聚γ-(β-氰乙基)胺丙基硅氧烷铂配合物的合成与催化性能

γ-氨丙基三乙氧基硅烷与丙烯腈反应，得到γ-(β-氰乙基)胺丙基三乙氧基硅烷。后者用气相法二氧化硅固载，再与氯亚铂酸钾反应，合成了聚γ-(β-氰乙基)胺丙基硅氧烷铂配合物。研究了它对不饱和烃与三乙氧基硅烷的硅氢加成反应的催化特性。     

硅烷化凹凸棒石负载H5PMo10V2O40催化合成苯甲醛乙二醇缩醛

以酸活化的凹凸棒石（Pa）为原料,用3-氨丙基三乙氧基硅烷（APTES）嫁接法制备了以3-氨丙基三乙氧基硅烷（3-aminopropyl—triethoxysilane,APTES）硅烷化凹凸棒石（PaAms）为载体负载Keggin型H5PMo10V2O40杂多酸催化剂（PMoV／PaAPTES）,并用红外光谱分析、X...     

γ-脲丙基三乙氧基硅烷的制备及表征

采用γ-氨丙基三乙氧基硅烷与尿素进行亲核取代反应,合成了γ-脲基丙基三乙氧基硅烷;通过对工艺条件的优化制备得到了纯度高达99%以上的产品并采用红外光谱及核磁进行了表征。     

氨丙基官能化HMS介孔分子筛的合成及表征

沿S0I0路径,以十六胺为模板剂,以3-氨丙基三乙氧基硅烷为有机硅源,通过与TEOS共水解沉淀合成了氨丙基官能化HMS介孔分子筛.采用粉末X-射线衍射分析、N2吸/脱附、扫描电镜分析、高分辨透射电镜分析、傅立叶变换红外分析以及元素分析等表征手段,对所合成的材料进行表征.氨丙基官能化HMS介孔分子筛具有worm-like孔道结构,且较为均一的孔径分布.研究了前体硅源中3-氨丙基三乙氧基硅烷含量的变化对氨丙基官能化HMS介孔分子筛的相结构及织构性能的影响.傅立叶变换红外分析表明,NH2-CH2-CH2-CH2有机基团分布在杂化HMS介孔孔道中.     

聚γ—（β—氰乙基）胺丙基硅氧烷铑配合物的合成与催化性能

γ－氨丙基三乙氧基硅烷与丙烯腈加成，得到γ－（β－氰乙基）胺丙基三乙氧基硅烷。后者依次与气相法二氧化硅、三氯化铑作用，合成了聚γ－（β－氰乙基）胺丙基硅氧烷铑配合物。它对烯烃与三乙氧基硅烷的硅氢加成反应具有良好的催化活性。     

四氨基酞菁锌负载二氧化硅纳米粒子的合成及其对细胞毒性的研究

通过在无极核微乳液中水解乙烯基三乙氧基硅烷(TEVS)和3-氨丙基三乙氧基硅烷(APTES),制备了疏水性光敏剂-2,9,16,23-四氨基酞菁锌负载的表面带有正电荷的二氧化硅纳米粒子(SiO2@ ZnPc( NH2)4).通过透射电镜(TEM)、Zetasizer Nano-ZS粒度仪(DLS)、紫外-可见分光光度计...     

直接法制备三乙氧基硅烷催化剂的研究进展

综述了直接法合成三乙氧基硅烷的研究进展,着重对直接法的反应机理和催化剂组分的筛选进行了分析讨论.同时介绍了以三乙氧基硅烷为原料,合成烯丙基三乙氧基硅烷、γ-(2,3-环氧丙氧)丙基三乙氧基硅烷、苯乙基三乙氧基硅烷、五乙氧基二硅烷等衍生物的工艺,提出了催化剂制备过程中存在的问题及研究方向.     

硼酸亲和杂化毛细管整体柱选择性富集蒲公英中的活性物质

以四乙氧基硅烷,N-氨乙基-3-氨丙基三乙氧基硅烷,3-甲基丙烯酰氧丙基三甲氧基硅烷作为前驱,4-乙烯基苯硼酸为单体,在毛细管中原位制备硼酸亲和杂化整体柱,该柱可在中性条件下选择性的富集顺式二羟基生物分子,实现了对蒲公英中活性成分咖啡酸及绿原酸的选择性富集。     

多孔硅球的活化和硅烷化

经甲烷磺酸水溶液活化处理的多孔硅球与γ－氨丙基三乙氧基硅烷的反应能力较浓盐酶活化方法有显著提高；多孔硅球与γ－氨丙基三乙氧基硅烷的反应由两个步骤组成，即先室温反应然后再回流；用改进方法制备的氨丙基硅烷化多孔硅球固定化胰凝乳蛋白酶时，其酶活力满足选择催化ＤＬ－苯丙氨酸甲酯水解的需要，相同反应条件下，多孔硅球比表面积越大，氨丙基硅烷化产物氨基含量越高。     

聚γ-(β-氰乙硫基)两基硅氧烷铑配合物的合成与催化硅氢化性能

γ-巯丙基三乙氧基硅烷与丙烯腈加成，得到γ－（β-氰乙硫基）丙基三乙氧基硅烷，后者依次与气相法二氧化硅、三氯化铑作用，合成了聚γ-（β-氰乙硫基）丙基硅氧烷铑配合物，研究了其催化烯烃与三乙氧基硅烷硅氢加成反应的特性。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.