南极岩石样品中稀土元素的中子活化分析

用仪器中子活化分析技术,测定了南极岩石中8种稀土元素含量,讨论了不同岩石的稀土模式特点。     

NAA and ICP analysis of obsidian from Central Europe and the Aegean: Source characterisation and provenance determination

INAA and ICPES are compared for their discriminative power in obsidian source characterisation. Geological samples from the Aegean and Carpathian sources were analysed for Na, Sc, Fe, Co, Rb, Sb, Cs, Ba, La, Ce, Sm, Eu, Tb, Yb, Lu, Hf, Ta, Th, U by INAA and for B, Na, Mg, Al, K, Ca, Sc, Ti, Mn, Fe, Zn, Y, Yr, Cs, Ba, La, Ce, Sm, Eu, Gd, Tb, Yb, Lu, Hf by two ICPES procedures. It is shown that all techniques work successfully, however, INAA is more efficient in the chemical discrimination of neighbouring sources.     

Radioanalytical methods for the non-destructive analysis of lunar samples

The elemental compositions of Apollo 11 and Apollo 12 lunar soil samples 10084,141 and 12070,83 and Apollo 12 rock fragment 12063,73 were determined by non-destructive radioanalytical methods. Main mineral fractions and glasses separated from these samples were analyzed as well. Instrumental neutron activation analysis (INAA) was used to determine Na, Mg, Al, Si, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Zr, Cs, Ba La, Ce, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Tm, Yb, Lu, Hf, Ta, W, Ir, Au, Th and U. A method of delayed neutron counting was used for the determination of uranium, and non-dispersive radioisotopic X-ray fluorescence analysis was applied to the determination of Ti, Fe, Sr, Y and Zr.     

57Fe Mössbauer spectroscopy of banded iron formations from eastern India

Samples of the mosses Hylocomium splendens and Pleurozium schreberi, collected in the summer of 1998, were used to study the atmospheric deposition of heavy metals and other toxic elements in the Chelyabinsk Region situated in the South Urals, one of the most heavily polluted industrial areas of the Russian Federation. Samples of natural soils were collected simultaneously with moss at the same 30 sites in order to investigate surface accumulation of heavy metals and to examine the correlation of elements in moss and soil samples in order to separate contributions from atmospheric deposition and from soil minerals. A total of 38 elements (Na, Mg, Al, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Zn, As, Se, Rb, Sr, Zr, Mo, Sb, Cs, Ba, La, Ce, Nd, Sm, Eu, Gd, Tb, Dy, Yb, Hf, Ta, W, Au, Th, U) in soil and 33 elements Na, Mg, Al, Cl, K, Ca, Sc, V, Cr, Mn, Fe, Co, Ni, Zn, As, Se, Br, Rb, Ag, Sb, Cs, Ba, La, Ce, Sm, Tb, Yb, Hf, Ta, W, Au, Th, U) were determined by epithermal neutron activation analysis. The elements Cu, Cd and Pb (in moss samples only) were obtained by atomic absorption spectrometry. VARIMAX rotated principal component analysis was used to identify and characterize different pollution sources and to point out the most polluted areas.     

Determination of elements in SRM soil 2709a by neutron activation analysis

A combination of instrumental neutron activation analysis (INAA) and prompt gamma-ray activation analysis (PGAA) was used to value assign 35 elements in SRM soil 2709a (San Joaquin Soil). INAA with counting of short-lived radioisotopes was used for determination of Al, Au, Ca, Dy, K, Mg, Mn, Na, Ti, and V. Elements determined by INAA with counting of intermediate and long-lived radioisotopes included As, Ba, Ce, Co, Cr, Cs, Eu, Fe, Hf, La, Lu, Nd, Rb, Sb, Sc, Sm, Sr, Ta, Tb, Yb, Zn, and Zr. Thermal neutron PGAA was used for the determination of H, B, Si, K, Ti, Mn, Fe, Cd and Gd. Expanded uncertainties were determined for all values reported.     

Characterization of deep sea sediments by INAA for radioactive waste management purposes

An instrumental neutron activation analysis method, using both reactor flux and epi-cadmium neutrons, has been developed for the determination of major, minor and trace elements in sub-seabed sediments. The method involves two different irradiations followed by three different counting periods using high-resolution Ge(Li) and low-energy photon detectors. The list of elements determined includes Ag, Al, As, Ba, Br, Ca, Ce, Cl, Co, Cr, Cs, Dy, Eu, Fe, Ga, Gd, Hf, Hg, I, In, K, La, Lu, Mg, Mn, Mo, Na, Nd, Ni, Pt, Rb, Re, Rh, Sb, Sc, Se, Si, Sm, Sn, Sr, Ta, Tb, Th, Ti, Tm, U, V. W, Yb, Zn, and Zr. The accuracy of the method has been evaluated by analyzing four different standard reference materials. The method has been applied to core samples collected from the Great Meteor East and the South Nares Abyssal Plain which are being evaluated as potential sites for the possible disposal of vitrified highly active waste.     

Multielement standards in routine reactor neutron activation analysis

The application of multielement standards (MES) in routine neutron activation analysis brings a whole range of advantages. This paper deals with the experience obtained during many years of application of these MES. Nine of these MES contain a total of 50 elements in suitable combinations and concentrations; thus, the determination of most of the common elements by NAA can be carried out simultaneously. This refers to the following elements: Na, Mg, Al, Cl, K, Ca, Sc, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Se, Br, Rb, Sr, Mo, Ag, Cd, In, Sb, Te, Cs, Ba, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Hf, W, Re, Au, Hg, Th and U. For the determination of the remaining elements such as Zr, Ta, Ir etc., single element standards (SES) are used.     

Determination of elemental levels in radiopharmaceuticals by instrumental neutron activation analysis

Instrumental neutron activation analysis (INAA) was applied to thedetermination of the concentration levels of Na, Mg, Al, Cl, K, Sc, Ti, V,Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Br, Rb, Sr, Zr, Mo, Ag, Cd, Sb, I, Cs,Ba, La, Ce, Nd, Sm, Eu, Tb, Dy, Yb, Lu, Hf, Ta, Hg, Th and U in three radiopharmaceuticals.The irradiation of the samples was carried out in a 0.5 kW Bariloche RA-6Research Nuclear Reactor and the induced gamma-activity was measured by gamma-spectrometry.INAA proves to be an accurate and precise technique to obtain a quick informationon the concentration levels of several minor and trace components in radiopharmaceuticals.The quantification of heavy toxic elements is required for the registrationof radiopharmaceuticals.     

Strategy for water analysis using ICP-MS

The developed strategy permits determination in three steps of sixty-seven elements using inductively coupled plasma mass spectrometry (ICP-MS). Sodium, Mg, Si, S, Cl, K, and Ca are determined in a first step; B, Al, P, Cr, Fe, Mn, Ni, Cu, Zn, As, Se, Ag, Cd, Sb, Ba, Hg, and Pb are determined in a second step; and Li, Be, Ti, V, Co, Ga, Ge, Br, Rb, Sr, Y, Zr, Nb, Mo, Sn, Te, I, Cs, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Hf, Ta, W, Pt, Au, Tl, Bi, Th, and U are analyzed in a third step. The figures of merit obtained are adequate to carry out water quality monitoring and other hydrochemical studies, such those based in the application of hydrochemical fingerprinting to water management.     

Resonance neutrons for determination of elemental content of moss,lichen and pine needles in atmospheric deposition monitoring

Experience in the use of epithermal neutron activation analysis (ENAA) in the monitoring of atmospheric deposition by means of moss, lichens and pine needles is summarized. It is shown that 45 elements (Mg, K, Ca, Al, Cl, Sc, V, Cr, Mn, Fe, Co, Ni (using (n,p)-reaction), Zn, Cu, As, Se, Br, Rb, Sr, Zr, Mo, Ag, Sn, Sb, I, Cs, Ba, La, Ce, Nd, Sm, Eu, Gd, Tb, Tm, Yb, Lu, Hf, Ta, W, Au, Th and U, as well as Ir and Re in pine needles in the presence of anthropogenic pollution by the nickel mining plant) are reliably determined. Examples of the use of lichens, moss and pine needles as biomonitors of atmospheric deposition in Franz Josef Land the Kola peninsula and in the Tver region are given.     

Elemental content in wheat products of Al-Qusim region, Saudi Arabia using the INAA technique

Wheat is one of the most grown crops in Saudi Arabia. It is grown in various regions of the country. Accurate knowledge of the elemental concentrations in wheat and its products (bran and flour) is of great importance from a nutritional point of view. Wheat samples were obtained from the Al-Qusim region, 300 km northwest of Riyadh, and analyzed. Up to 50 elements (Al, Sb, As, Ba, Br, Cd, Ca, Cs, Cl, Cr, Co, Cu, Ga, Au, Hf, In, I, Ir, Fe, Mg, Mn, Hg, Mo, Ni, K, Rb, Sc, Se, Ag, Na, Sr, Ta, Te, Th, Sn, Ti, W, U, V, Zn, Zr, Ce, Dy, Eu, La, Lu, Nd, Sm, Tb and Yb) were determined in the wheat products. It was observed that the elemental content of bran was much higher than that of white flour.     

Determination of 34 elements in Chinese geochemical standard reference materials by instrumental neutron activation analysis

Thirty four elements (Al, As, Ba, Br, Ca, Ce, Co, Cr, Cs, Dy, Eu, Fe, Gd, Hf, Ho, K, La, Lu, Mg, Mn, Na, Nd, Rb, Sb, Sc, Sm, Ta, Tb, Th, Ti, U, V, W, Yb) were determined by instrumental neutron activation analysis in the second set of Chinese geochemical standard reference materials (sediments from GSD-9 to GSD-12, soils from GSS-1 to GSS-8, rocks from GSR-1 to GSR-6) using both thermal and epithermal irradiations. Irradiation schemes designed to utilise short, medium and long-lived nuclides were employed in order to analyse major, minor and trace elements with different half-lives. The gamma-ray spectra were measured by Ge(Li) and HP(Ge) detectors. Relevant nuclear data and possible interferences are listed, and analytical results are presented and discussed.     

Determination of 30 elements in coal and fly ash by thermal and epithermal neutron-activation analysis

Thirty elements are determined in coal and fly ash by instrumental neutron-activation analysis using both thermal and epithermal irradiation. Gamma-ray spectra were recorded 7 and 20 days after the irradiations. The procedure is applicable to the routine analysis of coals and fly ash. Epithermal irradiation was found preferable for the determination of Ni, Zn, As, Se, Br, Rb, Sr, Mo, Sb, Cs, Ba, Sm, Tb, Hf, Ta, W, Th and U, whereas thermal irradiation was best for Sc, Cr, Fe, Co, La, Ce, Nd, Eu, Yb and Lu. Results for SRM 1632 (coal) and SRM 1633 (fly ash) agree with those of other investigators.     

Investigation of the vertical distribution of major and trace elements in Matita Lake (Danube Delta) sediments by activation analysis

The vertical profiles of two major elements (Na and Ca) and 24 trace elements (Rb, Cs, Sr, Ba, Sc, La, Ce, Sm, Eu, Tb, Yb, Lu, Th, U, Hf, Nb, Ta, Cr, Fe, Co, Zn, As, Sb and Br) have been investigated by neutron activation analysis in a 2.5 m core collected from the Danube Delta, Matita Lake. The data have been correlated with the concentrations of five major minerals (calcite, dolomite, feldspar, clay and quartz) as determined by X-ray diffration. This study revealed the presence of As, Sb and Br as pollutant microelements.     

Determination of 32 elements in rocks by neutron activation analysis and high resolution gamma-ray spectroscopy

Neutron activation analysis and Ge(Li) spectroscopy was used to determine 32 elements in seven U.S.G.S. standard rocks of a wide range of composition. Short half-life nuclides (10 sec-10 min) were used to measure Sc, Hf, Dy, Mg, Al, Ca, Ti, V (and Na) in an automated rabbit Ge(Li) detector system. The elements K, Cu, Zn, Ga, Sr, Ba, La, Eu, Sm (and Mn) were determined by dissolution of the irradiated sample followed by removal of²⁴Na on hydrated antimony pentoxide (HAP). Long-lived nuclides were used to measure Sc, Cr, Fe, Co, Zr, Rb, Sb, Cs, Ba, Ce, Eu, Yb, Tb, Lu, Hf, Ta and Th after decay of²⁴Na. The method involves little radiochemistry and the separation is selective for²⁴Na under the experimental conditions used. Elemental concentrations determined agree well with previously published data.     

Intercomparison of moss reference material by different multi-element techniques

An intercomparison of data obtained for a moss reference material (Hylocomium splendens) used as biomonitor of atmospheric deposition by different multi-element techniques is presented. In total 43 elements (Na, Mg, Al, Cl, K, Ca, Sc, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Br, Rb, Sr, Zr, Ag, Sn, Sb, I, Cs, Ba, La, Ce, Nd, Sm, Eu, Gd, Tb, Tm, Yb, Lu, Hf, Ta, W, Au, Th, U) were determined using inductively coupled plasma-mass spectrometry (ICP-MS), conventional instrumental neutron activation analysis (INAA), epithermal neutron activation analysis (ENAA) and as well as shorttime neutron activation analysis without and with a⁶LiD-converter. Advantages and drawbacks of each method are discussed. The introduction of moss reference materials for atmospheric multi-element deposition studies involving nuclear analytical techniques is strongly recommended.     

Multielement analysis of Northwestern Nigerian rocks by instrumental neutron activation analysis

Rock samples from seven different locations in northwestern Nigeria were analyzed by reactor instrumental neutron activation analysis and Ge(Li) gamma-ray spectrometry. Concentration values were obtained for 18 elements (As, Ce, Co, Cr, Cs, Eu, Fe, Hf, La, Lu, Sc, Sm, Sr, Ta, Tb, Th, U, Yb). The geochemical implications of the results are discussed.     

Determination of impurities in natural diamonds using neutron activation and high-resolution gamma-spectrometry

Thirty-five natural diamonds from six widely differing localities, weighing from 3.6 mg to 305.3 mg were subjected to instrumental neutron activation analysis using high-resolution semiconductor gamma-spectrometry. By means of short-term and long-term activation in a nuclear reactor, Na, Sc, Cr, Mn, Co, La, Ce, Sm, Eu, Hf, Au, Hg, and Th were determined in all the samples, K, Sr, Ag, Cs, Ba, Yb, Lu and W in some, and qualitative determination was carried out with Ca, Fe, Ni, Ga, As, Zr, Sb, Tb, Dy, Ta, It and U. The study serves as a basis for the study of the relationship between the colour, morphology and luminescence of diamonds and their impurity contents.     

Determination of impurities in titanium and titanium oxide by radiochemical neutron activation analysis

A radiochemical neutron activation analysis has been applied to 2N–4N grade titanium metal and its oxide. Twenty two impurities were separated in a group from scandium by a radiochemical separation method using cation exchange resin with HBr and HCl. The contents of the elements were calculated by a single comparator method using two monitors. The analytical results agree well within 10% deviation with those obtained by instrumental method. Eighteen elements, Na, Fe, Co, As, Se, Sr, Mo, Sb, La, Eu, Tb, Yb, Lu, Hf, Ta, W, Th and U, are determined in titanium oxides and 17 elements, Na, Cr, Fe, Co, Se, As, Zr, Mo, Sb, Cs, Ce, Tb, Yb, Hf, Ta, W and Th, in titanium metals.     

Major,minor and trace element mass fractions determined using ED-XRF,WD-XRF and INAA for five certified clay reference materials: NCS DC 60102–60105; NCS DC 61101 (GBW 03101A, 03102A, 03103, and 03115)

Major, minor and trace element mass fractions were determined using wavelength dispersive and energy dispersive X-ray fluorescence and instrumental neutron activation analysis for five clay certified reference materials (NCS DC 60102–60105, 61101) distributed by the National Research Center for Certified Reference Materials in China. We report mass fractions for 10 major and the following 29 minor and trace elements: As, Ba, Ce, Co, Cr, Cs, Cu, Eu, Hf, La, Lu, Nb, Nd, Ni, Pb, Rb, Sb, Sc, Sm, Sr, Ta, Tb, Th, U, V, Y, Yb, Zn, and Zr.