钙离子对表面活性剂单层膜聚集结构的影响

采用分子动力学模拟研究了气液界面上钙离子对阴离子表面活性剂十二烷基苯磺酸钠单层膜聚集结构的影响.结果表明,单层膜结构与表面覆盖度及Ca2＋离子存在与否均有关系.Ca2＋离子能够压缩表面活性剂极性头使聚集结构排列更加紧密,均力势体现了Ca2＋离子与极性头之间的结合能力强弱,二者之间的相互作用与稳定的溶剂分离极小值有关,而Ca2＋离子需要克服一个溶剂能障才能与之发生相互作用,并引起极性头周围水分子结构的重排.模拟表明,分子动力学方法可以在分子水平上研究无机盐离子对表面活性剂单层膜水化结构的影响,解释无机盐离子在界面膜中的动力学行为.     

亚苄基山梨醇衍生物在有机溶剂中的自组装及凝胶化研究

从分子结构的差异、亲溶剂作用、分子几何构型、相转变热焓以及溶剂极性等方面研究了三种亚苄基山梨醇衍生物凝胶剂在有机溶剂中的自组装和凝胶化机理. 三种衍生物凝胶剂在结构上的差别仅在于亚苄基上甲基取代基数量不同. 结果表明: 由于亲溶剂作用的增加和分子几何构型的优化, 含甲基多的凝胶剂在有机溶剂中的自组装能力强, 表现在具有低的最低凝胶化浓度和高的相转变温度. 而溶剂极性的增强, 使三种衍生物凝胶剂形成的凝胶相转变温度降低. 偏光显微镜照片表明该凝胶剂在正辛醇凝胶中的聚集体晶型不同. 场发射扫描电镜照片表明三种衍生物凝胶剂自组装形成相互缠绕的纤维束网络结构. 紫外吸收光谱表明, 对比其溶液态, 三种衍生物聚集体苯环的K带发生红移, 表明π-π堆积作用是亚苄基山梨醇衍生物凝胶剂自组装的驱动力之一; 红移的幅度随苯环上甲基数量的增加而增加, 这与三种衍生物形成的分子凝胶的热稳定性相吻合.     

压缩速度对Surfactin在单分子膜内聚集行为的影响

研究了一种微生物脂肽——Surfactin(表面活性素)在气/液界面形成的单分子膜性质, 测定了压缩速度对其单分子膜的表面压-分子面积(π-A)曲线的影响. 结果表明, Surfactin单分子膜铺展在pH＝2酸性亚相上的过程是一个亚稳过程. 通过原子力显微镜(AFM)观察了不同压缩速度时在25 mN•m－1下转移的Langmuir-Blodgett (LB)膜. 在中等压缩速度(0.6 nm2•mol－1• min－1)时转移的LB膜表面观察到分布均匀、排列规则、类似球形的表面聚集体, 而在其它压缩速度下, 形成了按一定规则分布的表面团簇结构. 结合π-A曲线和AFM图像, 提出了Surfactin表面聚集体在气/液界面上的形成机制.     

酸度对2-十八胺基甲酰基-8-羟基喹啉成膜性能的影响

两亲分子的成膜性能的研究主要集中在以羧基、磺酸基、磷酸基和第四铵盐等为亲水头基的化合物[1 ,2 ] ,而对亲水头基中兼有酸、碱性基团的两亲配体研究很少 ,本文报道了我们合成的一种新型两亲配体 2 -十八胺基甲酰基 - 8-羟基喹啉 (以下简写为 HL)在不同 p H的亚相溶液中单分子膜的形成。结果表明 ,HL在酸性亚相中不易成膜 ,而在碱性亚相中成膜性能较好 ,单分子膜由膨胀型向压缩型转变。并且讨论了亚相 p H对 HL单分子膜崩溃压的影响 ,以及 8-羟基喹啉头基在气 /液界面上的离解 -缔合情况。实　验　部　分一 .试剂与仪器2 -十八胺基甲…     

亚相pH对气水界面上VE/DPPC单分子膜的影响

通过表面压－分子面积等温线的测定，考察了亚相ｐＨ对气水界面上的维生素Ｅ（ＶＥ）／二棕榈酰基磷脂酰胆碱单分子膜的影响。亚相ｐＨ降低不改变ＤＰＰＣ单分子膜的崩裂压，但使ＶＥ单分子膜的崩裂压明显增大，不改变ＶＥ单分子膜的平均分子面积，但使ＤＰＰＣ单分子膜凝缩，低表面压下，ＶＥ对ＤＰＰＣ单分子膜的膨胀作用在纯水上很小，在ｐＨ为１的亚相上则很明显，这提示在低ｐＨ的亚相上，ＶＥ／ＤＰＰＣ单分子膜中的极性头基间     

气/液界面Langmuir单分子膜的原位拉曼光谱

提出了一种原位测量气/液界面Langmuir单分子膜拉曼光谱的新方法, 即利用SERS技术, 通过降低亚相的方法来获得气/液界面Langmuir单分子膜的原位拉曼光谱. 利用这种方法, 用原位拉曼光谱测量系统得到了信噪比较好的十八胺及二棕榈酰磷脂酰胆碱单分子膜的拉曼光谱, 在分子水平上获取了单分子膜中的结构信息.     

双头基两亲分子在气液界面的Langmuir铺展膜结构

用表面压-面积等温线,原子力显微镜（AFM）和X射线衍射（XRD）对两种具有不同取代位置的新型双头基两亲分子（bolaamphiphile）A和B在气液界面形成的Langmuir铺展膜的结构进行了研究,化合物1,20-二十碳二β-萘酯（B）在气液界面形成了拉伸型 Langmuir单分子膜,而化合物1,20-二十碳二α-萘酯（A）在气液界面则形成了具有三层分子厚度的二维结晶膜.     

十八胺单分子膜的研究

通过测定在纯水和CdCl2溶液亚相上十八胺单分子膜的平衡、循环π～A等温线及其动态弹性,发现在亚相中加入Cd2+可以使膜的液态相凝聚性增强,固态相凝聚性减弱.液态的单分子膜在两种亚相上有较好的可回复性,而在固态膜中则不然.这可归因于在水面上十八胺分子间可形成氢键,而在CdCl2水溶液亚相上的十八胺则与Cd2+发生配位,形成了多配位络合物,两种情况下十八胺分子在高膜压区都会发生稳定的聚集.静、动态弹性的比较表明,膜障的振动不利于十八胺分子与Cd2+间的配位作用.     

微生物脂肽与磷脂的混合单分子膜性质

研究了一种微生物脂肽--表面活性素与二肉豆蔻酰磷脂酰胆碱(DMPC)在气,液界面形成的混合单分子膜性质.测定了混合单分子膜的表面压.分子面积(л-A)曲线,根据л-A曲线获得了不同表面压下混合单分子膜的过剩面积(Aex)和混合过剩自由能(△Gmex)与混合单分子膜中表面活性素摩尔分数的关系.Aex和△Gmex的计算结果均表明,表面活性素与DMPC在纯水亚相上形成的混合单分子膜中不相容,二者之间 的相互作用主要是排斥力.通过原子力显微镜观察了在表面压15mN/m下的混合单分子膜的LB膜,发现表面活性素与DMPC发生了微相分离,说明二者在混合膜中的烷基链取向不同,这可能是二者发生排斥作用的主要原因之一.此外,还研究了亚相pH对混合单分子膜相容性的影响,发现表面活性素与DMPC在混合单分子膜中的相容性在碱性环境下增强,这可能与二者极性头基之间的相互作用有关.     

含双疏水链阴离型两性分子单分子膜的聚集行为

单分子膜在水面上的聚集状态与膜分子的亲水基间的静电排斥作用和疏水基间Van der Waals引力的相对大小有关.在293K亚温度下,2C~nSN~a单分子膜聚集行为的电子显微研究表明,n=12时呈非晶性单分子;n=12时在较高的表面压下形成结晶性单分子膜;n=16时可在表面压为0mN.m^-1的情况下形成结晶性单分子膜.FT-IR和透射电镜对单分子膜聚集结构的解析结果相互一致.本文还讨论了压缩速度对单分子膜π-A等温线的影响.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.