Photo-induced intermolecular electron transfer from electron donating solvents to Coumarin dyes in bile salt aggregates: role of diffusion in electron transfer reaction

The photo-induced electron transfer between Coumarin dyes and aromatic amines has been investigated using steady state and time-resolved fluorescence quenching studies. We have observed a Marcus type inversion in the electron transfer rate in correlation of quenching constant to the free energy change occurred during reaction. To justify the "inverted region" obtained in the correlation of quenching constant versus free energy curve, we have performed anisotropy measurement and estimated the several diffusional parameters. The translational diffusion coefficients exhibit a similar picture like electron transfer rate constant when it is plotted against free energy. Thus we argued that the diffusion has played an important role in the electron transfer kinetics.     

Screening of exciplex formation by distant electron transfer

The excitation quenching by reversible exciplex formation, combined with irreversible but distant electron transfer, is considered by means of the integral encounter theory (IET). Assuming that the quenchers are in great excess, the set of IET equations for the excitations, free ions, and exciplexes is derived. Solving these equations gives the Laplace images of all these populations, and these are used to specify the quantum yields of the corresponding reaction products. It appears that diffusion facilitates the exciplex production and the electron transfer. On the other hand the stronger the electron transfer is, the weaker is the exciplex production. At slow diffusion the distant quenching of excitations by ionization prevents their reaching the contact where they can turn into exciplexes. This is a screening effect that is most pronounced when the ionization rate is large.     

A New Redox Reaction of Ascorbic Acid at Platinum Electrodes

A pair of new redox peaks of ascorbic acid at a platinum electrode was found and studied in detailed by spectroelectrochemistry and electrochemistry technologies. This is a quasi‐reversible redox reaction with a one‐electron transfer process. The intermediate of tertiary carbon free radical exists in this process. The appearance reaction rate constant and the diffusion coefficient were investigated. A possible reaction mechanism has been proposed.     

The dynamics of electron self-exchange between nanoparticles.

The rate of electron self-exchange reactions between discretely charged metal-like cores of nanoparticles has been measured in multilayer films of nanoparticles by an electrochemical method. The nanoparticles are Au monolayer-protected clusters with mixed monolayers of hexanethiolate and mercaptoundecanoic acid ligands, linked to each other and to the Au electrode surface with carboxylate-metal ion-carboxylate bridges. Cyclic voltammetry of the nanoparticle films exhibits a series of well-defined peaks for the sequential, single-electron, double-layer charging of the 1.6-nm-diameter Au cores. The electron self-exchange is measured as a diffusion-like electron-hopping process, much as in previous studies of redox polymer films on electrodes. The average electron diffusion coefficient is DE = 10(+/-5) x 10(-8) cm2/s, with no discernible dependence on the state of charge of the nanoparticles or on whether the reaction increases or decreases the core charge. This diffusion constant corresponds to an average first-order rate constant kHOP of 2(+/-1) x 10(6) s(-1) and an average self-exchange rate constant, kEX, of 2(+/-1) x 10(8) M(-1) x s(-1), using a cubic lattice hopping model. This is a very large rate constant, considering the nominally lengthy linking bridge between the Au cores.     

Mechanism and kinetics of hydrated electron diffusion

Molecular dynamics simulations are used to study the mechanism and kinetics of hydrated electron diffusion. The electron center of mass is found to exhibit Brownian-type behavior with a diffusion coefficient considerably greater than that of the solvent. As previously postulated by both experimental and theoretical works, the instantaneous response of the electron to the librational motions of surrounding water molecules constitutes the principal mode of motion. The diffusive mechanism can be understood within the traditional framework of transfer diffusion processes, where the diffusive step is akin to the exchange of an extramolecular electron between neighboring water molecules. This is a second-order process with a computed rate constant of 5.0 ps(-1) at 298 K. In agreement with experiment the electron diffusion exhibits Arrhenius behavior over the temperature range of 298-400 K. We compute an activation energy of 8.9 kJ mol(-1). Through analysis of Arrhenius plots and the application of a simple random walk model it is demonstrated that the computed rate constant for exchange of an excess electron is indeed the phenomenological rate constant associated with the diffusive process.     

Hydrated electron production by reaction of hydrogen atoms with hydroxide ions: a first-principles molecular dynamics study

The solvated electron production by reaction between the H atom and the hydroxide anion was studied using Density Functional Theory based first-principles molecular dynamics. The simulation reveals a complex mechanism, controlled by proton transfers in the coordination sphere of the hydroxide and by the diffusion of the H atom in its solvent cavity. We formulate the hypothesis, based on a coupling between classical and first-principles molecular dynamics, that these two processes give rise to a lag time for the reaction that would explain the H atom extremely small reactivity compared to other radical species. Furthermore, the reaction observed gives an original insight in excess electron solvation.     

Chlorine dioxide oxidation of dihydronicotinamide adenine dinucleotide (NADH)

The oxidation of dihydronicotinamide adenine dinucleotide (NADH) by chlorine dioxide in phosphate buffered solutions (pH 6-8) is very rapid with a second-order rate constant of 3.9 x 10(6) M(-1) s(-1) at 24.6 degrees C. The overall reaction stoichiometry is 2ClO2(*) per NADH. In contrast to many oxidants where NADH reacts by hydride transfer, the proposed mechanism is a rate-limiting transfer of an electron from NADH to ClO2(*). Subsequent sequential fast reactions with H(+) transfer to H2O and transfer of an electron to a second ClO2(*) give 2ClO2(-), H3O(+), and NAD(+) as products. The electrode potential of 0.936 V for the ClO2(*)/ClO2(-) couple is so large that even 0.1 M of added ClO2(-) (a 10(3) excess over the initial ClO2(*) concentration) fails to suppress the reaction rate.     

Tracing the reactive melting of glass-forming silicate batches by in situ 23Na NMR

The kinetics of the reaction of batches of powdered quartz and sodium carbonate was studied by in situ (23)Na nuclear magnetic resonance (NMR) spectroscopy using a laser-heated probe. We show for the first time that the technique allows one to study solid-state reactions at high temperatures with good time resolution and without the risk of quenching artifacts. The reaction is controlled by solid-state Na(+) diffusion across the grain interface. Independent of the batch composition, the first reaction product is crystalline sodium metasilicate, Na(2)SiO(3), even if the temperature is high enough for much of the composition space between silica and metasilicate to be above the equilibrium liquidus. Fast Na(+) diffusion allows the reaction front to cross the grain interface and form the solid product before liquid intermediate equilibrium products can be formed. This purely solid-state reaction slows down as the thickness of the interface increases; the reaction is more deceleratory than published models suggest. If excess quartz is present, it reacts in a second step involving a liquid film wetting the excess grains. Once this reaction has started, it pulls the reaction into the thermodynamic regime, which leads to an increase even in the rate of the first step leading to intermediate solid metasilicate.     

Effect of diffusion in solid acid catalyzed inulin hydrolysis

Hydrolysis of inulin was investigated employing various solid acids as hydrolytic catalysts. The catalytic performances of several ion exchange resins were compared. The effects of the particle size and porosity on the hydrolysis reaction were found to be significant, indicating that the intraparticle diffusion of reactants controls the reaction rate. Theoretical models were developed, therefore, to analyze the effects of intraparticle diffusion occurring in a sequential reaction. The results were found to be consistent with experimental observations regarding the adverse effects of pore diffusion and the reaction pattern.     

Solvent reorganization of electron transitions in viscous solvents

We develop a model of electron transfer reactions at conditions of nonergodicity when the time of solvent relaxation crosses the observation time window set up by the reaction rate. Solvent reorganization energy of intramolecular electron transfer in a charge-transfer molecule dissolved in water and acetonitrile is studied by molecular dynamics simulations at varying temperatures. We observe a sharp decrease of the reorganization energy at a temperature identified as the temperature of structural arrest due to cage effect, as discussed by the mode-coupling theory. This temperature also marks the onset of the enhancement of translational diffusion relative to rotational relaxation signaling the breakdown of the Stokes-Einstein relation. The change in the reorganization energy at the transition temperature reflects the dynamical arrest of the slow, collective relaxation of the solvent related to the relaxation of the solvent dipolar polarization. An analytical theory proposed to describe this effect agrees well with both the simulations and experimental Stokes shift data. The theory is applied to the analysis of charge-transfer kinetics in a low-temperature glass former. We show that the reorganization energy is substantially lower than its equilibrium value for the low-temperature portion of the data. The theory predicts the possibility of discontinuous changes in the dependence of the electron transfer rate on the free energy gap when the reaction switches between ergodic and nonergodic regimes.     

Transient absorption studies and numerical modeling of iodine photoreduction by nanocrystalline TiO2 films

We have used transient absorption spectroscopy to study the reaction between photogenerated electrons in a dye-free nanocrystalline titanium dioxide film and an iodine/iodide redox couple. Recombination kinetics was measured by recording the transient optical signal following band gap excitation by a UV laser pulse. In the presence of a methanol hole scavenger in the electrolyte, a long-lived (0.1-1 s) red/infrared absorbance is observed and assigned to photogenerated electrons forming Ti(3+) species. In the presence of iodine and excess iodide in the electrolyte, the signal decays on a millisecond-microsecond time scale, assigned to reduction of the redox couple by photogenerated electrons in the TiO(2). The electron lifetime decreases inversely with increasing iodine concentration, indicating that the back reaction is first order in [I(2)]. No evidence for I(2)(-) is observed, indicating that the reaction mechanism does not involve the formation of I(2)(-) as an intermediate. The shape of the kinetics evolves from monoexponential at low [I(2)] to stretched-exponential as [I(2)] increases. A Monte Carlo continuous-time random walk model is implemented to simulate the kinetics and its [I(2)] dependence and used to address the order of the recombination reaction with respect to electron density, n. The model incorporates the diffusion of oxidized species from the electrolyte toward the TiO(2) surface as well as electron trapping and transport in the TiO(2). In the limit of low [I(2)], the monoexponential kinetics is explained by the recombination reaction being rate limited by the diffusion of the oxidized species in the electrolyte. The stretched-exponential behavior at high [I(2)] can be explained by the reaction being rate limited by the transport of electrons through a distribution of trap states toward reactive sites at the TiO(2)-electrolyte interface, similar to the mechanism proposed previously for the kinetics of electron-dye cation recombination. Such trap-limited recombination can also explain the superlinear dependence of electron recombination rate on electron density, which has been reported elsewhere, without the need for a reaction mechanism that is second order in n. In contrast, a second-order reaction mechanism in a trap-free medium cannot explain the observed kinetics, although a second-order mechanism incorporating electron trapping cannot be conclusively ruled out by the data. We propose that the most likely reaction scheme, that is first order in both [I(2)] and n, is the dissociative reduction of I(2) onto the metal oxide surface, followed by a second electron reduction of the resulting adsorbed iodine radical, and that empirical second-order behavior of the electron lifetime is most likely explained by electron trapping rather than by a second-order recombination mechanism.     

Reduction of an Ensemble of Platinum(II) Aquachloride Complexes: Dynamic Effect of the Solvent

Dynamic effect of the solvent is studied for the first time ever for the process that occurs in the vicinity of the activationless region, namely, the reaction of electroreduction of an ensemble of platinum(II) aquachloride complexes on a negatively charged mercury electrode. A sequential analysis of the sucrose influence on the interface structure and the equilibrium solvation energy is performed. Estimates of the above effects are given. These are necessary for subtracting the dependence of the electron transfer rate on the solvent relaxation time from the observed overall dependence on the concentration of the viscosity-forming additive. A procedure for estimating the sucrose concentration in the reaction layer is suggested and on this basis the increase in the local viscosity near the interface, which is caused by the presence of a surface excess of sucrose, is approximately taken into account. The potential interval where the reaction under study occurs in an almost adiabatic mode is determined.     

Homogeneous N doping of thick polyacetylene films by chemical way

The kinetics of reduction (n doping) of fibrillar films of polyacetylene (PA) by a large excess of organoalkaline electron donors in solution was studied. The doping rate is proportional to dopant concentration and inversely proportional to the square of film thickness (in a range 100–1000 microns). This means that the kinetics of reduction is entirely controlled, in these experiments, by the interfibrillar diffusion of dopants, leading to macroscopic doping inhomogeneity if the reaction is stopped before completion. The maximum doping level achieved at the end of the reaction is mainly controlled by the redox potential of the dopant. Homogeneously doped thick films, at various doping levels, were prepared using a suitable set of dopants in various solvents.     

Diffusion-controlled vinyl polymerization. I. The gel effect

It is well known that the reaction rate and molecular weight of vinyl polymers can change markedly during the course of polymerization and that these changes are due to the influence of diffusion on the termination reaction. The chain length dependence of the termination rate constant has been considered in this work and has resulted in a general method of treating the polymerization kinetics and molecular weight distribution. This method is independent of the form of the chain length dependency and is capable of dealing with both disproportionation and recombination modes of termination. A specific model for the termination rate constant with chain length dependence is proposed and is based on free volume theory and entanglement coupling. Master curves for the characteristics of the reaction rate and molecular weight distribution are presented with the application of this model.     

停止-流动分光光度法研究铕(II)与二甲酚橙快速电子转移反应动力学

用停止-流动分光光度法研究了Eu~(2+)与二甲酚橙(XO)间快速电子转移反应的动力学规律。求得了速控步骤的动力学参数。如反应级数(n=2)、几个不同温度下的速率常数(k_(278 K)=5.7×10~8 L·mol~-·s~(-1), k_(s38 K)=1.01×10~9 L·mol~(-1)·s~(-1))、活化能(E=7.6×10~3 J·mol~(-1)), 以及指前因子(A=1.5×10~(10) L·mol~(-1)·s~(-1)), 并判断出其为溶液中扩散控制型反应。根据实验现象与测试结果, 提出了Eu~(2+)与XO的反应分别在Eu~(2+)相对过量和在XO过量时的反应机理, 并判断了各反应步骤速率常数之间的相对关系。     

Photoinduced bimolecular electron transfer investigated by femtosecond time-resolved infrared spectroscopy

Ultrafast infrared transient absorption spectroscopy is used to study the photoinduced bimolecular electron transfer reaction between perylene in the first singlet excited state and 1,4-dicyanobenzene in acetonitrile and dichloromethane. Following vibrational marker modes on both donor and acceptor sides in real time provides direct insight into the structural dynamics during the reaction. A band narrowing on a time scale of a few tens of picoseconds observed on the antisymmetric CN stretching vibration of the dicyanobenzene radical anion indicates that a substantial part of the excess energy is channeled into vibrational modes of the product, despite the fact that the reaction is weakly exergonic. An additional narrowing of the same band on a time scale of several hundreds of picoseconds observed in acetonitrile only is interpreted as a signature of the dissociation of the geminate ion pairs into free ions.     

Dynamics of surface catalyzed reactions; the roles of surface defects, surface diffusion, and hot electrons

The mechanism that controls bond breaking at transition metal surfaces has been studied with sum frequency generation (SFG), scanning tunneling microscopy (STM), and catalytic nanodiodes operating under the high-pressure conditions. The combination of these techniques permits us to understand the role of surface defects, surface diffusion, and hot electrons in dynamics of surface catalyzed reactions. Sum frequency generation vibrational spectroscopy and kinetic measurements were performed under 1.5 Torr of cyclohexene hydrogenation/dehydrogenation in the presence and absence of H(2) and over the temperature range 300-500 K on the Pt(100) and Pt(111) surfaces. The structure specificity of the Pt(100) and Pt(111) surfaces is exhibited by the surface species present during reaction. On Pt(100), pi-allyl c-C6H9, cyclohexyl (C6H11), and 1,4-cyclohexadiene are identified adsorbates, while on the Pt(111) surface, pi-allyl c-C6H9, 1,4-cyclohexadiene, and 1,3-cyclohexadiene are present. A scanning tunneling microscope that can be operated at high pressures and temperatures was used to study the Pt(111) surface during the catalytic hydrogenation/dehydrogenation of cyclohexene and its poisoning with CO. It was found that catalytically active surfaces were always disordered, while ordered surface were always catalytically deactivated. Only in the case of the CO poisoning at 350 K was a surface with a mobile adsorbed monolayer not catalytically active. From these results, a CO-dominated mobile overlayer that prevents reactant adsorption was proposed. By using the catalytic nanodiode, we detected the continuous flow of hot electron currents that is induced by the exothermic catalytic reaction. During the platinum-catalyzed oxidation of carbon monoxide, we monitored the flow of hot electrons over several hours using a metal-semiconductor Schottky diode composed of Pt and TiO2. The thickness of the Pt film used as the catalyst was 5 nm, less than the electron mean free path, resulting in the ballistic transport of hot electrons through the metal. The electron flow was detected as a chemicurrent if the excess electron kinetic energy generated by the exothermic reaction was larger than the effective Schottky barrier formed at the metal-semiconductor interface. The measurement of continuous chemicurrent indicated that chemical energy of exothermic catalytic reaction was directly converted into hot electron flux in the catalytic nanodiode. We found the chemicurrent was well-correlated with the turnover rate of CO oxidation separately measured by gas chromatography.     

Reversibility and diffusion in mandelythiamin decarboxylation. Searching dynamical effects in decarboxylation reactions

Decarboxylation of mandelylthiamin in aqueous solution is analyzed by means of quantum mechanics/molecular mechanics simulations including solvent effects. The free energy profile for the decarboxylation reaction was traced, assuming equilibrium solvation, while reaction trajectories allowed us to incorporate nonequilibrium effects due to the solvent degrees of freedom as well as to evaluate the rate of the diffusion process in competition with the backward reaction. Our calculations that reproduce the experimental rate constant show that decarboxylation takes place with a non-negligible free energy barrier for the backward reaction and that diffusion of carbon dioxide is very fast compared to the chemical step. According to these findings catalysts would not act by preventing the backward reaction.     

Distribution of melamine in polyester–melamine surface coatings cured under nonisothermal conditions

The influence of experimental cure parameters on the diffusion of reactive species in polyester–melamine thermoset coatings during curing has been investigated with X‐ray photoelectron spectroscopy and attenuated total reflectance Fourier transform infrared. The diffusion of melamine plays a vital role in the curing process and, therefore, in the ultimate properties of coatings. At a low (<20%) hexamethoxymethylmelamine (HMMM) crosslinker concentration, the matrix composition is uniform, but at high HMMM concentrations, excess HMMM rapidly segregates to the air–coating interface. The rate of migration is governed by the difference in the surface free energies of polyester and HMMM and the concentration gradient of HMMM between the bulk and the surface. An increased rate of energy absorption also increases the rate of migration of HMMM to the surface. A physical model has been proposed to explain this surface segregation phenomenon in terms of cocondensation and self‐condensation reactions. It suggests that an appropriate amount of melamine can be segregated on the surface and allowed to self‐condense to form a desired thickness of a melamine topcoat through the control of the binder composition and cure conditions. This technique can be implemented to apply a melamine topcoat during cure. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 83–91, 2004