Synthesis and characterisation of novel functional polyolefin containing sulfonic acid groups

The strong polar group, sulfonic acid, has successfully been introduced into ethylene/allylbenzene copolymers without degradation or crosslinking via chlorosulfonation reaction with chlorosulfonic acid as a chlorosulfonating agent in 1,1,2,2-tetrachloroethane followed by hydrolysis. The degree of sulfonation (DS) can be easily controlled by changing the ratio of chlorosulfonic acid to the pendant phenyls of the copolymer. The microstructure of sulfonated copolymers were unambiguously revealed by ¹H NMR and ¹H-¹H COSY spectral analyses, which indicates that all the sulfonation reactions exclusively took place at the para-position of the aromatic rings. The thermal behaviors were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). DSC data exhibit a systematic trend of melting temperature increasing with DS. TGA data of sulfonated copolymers show an increase in degradation temperature from 444 to 460 °C compared to the received copolymer. Sulfonated copolymers also show an additional minor loss of mass at approximately 261 °C, which is not observed in the received copolymer. The wetting properties of the sulfonated copolymers were also evaluated by contact angle measurement, and a notable increase in surface hydrophilicity was identified.     

Synthesis and characterization of novel polybenzimidazoles bearing pendant phenoxyamine groups

A novel aromatic diacid, 3, 5‐dicarboxyl‐4′‐amino diphenyl ether, containing pendant phenoxy amine group was synthesized. Homo‐ and co‐polybenzimidazoles containing different content of pendant phenoxyamine groups were synthesized by condensation of 3,3′‐diaminobenzidine with this acid and a mixture of this acid and isophthalic acid in different ratio in polyphosphoric acid. Copolybenzimidazoles with structural variations were also synthesized based on this acid and pyridine dicarboxylic acid, terephthalic acid, adipic acid, or sebacic acid. The polymers have good solubility in polar aprotic solvents and strong acids and they form tough flexible films by solution casting. The polymers were characterized by different instrumental techniques (FTIR, TGA, DSC, XRD, etc.) and for solvent solubility, mechanical properties, inherent viscosity, and proton conductivity. The inherent viscosities of the polymers vary in the range of 0.62–1.52 dL/g. They have high thermal stability up to 475–506 °C (IDT) in nitrogen, high glass transition temperatures (T_g) ranging from 313 to 435 °C and good tensile strength ranging from 58 to 125 MPa. Proton conductivity of homo polymer is 3.72 × 10^?3 S/cm at 25 °C and 2.45 × 10^?2 S/cm at 200 °C © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5776–5793, 2008     

Synthesis and solid-state NMR characterization of cubic mesoporous silica SBA-1 functionalized with sulfonic acid groups

Well-ordered cubic mesoporous silicas SBA-1 functionalized with sulfonic acid groups have been synthesized through in situ oxidation of mercaptopropyl groups with H(2)O(2) via co-condensation of tetraethoxysilane (TEOS) and 3-mercaptopropyltrimethoxysilane (MPTMS) templated by cetyltriethylammonium bromide (CTEABr) under strong acidic conditions. Various synthesis parameters such as the amounts of H(2)O(2) and MPTMS on the structural ordering of the resultant materials were systematically investigated. The materials thus obtained were characterized by a variety of techniques including powder X-ray diffraction (XRD), multinuclear solid-state Nuclear Magnetic Resonance (NMR) spectroscopy, (29)Si{(1)H} 2D HETCOR (heteronuclear correlation) NMR spectroscopy, thermogravimetric analysis (TGA), and nitrogen sorption measurements. By using (13)C CPMAS NMR technique, the status of the incorporated thiol groups and their transformation to sulfonic acid groups can be monitored and, as an extension, to define the optimum conditions to be used for the oxidation reaction to be quantitative. In particular, (29)Si{(1)H} 2D HETCOR NMR revealed that the protons in sulfonic acid groups are in close proximity to the silanol Q(3) species, but not close enough to form a hydrogen bond.     

Microdetermination of alkoxyl groups in sulfonic acid esters

Summary It was shown that the developed modification of the Zeisel-Vieböck method can be used for the microdetermination of the alkoxyl groups present in sulfonic acid esters. A mixture of potassium iodide and orthophosphoric acid is used to decompose the alkoxy compound.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimisheskaya, No. 7, pp. 1288–1289, July, 1965     

Synthesis and characterization of proton‐conducting copolyimides bearing pendant sulfonic acid groups

A series of sulfonated copolyimides (co‐SPIs) bearing pendant sulfonic acid groups were synthesized from 1,4,5,8‐naphthalenetetracarboxylic dianhydride (NTDA), bis(3‐sulfopropoxy) benzidines (BSPBs), and common nonsulfonated diamines via statistical or sequenced polycondensation reactions. Membranes were prepared by casting their m‐cresol solutions. The co‐SPI membrane had a microphase‐separated structure composed of hydrophilic and hydrophobic domains, but the connecting behavior of hydrophilic domains was different from that of the homo‐SPIs. The co‐SPI membranes displayed clear anisotropic membrane swelling in water with negligibly small dimensional changes in the plane direction of the membrane. With water uptake values of 39–94 wt %, they showed dimensional changes in membrane thickness of about 0.11–0.58, which were much lower than those of homo‐SPIs. The proton conductivity σ values of co‐SPI membranes with ion exchange capacity values ranging from 1.95–2.32 meq/g increased sigmoidally with increasing relative humidity. They displayed σ values of 0.05–0.16 S/cm at 50 °C in liquid water. Increasing temperature up to 120 °C resulted in further increase in proton conductivity. The co‐SPI membranes showed relatively good conductivity stability during the aging treatment in water at 100 °C for 300 h. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1545–1553, 2005     

Preparation and properties of polybenzimidazoles containing cardo groups

Several polybenzimidazoles containing cardo groups were prepared: A cardodicarboxylic acid, 9,9-bis(4-carboxyphenyl)fluorene, and two cardotetramines, 9,9-bis(3,4-diaminophenyl)fluorene and 9,9-bis(3,4-diaminophenyl)10-anthrone. The cardodicarboxylic acid was condensed with aromatic tetramines and the cardotetramines were condensed with aromatic dicarboxylic acids. Prior to polymer synthesis two model compounds, 9,9-bis[4,(2-benzimidazolyl)phenyl]fluorene and 2,2′-diphenyl-5,5′-(9,9-fluorenediyl)-bibenzimidazole were prepared and characterized by spectral methods. The polymers were obtained in 60–70% yield and showed reduced viscosity in the range of 0.7–1.1 dL/g. They were soluble in dimethyl formamide (DMF) and chlorinated solvents like tetrachlorethane. The thermal stabilities of these cardopolymers were superior to noncardopoly-benzimidazoles.     

Synthesis and properties of new polybenzimidazoles and N-phenyl polybenzimidazoles with flexibilizing spacers on the polymer backbone

Several new polybenzimidazoles (PBIs) and N-phenyl PBIs were synthesized by high temperature solution polycondensation techniques. Three different tetramine hydrochlorides and one N-phenyl tetramine hydrochloride were condensed independently with p-phenylenedioxydiacetic acid (PDDA), 2,2′-[isopropylidene bis(p-phenyleneoxy)] diacetic acid (bisacid A₂) and 2,2′-[sulfonyl bis(p-phenyleneoxy)] diacetic acid (bisacid S) in polyphosphoric acid (PPA) at high temperatures. The polymers were obtained in 55–65% yield with inherent viscosities in the range 0.58–0.96 dL/g. Four model benzimidazoles (MBI) were also synthesized to confirm the formation of polybenzimidazoles. The PBIs and MBIs were characterized by infrared spectroscopy and elemental analysis. The properties of the polymers such as solubility, density, crystallinity, and thermal, thermoxidative, and isothermal stabilities were studied.     

碳-硅复合介孔磺酸催化剂的制备及其在缩醛(酮)反应中的应用

采用浸渍法将糠醇负载在铝改性的SBA-15介孔孔道中,经550℃不完全碳化制备了结构规整、含多苯环的中空管状硅碳复合介孔材料.结果表明,通过温和磺酸化作用可使磺酸基团成功取代在多苯环上,其酸量随着多苯环涂层厚度变化在0.38~0.84 mmol/g范围内可控调变.相比于蔗糖作为糖源的复合固体酸,所制碳多苯环-硅酸催化剂具有中空碳纳米管堆积的类似CMK-5介孔结构,以及较大的反应空间、稳定的机械性能、较高的比表面和大量可以接触的质子酸中心,因而在大分子缩醛(酮)反应中表现了良好的催化性能.     

Synthesis and surface properties of fluorinated block copolymers containing sulfonic groups

A series of fluorinated block copolymers with different fluorinated block lengths and compositions were synthesized by atom transfer radical polymerization (ATRP), and then the block copolymers containing sulfonic groups with various sulfonation levels were successfully prepared further via a sulfonation reaction. These well‐defined block copolymers were characterized by means of Fourier transform infrared (FTIR), ¹H‐nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC). The surface activities of the fluorinated block copolymers containing sulfonic groups in N‐methyl pyrrolidone solution and the surface properties of the films prepared from such a solution were examined, and the experimental results showed that the fluorinated block copolymers exhibited a high surface activity in solution and quite a low solid surface energy of films, even though they contain hydrophilic sulfonic groups. The critical surface tensions of these copolymers were estimated and were comparable to that of polytetrafluoroethylene. Even more interestingly, the surface activities of the block copolymers containing sulfonic groups or sodium sulfonate groups in aqueous solution were also measured. It was found that the surface activity in aqueous solution was weaker than that in N‐methyl pyrrolidone solution and depended on both the length of the fluorinated block and the sulfonation level of the block copolymers. The surface properties of the films prepared from the block copolymers in aqueous solution were tested, and most of these films exhibited a hydrophilic surface property. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4809–4819, 2004     

Synthesis and characterization of chiral liquid‐crystalline polysiloxanes containing fluorinated units and sulfonic acid groups

Chiral side‐chain liquid‐crystalline polysiloxanes ( PS‐1 , PS‐2 , PS‐3 , PS‐4 , PS‐5 , PS‐6 ) bearing fluorinated units and sulfonic acid groups were synthesized with poly(methylhydrogeno)siloxane, cholest‐5‐en‐3‐ol(3β)‐4‐(2‐propenyloxy)benzoate, and 3‐trifluoromethyl‐phenyl 3‐sulfo‐4‐undec‐10‐ enoyloxy‐benzoate. The effects of fluorinated units and sulfonic acid groups on characteristic of liquid‐crystalline properties were studied. PS‐1 , PS‐2 , and PS‐3 exhibited both smectic and cholesteric mesophases, while PS‐4 , PS‐5 , and PS‐6 exhibited only cholesteric mesophase. As the polymers contained more fluorinated units and sulfonic acid groups, segregation of the fluorinated segment to the surface and aggregation of hydrogen bonding should occur. Therefore, the highly ordered lamellar mesogen–siloxane matrix systems should be disturbed severely, suggesting that PS‐4 , PS‐5 , and PS‐6 show no smectic phase. The maximum reflection bands become broad and shifted slightly to long wavelength from PS‐1 to PS‐6 . Copyright © 2008 John Wiley & Sons, Ltd.     

Covalently linked ethylmercaptophenyl sulfonic acid and ethylmercaptobenzyl sulfonic acid silica materials—Synthesis and catalytic activity

New covalently linked sulfonic acid modified silicas have been formed and characterised and their catalytic Brönsted activity evaluated. Thus phenylmercaptoethyltrimethoxysilane, (MeO)₃SiCH₂CH₂SC₆H₅ and benzylmercaptoethyltrimethoxysilane, (MeO)₃SiCH₂CH₂SCH₂C₆H₅, were used to prepare the corresponding T-functional silica derivatives silica  CH₂CH₂SC₆H₄-4-SO₃H and silica  CH₂CH₂SCH₂C₆H₄-4-SO₃H by grafting on commercial silica, followed by sulfonation of the aryl group. Solid-state NMR, DTA and surface area characteristics of the materials are reported. The mercaptophenylsulfonic acid materials are thermally robust highly efficient solid catalysts for a range of transformations including, esterification, etherification and carbonyl group protection. An apparent pore size effect on rate of conversion was observed. The mercaptobenzylsulfonic acid materials were comparatively unstable.     

Synthesis and properties of poly(arylene ether)s bearing sulfonic acid groups on pendant phenyl rings

Two kinds of new aromatic poly(arylene ether)s containing sulfonic acid groups were synthesized. Polymer 1 composed of tetraphenylphenylene ether and perfluorobiphenylene units was sulfonated with chlorosulfonic acid. Sulfonation took place only at the para position of the pendant phenyl rings. The average degree of sulfonation per repeating unit (m) was controlled from 1 to 4. Sulfonated polymer 2 with m = 3 was soluble in methanol and dimethyl sulfoxide and swelled in water. Incorporating bis(3,5‐dimethylphenyl)sulfone moieties into the sulfonated polymer imparts less methanol affinity. Polymers 4 with 30–65 mol % tetrakis(sulfophenyl)phenylene ether units has high decomposition temperatures above 300 °C, hydrophilicity, and good hydrolytic stability. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3211–3217, 2001     

Effects of adjacent groups of benzimidazole on antioxidation of polybenzimidazoles

The chemical oxidative stabilities of poly(2,2-(m-phenylene)-5,5-bibenzimidazole) (PBI-ph), poly(2,5-benzimidazole) (ABPBI), poly(2,2′-hexyl-5,5′-bibenzimidazole) (PBI-hex), and poly(2,2′-imidazole-5,5′-bibenzimidazole) (PBI-imi) are studied. By means of FTIR and ¹HNMR analysis, more information about the degradation process of PBI-ph is found as: CH₂ groups are left in the residual polymers; after the N-H bond and the trisubstituted benzene ring are oxidized by oxidative free radicals, the meta-phenylene is relatively stable. Through Fenton tests, the chemical oxidative stabilities of these PBIs are compared and results show that PBI-ph is the stablest material while PBI-imi is the unstablest one. Through FTIR analysis, the structure changes to those degraded PBIs are compared. The conjugated structure formed between meta-phenyl and benzimidazole can protect the main chain of PBI-ph from the attack of oxidative free radicals. Additionally, effects of acid on PBI-ph degradation rate are evaluated and the results show that phosphoric acid can slow down the chemical oxidative degradation.     

Distribution and catalytic activity of sulfonic acid groups in organic ion exchangers

The existence of inhomogeneities in the polymer structure of ion exchangers was demonstrated and their influence on catalytic properties was shown. The results are based on the differences in catalytic activity of two ion exchangers with low degrees of sulfonation differing in the distribution of active groups within the polymer particles.     

双活性磺酸基蔗渣木聚糖对羟基苯甲酸酯的合成及活性模拟

以蔗渣木聚糖(BX)为主要原料、氨基三磺酸钠为酯化剂,在一步酯化合成磺酸基蔗渣木聚糖酯的基础上,利用磺酸基蔗渣木聚糖酯和对羟基苯甲酸进行二步酯化反应,合成了磺酸基蔗渣木聚糖对羟基苯甲酸酯,并考察了反应条件对酯化反应的影响,通过单因素实验确定了第二步酯化反应较佳的合成工艺条件.蔗渣木聚糖酯化改性前后的样品分别用FT-IR,DG-DTG和XRD进行了表征,并对该双酯化衍生物的分子进行了优化与活性模拟.结果表明:FT-IR证明双酯化产物含有磺酸基团和对羟基苯甲酸酯基团,TG-DTG分析表明该双酯化衍生物的热稳定性提高,XRD说明发生双酯化改性后分子排列的规整性提高,结晶度增加;活性模拟实现了磺酸基蔗渣木聚糖对羟基苯甲酸酯与艾滋病毒的对接.     

聚苯乙烯磺酸掺杂聚苯胺的合成

以苯胺（An）为单体，过硫酸铵（APS）为氧化剂，在聚苯乙烯磺酸（PSSA）的水溶液中，合成了可完全溶于水的PSSA掺杂PAn。研究了An浓度，PSSA浓度，APS浓度，APS的滴加时间，反应时间及温度对An聚合反应及其产物的水溶性，导电性及特性粘度[η]的影响。结果表明：在比较宽的实验条件下，都可以合成出具有良好导电性的可溶于水的PSSA掺杂PAn；其中当An：PSSA:APS的摩尔比为1．7：2．5：1，APS溶液的滴加时间为3h，反应时间为1h，反应温度为14℃时，得到的掺杂PAn导电率最高达0．156S／cm。