Synthesis and properties of a series of well-defined and polydisperse benzo[1,2-b:4,3-b']dithiophene oligomers

Monodisperse and polydisperse oligomers of benzo[1,2-b:4,3-b']dithiophene (BDT) (1-14), including three types of oligomers with different spacers combining BDT units (direct linkage, vinylene spacers, and ethynylene spacers), were synthesized, and their thermal, optical, and electrochemical properties were investigated. The oligomers were synthesized using Suzuki, Stille, Wittig, and Sonogashira coupling reactions. All of the monodisperse oligomers showed high melting points and 5% weight loss temperatures (T(d) > 400 degrees C). The fluorescence maxima of all oligomers were red-shifted, and the emission colors varied from blue to yellow as the chain lengths-and thus the conjugation lengths-increased. The vinylene-bridged oligomers emitted at longer wavelengths than the direct-linked and ethynylene-bridged oligomers. UV-vis absorption spectra in toluene solution indicated an effective conjugation length of about six BDT units for polydisperse oligomer 5. Cyclic voltammetry measurement indicated that tetramer 3 had high electrochemical stability. Although tetramer 3 and vinylene-bridged tetramer 8 exhibited reversible oxidation waves, ethynylene-bridged tetramer 13 showed an irreversible oxidation process. Each type of monodisperse oligomer exhibited higher HOMO levels with increasing chain length.     

Solid-phase synthesis of m-phenylene ethynylene heterosequence oligomers

Both homo- and heterosequence m-phenylene ethynylene oligomers are synthesized using a conceptually simple iterative solid-phase strategy. Oligomers are attached to Merrifield's resin through a known triazene-type linkage. The phenylene ethynylene molecular backbone is constructed through a series of palladium-mediated cross-coupling reactions. The strategy employs two types of monomers that bear orthogonal reactivity, one being a monoprotected bisethynyl arene and the other being a 3-bromo-5-iodo arene. The catalyst conditions are tailored to the requirements of each monomer type. The monoprotected bisethynyl arene is coupled to the growing chain in 2 h at room temperature using a Pd(I) dimer precatalyst ((t)Bu3P(Pd(mu-Cl)(mu-2-methyl allyl)Pd)P(t)Bu3) in conjunction with ZnBr2 and diisopropylamine. In alternate steps, the resin is deprotected in situ with TBAF and coupled to the 3-bromo-5-iodo arene using the iodo selective Pd(tri-2-furylphosphine)4 catalyst in conjunction with CuI and piperidine; this reaction is also completed in 2 h at room temperature. These cross-coupling events are alternated until an oligomer of the desired length is achieved. The oligomer is then cleaved from the resin using CH(2)I(2)/I(2) at 110 degrees C and purified using preparatory GPC. Using this method, a series of homo- and heterosequence oligomers up to 12 units in length in excellent yield and purity were synthesized on the 100 mg scale. Longer oligomers were attempted; however, deletion sequences were found in oligomers longer than 12 units.     

A Rapid Solid-phase Synthesis to Soluble Oligothiophene Molecular Wires

A novel method for the preparation of oligothiophene molecular wires is described via a bi-directional solid-phase synthesis. Using an alternating sequence of bromination and Stille coupling reactions, oligomers were obtained up to the heptamer in excellent yield and purity.     

One-pot synthesis of 4,8-dibromobenzo[1,2-d;4,5-d']bistriazole and synthesis of its derivatives as new units for conjugated materials

The one-pot synthesis of 4,8-dibromobenzo[1,2-d;4,5-d']bistriazole, followed by alkylation and Stille coupling to yield three different isomeric derivatives with markedly different optoelectronic properties, is reported. These derivatives show potential as new units in organic oligomers and polymers for electronics applications.     

Total synthesis of leustroducsin B

Leustroducsin B was synthesized via a convergent route based on division of the leustroducsin molecule into three segments A, B, and C. Two coupling reactions (Julia coupling reaction and Nozaki-Hiyama-Kishi (NHK) reaction) were employed for coupling of segments A and B: segment A1 for the Julia coupling reaction was prepared by a combination of Sharpless asymmetric epoxidation and an epoxide-cleavage reaction with an organoaluminum reagent, while segment A2 for the NHK reaction was synthesized from optically active alcohol that had previously been prepared by lipase-catalyzed kinetic resolution. Segment B, whose structure was modified with some functional groups, was synthesized from (R)-malic acid by a combination of Wittig reaction and Sharpless asymmetric dihydroxylation, and segment C, containing a cyclohexane moiety, was prepared by asymmetric Diels-Alder reaction. Segment B was first coupled with segment A1 via the Julia coupling reaction, but the yield was low due to unexpected epimerization. The NHK reaction of segment A2 proceeded to give the coupling product in good yield. This product was coupled with segment C via Wittig and Stille coupling reactions, and finally, phosphorylation was carried out by partial hydrolysis of a cyclic phosphate to give leustroducsin B.     

Well-defined enantiopure 1,1'-binaphthyl-based oligomers: synthesis,structure, photophysical properties,and chiral sensing

A series of well-defined enantiopure 1,1'-binaphthyl-based oligomers linked through their 6,6'-positions, ranging from quaternaphthol to decanaphthol, have been synthesized by Suzuki and Stille coupling reactions. These novel oligonaphthyls have been characterized by (1)H and (13)C[(1)H] NMR spectroscopy and high-resolution mass spectrometry. A combination of X-ray structural and CD studies suggests that these oligonaphthyls adopt zigzag but not helical conformations. As the chain length increases, the compounds show enhanced fluorescence. The fluorescence intensity of oligonaphthols is almost 2 orders of magnitude higher than that of 1,1'-bi-2-naphthol and can be effectively and enantioselectively quenched with trans-1,2-diaminocyclohexane with an enantioselectivity factor of 1.24. The present work thus demonstrates the potential of constructing chiral sensory materials based on well-defined enantiopure oligonaphthols.     

The Suzuki coupling reaction in the stereocontrolled synthesis of 9-cis-retinoic acid and its ring-demethylated analogues.

The thallium-accelerated Suzuki coupling reaction of tetraenyl iodide 19 and cyclohexenyl boronate 18 afforded ethyl 9-cis-retinoate (12) in high yield. Both coupling partners of the Suzuki reaction are better reacted immediately after generation from their precursors, tetraenylstannane 10 and cyclohexenyl iodide 13. The geometrically homogeneous tetraenylstannane 10, comprising the polyenic side chain of ethyl 9-cis-retinoate and its ring-demethylated analogues, was synthesized by a stereoselective Horner-Wadsworth-Emmons reaction. On the other hand, easily available cyclohexanones are ideal starting materials for preparation of the cyclohexenyl boronates required for the synthesis of the ring-modified 9-cis-retinoic acid analogues. For hindered cyclohexanones, hydrazones were converted to cyclohexenyl iodides. Iodine-lithium exchange and trapping with B(OMe)(3) then afforded the cyclohexenyl boronates. If the precursor cyclohexanone has secondary carbons, the alkenyllithium species was conveniently formed by elimination of the C,N-dilithiated intermediate obtained upon treating the trisylhydrazone with n-BuLi (Shapiro reaction). None of the above procedures allowed the generation of the more substituted organolithium from 2-methylcyclohexanone. However, the alternative Stille cross-coupling of 34 and 10 afforded 9-cis-1,1-bisdemethylretinoic acid 7. Both Suzuki and Stille coupling reactions took place under mild conditions, and the preservation of the retinoid side-chain geometry was therefore secured.     

The first total synthesis of concanamycin f (concanolide a)

A highly stereoselective total synthesis of the macrolide antibiotic concanamycin F (1), a specific and potent inhibitor of vacuolar H(+)-ATPase, has been achieved by a convergent route involving the synthesis and coupling of its 18-membered tetraenic lactone and beta-hydroxyl hemiacetal side chain subunits. The C1-C19 18-membered lactone aldehyde 4 was synthesized through the intermolecular Stille coupling of the C5-C13 vinyl iodide 24 and the C14-C19 vinyl stannane 25, followed by construction of the C1-C4 diene and macrolactonization. Synthesis of 4 via a second convergent route including the esterification of the C1-C13 vinyl iodide 45 and the C14-C19 vinyl stannane 47 followed by the intramolecular Stille coupling was also realized. The highly stereoselective aldol coupling of 4 and the C20-C28 ethyl ketone 5 followed by desilylation provided 1 which was identical with natural concanamycin F.     

Synthesis of fluorene-based oligomeric organoboron reagents via Kumada, Heck, and Stille cross-coupling reactions

Boronic pinacol ester group is not reactive in Kumada, Heck and Stille coupling reaction conditions. Fluorene-based sophisticated organoboron compounds were synthesized by means of Palladium catalyzed Kumada, Heck and Stille cross-coupling reactions from halofluorenyl boronic esters.     

Synthesis, characterization, and properties of 7,7′-bis(3,6-di-tert-butylcarbazol-N-yl)-substituted fluorenyl-oligothiophenes

A series of new 7,7′bis(3,6-di-tert-butylcarbazol-N-yl)-substituted fluorenyl-oligothiophenes bearing 0-, 2-, 4-, 6-, and 8-thiophene rings, namely BCFTn, were synthesized using palladium catalyzed Stille dimerization coupling reactions of their corresponding brominated thiophenes. The relationship between the chemical structure and the properties of these oligomers was evaluated. With respect to the electronic properties, the longest wavelength absorptions, emissions, and also the oxidation potentials can be tuned by varying the conjugation length of the oligothiophene segments. The terminal carbazole and fluorene moieties of the resulting materials are beneficial for their morphology, conjugation length, and solubility.     

Stille偶联法合成芳基取代联吡啶衍生物

以2-溴吡啶为原料,采用碘化和Halogen-Dance反应一锅法合成了2-溴-4-碘吡啶,产率提高至65%.利用卤素反应活性的差异,通过选择性Kumada偶联反应方便地合成了2-溴-4-(4-甲基)苯基吡啶,并通过Stille偶联反应合成了一系列二联、三联及四联吡啶,进行了NMR、MS、IR以及元素分析等表征.     

Synthesis, characterization, and application of cationic water-soluble oligofluorenes in DNA-hybridization detection

A simple and efficient approach was developed for the synthesis of a series of cationic water-soluble oligofluorenes up to a chain length of a heptamer. Bromoalkyl-substituted fluorenyl boronic esters as the key intermediates were synthesized by using a modified Miyaura reaction. With an increasing number of repeat units (trimer to hexamer), the size-specific oligomers have shown redshifts in both the absorption and emission maxima. The emission maximum reaches the limit for the hexamer in both water and buffer solution. The quantum yields of the oligomers decreased with increased oligomer size in water. Both fluorescence quenching of the oligomers by 9,10-anthraquinone-2,6-disulfonate and the fluorescence resonance energy transfer experiments with the oligomers as the donor and fluorescein (Fl)-labeled double-stranded DNA (dsDNA-Fl) as the acceptor revealed the chain-length-dependent behavior. The Stern-Volmer quenching constant increased with the molecular size, whereas the highest donor-sensitized Fl emission was observed for the hexamer. These size-specific oligomers also served as a model to study the structure-property relationships for cationic polyfluorenes.     

Oligoselenophenes (n and p Type): Synthesis and Properties

Russian Journal of General Chemistry - An array of semiconducting oligoselenophenes (n and p types), up to hexamer units, has been synthesized by the double Stille coupling methods using...     

Tuning Redox Chemistry and Photophysics in Core‐Substituted Tetraazaperopyrenes (TAPPs)

Core substitution of tetraazaperopyrenes (TAPPs) has been achieved, and with it, considerable variation of their photo‐ and redox‐chemical properties. Through Suzuki cross coupling starting from the fourfold core‐brominated tetraazaperopyrene, aryl‐substituted TAPPs were synthesized, which displayed very high fluorescence quantum yields (up to 100 %) in solution. Besides the Suzuki reactions, Stille and Sonogashira cross‐couplings were also found to be suitable methods for core derivatization, as demonstrated in the syntheses of alkynyl‐substituted tetraazaperopyrene congeners. Furthermore, TAPPs incorporating intramolecular donor–acceptor combinations of aromatic units ( 8 , 9 ) were accessible by coupling the electron‐poor peropyrene core with electron‐rich aromatic units, which act as strong electron donors. Finally, C‐heteroatom coupling (O, S, N) gave rise to novel TAPP derivatives with strongly modified redox‐chemical behaviour and photophysics in the solid state as well in solution. In particular, TAPP derivatives displaying red fluorescence were obtained for the first time.     

14C-labeled and large-scale synthesis of the angiotensin-(1-7)-receptor agonist AVE 0991 by cross-coupling reactions

The synthesis of (14)C-labeled AVE 0991 ((14)()C-1a) and large-scale synthesis of AVE 0991 (1a) are described. In the key step of the synthesis, the C-C coupling reaction of the imidazole (2) and thiophene (3) building blocks was studied under Suzuki and Stille reaction conditions, respectively. Suzuki reaction gave only moderate yields, whereas the best results were obtained under Stille reaction conditions with up to 64% yield.     

Synthesis and characterization of a helical step‐ladder polyarylene

A helical step‐ladder polyarylene incorporating chiral (R)‐2,2′‐dioctoxy‐1,1′‐binaphthyl units was synthesized for the first time. The first step involved the preparation of a precursor poly(arylene ketone) via a palladium‐mediated Suzuki‐type cross‐coupling reaction with the aid of microwave heating. Two polymer‐analog reaction steps, the reduction of the keto groups to tertiary alcohol functionalities and subsequent intramolecular Friedel–Crafts cyclization, gave a step‐ladder polymer ( 6 ) in good yields with reasonable mean average molecular weights greater than 13,000. The regioselective cyclization pattern in the α position of the naphthalene core was confirmed by a comparison of the NMR data of the polymer with those of the corresponding model ladder oligomers, 12 and 13 , and also a single‐crystal structure of 13 . The optical spectra of the oligomers and polymers indicated that there was little electronic interaction across the binaphthyl units. The circular dichroism spectrum of 6 exhibited a strong bisignate Cotton effect in the π–π* absorption region of the planar chromophores, which reflected the strong exciton coupling within the helical polymer chain. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5533–5545, 2006     

Synthesis and characterization of novel conjugated polymers based on 3-cyclobutene-l,2-dione moiety

Three novel conjugated polymers bearing 3,4-bis(4-hexylthiophen-2-yl)-3-cyclobutene-1,2-dione unit in their main chain have been synthesized successfully in good yields through Suzuki or Stille coupling reaction.Their molecular structures have been confirmed by FT-IR,~1H NMR and ~(13)C NMR.All these copolymers exhibit broad and strong absorption bands in UV-vis region,and their optical band gaps are calculated to be 1.6-2.0 eV.suggesting that they have good coverage with the solar spectrum.These polymers...     

Synthesis of a functionalized dialkynylferrocene for molecular electronics

The first preparation of a 1,1′-dialkynylferrocene containing two thioacetyl units as alligator clips for the application as molecular wires by a Stille coupling is described. A building block principle for the synthesis of longer and more complicated molecular wires containing more than one ferrocene unit is presented. To cite this article: M. Vollmann, H. Butenschön, C. R. Chimie 8 (2005).     

Synthesis and properties of thiophene-functionalized π-extended tetrathiafulvalenes

Two molecular ensembles composed of an array of thiophene-extended tetrathiafulvalene-thiophene were synthesized using Stille coupling and Horner-Wittig reaction as the key steps. Electrochemical redox and electronic absorption properties were investigated by voltammetric and UV-vis spectroscopic analyses.     

迭代Suzuki偶联反应合成全氟环丁基芳基醚齐聚物的研究

对迭代Suzuki偶联反应合成全氟环丁基芳基醚齐聚物的方法进行了研究, 并合成了全氟环丁基芳基醚齐聚物. 首先从对溴苯酚出发, 合成了含有一个全氟环丁基芳基醚结构单元的中间体3. 芳基硼酸与中间体3进行Suzuki偶联反应, 得到了含有一个全氟环丁基芳基醚结构单元的硼酸. 重复与中间体3进行Suzuki偶联反应, 从而合成了全氟环丁基芳基醚二聚体和三聚体. 最后通过热环化二聚反应合成了全氟环丁基芳基醚三聚体、五聚体和七聚体.