基于黄金分割搜索算法的行波管测量方法

为了提供声学材料的测试环境,该文通过有源吸声技术在行波管中建立了一套测量系统,声管中实现了模拟无限水域的行波场环境,从而对样品的声学参数进行测量。提出了一种利用黄金分割搜索算法对最佳时延与幅值进行搜索从而完成行波场建立的方法。在上述行波场建立的基础上,利用双水听器法分别对水柱与钢板样品的声学参数进行了声学测量,透射系数测量值与理论值符合较好。该方法为声学参数的测量方法提供了有意义的参考。     

基于四水听器的充水弹性管声速测量方法*

实验室中水声材料声学参数的测量主要在水声声管中进行。管内平面波声速是正确测量这些参数的基础。该文提出一种基于四水听器结合不同边界的测量充水弹性管中声速的新方法。该方法利用4个固定位置处的水听器,采用最小二乘的方法,使得两组水听器分别得到的声管末端入射波声压差值的平方最小的声速即为管内平面波声速。该方法利用单频信号,在每一频率点均可测得声速,可以在任一种声管末端边界下进行测量,同时无需知道各水听器到边界的精确距离,在文中的3种边界下声速测量结果具有很好的一致性,实验操作简单、误差很小。该方法的仿真结果与管内声速的理论值吻合得很好,同时实验测量结果与仿真值之间的误差很小,证明了方法的准确性以及鲁棒性,为声管声速测量提供一个很好的思路。     

Wide-band underwater acoustic absorption based on locally resonant unit and interpenetrating network structure

The interpenetrating network structure provides an interesting avenue to novel materials. Locally resonant phononic crystal (LRPC) exhibits excellent sound attenuation performance based on the periodical arrangement of sound wave scatters. Combining the LRPC concept and interpenetrating network glassy structure, this paper has developed a new material which can achieve a wide band underwater strong acoustic absorption. Underwater absorption coefficients of different samples were measured by the pulse tube. Measurement results show that the new material possesses excellent underwater acoustic effects in a wide frequency range.Moreover, in order to investigate impacts of locally resonant units,some defects are introduced into the sample. The experimental result and the theoretical calculation both show that locally resonant units being connected to a network structure play an important role in achieving a wide band strong acoustic absorption.     

Modeling and characterizing the typical under-ice acoustic channel for the Arctic

The properties of arctic underwater acoustic channel were researched using BurkeTwersky(BT) model and ray theory.In the BT model,sea ice ridge is assumed as a set of semi-elliptical cylinder randomly distributed on a stress-free surface.By approximation of low frequency and high frequency of the BT model,the reflection coefficients were calculated at different frequencies.On the basis of ray theory,the acoustic field was calculated and the properties of underwater acoustic channel was analyzed.Compared to underwater acoustic channel properties when the boundary is air,the results show that under the ice surface some sound rays disappear during transmission,because the ice surface reflection coefficients is less than absolute soft surface.Especially,the higher the frequency,the higher the under-ice transmission loss.As a result,under-ice condition is unfavourable for acoustic signals to travel far.Besides,as to the channel structure,the reflection coefficient of ice layer is smaller,the channel multi-path structure is not significant compared to water-air interface without ice.The research results are valuable for our understanding of hydroacoustic channel and the prediction of the sonar system working in the polar region.     

基于声压-质点速度声强探头的材料吸声系数的测量

通过由一个声压换能器和一个质点速度换能器所构成的传感器(p-u声强探头)同时测量材料表面附近的声压和质点振动速度,可直接得到其声学阻抗,进而得到材料的反射因子、吸声系数。本文利用一个p-u探头声强测量系统,在半消声室内测量了三聚氰胺泡沫的吸声系数,分析了声源高度和入射角度、材料样本尺寸和厚度对吸声系数测量的影响,并和阻抗管中测量得到的法向吸声系数进行了对比。最后分析了声阻抗率的幅值和相位误差对吸声系数的影响,推导了它们的误差传递公式。     

压力罐中水声材料声学特性的参量源测量法

设计了一种原波频率500 kHz、差频范围1~30 kHz的截断宽带参量阵,作为水声材料测量系统的声源。通过分析典型频率下的宽带参量源指向性理论计算和实际测量结果,发现两者结果的曲线基本吻合,证明计算模型是正确的。应用钟形短时脉冲实现水声材料声特性的宽带测量,有益于降低样品边缘衍射干扰。并建立了测量水声材料大面积板状样品声压反射系数、声压透射系数和吸声系数的压力罐测量系统,罐体内尺寸Φ4 m×12 m,最高静水压4.5 MPa,测量频率范围1~30 kHz。对标准样品(尺寸1m×1m)进行了测量实验,其测量结果和理论曲线有很好的吻合,参量源测量法得到了验证;之后,通过对一块橡胶板样品在不同静压力下的吸声性能进行了测量和有效评估,进一步确认了参量源测量法在压力罐这样有限水域中的潜在应用价值。      

黏弹性材料的动态力学特性及其对覆盖层吸声性能的影响

本文利用标准化动态力学测量手段获得了某种高分子聚合物的动态杨氏模量,并根据时温等效原理对动态杨氏模量与声学测量在频段上的差异加以分析和转换,得到了500—7500 Hz频率范围内该黏弹性材料杨氏模量随频率变化的特性.基于所测得动态杨氏模量,采用有限元方法分析了均匀黏弹材料的吸声性能,并将仿真结果与样品声管实验数据进行对比,验证了测试所得参数的准确性.进一步仿真分析了含有局域共振结构的声学覆盖层吸声性能,并讨论了黏弹性材料的动态特性对其吸声性能的影响,提出了改进水声覆盖层低频宽带吸声特性的建议.     

水下材料吸隔声性能测试近场长脉冲传递函数法

为消除有限空间壁面反射对大样水下材料声学性能测试的影响,利用传递函数法和脉冲法测试原理,建立声波垂直入射情况下水下材料吸隔声性能测试近场长脉冲传递函数法,10mm均匀钢板模型声学性能试验表明,压力环境下钢板反射及隔声性能测试值与理论值基本一致,反射系数测试偏差小于0.1,隔声量测试偏差小于1dB,可以采用近场长脉冲传递函数法测量声波垂直入射情况下材料声学性能,可有效克服边界反射对测试的影响。     

A wideband combined transducer for measuring system in sound tube

A wideband transducer for sound tube system is presented,which combines longitudinal transducer and ClassⅣflextensional transducer to improve the performance at low frequency and broaden the working band.The equivalent circuit is obtained and used to analyze the coupling mechanism between longitudinal transducer and flextensional transducer.A prototype of the transducer is developed after optimizing the electro-acoustic performances by Finite Element Method.The standing wave in the sound tube stimulated by this transducer has been studied and the sound absorbing coefficients of two acoustic materials samples are measured using this sound tube,which shows that the transducer can meet the requirements of acoustic material measurement with the working band ranging from 1.4 kHz to 23 kHz.     

The modified method of measuring the complex transmission coefficient of multilayer acoustical panel in impedance tube

In order to improve the measuring precision of complex transmission coefficients in impedance tube, the influence that comes from the transmission-reflection wave in the transmission tube is analyzed, and the modified formulas of complex reflection and complex transmission coefficients are proposed. With the experiment of organic glass, it can be confirmed that the modified formulas are useful and can decrease the demand of the tube end. Through the measurement of the complex transmission coefficients of multilayer acoustical panel, the complex transmission coefficients of multilayer both forward and backward incidences are definitely the same in theory either normal or oblique incidence. When sound wave is normal incidence, the method is also verified to be correct with experiments in impedance tube.     

浅海起伏海面下气泡层对声传播的影响

分析了起伏海面下风浪引起的气泡层对海面反射损失和对声传播的影响.一方面,气泡层会改变原来水中的声速剖面;另一方面,气泡层会对声波产生散射和吸收作用.考虑以上两方面的因素,分析了不同风速下气泡层对海面反射损失和声传播损失的影响,仿真发现,在风速大于10 m/s时,对于2 k Hz以上频率时气泡层对小掠射角下海面反射损失的影响不可忽视.在给定的水声环境中,当声源深度和接收深度都为7 m时,风速为16 m/s的风浪下生成的气泡层,在10 km处对3 k Hz的声传播损失的影响达到8.1 d B.当声源深度和接收深度都为18 m时,风速为16 m/s的风浪下生成的气泡层,在10 km处对3 k Hz的声传播损失的影响达到4 d B.     

北极典型冰下声信道建模及特性

将Burke-Twersky (BT)散射模型与射线理论相结合研究北极典型冰下的水声信道特性。BT模型将极地冰水界面的冰脊视为随机分布在自由表面的半椭圆柱。首先根据BT模型分别对高频和低频情况下的冰面反射系数取近似,计算不同频率的冰面反射系数。然后结合射线理论计算冰下声场并分析冰下信道特性,并与相同条件下绝对软界面的水声信道进行对比研究。结果显示,由于冰界面的存在,冰水界面与绝对软界面相比,冰面反射系数较小,使得部分声线不会传播很远,且随频率的增加衰减越发严重,因此不利于声信号远距离传播;此外在信道结构上,由于冰层反射系数较小,冰下信道多径相较于无冰的水-空气界面其多途现象不明显。研究结果对认知极地冰下水声信道特性以及开展极地水声系统性能预报具有一定意义。      

Reflection and transmission of acoustic waves on multilayered porous media

Based on the Boit theory of acoustic wave propagation in fluid-satu-rated porous medium we have studied in this paper the acoustic reflection andtransmission on multilayered porous media,in which the adequate boundaryconditions across the interfaces are taken into account.Numerical calculationsof the reflection and transmission coefficients at different incident angles andfrequencies of the fast compressional wave incident on porous media with threeor four layers are presented.The results indicate that the maximum or mini-mum reflection and transmission coefficients appear at certain ratios of thewavelength to the thickness.The acoustic incident angle and porous mediumproperties are shown to affect significantly these coefficients.As an example,the measured transmission coefficients in a water-saturated fused glass beadsample are in good agreement with theoretical prediction.     

Interaction of ultrasonic wave with void-containing layer in solid

Using a general mode for sound reflection from multilayered media,we present in this paper the expressions for sound reflection and transmissioncoefficients on void-containing interface layer in solid and derive the character-istic equation for symmetric and antisymmetric modes of the interface wavesalong the layer.The method for evaluating the effective elastic moduli ofvoid-containing solid is also introduced.The numerical calculation given in thispaper shows the influences of the void volume concentration and layer thick-ness on the sound reflection coefficients and interface wave velocity,providing atheoretical basis for inverse of the mechanical properties of void-containinglayer based on the ultrasonic measurement.     

基于等效参数反演的敷设声学覆盖层的水下圆柱壳体声散射研究

应用了一种等效方法计算敷设声学覆盖层无限长圆柱壳体水下声散射特性.等效方法的核心是忽略复杂声学覆盖层内部的声学结构,将其作为具有等效材料参数的均匀阻尼层进行建模,该均匀阻尼层具有和原覆盖层相同的复反射系数.进而,应用COMSOL Multiphysics软件建立敷设均匀阻尼层圆柱壳体的有限元模型并求解其声散射特性.等效方法的关键是等效材料参数的获取.采用充水阻抗管实验和有限元数值实验两种方法获取声学覆盖层贴敷在与壳体具有相同厚度、相同材料背衬条件下的复反射系数,在此基础上,基于遗传算法反演材料的等效参数.研究表明,等效参数具有频变特性,且尽管等效杨氏模量和等效泊松比在频率范围内存在较大波动,但是等效前后复反射系数仍保持一致.为了验证等效方法求解壳体声散射特性的准确性,同时建立了敷设声学覆盖层壳体的完整有限元模型,将覆盖层内部声学结构进行精细建模,并求其声散射特性.结果表明,两种方法求得的形态函数符合得较好,在整个频率范围内平均误差大约为1 d B.     

A model comparison of the absorption coefficient of a Microperforated Insertion Unit in the frequency and time domains

The absorption coefficient of acoustic materials can be measured either in the frequency or the time domain. At normal incidence, a sample of the material is fitted within an impedance tube and the absorption coefficient is calculated in the frequency domain from the measurement of the transfer function between two microphones [ISO 10534-2. Acoustics - determination of sound absorption coefficient and impedance in impedance tubes - Part 2: transfer function method. ISO, Geneva, Switzerland; 1996]. When the acoustic material must be characterized at oblique incidence or in situ (noise barriers, for instance) the absorption coefficient is calculated from measurements of the loudspeaker-microphone impulse response in the time domain, both in free field and in front of the sample [CEN/TS 1793-5. Road traffic noise reduction devices - test method for determining the acoustic performance - Part 5: intrinsic characteristics - in situ values of sound reflection and airborne sound insulation. CEN, Brussels, Belgium; 2003, ISO 13472-1. Acoustic measurement of sound absorption properties of road surfaces in situ - Part I: extended surface method. ISO, Geneva, Switzerland; 2002]. Since the absorption is an intrinsic property of the acoustic material, its measurement in either domain must provide the same result. However, this has not been formally demonstrated yet. The aim of this paper is to carry out a comparison between the absorption coefficient predicted by the impedance model of a Microperforated Insertion Unit and the absorption coefficient predicted from a simulated reflection trace taken into account the finite length of the time window.     

Investigations on the acoustic transmission characteristics of underwater perforated panel structures

Perforated panel structures have a wide potential in underwater applications. However, up to now there has been little related research. The acoustic impedance of an underwater perforated panel is obtained based on the theories for air perforated panel sound absorption. In this paper sound transmission characteristics of underwater perforated panel structures are theoretically analyzed by the transfer matrix method. A formula for normal incidence sound transmission coefficients is given. The main factors that have effects on the acoustic transmission coefficient are analyzed by numerical simulations. The perforated panel structures made by ourselves are tested in a standing-wave tube by the four-sensor transfer-function method. The experimental results are well in accord with the results obtained by the numerical method, which proves that the theoretical analysis is correct. This paper has provided theoretical and experimental bases for the design of underwater perforated panel structures.     

一种现场测量材料吸声特性的新方法

现有的材料吸声系数测量方法主要有混响室法和驻波管法,都属于实验室测量方法,不适合现场测量。使用普通扬声器的反射法可以对材料的吸声特性进行现场测量,但是对材料尺寸和测试环境有较高的要求。本文利用参量阵非线性自解调可听声的高指向性和在阵长距离内的平面波特性,结合传递函数法,测量材料的吸声系数,并与传统驻波管测量结果进行了对比。结果表明在普通房间条件下,不需要驻波管,混响室等实验环境,即可对小尺寸的材料进行吸声系数的现场快速测量,具有较大的实用性。      

可听声频段的声学超材料

制作了一维周期排列的亥姆霍兹共振器超材料,在空气环境下测试了其在可听声频段声学透射行为.实验结果表明,在2.1—3.5 kHz附近该材料具有透射衰减的吸收峰,利用声传输线理论（ATLM）计算的透射率和实验结果一致,同时由计算的等效阻抗分析可知,实验中出现的吸收峰是由HRs共振的回波反射引起的.另外,实验测试的样品中透射信号分布进一步验证了材料的共振效应,也就是会出现与外加激励反相响应.基于前述的共振模型计算出该材料的等效弹性模量为负. 关键词： 亥姆霍兹共振器 声传输线 吸收峰 等效弹性模量     

正交各向异性板液/固界面的声反射与声透射

采用Legendre正交多项式法,对液/固界面声波反射和透射系数进行求解。利用Legendre正交多项式对正交各向异性板中的位移解进行展开,推导出板中的应力和波动控制方程。联立液/固界面的边界条件和波动控制方程,建立线性无关方程组,用以计算液/固界面的反射和透射系数及Legendre多项式的展开系数,计算所得铝板液/固界面的反射和透射系数与传递矩阵法的计算结果吻合良好。以单向纤维增强复合材料板为例,在不同的方位角下,分析了反射和透射系数随斜入射角度、入射波频率的变化关系,以及板中声场的位移分布。所取Legendre正交多项式截止阶数越大,可用来计算的频厚积范围越大。研究拓展了Legendre正交多项式法的适用范围,为材料力学性能的声学测量提供了理论基础。