Kinetics and mechanism of the iodine oxidation of hydroxylamine

Studies of the stoichiometry and kinetics of the reaction between hydroxylamine and iodine, previously studied in media below pH 3, have been extended to pH 5.5. The stoichiometry over the pH range 3.4–5.5 is 2NH₂OH + 2I₂ = N₂O + 4I^? + H₂O + 4H⁺. Since the reaction is first-order in [I₂] + [I₃^?], the specific rate law, k₀, is k₀ = (k₁ + k₂/[H⁺]) {[NH₃OH⁺]₀/(1 + K_p[H⁺])} {1/(1 + K_I[I^?])}, where [NH₃OH⁺]₀ is total initial hydroxylamine concentration, and k₁, k₂, K_p, and K_I are (6.5 ± 0.6) × 10⁵ M^?1 s^?1, (5.0 ± 0.5) s^?1, 1 × 10⁶ M^?1, and 725 M^?1, respectively. A mechanism taking into account unprotonated hydroxylamine (NH₂OH) and molecular iodine (I₂) as reactive species, with intermediates NH₂OI₂^?, HNO, NH₂O, and I₂^?, is proposed.     

氢过碘酸）合银（III）配离子氧化L-脯氨酸的反应动力学及机理

L-脯氨酸独有的亚胺基使其在生物医药领域具有许多独特的功能,并广泛用作不对称有机化合物合成的有效催化剂。本文在碱性介质中研究了二（氢过碘酸）合银（III）配离子氧化 L-脯氨酸的反应。经质谱鉴定,脯氨酸氧化后的产物为脯氨酸脱羧生成的 γ-氨基丁酸盐;氧化反应对脯氨酸及Ag(III) 均为一级;二级速率常数 k′ 随 [IO₄^-] 浓度增加而减小,而与 [OHˉ] 的浓度几乎无关;推测反应机理应包括 [Ag(HIO₆)₂]^5-与 [Ag(HIO₆)(H₂O)(OH)]^2-之间的前期平衡,两种Ag（III）配离子均作为反应的活性组分,在速控步被完全去质子化的脯氨酸平行地还原,两速控步对应的活化参数为： k₁ (25 ^oC)＝1.87±0.04（mol·L^-1)^-1s^-1,∆ H₁^≠＝45±4 kJ · mol^-1, ∆ S₁^≠＝-90±13 J· K^-1·mol^-1 and k₂ (25 ^oC) ＝3.2±0.5（mol·L^-1)^-1s^-1, ∆ H₂^≠＝34±2 kJ · mol^-1, ∆ S₂^≠＝-122 ±10 J· K^-1·mol^-1。本文第一次发现 [Ag(HIO₆)₂]^5-配离子也具有氧化反应活性。     

Preparation and Diels-Alder Reactivity of 2,3,5,6,7,8-Hexamethylidenebicyclo [2.2.2]octane (‘[2.2.2]Hericene’). Force-field calculations of exocyclic dienes as a moiety of bicyclic skeletons

The [2.2.2]hericene ( 6 ), a bicyclo[2.2.2]octane bearing three exocyclic s-cis-butadiene units has been prepared in eight steps from coumalic acid and maleic anhydride. The hexaene 6 adds successively three mol-equiv. of strong dienophiles such as ethylenetetracarbonitrile (TCE) and dimethyl acetylenedicarboxylate (DMAD) giving the corresponding monoadducts 17 and 20 (k₁), bis-adducts 18 and 21 (k₂) and tris-adducts 19 and 22 (k₃), respectively. The rate constant ratio k₁/k₂ is small as in the case of the cycloadditions of 2,3,5,6-tetramethylidene-bicyclo [2.2.2]octane ( 3 ) giving the corresponding monoadducts 23 and 27 (k₁) and bis-adducts 25 and 29 (k₂) with TCE and DMAD, respectively. Constrastingly, the rate constant ratio k₂/k₃ is relatively large as the rate constant ratio k₁/k₂ of the Diels-Alder additions for 5,6,7,8-tetramethylidenebicyclo [2.2.2]oct-2-ene ( 4 ) giving the corresponding monoadducts 24 and 28 (k₁) and bis-adducts 26 and 30 (k₂). The following second-order rate constants (toluene, 25°) and activation parameters were obtained for the TCE additions: 3 +TCE→ 23 : k₁ = 0.591±0.012 mol^?1·l·s^?1, ΔH^≠=10.6±0.4 kcal/mol, and ΔS^≠ = ?24.0±1.4 cal/mol·K (e.u.); 23 +TCE→ 25 : k₂=0.034±0.0010 mol^?1·l·s^?1, ΔH^≠ = 10.6±0.6 kcal/mol, and ΔS^≠ = ?29.7±2.0 e.u.; 4 +TCE→ 26 : k₁ = 0.172±0.035 mol^?1·l·s^?1, ΔH^≠ 11.3±0.8 kcal/mol, and ΔS^≠ = ?24.0±2.8 e.u.; 24 +TCE→ 26 : k₂ = (6.1±0.2)·10^?4 mol^?1·l·s^?1, ΔH^≠ = 13.0±0.3 kcal/mol, and ΔS^≠ = ?29.5±0.8 e.u.; 6 +TCE→ 17 : k₁ = 0.136±0.002 mol^?1·l·s^?1, ΔH^≠ = 11.3±0.2 kcal/mol, and ΔS^≠ = ?24.5±0.8 e.u.; 17 +TCE→ 18 : k₂ = 0.0156±0.0003 mol^?1·l·s^?1, ΔH^≠ = 10.9±0.5 kcal/mol, and ΔS^≠ = ?30.1 ± 1.5 e.u.; 18 +TCE→ 19 : k₃=(5±0.2) · 10^?5 mol^?1 mol^?1 ·l·s^?1, ΔH^≠ = 15±3 kcal/mol, and ΔS^≠ = ?28 ± 8 e.u. The following rate constants were evaluated for the DMAD additions (CD₂Cl₂, 30°): 6 +DMAD→ 20 : k₁ = (10±1)·10^?4 mol^?1 · l·s^?1; 20 +DMAD→ 21 : k₂ = (6.5±0.1) · 10^?4 mol^?1 ·l·^?1; 21 +DMAD→ 22 : k₃ = (1.0±0.1) · 10^?4 mol^?1 ·l·s^?1. The reactions giving the barrelene derivatives 19, 22, 26 and 30 are slower than those leading to adducts that are not barrelenes. The former are estimated less exothermic than the latter. It is proposed that the Diels-Alder reactivity of exocyclic s-cis-butadienes grafted onto bicycle [2.2.1]heptanes and bicyclo [2.2.2]octanes that are modified by remote substitution of the bicyclic skeletons can be affected by changes inthe exothermicity of the cycloadditions, in agreement with the Dimroth and Bell-Evans-Polanyi principle. Force-field calculations (MMPI 1) of 3, 4, 6 and related exocyclic s-cis-butadienes as a moiety of bicyclo [2.2.2]octane suggested single minimum energy hypersurfaces for these systems (eclipsed conformations, planar dienes). Their flexibility decreases with the degree of unsaturation of the bicyclic skeleton. The effect of an endocyclic double bond is larger than that of an exocyclic diene moiety.     

Kinetics and mechanism of the reaction of OH with ClO

The kinetics and mechanism of the following reactions have been studied in the temperature range 230–360 K and at total pressure of 1 Torr of helium, using the discharge‐flow mass spectrometric method: 1a : (1a) 1b : (1b) The following Arrhenius expression for the total rate constant was obtained from the kinetics of OH consumption in excess of ClO radical, produced in the Cl + O₃ reaction either in excess of Cl atoms or ozone: k₁ = (6.7 ± 1.8) × 10^?12 exp {(360 ± 90)/T} cm³ molecule^?1 s^?1 (with k₁ = (2.2 ± 0.4) × 10^?11 cm³ molecule^?1 s^?1 at T = 298 K), where uncertainties represent 95% confidence limits and include estimated systematic errors. The value of k₁ is compared with those from previous studies and current recommendations. HCl was detected as a minor product of reaction (1) and the rate constant for the channel forming HCl (reaction (1b)) has been determined from the kinetics of HCl formation at T = 230–320 K: k_1b = (9.7 ± 4.1) × 10^?14 exp{(600 ± 120)/T} cm³ molecule^?1 s^?1 (with k_1b = (7.3 ± 2.2) × 10^?13 cm³ molecule^?1 s^?1 and k_1b/k₁ = 0.035 ± 0.010 at T = 298 K), where uncertainties represent 95% confidence limits. In addition, the measured kinetic data were used to derive the enthalpy of formation of HO₂ radicals: Δ H_f,298(HO₂) = 3.0 ± 0.4 kcal mol^?1. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 587–599, 2001     

Synthesis and Diels-Alder Reactivity of 2,3,5,6-Tetramethylidenenorbornane

Pd-catalyzed double carbomethoxylation of the Diels-Alder adduct of cyclo-pentadiene and maleic anhydride yielded the methyl norbornane-2,3-endo-5, 6-exo-tetracarboxylate ( 4 ) which was transformed in three steps into 2,3,5,6-tetramethyl-idenenorbornane ( 1 ). The cycloaddition of tetracyanoethylene (TCNE) to 1 giving the corresponding monoadduct 7 was 364 times faster (toluene, 25°) than the addition of TCNE to 7 yielding the bis-adduct 9 . Similar reactivity trends were observed for the additions of TCNE to the less reactive 2,3,5,6-tetramethylidene-7-oxanorbornane ( 2 ). The following second order rate constants (toluene, 25°) and activation parameters were obtained for: 1 + TCNE → 7 : k₁ = (255 + 5) 10^?4 mol^?1 · s^?1, ΔH≠ = (12.2 ± 0.5) kcal/mol, ΔS≠ = (?24.8 ± 1.6) eu.; 7 + TCNE → 9 , k₂ = (0.7 ± 0.02) 10^?4 mol^?1 · s^?1, ΔH≠ = (14.1 ± 1.0) kcal/mol, ΔS≠ = ( ?30 ± 3.5) eu.; 2 + TCNE → 8 : k₁ = (1.5 ± 0.03) 10^?4 mol^?1 · s^?1, ΔH≠ = (14.8 ± 0.7) kcal/mol, ΔS≠ = (?26.4 ± 2.3) eu.; 8 + TCNE → 10 ; k₂ = (0.004 ± 0.0002) 10^?4 mol^?1 · s^?1, ΔH≠ = (17 ± 1.5) kcal/mol, ΔS≠ = (?30 ± 4) eu. The possible origins of the relatively large rate ratios k₁/k₂ are discussed briefly.     

Kinetic study of the reaction of chlorine atoms with CF3I and the reactions of CF3 radicals with O2, Cl2 and NO at 296 K

The kinetics of the gas-phase reaction of Cl atoms with CF₃I have been studied relative to the reaction of Cl atoms with CH₄ over the temperature range 271–363 K. Using k(Cl + CH₄) = 9.6 × 10^?12 exp(?2680/RT) cm³ molecule^?1 s^?1, we derive k(Cl + CF₃I) = 6.25 × 10^?11 exp(?2970/RT) in which E_a has units of cal mol^?1. CF₃ radicals are produced from the reaction of Cl with CF₃I in a yield which was indistinguishable from 100%. Other relative rate constant ratios measured at 296 K during these experiments were k(Cl + C₂F₅I)/k(Cl + CF₃I) = 11.0 ± 0.6 and k(Cl + C₂F₅I)/k(Cl + C₂H₅Cl) = 0.49 ± 0.02. The reaction of CF₃ radicals with Cl₂ was studied relative to that with O₂ at pressures from 4 to 700 torr of N₂ diluent. By using the published absolute rate constants for k(CF₃ + O₂) at 1–10 torr to calibrate the pressure dependence of these relative rate constants, values of the low- and high-pressure limiting rate constants have been determined at 296 K using a Troe expression: k₀(CF₃ + O₂) = (4.8 ± 1.2) × 10^?29 cm⁶ molecule^?2 s^?1; k_∞(CF₃ + O₂) = (3.95 ± 0.25) × 10^?12 cm³ molecule^?1 s^?1; F_c = 0.46. The value of the rate constant k(CF₃ + Cl₂) was determined to be (3.5 ± 0.4) × 10^?14 cm³ molecule^?1 s^?1 at 296 K. The reaction of Cl atoms with CF₃I is a convenient way to prepare CF₃ radicals for laboratory study. © 1995 John Wiley & Sons, Inc.     

Base hydrolysis of (αβ S)-(o-methoxy benzoato) (tetraethylenepentamine) cobalt(III) ion: A comparative study of the role of ion pairs and micelles

The kinetics of base hydrolysis of (αβ S)-(o -methoxy benzoato) (tetraethylenepentamine)cobalt(III) obeyed the rate law: k_obs = k_OH[OH^?], in the range 0.05 ? [OH^?]_T, mol dm^?3 ? 1.0, I = 1.0 mol dm^?3, and 20.0–40.0°C. At 25°C, k_OH = 13.4 ± 0.4 dm³ mol^?1 s^?1, ΔH^≠ = 93 ± 2 kJ mol^?1 and ΔS^≠ = 90 ± 5 JK^?1 mol^?1. Several anions of varying charge and basicity, CH₃CO₂^?, SO₃^2?, SO₄^2?, CO₃^2?, C₂O₄^2?, CH₂(CO₂)₂^2?, PO₄^3?, and citrate^3? had no effect on the rate while phthalate^2?, NTA^3?, EDTA^4?, and DTPA^5? accelerated the process via formation of the reactive ion pairs. The anionic (SDS), cationic (CTAB), and neutral (Triton X-100) micelles, however, retarded the reaction, the effect being in the order SDS> CTAB > Triton X-100. The importance of electrostatic and hydrophobic effects of the micelles on the selective partitioning of the reactants between the micellar and bulk aqueous pseudo-phases which control the rate are discussed. © 1994 John Wiley & Sons, Inc.     

Kinetics and thermochemistry of the methyl radical: Study of the CH3 + HCl reaction

The kinetics of the reaction between CH₃ and HCl was studied in a tubular reactor coupled to a photoionization mass spectrometer. Rate constants were measured as a function of temperature (296–495 K) and were fitted to an Arrhenius expression: k₁ = 5.0(±0.7) × 10^?13 exp{?1.4(±0.3) kcal mol^?1/RT} cm³ molecule^?1 s^?1. This information was combined with known kinetic parameters of the reverse reaction to obtain Second Law determinations of the methyl radical heat of formation {34.7(±0.6) kcal mol^?1} and entropy {46(±2) cal mol^?1 K^?1} at 298 K. Using the known entropy of CH₃, a more accurate Third Law determination of the CH₃ heat of formation at this temperature was also obtained {34.8(±0.3) kcal mol^?1}. The values of k₁ obtained in this study are between those reported in prior investigations. The results were also used to test the accuracy of the thermochemical information which can be obtained from kinetic studies of R + HX (X = Cl, Br, I) reactions of the type described here.     

Kinetics of the Base-Catalysed Isomerization of trans-meso-CH3Co(H2O)L2+ (L = 5,7,7,12,14,14-Hexamethyl-1,4,8,11-tetraazacyclotetradeca-4,11-diene)

The isomerization of the complex trans-meso-CH₃Co(H₂O)L²⁺ (L = 5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraazacyclotetradeca-4,11-diene) to trans-primary, rac-CH₃Co(H₂O)L²⁺ has been investigated from pH range 7.11 to 8.09 in aqueous solution. The reaction rate law has been determined as: -d[meso-CH₃Co(H₂O)L²⁺]/dt = k_OH [OH^?][meso-CH₃Co(H₂O)L²⁺], where k_OH = 600 ± 10 M^?1s^?1 at 25 °C and μ = 0.5 M. The activation parameters of the reaction were also studied with ΔH^± = 19.1 ± 0.9 Kcal mol^?1 and ΔS^± = 18.0 ± 0.8 cal K^?1mol^?1. A mechanism that involves a secondary NH inversion is proposed.     

Kinetic Studies on the Reaction of Sodium Hexacyanoferrate（ll） Complex with Peroxydisulfate Anion

The oxidation of Na₄Fe(CN)₆ complex by S₂O anion was found to follow an outer‐sphere electron transfer mechanism. We firstly carried out the reaction at pH=1. The specific rate constants of the reaction, k_ox, are (8.1±0.07)×10^?2 and (4.3±0.1)×10^?2 mol^?1·L·s^?1 at μ=1.0 mol·L^?1 NaClO₄, T=298 K for pH=1 (0.1 mol·L^?1 HCl0₄) and 8, respectively. The activation parameters, obtained by measuring the rate constants of oxidation 283–303 K, were ΔH^≠=(69.0±5.6) kJ·mol^?1, ΔS^≠=(?0.34±0.041)×10² J·mol^?1·K^?1 at pH=l and ΔH^≠=(41.3±5.5) kJ·mol^?1, ΔS^≠=(?1.27±0.33)×10² J·mol^?1·K^?1 at pH=8, respectively. The cyclic voltammetry of Fe(CN) shows that the oxidation is a one‐electron reversible redox process with E_1/2 values of 0.55 and 0.46 V vs. normal hydrogen electrode at μ=1.0 mol·L^?1 LiClO₄, for pH=1 and pH=8 (Tris). respectively. The kinetic results were discussed on the basis of Marcus theory.     

Kinetic and Mechanisms of the Homogeneous,Unimolecular Elimination of Phenyl Chloroformate and p‐Tolyl Chloroformate in the Gas Phase

The gas‐phase elimination of phenyl chloroformate gives chlorobenzene, 2‐chlorophenol, CO₂, and CO, whereasp‐tolyl chloroformate produces p‐chlorotoluene and 2‐chloro‐4‐methylphenol CO₂ and CO. The kinetic determination of phenyl chloroformate (440–480^oC, 60–110 Torr) and p‐tolyl chloroformate (430–480°C, 60–137 Torr) carried out in a deactivated static vessel, with the free radical inhibitor toluene always present, is homogeneous, unimolecular and follows a first‐order rate law. The rate coefficient is expressed by the following Arrhenius equations: Phenyl chloroformate: Formation of chlorobenzene, log k_I = (14.85 ± 0.38) – (260.4 ± 5.4) kJ mol^?1 (2.303RT)^?1; r = 0.9993 Formation of 2‐chlorophenol, log k_II = (12.76 ± 0.40) – (237.4 ± 5.6) kJ mol^?1(2.303RT)^?1; r = 0.9993 p‐Tolyl chloroformate: Formation of p‐chlorotoluene: log k_I = (14.35 ± 0.28) – (252.0 ± 1.5) kJ mol^–1 (2.303RT)^?1; r = 0.9993 Formation of 2‐chloro‐4‐methylphenol, log k_II = (12.81 ± 0.16) – (222.2 ± 0.9) kJ mol^?1(2.303RT)^–1; r = 0.9995 The estimation of the k_I values, which is the decarboxylation process in both substrates, suggests a mechanism involving an intramolecular nucleophilic displacement of the chlorine atom through a semipolar, concerted four‐membered cyclic transition state structure; whereas the k_II values, the decarbonylation in both substrates, imply an unusual migration of the chlorine atom to the aromatic ring through a semipolar, concerted five‐membered cyclic transition state type of mechanism. The bond polarization of the C–Cl, in the sense C^{δ+ …} Cl^δ?, appears to be the rate‐determining step of these elimination reactions.     

Absolute rate constants for the reactions between amino and alkyl radicals at 298 K

The absolute rate constants for the reactions of NH₂ radicals with ethyl, isopropyl, and t-butyl radicals have been measured at 298 K, using a flash photolysis–laser resonance absorption method. Radicals were generated by flashing ammonia in the presence of an olefin. A new measurement of the NH₂ extinction coefficient and oscillator strength at 597.73 nm was performed. The decay curves were simulated by adjusting the rate constants of both the reaction of NH₂ with the alkyl radical and the mutual interactions of alkyl radicals. The results are k(NH₂ + alkyl) = 2.5 (±0.5), 2.0 (±0.4), and 2.5 (±0.5) × 10¹⁰ M^?1·s^?1 for ethyl, isopropyl, and t-butyl radicals, respectively. The best simulations were obtained when taking k(alkyl + alkyl) = 1.2, 0.6, and 0.65 × 10¹⁰M^?1·s^?1 for ethyl, isopropyl, and t-butyl radicals, respectively, in good agreement with literature values.     

Cuprous complexes and dioxygen,VII. Competition between one- and two-electron reduction of O2 in the autoxidation of Cu(1-methyl-2-hydroxymethyl-imidazole)2+

The complexation of 1-methyl-2-hydroxymethyl-imidazole (L) with Cu(I) and Cu(II) has been studied in aqueous acetonitrile (AN). Cu(I) forms three complexes, Cu(AN)L⁺, CuL₂⁺, and Cu(AN)H_?1L, with stability constants logK(Cu(AN)⁺ + L ? Cu(AN)L⁺) = 4.60 ± 0.02, logβ₂ = 11.31 ± 0.04, and logK(Cu(AN)H_?1L+H⁺ ? Cu(AN)L⁺) = 10.43 ± 0.08 in 0.15M AN. The main species for Cu(II) are CuL²⁺, CuH_?1L⁺, CuH_?1L₂⁺, and CuH_?2L₂. The autoxidation of CuL₂⁺ was followed with an oxygen sensor and spectrophotometrically. Competition between the formation of superoxide in a one-electron reduction of O₂ and a path leading to H₂O₂ via binuclear (CuL₂)₂O was inferred from the rate law with k_a = (2.31 ± 0.12) · 10⁴M ^?2S ^?1, k_b = (1.0 ± 0.2) · 10³M ^?1, k_c = (2.85 ± 0.07) · 10²M ^?2S ^?1, k_d = 3.89 ± 0.14M ^?1S ^?1, k_e = 0.112 ± 0.004, k_f = (2.06 ± 0.24) · 10^?10M S ^?1, k_g = (1.35 ± 0.07) · 10^?7 S ^?1, and k_h = (6.8 ± 1.4) · 10^?7M ^?1 S ^?1.     

High-Pressure Stopped-Flow Study of the Kinetics of Base Hydrolysis of the Dichromate Ion by Hydroxide Ion,Ammonia, Water,and 2,6-Lutidine in Aqueous Solution

Volumes of activation for the base hydrolysis of the dichromate anion have been measured at 298.2 K, using high-pressure stopped-flow spectrophotometry. The values of ΔV* (cm³ · mol^?1), ? 17.9 ± 0.6, ? 19.2 ± 0.9, ? 24.9 ± 0.9 and ? 26.0 ± 0.7 for OH^?, NH₃, H₂O and 2,6-lutidine, respectively, are consistent with an interchange mechanism with associative activation mode (I^a).     

Atmospheric chemistry of CH2FOCH2F: Reaction with Cl atoms and atmospheric fate of CH2FOCHFO· radicals

Smog chamber/FTIR techniques were used to study the Cl atom initiated oxidation of CH₂FOCH₂F in 700 Torr of N₂/O₂ at 296 K. Relative rate techniques were used to measure k(Cl + CH₂FOCH₂F) = (4.6 ± 0.7) × 10^?13 and k(Cl + CH₂FOC(O)F) = (2.9 ± 0.8) × 10^?15 (in units of cm³ molecule^?1 s^?1). Three competing fates for alkoxy radical CH₂FOCHFO· formed in the self‐reaction of the corresponding peroxy radicals were identified. In 1 atm of air at 296 K, 48 ± 3% of CH₂FOCHFO· radicals decompose via C? O bond scission, 21 ± 4% react with O₂, and 31 ± 4% undergo hydrogen atom elimination. Chemical activation effects were observed for CH₂FOCHFO· radicals formed in the CH₂FOCHFOO· + NO reaction. Infrared spectra of CH₂FOC(O)F and FC(O)OC(O)F, which are produced during the Cl atom initiated oxidation of CH₂FOCH₂F, are presented. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 139–147, 2002; DOI 10.1002/kin.10038     

The elimination kinetics and mechanisms of ethyl piperidine‐3‐carboxylate,ethyl 1‐methylpiperidine‐3‐carboxylate,and ethyl 3‐(piperidin‐1‐yl)propionate in the gas phase

The gas‐phase elimination kinetics of the above‐mentioned compounds were determined in a static reaction system over the temperature range of 369–450.3°C and pressure range of 29–103.5 Torr. The reactions are homogeneous, unimolecular, and obey a first‐order rate law. The rate coefficients are given by the following Arrhenius expressions: ethyl 3‐(piperidin‐1‐yl) propionate, log k₁(s^?1) = (12.79 ± 0.16) ? (199.7 ± 2.0) kJ mol^?1 (2.303 RT)^?1; ethyl 1‐methylpiperidine‐3‐carboxylate, log k₁(s^?1) = (13.07 ± 0.12)–(212.8 ± 1.6) kJ mol^?1 (2.303 RT)^?1; ethyl piperidine‐3‐carboxylate, log k₁(s^?1) = (13.12 ± 0.13) ? (210.4 ± 1.7) kJ mol^?1 (2.303 RT)^?1; and 3‐piperidine carboxylic acid, log k₁(s^?1) = (14.24 ± 0.17) ? (234.4 ± 2.2) kJ mol^?1 (2.303 RT)^?1. The first step of decomposition of these esters is the formation of the corresponding carboxylic acids and ethylene through a concerted six‐membered cyclic transition state type of mechanism. The intermediate β‐amino acids decarboxylate as the α‐amino acids but in terms of a semipolar six‐membered cyclic transition state mechanism. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 38: 106–114, 2006     

Kinetics and mechanism of the reaction of Cl atoms with HO2 radicals

The kinetic and mechanism of the reaction Cl + HO₂ → products (1) have been studied in the temperature range 230–360 K and at total pressure of 1 Torr of helium using the discharge‐flow mass spectrometric method. The following Arrhenius expression for the total rate constant was obtained either from the kinetics of HO₂ consumption in excess of Cl atoms or from the kinetics of Cl in excess of HO₂: k₁ = (3.8 ± 1.2) × 10^?11 exp[(40 ± 90)/T] cm³ molecule^?1 s^?1, where uncertainties are 95% confidence limits. The temperature‐independent value of k₁ = (4.4 ± 0.6) × 10^?11 cm³ molecule^?1 s^?1 at T = 230–360 K, which can be recommended from this study, agrees well with most recent studies and current recommendations. Both OH and ClO were detected as the products of reaction (1) and the rate constant for the channel forming these species, Cl + HO₂ → OH + ClO (1b), has been determined: k_1b = (8.6 ± 3.2) × 10^?11 exp[?(660 ± 100)/T] cm³ molecule^?1 s^?1 (with k_1b = (9.4 ± 1.9) × 10^?12 cm³ molecule^?1 s^?1 at T = 298 K), where uncertainties represent 95% confidence limits. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 317–327, 2001     

On the Gas‐Phase Reactivity of Complexed OH+ with Halogenated Alkanes

OH⁺ is an extraordinarily strong oxidant. Complexed forms (L? OH⁺), such as H₂OOH⁺, H₃NOH⁺, or iron–porphyrin‐OH⁺ are the anticipated oxidants in many chemical reactions. While these molecules are typically not stable in solution, their isolation can be achieved in the gas phase. We report a systematic survey of the influence on L on the reactivity of L? OH⁺ towards alkanes and halogenated alkanes, showing the tremendous influence of L on the reactivity of L? OH⁺. With the help of with quantum chemical calculations, detailed mechanistic insights on these very general reactions are gained. The gas‐phase pseudo‐first‐order reaction rates of H₂OOH⁺, H₃NOH⁺, and protonated 4‐picoline‐N‐oxide towards isobutane and different halogenated alkanes C_nH_2n+1Cl (n=1–4), HCF₃, CF₄, and CF₂Cl₂ have been determined by means of Fourier transform ion cyclotron resonance meaurements. Reaction rates for H₂OOH⁺ are generally fast (7.2×10^?10–3.0×10^?9 cm³ mol^?1 s^?1) and only in the cases HCF₃ and CF₄ no reactivity is observed. In contrast to this H₃NOH⁺ only reacts with tC₄H₉Cl (k_obs=9.2×10^?10), while 4‐CH₃‐C₅H₄N‐OH⁺ is completely unreactive. While H₂OOH⁺ oxidizes alkanes by an initial hydride abstraction upon formation of a carbocation, it reacts with halogenated alkanes at the chlorine atom. Two mechanistic scenarios, namely oxidation at the halogen atom or proton transfer are found. Accurate proton affinities for HOOH, NH₂OH, a series of alkanes C_nH_2n+2 (n=1–4), and halogenated alkanes C_nH_2n+1Cl (n=1–4), HCF₃, CF₄, and CF₂Cl₂, were calculated by using the G3 method and are in excellent agreement with experimental values, where available. The G3 enthalpies of reaction are also consistent with the observed products. The tendency for oxidation of alkanes by hydride abstraction is expressed in terms of G3 hydride affinities of the corresponding cationic products C_nH_2n+1⁺ (n=1–4) and C_nH_2nCl⁺ (n=1–4). The hypersurface for the reaction of H₂OOH⁺ with CH₃Cl and C₂H₅Cl was calculated at the B3 LYP, MP2, and G3_m* level, underlining the three mechanistic scenarios in which the reaction is either induced by oxidation at the hydrogen or the halogen atom, or by proton transfer.     

Substituent effects on the Bergman cyclization of (Z)‐1,5‐hexadiyne‐3‐enes: a systematic computational study

The effects of several substituents (? BH₂, ? BF₂, ? AlH₂, ? CH₃, ? C₆H₅, ? CN, ? COCH₃, ? CF₃, ? SiH₃, ? NH₂, ? NH₃⁺, ? NO₂, ? PH₂, ? OH, ? OH₂⁺, ? SH, ? F, ? Cl, ? Br) on the Bergman cyclization of (Z)‐1,5‐hexadiyne‐3‐ene (enediyne, 3 ) were investigated at the Becke–Lee–Yang–Parr (BLYP) density functional (DFT) level employing a 6‐31G* basis set. Some of the substituents (? NH₃⁺, ? NO₂, ? OH, ? OH₂⁺, ? F, ? Cl, ? Br) are able to lower the barrier (up to a minimum of 16.9 kcal mol^?1 for difluoro‐enediyne 7rr ) and the reaction enthalpy (the cyclization is predicted to be exergonic for ? OH₂⁺ and ? F) compared to the parent system giving rise to substituted 1,4‐dehydrobenzenes at physiological temperatures. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1605–1614, 2001     

The gas‐phase elimination kinetics of ethyl 2‐furoate and ethyl 2‐thiophenecarboxylate

The gas‐phase elimination kinetics of ethyl 2‐furoate and 2‐ethyl 2‐thiophenecarboxylate was carried out in a static reaction system over the temperature range of 623.15–683.15 K (350–410°C) and pressure range of 30–113 Torr. The reactions proved to be homogeneous, unimolecular, and obey a first‐order rate law. The rate coefficients are expressed by the following Arrhenius equations: ethyl 2‐furoate, log k₁ (s^?1) = (11.51 ± 0.17)–(185.6 ± 2.2) kJ mol^?1 (2.303 RT)^?1; ethyl 2‐thiophenecarboxylate, log k₁ (s^?1) = (11.59 ± 0.19)–(183.8 ± 2.4) kJ mol^?1 (2.303 RT)^?1. The elimination products are ethylene and the corresponding heteroaromatic 2‐carboxylic acid. However, as the reaction temperature increases, the intermediate heteroaromatic carboxylic acid products slowly decarboxylate to give the corresponding heteroaromatic furan and thiophene, respectively. The mechanisms of these reactions are suggested and described. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 145–152, 2009