Beiträge zur Chemie des Phosphors. 123. Synthese und Eigenschaften der Diphosphagermirane (t-BuP)2GePh2 und (t-BuP)2GeEt2

Contributions to the Chemistry of Phosphorus. 123. Synthesis and Properties of the Diphosphagermiranes (t-BuP)₂GePh₂ and (t-BuP)₂GeEt₂ The first three-membered P₂Ge heterocycles, 1,2-di-tert-butyl-3, 3-diphenyl-1, 2, 3-diphosphagermirane, (t-BuP)₂GePh₂ (1) , and 1, 2-di-tert-butyl-3, 3-diethyl-1, 2, 3-diphosphagermirane, (t-BuP)₂GeEt₂ (2) , were synthesized by [2+1] cyclocondensation reactions of K(t-Bu)P—P(t-Bu)K with diphenylgermanium dichloride and diethylgermanium dichloride, respectively. The four-, five-, and six-membered cyclogermaphosphanes (t-BuP)₂(GePh₂)₂ (3) , (t-BuP)₃GeR₂ ( 6 R = Ph; 7 R = Et), (t-BuP)₄GePh₂ (5) and (t-BuP)₄(GePh₂)₂ (4) as well as (t-BuP)₄ are formed as by-products. The diphosphagermiranes 1 and 2 could be isolated in 93 and 100% purity, respectively, and were unambiguously characterized as compounds with a cyclic P₂Ge skeleton. The ³¹P-NMR parameters of the cyclogermaphosphanes 3—7 are reported.     

Beiträge zur Chemie des Phosphors. 104. Synthese und Eigenschaften von 1,3-Dihalogen-1,2,3-tritert-butyltriphosphanen (t-BuP)3X2, X = Cl,Br, I

Contributions to the Chemistry of Phosphorus. 104. Synthesis and Properties of 1,3-Dihalogen-1,2,3-tri-tert-butyltriphosphanes (t-BuP)₃X₂, X = Cl, Br, I The halogenating ring-cleavage of tri-tert-butyl-cyclotriphosphane, (t-BuP)₃, by iodine, bromine or phosphorus(V)bromide as well as phosphorus(V)chloride leads to the first 1,3-dihalogen-1,2,3-triorganyltriphosphanes (t-BuP)₃I₂ ( 1 ), (t-BuP)₃Br₂ ( 2 ), and (t-BuP)₃Cl₂ ( 3 ). The 1,2-dihalogen-1,2-di-tert-butyldiphosphanes (t-BuP)₂I₂ ( 4 ), (t-BuP)₂Br₂ ( 6 ), and (t-BuP)₂Cl₂ ( 9 ) as well as the dihalogen-tert-butylphosphanes t-BuPI₂ ( 5 ), t-BuPBr₂ ( 7 ), and t-BuPCl₂ ( 10 ) are formed as by-products. Moreover, the reaction of (t-BuP)₃ with PBr₅ leads to 1-bromo-2,3,4-tri-tert-butyl-cyclo-tetraphosphane, (t-BuP)₃(PBr) ( 8 ). The compounds 1 and 3 could be isolated in a pure state and were characterized in all details. 3 is a reMarkably stable open-chain triphosphane.     

M2B5 or M2B4? A Reinvestigation of the Mo/B and W/B System

The literature states different compositions (M/B = 1:2 vs. 2:5) and structures for diborides of molybdenum and tungsten. Using X‐ray and neutron powder diffraction as well as energy and wavelength dispersive electron microprobe analysis, the Mo/B and W/B systems were now reinvestigated. Molybdenum diboride crystallizes as a stoichiometric compound Mo₂B₄ (formerly described as Mo₂B₅) in space group (No. 166, a, b = 3.01375(2) Å, c = 20.9541(3) Å), and as a non‐stoichiometric compound MoB_2?x (formerly described as MoB₂) in P6/mmm (No. 191, a, b = 3.043(2) Å, c = 3.067(2) Å), whereas stoichiometric tungsten diboride W₂B₄ (formerly described as W₂B₅) is found to crystallize in space group P6₃/mmc (No. 194, a, b = 2.9864(4) Å, c = 13.896(2) Å). These results seem to be supported by DFT calculations which show the instability of a hypothetic W₂B₅.     

A New Route to Vitamin E Key‐Intermediates by Olefin Cross‐Metathesis

Ru‐Catalyzed olefin cross‐metathesis (CM) has been successfully applied to the synthesis of several phytyl derivatives ( 2b, 2d – f, 3b ) with a trisubstituted C?C bond, as useful intermediates for an alternative route to α‐tocopheryl acetate (vitamin E acetate; 1b ) (Scheme 1). Using the second‐generation Grubbs catalyst RuCl₂(C₂₁H₂₆N₂)(CHPh)PCy₃ (Cy = cyclohexyl; 4a ) and Hoveyda–Grubbs catalyst RuCl₂(C₂₁H₂₆N₂){CH‐C₆H₄(O‐ⁱPr)‐2} ( 4b ), the reactions were performed with various C‐allyl ( 5a – f, 7a,b ) and O‐allyl ( 8a – d ) derivatives of trimethylhydroquinone‐1‐acetate as substrates. 2,6,10,14‐Tetramethylpentadec‐1‐ene ( 6a ) and derivatives 6c – e of phytol ( 6b ) as well as phytal ( 6f ) were employed as olefin partners for the CM reactions (Schemes 2 and 5). The vitamin E precursors could be prepared in up to 83% isolated yield as (E/Z)‐mixtures.     

Strukturelle Vielfalt im pseudo‐ternären System M/Ge/I: α‐[NMe(nBu)3](GeI4)I, β‐[NMe(nBu)3](GeI4)I und [ImMe(nBu)][N(nBu)4](GeI4)3I2

By reaction of GeI₄, [N(nBu)₄]I as iodide donor, and [NMe(nBu)₃][N(Tf)₂] as ionic liquid, reddish‐black, plate‐like shaped crystals are obtained. X‐ray diffraction analysis of single crystals resulted in the compositions ;alpha;‐[NMe(nBu)₃](GeI₄)I (Pbca; a = 1495.4(3) pm; b = 1940.6(4) pm; c = 3643.2(7) pm; Z = 16) and β‐[NMe(nBu)₃](GeI₄)I (Pn; a = 1141.5(2) pm; b = 953.6(2) pm; c = 1208.9(2) pm; β = 100.8(1)°; Z = 2). Depending on the reaction temperature, the one or other compound is formed selectively. In addition, the reaction of GeI₄ and [N(nBu)₄]I, using [ImMe(nBu)][BF₄] (Im = imidazole) as ionic liquid, resulted in the crystallization of [ImMe(nBu)][N(nBu)₄](GeI₄)₃I₂ (P2₁/c; a = 1641.2(3) pm; b = 1903.0(4) pm; c = 1867.7(4) pm; β = 92.0(1)°; Z = 4). The anionic network of all three compounds is established by molecular germanium(IV)iodide, which is bridged by iodide anions. The different connectivity of (GeI₄–I^–) networks is attributed to the flexibility of I^– regarding its coordination and bond length. Here, a [3+1]‐, 4‐ and 5‐fold coordination is first observed in the pseudo‐ternary system M/Ge/I (M: cation).     

Beiträge zur Chemie des Phosphors. 159. Über die Reaktion des Diphosphaborirans (t-BuP)2BN(i-Pr)2 mit Kalium bzw. Kaliumnaphthalid

Contributions to the Chemistry of Phosphorus. 159. On the Reaction of the Diphosphaborirane (t-BuP)₂BN(i-Pr)₂ with Potassium or Potassium Naphthalenide The reaction of (t-BuP)₂BN(i-Pr)₂ with potassium or K-naphthalenide in tetrahydrofuran leads to K(t-Bu)P? ;BN(i-Pr)₂? P(t-Bu)K ( 1 ) via P? ;P bond cleavage of the three-membered ring skeleton. Above ? 78°C 1 changes into the asymmetric compound K(t-Bu)P? ;P(t-Bu)? BHN(i-Pr)₂ ( 2 ). In dimethoxyethane additionally the monometallated diphosphaborirane K(t-Bu)P₂BN(i-Pr)₂ ( 3 ) is formed. 1 and 3 , which could be isolated free from other phosphorus containing compounds, as well as the corresponding silylphosphanes Me₃Si(t-Bu)P? ;BN(i-Pr)₂? ;P(t-Bu)SiMe ₃ ( 4 ) and Me₃Si(t-Bu)P₂BN(i-Pr)₂ ( 5 ) were characterized by NMR spectroscopy. Protolysis of 3 or 5 leads to a decomposition of the three-membered ring skeleton with formation of H(t-Bu)P? ;PH₂.     

Synthesis and Molecular Structure of a Hexaaminodistannane Comprising two Identical Triaminotin Subunits

Reaction of the previously characterized lithium stannate [HC{SiMe₂N(4‐CH₃C₆H₄)}₃SnLi(thf)₃] ( 1 ) with AgCl afforded the corresponding distannane [HC{SiMe₂N(4‐CH₃C₆H₄)}₃Sn]₂ ( 2 ) as the product of an oxidative coupling in good yield. Its [2, 2, 2]bicyclooctane‐related cage structure, comprising the trisilylmethane unit and the triamido‐tin fragment, as well as the Sn‐Sn bond (2.8204(4)Å) were established by single crystal structure analysis: Space group group P2₁/n, Z = 2, lattice dimensions at 120(2) K: a = 13.6515(3), b = 15.8391(3), c = 16.3522(3)Å, β = 102.7760(10)°, R₁ = 0.0347.     

Thermo‐ and pH‐Responsive Micelles of Poly(acrylic acid)‐block‐Poly(N,N‐diethylacrylamide)

Summary: The bis‐hydrophilic block copolymer, poly(acrylic acid)₄₅‐block‐poly(N,N‐diethylacrylamide)₃₆₀, was obtained after hydrolysis of poly(tert‐butyl acrylate)₄₅‐block‐poly(N,N‐diethylacrylamide)₃₆₀, synthesized by sequential anionic polymerization of tert‐butyl acrylate (tBA) and N,N‐diethylacrylamide (DEAAm) in the presence of Et₃Al. The polymer is stimuli‐sensitive with respect to both pH and temperature in aqueous solution, reversibly forming spherical crew‐cut micelles with PDEAAm‐core (〈R_h〉_z = 21.5 nm) under alkaline conditions for T > 35 °C as well as inverse star‐like micelles with an expanded PAA‐core (〈R_h〉_z = 43.8 nm) under acidic conditions for T < 35 °C, as indicated by dynamic light scattering.

Modes of micelle formation for poly(acrylic acid)₄₅‐block‐poly(N,N‐diethylacrylamide)₃₆₀ in aqueous solution depending on the pH and temperature.     

Effect of co-catalyst system on α-olefin polymerization with rac- and meso-[dimethylsilylenebis(2,3,5-trimethyl-cyclopentadienyl)]zirconium dichloride

Propene, 1-butene and 1-hexene polymerization was conducted with a mixture of rac- and meso-[dimethylsilylenebis((2,3,5-tetramethyl-cyclopentadienyl))]zirconium dichloride (Me₂Si(2,3,5-Me₃Cp)₂ZrCl₂) ( 1 ) combined with methylaluminoxane (MAO), triethylaluminium (AlEt₃)/triphenylcarbenium tetrakis(pentafluorophenyl)borate (Ph₃CB(C₆F₅)₄) ( 2 ) and triisobutylaluminium (AliBu₃)/Ph₃CB(C₆F₅)₄, respectively, as co-catalyst systems. The ratios of polymerization rates R_p(rac)/R_p(meso) were changed with the combined cocatalysts. It was found that in the case of using trialkylaluminium/ 2 as co-catalyst R_p(rac)/R_p(meso) is lower than when using MAO in any kind of α-olefin polymerization.     

Creating Iron– and Rhenium–Bismuth Bonds by Reactions with Organometallic Hydrides

While addition of [Cp₂ReH] to [Bi(OtBu)₃] leads to an equilibrium containing [Cp₂Re‐Bi(OtBu)₂], [{Cp₂Re}₂Bi(OtBu)], tBuOH and [CpRe(μ‐η⁵,η¹‐C₅H₄)Bi–ReCp₂], in the presence of water [{(Cp₂Re)₂Bi}₂O] ( 1 ) is formed selectively. Also [FpH] [Fp = (η⁵‐C₅H₅)(CO)₂Fe] can be employed as a precursor to form heterometallic bismuth compounds. Synthesis of [FpBi{OCH(CF₃)₂}₂]₂ ( 5 ) can be achieved by reaction of [FpH] with [Bi{OCH(CF₃)₂}₃(thf)]₂ and carboxylates [FpBi(O₂CR)₂]₂ are generated upon treatment of [FpH] with [Bi(O₂CR)₃] (R = CH₃, tBu). While the compounds [Fp‐Bi(O₂CR)₂]₂ can also be obtained from reactions with Fp‐Fp, they are formed far more readily using [FpH] as the precursor. They typically crystallize as dimers, like the alkoxide 5 . A monomeric compound of the type [Fp‐BiX₂] ( 6 ) could be isolated for X = thd (tetramethylheptanedionate), that is, after the reaction of [FpH] with [Bi(thd)₃]. Altogether, the results demonstrate the potential of [FpH] as a precursor for [Fp‐BiX₂] compounds, which are formed in reactions with bismuth alkoxides, carboxylates and diketonates.     

Leitfähigkeitsmessungen an Tetraethylammoniumhexacyanoferrat(III) und Tetrabutylammoniumhexacyanoferrat(III) in verschiedenen Lösungsmitteln

Based on conductivity measurements, the dissociation of tetraalkylam-moniumhexacyanoferrates(III) in water, ethanol, formamide,N-methylformamide,N,N-dimethylformamide, propylenecarbonate and acetonitrile is discussed. Interactions of the solvent as donor and as acceptor, the latter interaction being dominant, with (et ₄N)₃Fe(CN)₆ and (bu ₄N)₃Fe(CN) were found to be important factors in the formation of solvated ions.

     

Borderline of hydrogen bonding of silanols

Two new silanols bearing very bulky silyl groups, (i-Pr₃ Si)₃SiOH and (t − BuMe₂Si)₃SiOH were prepared by peracidoxidation of their respective silanes. The X − ray crystallographic analysis revealed that (t − BuMe₂Si)₃ SiOH forms a dimeric structure with hydrogen bonding, while (i − Pr₃ Si)₃ SiOH exists as a monomer in the crystal. The effects of the size of the substituents as well as the reactivity of these silanols are discussed.     

Beiträge zur Chemie des Phosphors. 138. P5(t-Bu)4H – das erste Derivat von iso-P5H5

Contributions to the Chemistry of Phosphorus. 138. P₅(t-Bu)₄H — the First Derivative of iso-P₅H₅ The thermolysis of 1,2-di-tert-butyldiphosphane, H(t-Bu)P? P(t-Bu)H, yields under suitable conditions the compound P₅(t-Bu)₄H ( 1 ) as the main product. Besides, the tert-butylphosphanes t-BuPH₂, P₆(t-Bu)₅H ( 2 ), H₂(t-BuP)₃, and (t-BuP)₄ are formed. 1 has been isolated in the pure state and structurally characterized as 1-(tert-butylphosphino)-2,3,4-tri-tert-butyl-cyclotetraphosphane. Hence, compound 1 is a derivative of iso-P₅H₅ with a branched phosphorus skeleton built up by a four-membered ring and a phosphorus side chain.     

Copper Bismuth Chalcogenide Halogenides with Extensively Disordered and Mobile Copper(I) Cations

A new family of quaternary phases with the general sum formula Cu_3+δBi_5–δSe_8–2δX_2+2δ (X = Cl, Br) was discovered by slow cooling of high temperature melts. Cu_3.58(1)Bi_4.42(1)Se_6.84(2)Cl_3.16(2) (δ = 0.58) and Cu_4.52(1)Bi_3.48(1)Se_4.96(2)Br_5.04(2) (δ = 1.52) crystallize isostructural in the orthorhombic space group type Pnnm with a = 1332.3(1)/1340.2(3) pm, b = 1683.7(2)/1717.2(1) pm, and c = 406.2(1)/407.1(2) pm. The new structure type resembles in some aspects the hollandite as well as the pavonite type. A framework of face‐ and edge‐sharing anion polyhedra around Bi³⁺ cations hosts Cu⁺ cations. The characteristic motif is an infinite band of polyhedra that has the width of five polyhedra, with three octahedra being enclosed by capped trigonal prisms. The octahedrally coordinated Bi³⁺ cations are partially substituted by Cu⁺ (in octahedra faces), while Se^2– anions are replaced by X^–. The sulfide iodide Cu_3.33(2)Bi₂S_3.33(2)I_2.67(2) crystallizes in the monoclinic space group C2/m with a = 2803.6(9) pm, b = 409.9(1) pm, c = 1058.0(3) pm, and β = 110.68(2)°. Double strands of face‐sharing [BiS_1/1S_2/2I_4/4] as well as [BiS_3/3I_2/2(S_0.33/I_0.67)_2/2] polyhedra run along [010]. In between them, the Cu⁺ cations are spread over numerous closely spaced sites. They define a ladder‐shaped continuous path for ion conduction along [010].     

Generation and capture of methyl(vinyl)silanone

Methyl(vinyl)dichlorosilane reacts with DMSO in the presence of hexamethyldisiloxane to give the corresponding linear oligosiloxanes of the general formula Me₃Si(OSiMeVin) _n OSiMe₃ (n=1–6) as well as MeSi(OSiMe₃)₃ and Me₃Si(MeOSiVin) _m OSi(OSiMe₃)(Me)OSiMe₃ (m=1–2). The same reaction in the presence of chlorotrimethylsilane results in oligomers of the general formula Me₃Si(OSiMeVin) _n Cl (n=1–3). A possible scheme of their formation is discussed. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1614–1616, August, 1998.     

Beiträge zur Chemie des Phosphors. 129. Synthese und Eigenschaften der Phospha-germa-cyclobutane (t-BuP)2(GePh2)2 und (t-BuP)3GePh2

Contributions to the Chemistry of Phosphorus. 129. Synthesis and Properties of the Phospha-germa-cyclobutanes (t-BuP)₂(GePh₂)₂ and (t-BuP)₃GePh₂ The phospha-germa-cyclobutanes 1,2-di-tert-butyl-3,3,4,4-tetraphenyl-1,2-diphospha-3,4-digerma-cyclob utane, (t-BuP)₂(GePh₂)₂ ( 1 ), and 1,2,3-tri-tert-butyl-4,4-diphenyl-1,2,3-tri-phospha-4-germa-cyclobutan e, (t-BuP)₃GePh₂ ( 2 ), are obtained as main-products of the cyclocondensation of K(t-Bu)P? P(t-Bu)K with Ph₂GeCl₂ under certain reaction conditions. 1 and 2 could be isolated in the pure state and were clearly characterized as the first four-membered P₂Ge₂ and P₃Ge heterocycles, respectively.     

Telluro- and seleno-bridged TiIV-MII (M = Ni,Pd, Pt) heterobimetallic complexes

Summary Heterobimetallic complexes of the types [Cp₂Ti(-EAr)₂-M(dppe)] (ClO₄)₂ [(1)–(4); M, E = Ni, Te (1); Ni, Se (2); Pt, Te (3); Pt, Se (4); Ar = Ph (a), C₆H₄-4-Me (b), C₆H₄-4-OMe (c), C₆H₄-4-OEt (d)] and [Cp₂Ti(-TeAr)₂-MCl ₂] [M = Pd (5), Pt (6)] were obtained by the reactions of Cp₂Ti(EAr)₂ with M(dppe)(ClO₄)₂ and M(PhCN)₂Cl₂, respectively. While (1), (5) and (6) are stable in the solid state as well as in solution, (2)–(4) undergo dissociation to M(dppe)(EAr)₂ and Cp₂Ti(ClO₄)₂ in solution, as shown by multinuclear (³¹P{¹H},¹⁹⁵Pt{¹H}, ¹²⁵Te{¹H}) n.m.r. studies. The reaction of Cp₂Ti(SeAr)₂ with M(PhCN)₂Cl₂, however, leads to the formation of Cp₂TiCl₂ and a polymeric material [M(SeAr)₂] _n .     

Synthesis,Crystal Structure,and Optical Properties of (CH3NH3)2CoX4 (X = Cl,Br, I,Cl0.5Br0.5, Cl0.5I0.5, Br0.5I0.5)

The reaction of methylammonium halides and cobalt halides yielded the organic‐inorganic hybrid compounds of general formula (CH₃NH₃)₂CoX₄. By varying the different halides, we were able to synthesize the whole row from Cl to I as well as some mixed halides compounds and to determinate the crystal structures. (CH₃NH₃)₂CoX₄ (X = Cl, Br, Cl_0.5Br_0.5, Br_0.5I_0.5) crystallize isotypic to (CH₃NH₃)₂HgCl₄ in space group P2₁/c with Z = 4 [X = Cl: a = 7.6483(9), b = 12.6885(18), c = 10.8752(12) Å, β = 96.639(9)°; X = Cl_0.5Br_0.5: a = 7.8271(9), b = 12.9543(9), c = 11.1007(11) Å, β = 96.320(8)°; X = Br: a = 7.9782(2), b = 13.1673(2), c = 11.2602(2) Å, β = 96.3260(10)° and X = Br_0.5I_0.5: a = 8.2435(12), b = 13.645(2), c = 11.5856(18) Å, β = 95.54(2)°]. The mixed halides show a statistic distribution in both cases. In (CH₃NH₃)₂CoCl₂I₂ an ordered variant is realized representing a new structure type [C2/m, Z = 4, a = 18.808(4), b = 7.3604(7), c = 10.4109(17) Å, β = 120.364(13)°]. (CH₃NH₃)₂CoI₄ crystallizes again isotypic to the respective mercury compound [(CH₃NH₃)₂HgCl₄] [Pbca, Z = 8, a = 10.9265(5), b = 12.1552(5), c = 20.9588(9) Å]. All structures are build up by inorganic tetrahedral [CoX₄]^2– anions and organic (CH₃NH₄)⁺ cations. Additionally the Raman spectra as well as the optical reflectance spectra are discussed.     

Syntheses and Catalytic Hydrogenation Performance of Cationic Bis(phosphine) Cobalt(I) Diene and Arene Compounds

Chloride abstraction from [(R,R)‐(^iPrDuPhos)Co(μ‐Cl)]₂ with NaBAr^F₄ (BAr^F₄=B[(3,5‐(CF₃)₂)C₆H₃]₄) in the presence of dienes, such as 1,5‐cyclooctadiene (COD) or norbornadiene (NBD), yielded long sought‐after cationic bis(phosphine) cobalt complexes, [(R,R)‐(^iPrDuPhos)Co(η²,η²‐diene)][BAr^F₄]. The COD complex proved substitutionally labile undergoing diene substitution with tetrahydrofuran, NBD, or arenes. The resulting 18‐electron, cationic cobalt(I) arene complexes, as well as the [(R,R)‐(^iPrDuPhos)Co(diene)][BAr^F₄] derivatives, proved to be highly active and enantioselective precatalysts for asymmetric alkene hydrogenation. A cobalt–substrate complex, [(R,R)‐(^iPrDuPhos)Co(MAA)][BAr^F₄] (MAA=methyl 2‐acetamidoacrylate) was crystallographically characterized as the opposite diastereomer to that expected for productive hydrogenation demonstrating a Curtin–Hammett kinetic regime similar to rhodium catalysis.     

Preparation and Crystal Structures of Ruthenium and Osmium Oxide Tetrahalides

RuOF₄ as the highest valence oxide fluoride exist as a molecular compound (a = 606.0(1), b = 836.1(1), c = 626.3(1) pm, β = 91.637(3), Z = 4; P2₁/n) as well as fluorine bridged polymer (a = 547.7(2), b = 928.5(3), c = 1252.4(3) pm, Z = 8, P2₁2₁2₁). A reproducible method for pure, deep blue OsOF₄ is given. Pure OsOF₄‐I is isostructural to the fluorine bridged polymeric RuOF₄ (a = 554.6(1), b = 955.4(2), c = 1278.4(2), Z = 8, P2₁2₁2₁). OsOF₄‐II is also a fluorine bridged polymer (a = 537.8(2), b = 1274.8(4), c = 555.2(2), β = 117.716(6)°, Z = 4, P2₁/c). OsOCl₄ again is a molecular species (a = 938.9(2), b = 561.3(1), c = 1192.0(2), β = 109.944(4)°, Z = 4, P2₁/c).