods include the use of a highly efficient catalyst that is relatively nontoxic, cheap and easy to handle.     

Direct-type catalytic three-component Mannich reaction in aqueous media

Bismuth triflate catalyzed direct-type Mannich reaction of cyclohexanone, aromatic aldehyde, and aromatic amine proceeded smoothly in water to afford the corresponding β-amino ketone with very good yield and moderate to good anti selectivity.     

One-dimensional inorganic arrangement in the bismuth oxalate hydroxide Bi(C2O4)OH

Single crystals of Bi(C₂O₄)OH were obtained by the slow diffusion of Bi³⁺ cations through silica gel impregnated with oxalic acid. The structure was solved in the Pnma space group with a=6.0853(2) Å, b=11.4479(3) Å, c=5.9722(2) Å, leading to R=0.0188 and wR=0.0190 from 513 unique reflections. The bismuth coordination polyhedron is a BiO₆E pentagonal bipyramid with the lone pair E sitting at an axial vertex. The opposite axial vertex is occupied by a hydroxyl oxygen atom, which is also an equatorial corner of a neighboring BiO₆E bipyramid. The sharing of the hydroxyl oxygen atoms build zig-zag chains running down the [100] direction. These chains are aligned in a sheet parallel to the (010) plane and are further connected through oxalate ions to form a three-dimensional arrangement. On heating, Bi(C₂O₄)OH decomposes to the meta-stable quadratic β-Bi₂O₃ phase.     

Cu22Bi12S21Cl16—A mixed conductor with fast one-dimensional copper(I) ion transport

Melting reactions of Cu, CuCl, S, and Bi₂S₃ yield black, shiny needles of Cu₂₂₍₁₎Bi₁₂S₂₁₍₁₎Cl₁₆₍₁₎. The compound decomposes peritectically at 649(5) K. Oxidation state +I of the copper atoms is supported by Cu-K-XANES. The compound crystallizes in the hexagonal space group P6/m with a=2116.7(7) pm and c=395.17(5) pm. Seven anions coordinate each of the two independent bismuth cations in the shape of mono-capped trigonal prisms. These polyhedra share edges and faces to form trigonal and hexagonal tubes running along [0 0 1]. The hexagonal tubes are centered by chloride ions, which are surrounded by disordered copper cations. The majority of copper cations are distributed over numerous sites between the tubes. The Joint Probability Density Function (JPDF) reveals a continuous pathway along [0 0 1]. The high mobility of the copper cations along [0 0 1] was demonstrated by impedance spectroscopy and DC polarization measurements on single crystals. The ionic conductivity at 450 K is about σ_ion=0.06 S cm⁻¹, and the activation energy for Cu⁺ ion conduction is E_a=0.44 eV. The chemical diffusion coefficient of copper is in the order of D_cu^δ=10¹⁹ cm⁻³ at 420 K. The electronic band gap (p-type conductor) was determined as E_g=0.06 eV. At room temperature the thermal conductivity of a pressed pellet is about κ=0.3 W K⁻¹ m⁻¹ and the Seebeck coefficient is S=43 μV K⁻¹.     

The first bismuth(III)-catalyzed guanylation of thioureas

This work describes the first catalytic bismuth-promoted synthesis of polysubstituted guanidines in good yields through the guanylation reaction of N-benzoyl or N-phenylthioureas with primary and secondary amines, but now employing equimolar amounts of each organic reagent. Both bismuth iodine and bismuth nitrate were efficient as inorganic thiophiles at only 5 mol % in relation to substrates, being the first example of inorganic thiophiles acting in guanylation at catalytic levels.     

Utilising gallium for enhanced electrochemical copper analysis at the bismuth film electrode

A sensitive anodic stripping voltammetric procedure at the bismuth film electrode (BFE) for trace analysis of copper (II) in the presence of gallium is presented. The new protocol circumvents the problems of overlapping stripping signals between copper and bismuth that previously hampered the analysis of copper at the BFE. The results illustrate that the addition of gallium not only improves the reproducibility of the bismuth stripping signal but also facilitates much improved resolution between the stripping signals of bismuth and copper. Investigations into the effect of gallium on the stripping response of copper and bismuth were studied showing a 4:1 gallium:copper mole ratio produces optimum signals from bismuth and copper indicating a possible stoichiometric relationship. Optimisation of other key variables including electrolyte composition, accumulation parameters and appropriate waveform settings were studied and optimised. The optimised procedures show a range of linear calibration plots (R² > 0.994) ranging from 2 to 500 μg L⁻¹ and the relative standard deviation for a solution containing 100 μg L⁻¹ copper was 3.7% (n = 10). Utilising an accumulation time of 300 s the limit of detection was 1.4 μg L⁻¹ (S/N = 3). This technique was successfully applied to the analysis of copper in tap water representing the first successful copper determination in real samples using the BFE.     

Arsenic, antimony and bismuth in human hair from potentially exposed individuals in the vicinity of antimony mines in Southwest China

To study the effect of the environmental pollution in exposed population, human hair samples of residents were collected from two typical antimony mines (Xikuangshan antimony mine and Qinglong antimony mine, Southwest China) and one non-mining city (Guiyang, Southwest China), and the concentrations of arsenic, antimony and bismuth in these samples were analyzed by hydride generation-atomic fluorescence spectrometry. Arsenic concentrations for Xikuangshan, Qinglong, and Guiyang ranged 0.236-48.4 (mean 4.21), 0.130-16.1 (mean 2.96), and 0.104-0.796 (mean 0.280) μg/g, respectively. Antimony concentrations for Xikuangshan, Qinglong, and Guiyang ranged 0.250-82.4 (mean 15.9), 0.060-45.9 (mean 5.15), and 0.065-2.87 (mean 0.532) μg/g, respectively. Bismuth contents were found to be greater than the limit of detection (LOD > 0.016 μg/g) in all the human hair samples collected from residents from Qinglong antimony mine, 95.5% samples from Xikuangshan mine and only 22.7% samples from Guiyang. There were no significant differences in both arsenic and antimony concentrations between hair samples from male and female individuals in the same area (P > 0.05). Arsenic and bismuth were mainly present in samples from children (5-9 years) and adults aged 41-51 years. Relatively high antimony contents (≥ 3 μg/g) were detected mainly in samples from children and adults aged ≥ 41 years. Significant correlation was found between the concentrations of arsenic and antimony in the human hair samples (r = 0.523, P < 0.05). The results indicate that arsenic and antimony in antimony mining area may significantly affect human health.     

Sc(OTf)3-catalyzed sugar based tandem ene-Prins cyclization: a novel synthesis of hexahydro-2H-furo[3,2-b]pyranopyran scaffolds

Ttandem ene-Prins cyclization between an aldehyde and an olefin tethered sugar aldehyde has been achieved using a catalytic amount of scandium triflate (10 mol %) at ambient temperature to give a novel series of sugar annulated pyranopyran derivatives in good yields with high selectivity. This is the first report on sugar based ene-Prins cyclization between an aldehyde and O-prenyl derivative of a sugar aldehyde.     

Cu(OTf)2-catalyzed synthesis of imidazo[1,2-a]pyridines from α-diazoketones and 2-aminopyridines

α-Diazoketones undergo smooth coupling with 2-aminopyridines in the presence of 10 mol % of copper(II) triflate to produce the corresponding 2-substituted imidazo[1,2-a]pyridines (IPs) in excellent yields with high selectivity. Rh₂(OAc)₄ is also found to be an equally effective catalyst for this transformation.     

Sequential injection method for the direct spectrophotometric determination of bismuth in pharmaceutical products

A spectrophotometric method is reported for the determination of bismuth in pharmaceutical products using sequential injection analysis. Methylthymol blue (MTB) was used as a color forming reagent and the absorbance of the Bi(III)-MTB complex was monitored at 548 nm. The various chemical and physical variables that affected the reaction were studied. A linear calibration graph was obtained in the range 0.0-75.0 mg l⁻¹ Bi(III) at a sampling frequency of 72 h⁻¹. The reagent consumption was considerably reduced compared to conventional flow injection systems, as only 150 μl of MTB were consumed per run. The precision was very satisfactory (s_r=0.5%, at 50.0 mg l⁻¹ Bi(III), n=12) and the limit of detection, c_L, was 0.250 mg l⁻¹. The developed method was applied successfully to the analysis of various pharmaceutical products containing Bi(III). The relative errors e_r, were <1.5% in all cases and were evaluated by comparison of the obtained results with those found using atomic absorption spectrometry as the reference method.     

Series of compositions Bi2(M′xM1−x)4O9 (M′, M=Al, Ga, Fe; 0≤x≤1) with mullite-type crystal structure: Synthesis, characterization and O/O exchange experiment

Series of compositions Bi₂(M′_xM_1−x)₄O₉ with x=0.0, 0.1,…, 1.0 and M′/M=Ga/Al, Fe/Al and Fe/Ga were synthesized by dissolving appropriate amounts of corresponding metal nitrate hydrates in glycerine, followed by gelation, calcination and final heating at 800 °C for 24 h. The new compositions with M′/M=Ga/Al form solid-solution series, which are isotypes to the two other series M′/M=Fe/Al and Fe/Ga. The XRD data analysis yielded in all cases a linear dependence of the lattice parameters related on x. Rietveld structure refinements of the XRD patterns of the new compounds, Bi₂(Ga_xAl_1−x)₄O₉ reveal a preferential occupation of Ga in tetrahedral site (4 h). The IR absorption spectra measured between 50 and 4000 cm⁻¹ of all systems show systematic shifts in peak positions related to the degree of substitution. Samples treated in ¹⁸O₂ atmosphere (16 h at 800 °C, 200 mbar, 95% ¹⁸O₂) for ¹⁸O/¹⁶O isotope exchange experiments show a well-separated IR absorption peak related to the M-¹⁸O_c-M vibration, where O_c denotes the common oxygen of two tetrahedral type MO₄ units. The intensity ratio of M-¹⁸O_c/M-¹⁶O_c IR absorption peaks and the average crystal sizes were used to estimate the tracer diffusion coefficients of polycrystalline Bi₂Al₄O₉ (D=2×10⁻²² m²s⁻¹), Bi₂Fe₄O₉ (D=5×10⁻²¹ m²s⁻¹), Bi₂(Ga/Al)₄O₉ (D=2×10⁻²¹ m²s⁻¹) and Bi₂Ga₄O₉ (D=2×10⁻²⁰ m²s⁻¹).