层状双金属氢氧化物的制备及其应用研究

层状双金属氢氧化物是一类新型的无机功能材料,具有特殊的层状结构和优异的物理化学特性,已成为当前研究的热点。介绍了层状双金属氢氧化物的结构与性质,特别分析了层状双金属氢氧化物的制备方法及其在催化材料、吸附材料、生物医药材料、光电功能材料等方面的应用研究进展,并对其在未来的发展方向进行了展望。     

碳基纳米材料对水环境中放射性元素铀的吸附

放射性元素铀既是核燃料的主要成分又是核废料后期处理的关键元素,对环境造成潜在的污染,铀的污染治理研究对治理核污染有着重要的现实意义。本文针对碳纳米管、石墨烯以及其他碳基纳米材料对水体环境中放射性元素铀的吸附研究进行了概述和展望,包括碳基纳米材料的制备方法、去除效果和吸附机理。此外,针对纯碳材料对铀吸附量低等问题,提出并归纳了多种表面改性及复合方法。总之,制备高效低成本的碳基纳米吸附材料,提高碳基纳米材料对复杂条件下放射性元素的高效处理能力,将成为今后重点研究方向。     

铀酰离子在羟基化α-石英(101)表面的吸附

采用周期性密度泛函理论研究羟基化α-石英(101)面的铀酰离子吸附行为.通过对铀酰离子的水合作用考虑水溶剂对结构的短程溶剂化效应,并通过类导体屏蔽模型(COSMO)考虑水溶剂对结构的远程溶剂化效应.吸附能计算结果和电子结构数据均表明水合铀酰离子吸附构型比氢氧化铀酰吸附构型稳定,并且在液相中两种类型的稳定吸附位均为dia-Os1Os2位.两种形式在电子结构上有很大的差异,主要是由于铀与表面作用后成键强弱程度不同,使5f轨道宽化和略微红移存在差异.在铀酰离子吸附的基础上利用卤素离子改变铀酰离子配位环境可调整体系的带隙.     

铀酰配合物单晶的合成与结构

铀作为重要的核材料,是核燃料循环中最受关注的元素之一。在铀的开采、纯化以及应用等过程中,不可避免地会产生铀的释放。环境中的无机酸根及土壤有机质的羧酸根可与铀形成配合物,从而可能影响其迁移与吸附行为。通过研究铀酰配合物晶体的结构可以为吸附或迁移模型以及从分子水平探讨吸附机理提供结构参数。本文综述了国际上铀酰固体化学领域的研究进展,阐述了铀酰配合物的结构特点,铀酰无机含氧酸、过氧及草酸配合物的合成与晶体结构。在对国内外主要开展铀酰配合物晶体研究的课题组之研究工作进行归纳和分析的基础上,提出铀酰配合物研究的思路和建议,以期为国内锕系元素固体化学研究工作的开展提供参考。     

铀酰离子在羟基化α-石英(101)表面的吸附

采用周期性密度泛函理论研究羟基化α-石英（101）面的铀酰离子吸附行为. 通过对铀酰离子的水合作用考虑水溶剂对结构的短程溶剂化效应,并通过类导体屏蔽模型（COSMO）考虑水溶剂对结构的远程溶剂化效应. 吸附能计算结果和电子结构数据均表明水合铀酰离子吸附构型比氢氧化铀酰吸附构型稳定,并且在液相中两种类型的稳定吸附位均为dia-O_s1O_s2位. 两种形式在电子结构上有很大的差异,主要是由于铀与表面作用后成键强弱程度不同,使5f 轨道宽化和略微红移存在差异. 在铀酰离子吸附的基础上利用卤素离子改变铀酰离子配位环境可调整体系的带隙.     

一种偕胺肟基纤维材料对模拟盐湖水中铀的吸附研究

本文采用预辐射接枝法在7 L固液接枝反应釜中批量制备了偕胺肟(AO)基的超高分子量聚乙烯(UHMWPE-g-(PAO-co-PAA))纤维吸附材料,用红外光谱和扫描电子显微镜表征了材料的功能基团和表观形貌,研究了该材料在模拟盐湖水中对铀酰离子的吸附行为,并考察了溶液矿化度(TDS)、铀酰离子初始浓度等因素对材料吸附行为的影响.在TDS、溶液pH 8.1和铀酰初始浓度与西藏达则错盐湖相当的模拟盐湖体系中,AO含量为6.0 mmol g~(-1)的材料在28 d后对铀的吸附量高达8.29 mg g~(-1).铀酰离子的吸附量随TDS增加而有所降低,在TDS相当于海水10倍的pH 8.1模拟盐湖水中,铀的吸附量仍然达到6.63 mg g~(-1).材料对铀酰离子的吸附量随其初始浓度的增加而增大,在pH 8.1的模拟盐湖水中当铀浓度由187增加到1639μg L~(-1),其吸附量由4.54增加到17.48 mg g~(-1).结果表明,UHMWPE-g-(PAO-co-PAA)纤维材料在盐湖体系铀的提取中具有很好的应用前景.     

新型Mg-Al吸附剂去除压水堆核电厂废水中高浓度硼

通过特定的焙烧过程制备了不含碳酸根的Mg-Al型层状双金属氧化物. 该层状双金属氧化物在废水中可水解为层状双金属氢氧化物, 从而能够通过四级串联吸附处理的方式将模拟核电厂含硼废水中的硼浓度由初始的2000 mg/L显著降低至10 mg/L, 满足内陆拟建核电厂需要将含硼废水硼浓度处理至30 mg/L以下的技术要求. 在pH=10.61, 固液比为1/40 g/mL, 吸附温度为20 ℃条件下, 吸附剂的硼吸附量可高达39.64 mg/g. 此外, 还在分子层次上讨论了中间氧化物的形成机理以及其水解生成层状双金属氢氧化物的机理, 探讨了核电厂高浓度含硼废水的pH值、 初始硼浓度、 吸附剂用量和搅拌时间等条件对吸附剂硼吸附性能的影响.     

功能性纳米零价铁的构筑及其对环境放射性核素铀的富集应用研究进展

随着核能的广泛应用和核技术的快速发展,环境中放射性核素铀的污染日益严峻.纳米零价铁（Nanoscale Zero Valent Iron：nZVI）因其具有廉价、制备简便、高表面活性及对铀高效的吸附性能等特性而逐渐成为环境中铀污染处理的良好材料.采用可行的方法制备纳米零价铁复合材料,借助单体材料之间的协同效应可进一步提高材料对铀酰的吸附性能.因此,纳米零价铁复合材料的制备以及应用成为近期环境科学领域的研究热点之一.针对纳米零价铁及其复合材料对环境中铀酰的去除研究进行了概述和展望,包括纳米零价铁及其复合材料的制备方法、去除效果及去除机理,并且简要探讨了纳米零价铁及其复合材料在环境放射性污染治理的应用前景,以期为今后的深入研究和实际应用提供参考依据.     

层状双金属氢氧化物在绿色材料领域中的应用

层状双金属氢氧化物(LDHs)由于其特殊的二维平面层状结构和良好的生物兼容性(低毒性),可以和不同材料杂化形成生态环境友好的纳米复合材料,广泛应用在生物分子的贮存、药物输送载体、有机催化、环境污染物的吸附去除以及光、电、磁等方面。本文介绍了LDHs的结构、制备、性能以及在绿色材料领域的应用研究进展,并对LDHs在绿色材料领域的发展方向进行了展望。     

锌铝层状双金属氢氧化物焙烧物对钢筋的缓蚀作用研究

在空气气氛下合成了锌铝层状双金属氢氧化物(Zn-Al LDHs)和焙烧物(Zn-Al CLDHs),扫描电镜结果表明,所制得的双金属氢氧化物具有明显的层状结构. 文中研究了Zn-Al CLDHs 对钢筋的腐蚀保护效果,Zn-Al CLDHs固体在NaCl 溶液中浸泡处理3 h 后,钢筋的腐蚀速率显著降低. 实验证明,Zn-Al CLDHs 在结构重组过程中可吸收溶液中的Cl^-,同时释放出OH^-,改善腐蚀环境,有效抑制钢筋的腐蚀.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Investigation of Kinetics of Solid-Phase Synthesis of Lithium Orthosilicate

The kinetics of the interaction between lithium carbonate and silica with various degrees of dispersion was investigated by TG and DTA methods. It was found that the utilization of pyrogenic silica with a specific surface area of about 300 m²g^-1 instead of aerosil with one of 175 m²g^-1 leads to an increase of the reaction rate between lithium carbonate and silica, which depends on the formation and growth of lithium orthosilicate crystals in the first stage, and is conditioned by the diffusion of lithium and oxygen ions through the lithium orthosilicate layer formed at temperatures above 800 K. This supposition is supported by the kinetic analysis results obtained with the use of the different models. The optimal regime of heating is recommended. This revised version was published online in July 2006 with corrections to the Cover Date.     

小环化合物中饱和碳质子化学位移的计算

小环化合物由于其张力、构型、构象和各向异性效应等原因,环碳上质子化学位移缺乏规律性,难以预测,对此作者曾提出一种近似算法。本文根据303种小环化合物中饱和碳质子的化学位移实验数据,将适于计算这类质子化学位移的公式表述为:     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.