Determination de la configuration absolue de quelques derives du bicyclo[2.2.2]octane: Utilisation comparee de la regle des octants et de la methode d'horeau

A series of bicyclo[2.2.2]octane derivatives whose absolute configurations are known through chemical correlations with confirmed reference products (bicyclo[2.2.2]octanol, bicyclo[2.2.2]octene carboxylic acid) have been prepared.     

Oxidative Dearomatization: Synthesis of Functionalized Bicyclo[2.2.2]octenones,Sigmatropic Shift in Excited State,and Radical-Induced Cleavage of Cyclopropane Ring

Synthesis of novel bicyclo[2.2.2]octenones endowed with a β,γ-enone system in which γ-carbon is substituted with an electron-withdrawing group from simple aromatics is described. Oxa-di-pi-methane reaction of bicyclo[2.2.2]octenones to functionalized bicyclo[3.3.0]octanes and their transformation to bicyclo[3.2.1]octane framework are also presented.     

Polyesters containing bicyclo[2.2.2]octane and bicyclo[3.2.2]nonane rings

Polyesters containing bicyclo[2.2.2]octane and bicyclo[3.2.2]nonane rings are prepared from 1,4-bis(carboethoxy)bicyclo[2.2.2]octane, 1,4-bis(hydroxymethyl)bicyclo[2.2.2]-octane and the 1,5-disubstituted bicyclo[3.2.2]nonane analogs. These polyesters are compared to the related polymers containing 1,4-phenylene and trans-1,4-cyclohexylene rings in terms of their melting point, thermal stabilities and oxidative stabilities. The lower symmetry of the bicyclo[3.2.2]nonane ring produces lower-melting polymers than the other ring systems. The remaining three rings are approximately equivalent in their effect on the melting point of a polymer provided that no more than one bicyclo[2.2.2]octane ring is present per polymer repeat unit. Two such rings produce a highermelting polymer than any other combination. Both the thermal and oxidative stabilities of the polyesters is improved by the presence of the bicyclo rings. This is attributed to the rings providing an approximation of a ladder polymer.     

Cycloaddition between electron-deficient pi-systems, photochemical and radical-induced reactions: a novel, general, and stereoselective route to polyfunctionalized bridged bicyclo[2.2.2]octanes, bicyclo[3.3.0]octanes, bicyclo[4.2.0]octanes, and tricyclo[4.3.1.0(3,7)]decanes

A novel, general, and stereoselective route to functionalized bridged bicyclo[2.2.2]octanes, bicyclo[3.3.0]octanes, bicyclo[4.2.0]octanes, and tricyclo[4.3.1.0(3,7)]decanes has been described. Various functionalized and substituted bicyclo[2.2.2]octanes endowed with a beta,gamma-enone chromophore were synthesized via cycloaddition of in situ generated cyclohexa-2,4-dienones with electron-deficient 2pi partners and manipulation of the resulting adducts. Triplet sensitized irradiation of bridged bicyclooctenones led to synthesis of bicyclo[3.3.0]octanoids, whereas the direct irradiation furnished bicyclo[4.2.0]octanes in stereoselective fashion as a result of modulation of reactivity in excited states. Further, manipulation of the adducts led to appropriately appended and functionalized bicyclo[2.2.2]octanes that upon radical induced cyclization provided an efficient and stereoselective route to the tricyclo[4.3.1.0(3,7)]decane (isotwistane) framework of pupukeananes.     

Domino ring-opening metathesis-ring-closing metathesis of bicyclo[2.2.2]octene derivatives: scope and limitations

Domino metathesis involving ring-opening metathesis-ring-closing metathesis (ROM-RCM) of a bicyclo[2.2.2]octene derivative having an appropriate alkene chain, expected to produce a 7/6 fused bicyclic system, provided a decalin system in contrast to ROM-RCM of the corresponding bicyclo[2.2.1]heptene analogues, which as expected produced the 7/5 fused bicycles. The expected 6/7 bicyclic system could, however, be made through RCM of the elusive ROM product prepared from the same bicyclo[2.2.2]octene analogue by a nonmetathetic route. A rationale to explain the difference in reactivity pattern between these two systems toward ROM-RCM has been forwarded.     

Synthesis of porphyrin dimers fused with a benzene unit

Bicyclo[2.2.2]octadiene-connected pyrrolo-porphyrins have been prepared by an inverse-type [3+1] porphyrin synthesis of a bicyclo[2.2.2]octadiene-fused dipyrrole with a tripyrrane dicarbaldehyde. Another [3+1] porphyrin synthesis of pyrrole-connected porphyrins with the same or other tripyrrane dicarbaldehydes gave bicyclo[2.2.2]octadiene-bridged diporphyrins, the central metals and/or peripheral substituents of which were different. Thermal decomposition of the bicyclo[2.2.2]octadiene skeleton to a benzene moiety gave pi-system-fused porphyrin dimers in a highly pure form.     

Synthesis of molecular motors incorporating para-phenylene-conjugated or bicyclo[2.2.2]octane-insulated electroactive groups

The insulating role of the bicyclo[2.2.2]octane fragment has been theoretically evaluated by comparing the electronic coupling parameter (V(ab)) in 1,4-bis(ferrocenyl)benzene (1) and 1,4-bis(ferrocenyl)bicyclo[2.2.2]octane (2). The geometries were optimized by DFT and an extended Hückel calculation was performed to evaluate V(ab) by the dimer splitting method. The calculations showed a 12-fold decrease of the electronic coupling from 60 meV for 1 to 5 meV for 2. The second part describes the synthesis of two potential molecular motors with one incorporating the insulating bicyclo[2.2.2]octane fragment. These molecules are based on a ruthenium complex bearing a tripodal stator functionalized to be anchored onto surfaces. The ferrocenyl electroactive groups and the cyclopentadienyl (Cp) rotor are connected through a p-phenylene spacer (5) or through a spacer incorporating an insulating bicyclo[2.2.2]octane moiety (6).     

Diels-Alder reactions of 4-triflyloxy-2,6,6-trimethyl-2,4-cyclohexadienone. An expedient methodology for the synthesis of bicyclo[2.2.2]oct-5-en-2-ones and bicyclo[2.2.2]octa-5,7-dien-2-ones

The synthesis of 4-triflyloxy-2,6,6-trimethyl-2,4-cyclohexadienone (13), bicyclo[2.2.2]octenones 1a-j and 15a-j, and bicyclo[2.2.2]octadienones 2a-f, 6a-d, and 11a-f is described. The 2,4-cyclohexadienones 4 and 13 were used for the first time as nondimerizing and easily accessible alternatives to 2,6,6-trimethyl-2,4-cyclohexadienone 12 in Diels-Alder reactions with acetylene derivatives 5a-d to prepare the adducts 6a-d and 11a-e in excellent yields. Compounds 11a-d were initially prepared by the alcoholysis of 6a-d to afford bicyclo[2.2.2]octene-2,5-diones 7a-dfollowed by treatment of 7a-d with N-phenyltriflimide in the presence of LHMDS at -78 degrees C. Diels-Alder reaction of 13 with an acetylene equivalent, phenyl vinyl sulfoxide, was also studied. A detailed study of the Diels-Alder reactions of various olefinic dienophiles 14a-j with 13 has been carried out to furnish cycloadducts 15a-j in high yields. Reductive removal of triflyloxy group of vinyl triflates 11a-f and 15a-j was performed in the presence of [Pd(PPh(3))(2)Cl(2)-Bu(3)N-HCO(2)H] to obtain the desired bicyclo[2.2.2]octadienones 2a-f and bicyclo[2.2.2]octenones 1a-j, respectively, in good overall yields.     

4-Aminobicyclo[2.2.2]octanone Derivatives with Antiplasmodial and Antitrypanosomal Activities

4-Aminobicyclo[2.2.2]octanones were converted to their N-oxides and to 4-aminobicyclo[2.2.2]octanes. Furthermore, the 6,7-bis-(4-methoxyphenyl) analogues were synthesized. All products were screened for their activities against Trypanosoma b. rhodesiense and Plasmodium falciparum. The pharmacological results were compared with those of formerly tested bicyclo[2.2.2]octanones and bicyclo[2.2.2]octanols. Structure-activity relationships are discussed.     

4-Aminobicyclo[2.2.2]octanone Derivatives with Antiplasmodial and Antitrypanosomal Activities

Summary. 4-Aminobicyclo[2.2.2]octanones were converted to their N-oxides and to 4-aminobicyclo[2.2.2]octanes. Furthermore, the 6,7-bis-(4-methoxyphenyl) analogues were synthesized. All products were screened for their activities against Trypanosoma b. rhodesiense and Plasmodium falciparum. The pharmacological results were compared with those of formerly tested bicyclo[2.2.2]octanones and bicyclo[2.2.2]octanols. Structure-activity relationships are discussed.Received April 8, 2003; accepted April 14, 2003 Published online September 25, 2003     

The stepwise heats of hydrogenation of barrelene,an ab initio study

Ab initio Hartree-Fock calculations at the 6–31G*//3–21G level of theory are reported for bicyclo[2.2.2]-2,5,7-octatriene (barrelene), 1 , bicyclo[2.2.2]-2,5-octadiene, 2 , bicyclo[2.2.2]-2-octene, 3 , and bicyclo-[2.2.2]octane, 4 . The stepwise heats of hydrogenation of 1 were found to be 38.1, 31.8, and 28.4 kcal/mol, respectively. The unusually large heat of hydrogenation for the first double bond is attributed to the destabilizing electronic effects involving the interaction of the three double bonds of 1 .     

Experimental and computational bridgehead C-H bond dissociation enthalpies

Bridgehead C-H bond dissociation enthalpies of 105.7 ± 2.0, 102.9 ± 1.7, and 102.4 ± 1.9 kcal mol(-1) for bicyclo[2.2.1]heptane, bicyclo[2.2.2]octane, and adamantane, respectively, were determined in the gas phase by making use of a thermodynamic cycle (i.e., BDE(R-H) = ΔH°(acid)(H-X) - IE(H(·)) + EA(X(·))). These results are in good accord with high-level G3 theory calculations, and the experimental values along with G3 predictions for bicyclo[1.1.1]pentane, bicyclo[2.1.1]hexane, bicyclo[3.1.1]heptane, and bicyclo[4.2.1]nonane were found to correlate with the flexibility of the ring system. Rare examples of alkyl anions in the gas phase are also provided.     

Thermotropic copolyesters. III. Synthesis and characterization of liquid crystal copolyesters containing the bicyclo[2.2.2]octane ring system

A number of thermotropic copolyesters which contain the bicylo[2.2.2]octane ring system have been synthesized. Because of the stiffening effect of the bicyclo[2.2.2]octane group on the chain, the sebacoyl spacer was used to obtain meltable compositions.     

Retro-Diels-Alder reaction using bicyclo[2.2.2]octatriene-fused pyrrole during porphyrin synthesis

Porphyrin synthesis using 4,7-etheno-4,7-dihydro-2H-isoindole and tripyrranedicarbaldehyde gave a porphyrin derivative bearing no bicyclo[2.2.2]octatriene moiety as well as the targeted bicyclo[2.2.2]octatriene-fused porphyrin.     

Cycloaddition of cyclohexa-2,4-dienones with β-nitroacrylates: a short and efficient entry into bicyclo[2.2.2]octanes endowed with β-nitro-ester and β-amino ester functionality

Regio- and stereoselective cycloaddition of β-nitroacrylates with electron deficient cyclohexa-2,4-dienones leading to highly functionalised bicyclo[2.2.2]octanes having the β-nitroester group and their transformation to bicyclo[2.2.2]octanes having β-aminoester functionality is described.     

Polar effects and structural variation in 4-substituted 1-phenylbicyclo[2.2.2]octane derivatives: a quantum chemical study

The transmission of polar effects through the bicyclo[2.2.2]octane framework has been investigated by ascertaining how the geometry of a phenyl group at a bridgehead position is affected by a variable substituent at the opposite bridgehead position. We have determined the molecular structure of several Ph-C(CH(2)-CH(2))(3)C-X molecules (where X is a charged or dipolar substituent) from HF/6-31G and B3LYP/6-311++G molecular orbital calculations and have progressively replaced each of the three -CH(2)-CH(2)- bridges by a pair of hydrogen atoms. Thus the bicyclo[2.2.2]octane derivatives were changed first into cyclohexane derivatives in the boat conformation, then into n-butane derivatives in the anti-syn-anti conformation, and eventually into assemblies of two molecules, Ph-CH(3) and CH(3)-X, appropriately oriented and kept at a fixed distance. For each variable substituent the deformation of the benzene ring relative to X = H remains substantially the same even when the substituent and the phenyl group are no longer connected by covalent bonds. This provides unequivocal evidence that long-range polar effects in bicyclo[2.2.2]octane derivatives are actually field effects, being transmitted through space rather than through bonds. Varying the substituent X in a series of Ph-C(CH(2)-CH(2))(3)C-X molecules gives rise to geometrical variation (relative to X = H) not only in the benzene ring but also in the bicyclo[2.2.2]octane cage. The two deformations are poorly correlated. The rather small deformation of the benzene ring correlates well with traditional measures of long-range polar effects in bicyclo[2.2.2]octane derivatives, such as sigma(F) or sigma(I) values. The much larger deformation of the bicyclo[2.2.2]octane cage is controlled primarily by the electronegativity of X, similar to deformation of the benzene ring in Ph-X molecules. Thus the field and electronegativity effects of the substituent are well separated and can be studied simultaneously, as they act on different parts of the molecular skeleton.     

Rate acceleration of anionic oxy-cope rearrangements induced by an additional unsaturation

[reaction: see text] In sharp contrast to their isopropyl counterparts, a variety of (Z)-isopropenyl tertiary bicyclo[2.2.2]octenols undergo facile anionic oxy-Cope rearrangements allowing the stereoselective incorporation of an isopropenyl group into polycyclic skeletons such as the tricyclic system of vinigrol, bicyclo[5.3.1]undecane, and cis-decalin frameworks. This rate acceleration is probably due to the stabilization of the transition state by the additional unsaturation on the terminal position.     

Thermotropic homopolyester. I. Synthesis and characterization of homopolyesters containing the mesogenic unit,bicyclo[2.2.2]oct-2-ene

Homopolyesters based on bicyclo[2.2.2]oct-2-ene as a mesogenic group were prepared and characterized. The use of bicyclo[2.2.2]oct-2-ene in these homopolyesters lowered the symmetry of the resulting systems enough to lead to the observation of melting behavior.     

Substituent effects on the acidity of weak acids. 1. Bicyclo[2.2.2]octane-1-carboxylic acids and bicyclo[1.1.1]pentane-1-carboxylic acids

The acidities of 3- and 4-substituted bicyclooctane-1-carboxylic acids and 3-substituted bicyclo[1.1.1]pentane-1-carboxylic acids have been calculated at the MP2/6-311++G** theoretical level. There is good agreement between the calculated and observed gas-phase acidities. The acidities of the 4-substituted bicyclooctane acids were found to be linearly dependent on the C-X bond dipoles, as expected from a field effect. The substituents had a negligible effect on the electron density at C1. The difference in acidity between 4-chlorobicyclo[2.2.2]octane-1-carboxylic acid and the parent acid (6.2 kcal/mol) is reproduced by the Kirkwood-Westheimer treatment of substituent effects on acidity, but only if the bicyclooctane ring is given an effective dielectric constant of unity. The acidities of the 3-substituted bicyclooctane acids are linearly related to the corresponding 4-substituted acids with a slope of 0.9. The acidities of the 3-substituted bicyclo[1.1.1]pentane-1-carboxylic acids are linearly related to the C-X bond dipoles for this ring system (which are different than those for the bicyclooctanes), and they are also linearly related to the acidity of the 4-substituted bicyclo[2.2.2]octanecarboxylic acids with a slope of 1.34. The larger slope is due to the smaller bridgehead-bridgehead distance in the bicyclopentane ring than in bicyclo[2.2.2]octane.     

Cycloaddition of cyclohexa-2,4-dienones with electron deficient 2 pi partners: a novel and stereoselective route to functionalized bicyclo[2.2.2]octenones

A novel route to functionalised bicyclo[2.2.2]octenones via pi 4s + pi 2s cycloaddition of cyclohexa-2,4-dienones with electron deficient 2 pi partners, and crystal structure of 1,7-dimethyl-5-hydroxy-5-chloromethyl-2-carboethoxy bicyclo[2.2.2]oct-7-ene-6-one, is reported.