Conjugated polymers containing electron‐transporting,hole‐transporting,and light‐emitting units in the polymer main chain

Conjugated polymers containing electron‐transporting, hole‐transporting, and blue light‐emitting units were synthesized by Suzuki polycondensation. These copolymers exhibited excellent thermal and optical stability. Optical investigation indicated that the incorporation of the spirobifluorene units in the polymer main chain could markedly increase the effective conjugation length of polymers. Electrochemical studies showed that the incorporation of spirobifluorene unit could raise the electrochemical stability and improve the electron‐ and hole‐injecting abilities. The electroluminescent results also showed that the introducing of spirobifluorene units could significantly improve the device performance. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1349–1356, 2008     

Synthesis and properties of conjugated polymers containing 3,9‐ and 2,9‐linked carbazole units in the main chain

Novel conjugated polymers containing 3,9‐ or 2,9‐linked carbazole units in the main chain were synthesized by the polycondensation of ethynyl‐ and iodo‐substituted 9‐arylenecarbazolylene monomers, and their optical and electrical properties were studied. Polymers with weight‐average molecular weights of 3400–12,000 were obtained in 76–99% yields by the Sonogashira coupling polycondensation in piperidine or tetrahydrofuran (THF)/piperidine at 30 °C for 48 h. All the 3,9‐linked polymers absorbed light around 300 nm. The para‐phenylene‐linked polymer also absorbed light around 350 nm, while meta‐phenylene‐linked one did not. The 3,9‐linked polymers absorbed light at a wavelength longer than the 2,9‐linked one. The polymers emitted blue fluorescence with high quantum yields (0.21–0.78) upon excitation at the absorption maxima. The polymers were oxidized around 0.6 V, and reduced around 0.5 V. Poly( 1 ) showed the dark conductivity of 3.7 × 10^?11 S/cm (10³ V/cm). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3506–3517, 2009     

Synthesis and electroluminescent studies of blue‐emitting copolymers containing phenylene vinylene and oxadiazole moieties in the main chain

Two statistical copolymers III and IV combining features of the two reference polymers I and II were synthesized by a Wittig reaction with the objective of raising the electron‐transport properties and fluorescence quantum yields relative to the alternating block copolymers I and II . The electroluminescent properties of single‐layer LEDs using these copolymers were studied. External quantum efficiencies of 0.035 and 0.11% were obtained from single‐layer devices on the basis of III and IV , respectively, which are higher than those of similar devices using I and II . Two single‐layer LEDs using a blend of I and II (4:1 and 1:1 wt/wt) corresponding to the compositions of copolymers III and IV , respectively, were also fabricated for comparison. Results indicated that the covalent incorporation of oxadiazole is effective in improving the efficiency of LEDs and that the molar content of oxadiazole plays an important role in the performance of the devices. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 235–241, 2002     

Synthesis and applications of polymers containing metallacyclopentadiene moieties in the main chain

Organometallic polymers containing metallacycles in the main chain were prepared by the reactions of diynes with low-valent organometallic complexes such as CpCo(PPh₃)₂, CP₂Ti(CH₂=CHC₂H₅), and (ⁱPrO)₂Ti(CH₂=CHCH₃). Their polymer reactions involving the conversion of the main chain structures gave rise to polymers containing functional groups in their main chain repeating units. Design and synthesis of organometallic polymers that potentially serve as novel functional materials are also described.     

Synthesis of conjugated polymers with azobenzene moieties in the main chain

Poly(phenylenevinylene)‐based conjugated polymers with azobenzene groups in the main chains were prepared by the Pd‐catalyzed coupling polymerization of divinylarenes with dihaloarenes. The Pd‐catalyzed coupling polymerization of 4,4′‐divinylazobenzene with dihaloarenes such as 1,3‐dibromobenzene, 1,4‐dibromo‐2,5‐dihexylbenzene, 4,4′‐dibromoazobenzene, and 4,4′‐diiodoazobenzene resulted in polymers with poor solubility. In contrast, soluble polymers containing azobenzene moieties in the main chains were attainable from divinylbenzenes with 4,4′‐dihaloazobenzenes if either or both of the monomers possessed hexyl groups on the aromatic rings. The number‐average molecular weight of the polymer exceeded 10,000 under optimized conditions, and the polymer showed a remarkably redshifted absorption in the visible region (456 nm). ¹H NMR and IR spectra supported that the polymers having only trans‐geometry for the double bonds. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1057–1063, 2000     

Phenylene vinylene‐based electroluminescent polymers with electron transport block in the main chain

We report a new route for the design of soluble phenylene vinylene (PV) based electroluminescent polymers bearing electron‐deficient oxadizole (OXD) and triazole (TZ) moieties in the main chains with the aryloxy linkage. Both series of the PV‐based polymers were prepared by Wittig reaction. By properly adjusting the OXD and/or TZ content through copolymerization, we can achieve an enhanced balance of hole‐ and electron injections, such that the device efficiency is significantly improved. Light‐emitting diodes fabricated from P1, P2, P3, P4, P5, P6, and P7 with the configuration of Indium–Tin Oxide (ITO)/Poly (styrene sulfonic acid) doped poly (ethylenedioxythiophene) (PEDOT)/polymer/Ca/Al, emit bright green light with the maximum peak around 500 nm. For the device using the optimal polymer (P4) as emitting layer, a maximum brightness of 1300 cd/m² at 20 V and a maximum luminance efficiency of 0.325 cd/A can be obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3469–3478, 2006     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

Synthesis and characterization of fluorene‐based copolymers containing siloxane or distilbene moieties on their main chain

Two novel types of polyfluorene copolymers containing siloxane linkages or distilbene moieties on their main‐chains were synthesized by Ni(0)‐mediated Yamamoto coupling polymerization. These polymers, designated P2Silo05, P2Silo15, PF‐P02, and PF‐P05 were prepared by copolymerization between 2,7‐dibromo‐9,9′‐dihexylfluorene and bis(bromobenzene)‐terminated disiloxane monomer (for P2Silo05 and P2Silo15) or dibromodistilbene monomer (for PF‐P02 and PF‐P05). All of the polymers were highly soluble in common organic solvents such as chloroform, toluene, and p‐xylene. The glass transition temperatures of the polymers were between 92 and 113 °C, and the decomposition temperatures for a 5% weight loss (T_d) were above 420 °C for all of the polymers, demonstrating high thermal stability. The molecular weight (M_w) of the polymers ranged from 4.2 × 10⁴ to 8.8 × 10⁴. The blue shift of the maximum in the UV‐visible absorption was greater in polymers with a higher molar percentage of siloxane linkages or distilbene moieties than in homo poly (dihexylfluorene) (PDHF). However, the photoluminescence spectra of the polymers were similar to those of PDHF in terms of the onsets and patterns. Single‐layer light‐emitting diodes were fabricated with a configuration of ITO/PEDOT:PSS/polymers/Ca/Al. The maximum electroluminescence emission wavelengths of the polymers were 425–450 nm, corresponding to pure blue light. The CIE co‐ordinates of the polyfluorenes containing siloxane linkages or distilbene moieties ranged from (0.21, 0.21) to (0.17, 0.10), indicating deeper blue light than that of PDHF {CIE co‐ordinates of (0.25, 0.29)}, with P2Silo15 giving the deepest blue‐light {CIE co‐ordinates of (0.17, 0.10)}. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1595–1608, 2009     

New polyphenylene‐ and polyphenylenevinylene‐based copolymers containing triarylpyrazoline units in the main chains

Two novel polyphenylene and polyphenylenevinylene copolymers containing triarylpyrazoline units in the main chains were synthesized and characterized. The resulting copolymers were amorphous and showed excellent solubility in common organic solvents, such as dichloromethane, chloroform, 1,2‐dichloroethane, chlorobenzene, toluene, and THF. The polymers possessed good thermal stability with glass transition temperatures of 82 and 96 °C and decomposition onset temperatures of 295 and 309 °C, respectively. They exhibited good photoluminescence properties with high photoluminescence efficiencies. Double‐layered light‐emitting‐diode devices with an indium tin oxide/Poly(3,4‐ethylenedioxythiophene)/polymer/Ba/Al configuration could emit strong green light with external quantum efficiencies of0.53 and 0.92%. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1632–1640, 2007     

Synthesis and characterization of soluble conjugated polymers having pyrene moiety in the main chain

Three new alternating conjugated polymers consisting of pyrene and 3‐dodecylthiophene ( PPyMT ), 4,4′‐didodecyl‐2,2′‐bithiophene ( PPyBT ), or 9,9‐didodecylfluorene ( PPyFlu ) moieties have been prepared using Suzuki coupling reaction or Sugimoto approaches. The polymers were readily soluble in common organic solvents and exhibited good thermal stability in nitrogen and air atmospheres. The structures and optical properties of the polymers were characterized by NMR, FTIR, XRD, UV–vis, and fluorescence spectroscopy. PPyMT and PPYBT showed blue‐light emission in solution, whereas PPyFlu performed blue‐light emitting in film state. The polymers exhibited an intermolecular aggregation and structural ordering due to pyrene–pyrene π–π stacking interaction. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of isoindigo‐based polymers using CH‐arylation polycondensation reactions for organic photovoltaics

A series of three new low bandgap donor–acceptor–donor–acceptor^/ (D–A–D–A^/) polymers have been successfully synthesized based on the combination of isoindigo as the electron‐deficient acceptor and 3,4‐ethylenedioxythiophene as the electron‐rich donor, followed by CH‐arylation with different acceptors (4,7‐dibromo[c][1,2,5]‐(oxa, thia, and/or selena)diazole ( 4a‐c )). These polymers were used as donor materials for photovoltaic applications. All of the polymers are highly stable and show good solubility in chlorinated solvents. The highest power conversion efficiency of 1.6% was achieved in the bulk heterojunction photovoltaic device that consisted of poly ((E)?6‐(7‐(benzo‐[c][1,2,5]‐thiadiazol‐4‐yl)?2,3‐dihydrothieno‐[3,4‐b][1,4]dioxin‐5‐yl)?6′‐(2,3‐dihydrothieno‐[3,4‐b][1,4]‐dioxin‐5‐yl)?1,1′‐bis‐(2‐octyldodecyl)‐[3,3′‐biindolinylidene]‐2,2′‐dione) as the donor and PC₆₁BM as the acceptor, with a short‐circuit current density (J_sc) of 8.10 mA/cm², an open circuit voltage (V_oc) of 0.56 V and a fill factor of 35%, which indicates that these polymers are promising donors for polymer solar cell applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2926–2933     

Triarylamine N‐functionalized 3,6‐linked carbazole main chain polymers and copolymers: Preparation and physical properties

The preparation of triarylamine N‐functionalized 3,6‐linked carbazole homopolymers as well as alternating copolymers with 2,5‐diphenyl‐[1,3,4]oxadiazole and benzo[1,2,5]thiadiazole was undertaken using Suzuki cross‐coupling polymerization procedures associating 3,6‐bis(4,4,5,5‐tetramethyl‐[1,3,2]dioxaborolan‐2‐yl)‐9‐(bis[4‐(2‐butyl‐octyloxy)‐phenyl]‐amino‐phen‐4‐yl)‐carbazole and, respectively, 3,6‐dibromo‐9‐(bis[4‐(2‐butyl‐octyloxy)‐phenyl]‐amino‐phen‐4‐yl)‐carbazole, 2,5‐bis(4‐bromo‐phenyl)‐[1, 3,4]oxadiazole, and 4,7‐dibromo‐benzo[1,2,5]thiadiazole. Both the carbazole homopolymer and alternating copolymer with 2,5‐diphenyl‐[1,3,4]oxadiazole were found as wideband gap materials emitting in the blue part of the electromagnetic spectrum while the carbazole alternating copolymer with 4,7‐benzo[1,2,5]thiadiazole had a narrower band gap and emitted in the orange part of the electromagnetic spectrum. The new polymers are thermally stable up to 300 °C. A discussion of the electrochemical and optical properties of the new polymers is presented. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5957–5967, 2007.     

Polysiloxane‐containing benzoxazine moieties in the main chain

Polysiloxanes containing thermally curable benzoxazine units in the main chain have been synthesized. For this purpose, first the diallyl functional benzoxazine monomer is synthesized through the Mannich and respective ring closing reactions of 4,4′‐isopropylidenediphenol (bisphenol A), formaldehyde, and allyamine. Subsequent hydrosilylation reaction of the resulting allylic monomer (B‐ala) with 1,1,3,3‐tetramethyldisiloxane (TMDS) in the presence of Pt catalyst yields the corresponding oligo(B‐ala‐tetramethyldisiloxane)s (OBTMDS). Using the anionic polymerization route, OBTMDS was then converted to poly(bisbenzoxazinedimethylsiloxane)s (PBDMSs) by reacting with readily available cyclic oligomer octamethylcyclotetrasiloxane (D4) or decamethylcyclopentasiloxane (D5) in the presence of tetrabutylammonium hydroxide as catalyst. The structures of the precursor diallyl monomer, the intermediate oligomer, and the resulting polymers are confirmed by Fourier transform infrared and ¹H NMR analysis. Curing behavior of the products at various stages has also been studied by differential scanning calorimetry. Flexible transparent films of the PBDMSs are obtained by solvent casting. Thermal properties of the cured polymers are also investigated by thermogravimetric analysis. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and properties of conjugated polymers containing 3,9‐carbazolylene and silylenevinylene moieties in the main chain

Novel conjugated polymers containing 3,9‐carbazolylene and silylenevinylene moieties were synthesized by the hydrosilylation polymerization of 1,4‐bis(3‐ethynyl‐9‐carbazolyl)benzene ( 1 ) with various bis(hydrosilane)s or dihydrosilanes using a rhodium catalyst. Polymers with weight‐average molecular weights ranging from 5400 to 20,000 were obtained in 55–97% yields by the polyaddition with a rhodium catalyst in toluene at 25 °C for 24 h. All the polymers were soluble in CHCl₃ and THF, and had predominantly trans‐structures. The polymers exhibited λ_max at a longer wavelength region than 1 , and emitted fluorescence in 14–50% quantumn yields. The polymers were oxidized and reduced in the region of 0.4–1.6 V, and thermally stable up to 200 °C under air. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1815–1821, 2010     

Space charge distribution in luminescent conjugated polymers

We have used for the first time the laser intensity modulation method (LIMM) to resolve the depth profile of space charges in films of poly[(2-(2-ethylhexyl)-5-methoxy-1,4-phenylene)vinylene] (MEH-PPV), poly(pyridine-2,5-diyl) (PPY) and poly(fluorene) (PFO). The results demonstrate that in conjugated polymers space charges can not only be created but also stored permanently.     

π‐Conjugated oligomers containing tropone in the main chain: Synthesis,characterization, and optical properties

The synthesis and characterization of tropone‐containing π‐conjugated oligomers were investigated. Two kinds of oligomers [1,4‐phenylene type ( 4a – 4e ) and 2,5‐thienylene type ( 5 )] were successfully obtained by the Wittig polycondensation technique, in which the tropone content could be controlled by the monomer feed ratio for the 1,4‐phenylene‐type oligomers. The absorption maximum blueshifted and the emission intensity decreased with an increase in the tropone content in the oligomers. The emissive color could be tuned by the selection of the aromatic ring; that is, 4a – 4e emitted orange‐yellow light and 5 emitted either orange‐yellow or red light according to the excitation wavelength. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3927–3937, 2002     

Fluoro‐protected carbazole main‐chain polymers as a new class of stable blue emitting polymers

The protection of the 3,6‐positions of 9‐alkyl‐9H‐carbazole repeat units with fluorine substituents in 2,7‐linked main‐chain polymers as well as in copolymers with triaryl amine repeat units affords blue emitting materials with enhanced electrolytic stability. The electronic conjugation of this new class of materials is more extended than that of the equivalent polymers where the 3,6‐positions are protected with methyl substitutions as a result of the smaller steric hindrance of their fluorine substituents. Attachment of fluorine‐protecting groups at the 3,6‐positions of carbazole repeat units in the homopolymers resulted in materials with relatively high ionization potentials (5.71 eV). However, introduction of triaryl amine comonomers as alternating repeat units provided carbazole/triaryl amine copolymers with a low ionization potential (5.25 eV), a very high quantum yield of fluorescence in solution (0.96), and narrow emission bands [full width at half maximum (FWHM) = 52 nm]. The preparation of this new class of materials together with a study of their electronic and photophysical properties is presented. Copyright © 2007 John Wiley & Sons, Ltd.     

Conjugated alternating copolymers containing both donor and acceptor moieties in the main chain

A straightforward synthesis toward two conjugated alternating copolymers consisting of 2,7-linked carbazole donor (2,7-Cz) and ladderized pentaphenylene with diketone bridge (LPPK) acceptor chromophores is reported: the copolymers differ by the repeat unit ratio between the 2,7-Cz and LPPK units within the backbone; energy and charge transfer properties and supramolecular organizations of donor-acceptor moieties in these copolymers have been studied via optical spectroscopy and two-dimensional wide-angle X-ray scattering (2D-WAXS); preliminary results such as the efficient energy and charge transfer and pi-stacking character in the solid state suggest that the copolymers are potentially useful for photovoltaic devices.     

Direct Heteroarylation versus Stille Polycondensation Reaction for the Synthesis of TQ1 Conjugated Polymer

We report a facile synthesis of the well‐known and highly promising conjugated polymer TQ1 using eco‐friendly direct heteroarylation reaction. Optimization of the reaction conditions yielded the target polymer with good optoelectronic and charge‐transport characteristics. The TQ1 polymer obtained in the direct heteroarylation reaction delivered power conversion efficiency of ～5% in organic bulk heterojunction solar cells, which matches well the characteristics of the reference devices assembled using TQ1 batch synthesized via conventional Stille polycondensation reaction. The obtained results highlight the potential of the direct heteroarylation reaction as an efficient and environment‐friendly alternative to Stille cross‐coupling in the design of high‐quality semiconductor materials for organic electronics. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 776–782