Ce添加对Cu-Fe/SiO2催化合成气制低碳醇性能的影响

采用共浸渍法制备了添加不同Ce含量（相对于SiO₂的摩尔分数为0-20%）的Ce-Cu-Fe/SiO₂催化剂,在连续流动微型固定床反应器中考察了其催化CO加氢合成低碳醇反应的性能,并采用X射线衍射（XRD）、低温N₂吸附、程序升温还原（H₂-TPR）、CO吸附傅里叶变换红外光谱（CO-FTIR）和CO程序升温脱附（CO-TPD）技术对催化剂进行了表征.结果表吸:添加适量的Ce,一方面降低了Cu的晶粒大小,提高了Cu的分散度,进而提高了对CO的吸附能力;另一方面掺入的Ce和Cu之间存在相互作用,提高了CO解离和非解离吸附的能力,从而有利于CH_x的生成和CO的插入反应.上述两方面的共同作用同时提高了Cu-Fe/SiO₃催化剂的活性和醇的选择性.当Ce含量为10%时,在压力为3.0 MPa,温度为250℃,空速为6000 mL·g^-1·h^-1和H₂/CO摩尔比为2的反应条件下,Ce-Cu-Fe/SiO₂催化剂上醇的时空产率达到121.0 g·kg^-1·h^-1,比未添加Ce的Cu-Fe/SiO₂催化剂的时空产率(58.0 g·kg^-1·h^-1)提高了一倍以上.     

镧改性Cu/SiO2催化剂的乙酸甲酯高效加氢催化性能研究

采用蒸氨法制备了镧(La)改性的负载型铜硅(Cu/SiO₂)催化剂,并对其乙酸甲酯(MeOAc)气相加氢制乙醇(EtOH)的催化性能进行了研究。采用N₂吸附-脱附(N₂ adsorption-desorption)、X射线粉末衍射(XRD)、电感耦合等离子体发射光谱(ICP-OES)、氢气程序升温还原(H₂-TPR)、傅里叶红外光谱(FT-IR)、高分辨透射电镜(HRTEM)、光电子能谱(XPS)和原子发射光谱仪(AES)等手段对催化剂进行了的表征,发现La物种的加入产生了较多的层状硅酸铜,增强了Cu和La物种之间的相互作用。La物种的加入在结构方面提高了催化剂的比表面积,降低了铜物种的粒径,提高了铜物种的分散度;在电子还原调控方面提高了Cu⁺的含量,增强了催化剂吸附酰基和甲氧基的能力。与未改性的Cu/SiO₂催化剂相比,镧改性后Cu/SiO₂催化剂的乙酸甲酯加氢性能得到大幅提升;其中La掺杂量0.5%的Cu/SiO₂     

X-射线吸收谱原位表征Cu-Zn/SiO2催化剂Cu价态

铜基催化剂的价态组成与制备方法、还原温度有关,也是决定其催化性能的关键因素.本文对比研究Cu-Zn/SiO₂和Cu/SiO₂催化剂前驱体在不同还原温度下的价态组成及其醋酸甲酯加氢性能.采用同步辐射X射线吸收谱原位表征催化剂前驱体的Cu K边的X射线近边吸收谱（XANES）,通过线性组合分析方法（LCF）拟合XANES吸收谱得到了催化剂前驱体在不同还原温度下氧化态（Cu²⁺、Cu⁺）和金属态（Cu⁰）的组分含量.结果表明：（1）采用蒸氨法添加Zn制备的Cu-Zn/SiO₂催化剂前驱体铜组分还原度高;（2）催化剂前驱体在还原过程中Cu⁺主要存在于低温还原阶段（<250℃）,且Cu⁰+Cu⁺含量较低（≤ 40%）;（3）金属态铜是醋酸酯加氢反应的活性中心.     

硅源对蒸氨法制备Cu/SiO2催化剂催化甲醇裂解制氢的影响

采用蒸氨法制备Cu/SiO₂催化剂,分别考察气相二氧化硅（SiO₂-aer）、硅胶（SiO₂-gel）和碱性硅溶胶（SiO₂-sol）对Cu/SiO₂催化剂催化甲醇裂解制氢性能的影响,并采用N₂吸附-脱附、N₂O化学吸附、电感耦合等离子体原子发射光谱法（ICP-AES）、X射线衍射（XRD）、H₂程序升温还原（H₂-TPR）、透射电子显微镜（TEM）和X射线光电子能谱（XPS）等方法对催化剂进行表征。结果表明,硅源对Cu/SiO₂催化剂的活性具有较大影响。以碱性硅溶胶作为硅源制得的Cu/SiO₂-sol催化剂比表面积较大,活性中心粒径较小且分散均匀,这些使得其制氢性能优于其他两种硅源为载体所制备的催化剂。在反应温度280 ℃,反应压力1 MPa,甲醇质量空速0.6 h^-1的条件下,相较于Cu/SiO₂-aer和Cu/SiO₂-gel催化剂,Cu/SiO₂-sol催化剂的甲醇转化率分别提高10％和7％,气相副产物CH₄和CO₂浓度也有所降低,该催化剂上的甲醇转化率和气体收率分别达到98.4%和96.7%。     

糠醛气相加氢制备糠醇Cu/SiO2催化剂的失活机理研究

采用共沉淀法制备了Cu/SiO₂催化剂，在固定床反应器上评价其糠醛气相催化加氢制备糠醇的反应性能，并采用XRD、H2-TPR、ICP-OES、XPS、TG、Raman、TEM等手段对使用后的Cu/SiO₂催化剂进行表征，研究其在反应中的失活机理。在常压、反应温度140℃、质量空速2.4 h^-1、氢醛比9.7的条件下，反应5 h内糠醛转化率均高于97%；反应6-21 h，糠醛转化率从96%快速下降到32%，说明Cu/SiO₂催化剂在糠醛加氢反应中快速失活，失活的主要原因是活性组分铜的团聚烧结和催化剂表面上积炭覆盖了反应活性位。     

甲醇水蒸气重整制氢CuAl2O4催化材料的研究

以γ-Al₂O₃为原料采用原位合成法制备CuAl₂O₄催化材料，通过XRF、XRD、BET和H₂-TPR等手段对催化材料进行表征，考察铜铝物质的量比对CuAl₂O₄催化材料结构、性质及其催化甲醇水蒸气重整制氢性能的影响。结果表明，不同铜铝物质的量比主要影响了铜物种的还原性能，从而影响了其催化甲醇水蒸气重整制氢的性能。当铜铝物质的量比为1：2时，CuAl₂O₄催化材料的催化性能较好，在反应温度为260℃，水醇物质的量比为1.2，甲醇气体空速为800 h^-1时，甲醇转化率为100%，产氢速率为895 mL/（kg·s）。     

银离子修饰的介孔磷钨酸/二氧化硅催化剂氧化脱硫性能研究

采用银修饰介孔磷钨酸/二氧化硅（mesoporous HPW/SiO₂）催化剂,并研究了其在模拟柴油和真实柴油氧化脱硫反应中的催化性能。通过银修饰介孔HPW/SiO₂,结合银离子对有机硫化物的选择吸附性和HPW对有机硫化物的催化氧化活性,以达到选择氧化脱硫的目的。模拟柴油分别采用石油醚、苯、1-辛烯和二苯并噻吩配制,当银离子与HPW的摩尔比为2时,催化剂具有最高的选择催化氧化活性。采用N₂ 吸附-脱附、XRD、UV-vis和EDS表征了银修饰的介孔HPW/SiO₂催化剂,结果表明,银物种分散均匀且以Ag⁺形式存在。真实柴油的脱硫研究表明,相比介孔HPW/SiO₂催化剂,修饰的催化剂介孔Ag₂-HPW/SiO₂脱硫率提高了4.6%,初始硫含量为1800×10^-6的直馏柴油能被脱除至228×10^-6,脱硫率为87.3%。介孔Ag₂-HPW/SiO₂催化剂具有良好的再生性能,经再生处理后,Ag的损失量极少,其三次脱硫率达到84.8%。     

In-Co二元金属氧化物上CO2催化加氢反应的选择性转变:催化反应的机理和构效关系

采用催化加氢的方式将CO₂转化为甲醇,既可以减少CO₂排放,又制备了化学品,该反应具有重要的研究意义.氧化铟(In₂O₃)作为CO2加氢制甲醇催化剂,由于其较高的CO₂活化能力和甲醇选择性,被科研工作者广泛研究.其中,将具有良好解离H2能力的过渡金属元素引入In₂O₃(M/In₂O₃)是有效提高催化剂性能的策略之一,然而,M/In₂O₃体系催化CO₂加氢反应机理及活性位点仍不清楚.本文引入Co制备了In-Co二元金属氧化物催化剂应用于CO2加氢制甲醇,结果表明,相较于In₂O₃,In-Co催化剂性能有很大提升,其中In1-Co₄催化剂上甲醇时空产率(9.7 mmol·g_cat^-1 h^-1)是In₂O₃(2.2 mmol·g_cat^-1 h^-1)的近5倍(反应条件:P=4.0 MPa,T=300℃,GHSV=24000 cm³ _STP g_cat^-1 h^-1,H2/CO₂=3).值得注意的是,尽管Co是金属元素的主体,In-Co催化剂中Co催化CO₂甲烷化的活性受到明显抑制.本文还通过多种技术系统研究了催化剂结构与反应选择性转变间的关系.采用电感耦合等离子体发射光谱、粉末X射线衍射、拉曼光谱、X射线光电子能谱和透射电子显微镜等对催化剂结构以及表面性质进行了表征.结果表明,在H₂还原气氛诱导下,In-Co催化剂表面发生重构,形成以CoO为核,以In₂O₃为壳的核壳结构,其在高压反应后仍能保持稳定;更重要的是,该核壳结构可以显著增强In-Co催化剂吸附及活化CO₂的能力.CO₂加氢反应动力学研究表明,Co催化剂上H₂分压对CO₂加氢为零级反应,而H₂分压在In-Co上的反应级数为正数;In-Co催化剂上,CO₂分压的反应级数接近于零,表明CO₂及其衍生物在In-Co的表面吸附饱和,但在纯Co上,则不会发生这种饱和吸附.通过原位DRIFTS研究了催化反应路径和关键中间物种的吸附及反应行为,发现CO₂加氢在纯Co和In-Co上的催化机理均遵循甲酸盐路径.在该催化路径中,CO₂首先加氢为甲酸盐(*HCOO)物种,随后加氢为甲氧基(*CH₃O).*CH₃O在Co催化剂上进一步加氢生成CH₄,而*CH₃O在In-Co催化剂上则会脱附生成CH₃OH.根据表征结果,本文认为,在还原性气氛下,In-Co发生了重构并生成表面富In₂O₃的核壳状结构,显著提高了催化剂对CO₂和含碳物种的吸附能力.Co和In-Co催化剂对CO₂加氢反应选择性的差异归因于催化剂对CO₂和对*HCOO等含碳中间物种的吸附稳定性不同.CO₂及其衍生的含碳中间物种在In-Co催化剂上的吸附能力比在Co催化剂上强,形成了较合适的催化剂表面C/H比,从而使*CH₃O能够脱附为CH₃OH,而不是进一步加氢为CH₄.综上,本文研究为高活性In-Co催化剂体系在CO₂加氢反应中的催化机理及行为提供了解释,为金属-氧化铟(M-In₂O₃)催化剂体系的设计提供了参考.     

镓改性的铜基疏水催化剂用于CO2选择性加氢制二甲醚的研究(英文)

CO₂选择性加氢制二甲醚(DME)是实现CO₂资源化利用的重要途径之一.然而,该过程面临着多方面的挑战.比如,水分子会限制CO₂的高效转化并诱导铜颗粒的团聚,导致催化活性与稳定性不足.此外,沸石分子筛甲醇脱水催化剂的酸性过强容易造成甲醇过度脱水生成低碳烃,导致催化选择性不足.因此,开发高效稳定的CO₂加氢制DME催化剂十分必要.本文通过共水解法制备了一系列镓改性的疏水二氧化硅负载铜基催化剂,并通过优化疏水基团含量以及铜与镓的比例来进一步提高催化性能.通过X射线衍射、氢气程序升温还原、X射线光电子能谱和CO吸附红外光谱等方法进行表征,结果表明,镓物种对铜纳米颗粒的电子结构进行了调控,提升了催化剂上Cu^δ+物种的含量,从而抑制了逆水煤气转换反应,实现了CO选择性的降低.此外,水蒸气等温吸附、水蒸气程序升温脱附和水滴接触角测试等结果表明,引入疏水甲基基团可以调控催化剂表面的浸润性,提升水分子的扩散速率并抑制其二次吸附.在镓改性和甲基基团疏水修饰的协同作用下,Cu/Ga-SiO     

磷化镍催化剂的制备机理及其加氢脱氮性能

采用热重-质谱联用技术研究了次磷酸盐在氮气中的热分解过程,探讨了次磷酸盐热分解法制备磷化镍的反应机理:次磷酸镍中的Ni²⁺能够"催化"H₂PO₂^-低温发生歧化反应生成PH₃,继而还原Ni²⁺得到Ni₂P。制备了不同负载量的Ni₂P/SiO₂催化剂,用X射线衍射(XRD)、低温N₂吸附-脱附、高分辨透射电镜(HRTEM)等分析技术对催化剂结构进行表征。结果表明,Ni₂P活性组分在SiO₂载体上具有良好的分散性,颗粒粒径为5～8 nm。以喹啉为加氢脱氮模型化合物,在高压微型固定床反应器上对催化剂活性进行评价,在反应温度为360℃、氢气压力为2.0 MPa、液时空速为2.0 h^-1、氢油体积比为500:1时,Ni₂P(20%)/SiO₂催化剂的加氢脱氮率为41.5%。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。