Beryllium(II) complexes of the Kläui tripodal ligand cyclopentadienyltris(diethylphosphito-p)cobaltate(-)

The interactions of the beryllium(II) ion with the cyclopentadienyltris(diethylphosphito-P)cobaltate monoanion, L(-), have been investigated, in aqueous solution, by synthetic methods, potentiometry, ESMS, and (1)H, (31)P, and (9)Be NMR spectroscopy. L(-) has been found able to displace either two or three water molecules in the beryllium(II) coordination sphere, to form mononuclear, dinuclear, and trinuclear derivatives, in which the metal ion is pseudotetrahedrally coordinated. The species [BeL(H(2)O)](+) and [Be(2)L(2)(mu-OH)](+) have been identified in solution while complexes of formula BeL(2) and [Be(3)L(4)](ClO(4))(2) have been isolated as solid materials. The species [BeL(OPPh(2))](+), closely related to [BeL(H(2)O)](+), has been characterized in acetone solution and isolated as tetraphenylborate salt. The structure of the unusual trimeric complex [Be(3)L(4)](2+) has been elucidated by an unprecedented 2D (9)Be-(31)P NMR correlation spectrum showing the presence of a single central beryllium nucleus and two equivalent terminal beryllium nuclei. The three beryllium centers are held together by four cobaltate ligands, which display two different bonding modes: two ligands are terminally linked with all the three oxygen donors to one terminal beryllium, and the other two bridge two metal centers, sharing the oxygen donors between central and terminal beryllium atoms.     

Different complexation properties of some hydroxy keto heterocycles toward beryllium(II) in aqueous solutions: experimental and theoretical studies

Four heterocycles containing hydroxy and keto functionalities have been tested as chelating agents of beryllium(II). These are in the order (i) 3-hydroxy-2-methyl-4H-pyran-4-one (maltol, Hma), (ii) 5-hydroxy-2-(hydroxymethyl)-4H-pyran-4-one (kojic acid, Hka), (iii) 3-hydroxy-1,2-dimethyl-4-pyridinone (Hdpp), (iv) 1-(3-hydroxy-2-furanyl)ethanone (isomaltol, Hima). Although the skeletons of the first three species, with one nitrogen or oxygen heteroatom at the six-membered ring, are almost superimposable, straightforward synthesis and crystallization is achieved only for the 1:2 adduct Be(dpp)(2), 1. Also the complex Be(ima)(2), 2, precipitates in high yield but the ima(-) ligand has a different skeletal structure. X-ray determinations of 1 and 2 showed that the Be(2+) ion is pseudotetrahedrally coordinated by two chelating ligands with slightly asymmetric Be-O(alkoxo) and Be-O(keto) bonds. The complex Be(ma)(2) precipitates in low yields together with large amounts of unreacted Hma while, under the same conditions, no trace of the analogous species Be(ka)(2) has been observed. This paper presents the results of potentiometric and NMR studies in the aqueous solutions as well as of DFT structural optimizations for all of the free acids, their associated bases, and the adducts of the type [BeL(H(2)O)(2)](+) and BeL(2) in the gas phase. It is consistently found that the basicity of the ligands and the stability of their complexes decrease in the order dpp(-) > ma(-) > ka(-) > ima(-). In solution, all of the anionic ligands form adducts of the type [BeL(H(2)O)(2)](+) at low pH values, whereas higher concentrations of the free anion are required to form 1:2 adducts. The pH, the basicity, and the stability constants of the complexes as well as the formation of competing beryllium hydroxide species are strictly correlated factors for the obtainment of the latter type of adduct. The DFT calculations account nicely for the different donor powers of the various chelates in terms of electronic redistribution and associated energetics.     

Evolution of nickel speciation during preparation of Ni-SiO(2) catalysts: effect of the number of chelating ligands in [Ni(en)x(H2O)6-2x]2+ precursor complexes

The evolution of nickel speciation during the successive preparation steps of Ni-SiO(2) catalysts is studied by UV-Vis-NIR, FT-IR, DTG, TPR and TEM. The study focuses on the effect of the number of chelating ligands in the precursor complexes [Ni(en)(x)(H(2)O)((6-2x))](2+) (en = ethylenediamine, x = 1, 2, 3) on the adsorption on silica, and on nickel speciation after thermal treatment. When the en:Ni ratio in solution increases from 1 to 3, the most abundant complex is [Ni(en)(H(2)O)(4)](2+) (64% of all Ni complexes), [Ni(en)(2)(H(2)O)(2)](2+) (81%) and [Ni(en)(3)](2+) (61%), respectively. Equilibrium adsorption of [Ni(en)(x)(H(2)O)((6-2x))](2+) on SiO(2) results in the selective grafting of [Ni(en)(H(2)O)(4)](2+) and [Ni(en)(2)(H(2)O)(2)](2+), through the substitution of two labile H(2)O ligands by two surface SiO(-) groups. The surface [Ni(en)(H(2)O)(2)(SiO)(2)] complex formed by the grafting of [Ni(en)(H(2)O)(4)](2+) onto silica tends to transform into NiO and nickel phyllosilicate after calcination, which consequently leads to large and heterogeneously distributed metallic Ni particles upon reduction. In contrast, [Ni(en)(2)(SiO)(2)], resulting from the grafting of [Ni(en)(2)(H(2)O)(2)](2+) onto silica, no longer has aqua ligands able to react with other nickel complexes or silicium-containing species. Calcination transforms these complexes into isolated Ni(2+) ions, which are reduced into small metallic Ni particles with a more homogeneous size distribution, even at higher Ni loading.     

Equilibria occurring between beryllium (II) and salicylate ions

The complexation equilibria between Be2+ and the hydrogen salicylate (HL-) ions have been studied, at 25 degrees C, by potentiometric measurements with a glass electrode in 3 M NaClO4. The concentrations of metal (CM) and ligand (CL) were varied between 10(-3) and 0.03 M and 2 x 10(-3) and 0.03 M, respectively, while 1 < or = CL/CM < or = 3. The hydrogen ion concentration ranged from 10(-3) to 10(-5.3) M when basic salts start to precipitate. The equilibria can be written in the general form as: pBe2+ + rHL- <==> Be(p)H(-q) (HL)r(2p-r-q) + qH+, log beta(pqr). The experimental data have been explained with the formation of BeHL+ (log beta101 = 1.46 +/- 0.05), BeL (log beta111 = -0.897 +/- 0.018), BeL2(2-) (log beta122 = -3.746 +/- 0.021), Be2(OH)L2- (log beta232 = -5.23 +/- 0.09), Be3(OH)3L3(3-) (log beta363 = -14.39 +/- 0.12). The uncertainties represent 3sigma. The predominant complex in the whole concentration range studied is the uncharged mononuclear species BeL.     

Systematic investigations on magneto-structural correlations of copper(II) coordination polymers based on organic ligands with mixed carboxylic and nitrogen-based moieties

Reaction of copper(II) tetrazolate-5-carboxylate with different neutral N-donor spacer ligands under hydrothermal conditions leads to the formation of five new coordination polymers, [Cu(tzc)(pyz)(0.5)(H(2)O)(2)](n)·H(2)O (1), [Cu(tzc)(pyz)](n) (2), [Cu(tzc)(pym)(H(2)O)](n) (3), [Cu(tzc)(dpe)(0.5)(H(2)O)](n) (4) and [Cu(tzc)(azpy)(0.5)(H(2)O)](n) (5) (tzc = tetrazolate-5-carboxylate, pyz = pyrazine, pym = pyrimidine, dpe = 1,2-di(4-pyridyl)ethylene and azpy = 4,4'-azopyridine). All five structures were characterized by X-ray single-crystal measurements and bulk material can be prepared phase pure in high yields. The crystal structures of the hydrates 1, 3, 4 and 5 show dimeric [Cu(2)(N(tzc)-N(tzc))(2)] building units formed by μ(2)-N1,O1:N2 bridging tzc ligands as the characteristic structural motif. These six-membered entities in 1, 4 and 5 are connected by μ(2)-N,N' bridging N-donor ligands into 1D chains and in 3 into 2D layers. In the crystal structure of compound 2 adjacent Cu(II) cations are connected by μ(2)-N1,O1:N4,O2 bridging tzc ligands into chains, which are further connected by μ(2)-N,N' bridging pyz ligands forming 2D layers. Extensive hydrogen bonds in all compounds play an important role in the construction of their supramolecular networks. Investigations of their thermal properties reveal water release upon heating according to the formation of anhydrates before starting decomposing above 220 °C. Furthermore, the magnetic properties have been studied leading to consistent global antiferromagnetic exchange interactions with coupling constants of J = 3 ± 1 cm(-1) and long-range antiferromagnetic ordering states at lower temperatures.     

Synthesis of tris- and tetrakis(pyrazol-1-yl)borate gold(III) complexes. Crystal structures of [Au[kappa(2)-N,N'-BH(Pz)(3)]Cl(2)] (pz = pyrazol-1-yl) and [Au[kappa(2)-N,N'-B(Pz)(4)](kappa(2)-C,N-C(6)H(4)CH(2)NMe(2)-2)]ClO(4).CHCl(3)

Na[BH(pz)(3)] and Na[AuCl(4)].2H(2)O react in water (1:1) to give [Au[kappa(2)-N,N'-BH(pz)(3)]Cl(2)] (1) or, in the presence of NaClO(4) (2:1:1), the cationic complex [Au[kappa(2)-N,N'-BH(pz)(3)](2)]ClO(4) (2). The reactions of Na[B(pz)(4)] with the cyclometalated gold complexes [AuRCl(2)] and NaClO(4) (1:1:1) produce [Au[kappa(2)-N,N'-B(pz)(4)](R)]ClO(4) [R = kappa(2)-C,N-C(6)H(4)CH(2)NMe(2)-2 (3)] or [Au[kappa(2)-N,N'-B(pz)(4)](R)Cl] [R = C(6)H(3)(N=NC(6)H(4)Me-4')-2-Me-5 (4)], respectively, although 4 is better obtained in the absence of NaClO(4). The crystal structures of 1 and 3.CHCl(3) are reported. Both complexes display the gold center in square planar environments, two coordination sites being occupied by the chelating poly(pyrazolyl)borate ligands.     

Formation and stability of zinc(II) and cadmium(II) citrate complexes in aqueous solution at various temperatures

The citrate complexes of Zn(2+) and Cd(2+) have been investigated by pH titration at I = 0.1 M (KNO(3)) and 10, 25, 35 and 45 degrees . The species found were [Zn(cit)](-), [Zn(cit)H], [Zn(cit)(2)](4-) and [Zn(2)(cit)(2)H(-)(2)](4-), [Cd(cit)](-), [Cd(cit)H], [Cd(cit)(2)](4-) and [Cd(cit)H(-1)](2-). From the dependence of the formation constants on temperature, DeltaH degrees and DeltaS degrees values were calculated. Speciation in the Zn(2+)]- and Cd(2+)-citrate systems is discussed with particular attention to formation of polynuclear species. Some comparisons with literature data are made.     

Reactions of a gold(I) thiolate complex [Au(Tab)(2)](2)(PF(6))(2) (Tab = 4-(trimethylammonio)benzenethiolate) with diphosphine ligands

Reactions of a gold(i) thiolate complex [Au(Tab)(2)](2)(PF(6))(2) (Tab = 4-(trimethylammonio)benzenethiolate) with equimolar 1,2-bis(diphenylphosphine)ethane (dppe), 1,3-bis-(diphenylphosphine)propane (dppp) or 1,4-bis-(diphenylphosphine)butane (dppb) in MeOH-DMF-CH(2)Cl(2) gave rise to three polymeric complexes [Au(2)(Tab)(2)(dppe)](2)(PF(6))(4)·2MeOH (1·2MeOH), [Au(2)(Tab)(2)(dppp)]Cl(2)·0.5MeOH·4H(2)O (2·0.5MeOH·4H(2)O), and [Au(4)(μ-Tab)(2)(Tab)(2)(dppb)](PF(6))(4)·4DMF (3·4DMF), respectively. Analogous reaction of 1 with dppb in DMF/C(2)H(4)Cl(2) produced one tetranuclear complex [Au(2)(μ-Tab)(Tab)(2)](2)Cl(4)·2DMF·4H(2)O (4·2DMF·4H(2)O). Complexes 1-4 were characterized by elemental analysis, IR spectra, UV-vis spectra, (1)H and (31)P{(1)H} NMR and single crystal X-ray analysis. Compounds 1 and 2 consist of [Au(Tab)](2) dimeric fragments that are bridged by dppe or dppp ligands to form a 1D linear chain extending along the a axis. For 3, each [Au(4)(Tab)(2)(μ-Tab)(2)] fragment is linked by a pair of dppb ligands to afford another 1D chain extending along the c axis. For 4, the four [Au(Tab)](+) fragments are linked by two Au-Au bonds and two doubly bridging Tab ligands to form a {[Au(Tab)](4)(μ-Tab)(2)} chair-like cyclohexane structure. Hydrogen-bonding interactions in 2 and 4 lead to the formation of interesting 2D hydrogen-bonded networks. The luminescent properties of 1-4 in solid state were also investigated.     

Designer ligands for beryllium

We report the rational design of ligands that selectively bind beryllium. We selected two ligands to design Be based on binding polynulear species with a Be-O-Be motif: 2-hydroxyisophthalic acid (HIPA) and 2,3-dihydroxybenzoic acid (DHBA). All previous work has focused on BeL or BeL2 species. The HIPA and DHBA have extremely high binding constants of 17.5 and 18.4, respectively. These ligands outcompete chromotropic acid, which has one the highest binding constants for Be reported in the literature for a simple BeL species. The binding of the second Be to form the Be-O-Be motif is so strong that polynuclear species predominates in solution down to micromolar concentrations. Both ligands show a fluorescence response in the presence of beryllium, making them promising candidates for fluorescence-based sensors. In the case of HIPA, there is a fluorescence shift, and in the case of DHBA, the presence of beryllium turns on the fluorescence by removing two OH bonds that otherwise lead to nonradiative decay. The most dramatic result is that DHBA selectively binds Be in the presence of a metal cocktail containing a 50-fold excess of Al, Fe, Cr, Cu, Zn, Cd, and Pb. This is the first time that such selectivity for beryllium has been demonstrated.     

Interconversion and Reactivity of Two Heterometallic Tin-Containing Cuboidal Clusters from [Mo(3)S(4)(H(2)O)(9)](4+): X-ray Structure of the Single Cube with an Mo(3)SnS(4) Core

The Mo(3)SnS(4)(6+) single cube is obtained by direct addition of Sn(2+) to [Mo(3)S(4)(H(2)O)(9)](4+). UV-vis spectra of the product (0.13 mM) in 2.00 M HClO(4), Hpts, and HCl indicate a marked affinity of the Sn for Cl(-), with formation of the more strongly yellow [Mo(3)(SnCl(3))S(4)(H(2)O)(9)](3+) complex complete in as little as 0.050 M Cl(-). The X-ray crystal structure of (Me(2)NH(2))(6)[Mo(3)(SnCl(3))S(4)(NCS)(9)].0.5H(2)O has been determined and gives Mo-Mo (mean 2.730 ?) and Mo-Sn (mean 3.732 ?) distances, with a difference close to 1 ?. The red-purple double cube cation [Mo(6)SnS(8)(H(2)O)(18)](8+) is obtained by reacting Sn metal with [Mo(3)S(4)(H(2)O)(9)](4+). The double cube is also obtained in approximately 50% yield by BH(4)(-) reduction of a 1:1 mixture of [Mo(3)SnS(4)(H(2)O)(10)](6+) and [Mo(3)S(4)(H(2)O)(9)](4+). Conversely two-electron oxidation of [Mo(6)SnS(8)(H(2)O)(18)](8+) with [Co(dipic)(2)](-) or [Fe(H(2)O(6)](3+) gives the single cube [Mo(3)SnS(4)(H(2)O)(12)](6+) and [Mo(3)S(4)(H(2)O)(9)](4+) (up to 70% yield), followed by further two-electron oxidation to [Mo(3)S(4)(H(2)O)(9)](4+) and Sn(IV). The kinetics of the first stages have been studied using the stopped-flow method and give rate laws first order in [Mo(6)SnS(8)(H(2)O)(18)](8+) and the Co(III) or Fe(III) oxidant. The oxidation with [Co(dipic)(2)](-) has no [H(+)] dependence, [H(+)] = 0.50-2.00 M. With Fe(III) as oxidant, reaction steps involving [Fe(H(2)O)(6)](3+) and [Fe(H(2)O)(5)OH](2+) are implicated. At 25 degrees C and I = 2.00 M (Li(pts)) k(Co) is 14.9 M(-)(1) s(-)(1) and k(a) for the reaction of [Fe(H(2)O)(6)](3+) is 0.68 M(-)(1) s(-)(1) (both outer-sphere reactions). Reaction of Cu(2+) with the double but not the single cube is observed, yielding [Mo(3)CuS(4)(H(2)O)(10)](5+). A redox-controlled mechanism involving intermediate formation of Cu(+) and [Mo(3)S(4)(H(2)O)(9)](4+) accounts for the changes observed.     

Reactions of beryllium halides in liquid ammonia: the tetraammineberyllium cation [Be(NH3)4]2+, its hydrolysis products, and the action of Be2+ as a fluoride-ion acceptor

The first structural characterization of the text-book tetraammineberyllium(II) cation [Be(NH(3))(4)](2+), obtained in the compounds [Be(NH(3))(4)](2)Cl(4)?17NH(3) and [Be(NH(3))(4)]Cl(2), is reported. Through NMR spectroscopic and quantum chemical studies, its hydrolysis products in liquid ammonia were identified. These are the dinuclear [Be(2)(μ-OH)(NH(3))(6)](3+) and the cyclic [Be(2)(μ-OH)(2)(NH(3))(4)](2+) and [Be(3)(μ-OH)(3)(NH(3))(6)](3+) cations. The latter species was isolated as the compound [Be(3)(μ-OH)(3)(NH(3))(6)]Cl(3)?7NH(3). NMR analysis of solutions of BeF(2) in liquid ammonia showed that the [BeF(2)(NH(3))(2)] molecule was the only dissolved species. It acts as a strong fluoride-ion acceptor and forms the [BeF(3)(NH(3))](-) anion in the compound [N(2)H(7)][BeF(3)(NH(3))]. The compounds presented herein were characterized by single-crystal X-ray structure analysis, (9)Be, (17)O, and (19)F?NMR, IR, and Raman spectroscopy, deuteration studies, and quantum chemical calculations. The extension of beryllium chemistry to the ammine system shows similarities but also decisive differences to the aquo system.     

Assembly of tetra, di and mononuclear molecular cadmium phosphonates using 2,4,6-triisopropylphenylphosponic acid and ancillary ligands

The reaction of ArPO(3)H(2) (Ar = 2,4,6-iPr(3)-C(6)H(2)) with Cd(CH(3)COO)(2).2H(2)O using various co-ligands such as methanol, dimethylformamide (DMF) and 3,5-dimethylpyrazole (DMPZH) resulted in the formation of tetranuclear assemblies [Cd(4)(ArPO(3))(2)(ArPO(3)H)(4)(CH(3)OH)(4)].3(CH(3)OH) (1), [Cd(4)(ArPO(3))(2)(ArPO(3)H)(4)(DMF)(4)].3(DMF) (2) and [Cd(4)(ArPO(3))(2)(ArPO(3)H)(4)(DMF)(2)(DMPZH)(2)].2(DMF).2(H(2)O) (3). In all of these compounds the tetranuclear cadmium array, containing two five-coordinate and two six-coordinate cadmium atoms, is held together by two mu(4) capping [ArPO(3)](2-) and four anisobidentate mu(2) [ArPO(2)(OH)](-) ligands. Each cadmium atom is bound to an additional ancillary ligand. The reaction of ArPO(3)H(2) with Cd(CH(3)COO)(2).2H(2)O in the presence of the chelating ligand 2,2'-bipyridine (bipy) leads to the exclusive formation of the dinuclear assembly [Cd(2)(ArPO(3)H)(4)(bipy)(2)].(CH(3)OH)(H(2)O) (4). The latter contains an eight-membered Cd(2)P(2)O(4) inorganic ring formed as a result of the bridging coordination action of two anisobidentate mu(2) [ArPO(2)(OH)](-) ligands. Each cadmium atom is bound by one chelating bipy and one monodentate [ArPO(2)(OH)](-) ligands. Use of four equivalents of 3,5-dimethylpyrazole leads to the formation of the mononuclear derivative [Cd(ArPO(3)H)(2)(DMPZH)(4)] (5). The molecular structure of the latter comprises of a central cadmium atom surrounded by six monodentate ligands. Four of these are neutral pyrazole ligands that occupy the equatorial plane; the remaining two are anionic phosphinate ligands which are present trans to each other. The thermal analysis of 1 and 4 reveals that the char residue obtained at 600 degrees C consists predominantly of Cd(2)P(2)O(7).     

Syntheses, solid-state structures, and solution studies by VT 31P NMR of [Zn[Se2P(OEt)2]2] infinity and [Zn2[Se2P(OiPr)2]4

Complexes [Zn[Se(2)P(OEt)(2)](2)]( infinity ) (1) and [Zn(2)[Se(2)P(O(i)Pr)(2)](4)] (2) are prepared from the reaction of Zn(ClO(4))(2).6H(2)O and (NH(4))[Se(2)P(OR)(2)] (R = Et and (i)Pr) in a molar ratio of 1:2 in deoxygenated water at room temperature. Positive FAB mass spectra show m/z peaks at 968.8 (Zn(2)L(3)(+)) and 344.8 (ZnL(+)) for 1 and m/z at 1052.8 (Zn(2)L(3)(+)) for 2. (1)H NMR spectra exhibit chemical shifts at delta 1.43 and 4.23 ppm for 1 and 1.41 and 4.87 ppm for 2 due to Et and (i)Pr group of dsep ligands. While the solid-state structure of compound 1 is a one-dimensional polymer via symmetrically bridging dsep ligands, complex 2 in the crystalline state exists as a dimer. In both 1 and 2, zinc atoms are connected by two bridging dsep ligands with an additional chelating ligand at each zinc atom. The dsep ligands exhibit bimetallic biconnective (micro(2), eta(2)) and monometallic biconnective (eta(2)) coordination patterns. Thus, each zinc atom is coordinated by four selenium atoms from two bridging and one chelating dsep ligands and the geometry around zinc is distorted tetrahedral. The Zn-Se distances range between 2.422 and 2.524 A. From variable-temperature (31)P NMR studies it has been found that monomer and dimer of the complex are in equilibrium in solution via exchange of bridging and chelating ligands. However, at temperature above 40 degrees C the complex exists as a monomer and shows a very sharp peak while with lowering of the temperature the percentage of dimer increases gradually at the expense of monomer. Below -90 degrees C the complex exists as a dimer and two peaks are observed with equal intensities which are due to bridging and chelating ligands. (77)Se NMR spectra of both complexes at -30 degrees C exhibit three doublets due to the presence of monomer and dimer in solution.     

Monodithiolene molybdenum(V, VI) complexes: a structural analogue of the oxidized active site of the sulfite oxidase enzyme family

The active sites of the xanthine oxidase and sulfite oxidase enzyme families contain one pterin-dithiolene cofactor ligand bound to a molybdenum atom. Consequently, monodithiolene molybdenum complexes have been sought by exploratory synthesis for structural and reactivity studies. Reaction of [MoO(S(2)C(2)Me(2))(2)](1-) or [MoO(bdt)(2)](1-) with PhSeCl results in removal of one dithiolate ligand and formation of [MoOCl(2)(S(2)C(2)Me(2))](1-) (1) or [MoOCl(2)(bdt)](1-) (2), which undergoes ligand substitution reactions to form other monodithiolene complexes [MoO(2-AdS)(2)(S(2)C(2)Me(2))](1-) (3), [MoO(SR)(2)(bdt)](1-) (R = 2-Ad (4), 2,4,6-Pr(i)(3)C(6)H(2) (5)), and [MoOCl(SC(6)H(2)-2,4,6-Pr(i)(3))(bdt)](1-) (6) (Ad = 2-adamantyl, bdt = benzene-1,2-dithiolate). These complexes have square pyramidal structures with apical oxo ligands, exhibit rhombic EPR spectra, and 3-5 are electrochemically reducible to Mo(IV)O species. Complexes 1-6 constitute the first examples of five-coordinate monodithiolene Mo(V)O complexes; 6 approaches the proposed structure of the high-pH form of sulfite oxidase. Treatment of [MoO(2)(OSiPh(3))(2)] with Li(2)(bdt) in THF affords [MoO(2)(OSiPh(3))(bdt)](1-) (8). Reaction of 8 with 2,4,6-Pr(i)(3)C(6)H(2)SH in acetonitrile gives [MoO(2)(SC(6)H(2)-2,4,6-Pr(i)(3))(bdt)](1-) (9, 55%). Complexes 8 and 9 are square pyramidal with apical and basal oxo ligands. With one dithiolene and one thiolate ligand of a square pyramidal Mo(VI)O(2)S(3) coordination unit, 9 closely resembles the oxidized sites in sulfite oxidase and assimilatory nitrate reductase as deduced from crystallography (sulfite oxidase) and Mo EXAFS. The complex is the first structural analogue of the active sites in fully oxidized members of the sulfite oxidase family. This work provides a starting point for the development of both structural and reactivity analogues of members of this family.     

Syntheses, structures, and properties of intercalation compounds of silver(I) complex with [2.2]paracyclophane

Reaction of [2.2]paracyclophane (pcp) with silver(I) trifluoroacetate (AgCF(3)CO(2)) and silver(I) pentafluoroproprionate (AgC(2)F(5)CO(2)) has led to isolation of three novel intercalation polymers: [Ag(4)(pcp)(CF(3)CO(2))(4)](C(6)H(6)) (1), [Ag(4)(pcp)(CF(3)CO(2))(4)](C(6)H(3)Me(3)) (2), and [Ag(4)(pcp)(C(2)F(5)CO(2))(4)](pcp) (3). Structure studies using single crystal X-ray diffraction have shown that all compounds contain two-dimensional layered frameworks based on cation-pi interactions, in which pcp exhibits an unprecedented micro-tetra-eta(2) coordination mode. Guest molecules which weakly interact with the host pcp via C-H.pi interactions are intercalated between layers. The guest-eliminated complexes (1a and 2a) and guest-reincorporated ones (1b or 1c and 2b or 2c), accompanied by small structural changes, were confirmed by (1)H NMR, thermogravimetric analysis, mass spectra, and X-ray powder diffraction patterns. The structural changes from 1 --> 1a --> 1c (=1) can take place reversibly in the process of exposure of 1a to benzene vapor. The original framework of complex 2 is also completely recovered by immersing 2a in mesitylene as well as exposing it to mesitylene vapor.     

Substitution reactions of [Pt(terpy)X]2+ with some biologically relevant ligands. Synthesis and crystal structure of [Pt(terpy)(cyst-S)](ClO4)2.0.5H2O and [Pt(terpy)(guo-N7)](ClO4)2.0.5guo.1.5H2O

Substitution reactions of the complexes [Pt(terpy)(H(2)O)](2+), [Pt(terpy)(cyst-S)](2+) and [Pt(terpy)(guo-N(7))](2+), where terpy = 2,2':6',2"-terpyridine, cyst = L-cysteine and guo = guanosine, with some biologically relevant ligands such as inosine (INO), inosine-5'-monophosphate (5'-IMP), guanosine-5'-monophosphate (5'-GMP), l-cysteine, glutathione, thiourea, thiosulfate and diethyldithiocarbamate (DEDTC), were studied in aqueous 0.10 M NaClO(4) at pH 2.5 and 6.0 using variable-temperature and -pressure stopped-flow spectrophotometry. The reactions of [Pt(terpy)(H(2)O)](2+) with INO, 5'-IMP and 5'-GMP showed that these ligands are very good nucleophiles. The second order rate constants varied between 4 x 10(2) and 6 x 10(2) M(-1) s(-1) at 25 degree C. The [Pt(terpy)(cyst-S)](2+) complex is unreactive towards nitrogen donor nucleophiles, and cysteine cannot be replaced by N(7) from INO, 5'-IMP and 5'-GMP. However, sulfur donor nucleophiles such as thiourea, thiosulfate and diethyldithiocarbamate could displace the Pt-cysteine bond. Diethyldithiocarbamate is the best nucleophile and the order of reactivity is: thiourea < thiosulfate < DEDTC with rate constants of 0.936 +/- 0.002, 5.99 +/- 0.02 and 8.88 +/- 0.07 M(-1) s(-1) at 25 degree C, respectively. The reactions of [Pt(terpy)(guo-N(7))](2+) with sulfur donor ligands showed that these nucleophiles could substitute guanosine from the Pt(ii) complex, of which diethyldithiocarbamate and thiosulfate are the strongest nucleophiles. The tripeptide glutathione is also a very efficient nucleophile. Activation parameters (Delta H(++), Delta S(++) and Delta V(++)) were determined for all reactions. The crystal structures of [Pt(terpy)(cyst-S)](ClO(4))(2).0.5H(2)O and [Pt(terpy)(guo-N(7))](ClO(4))(2).0.5guo.1.5H(2)O were determined by X-ray diffraction. Crystals of [Pt(terpy)(cyst-S)](ClO(4))(2).0.5H(2)O are orthorhombic with the space group P2(1)2(1)2(1), whereas [Pt(terpy)(guo-N(7))](ClO(4))(2).0.5guo.1.5H(2)O crystallizes in the orthorhombic space group P2(1)2(1)2. A typical feature of terpyridine complexes can be found in both molecular structures: the Pt-N (central) bond distance, 1.982(7) and 1.92(2) A, respectively, is shorter than the other two Pt-N distances, being 2.043(7) and 2.034(7) A in [Pt(terpy)(cyst-S)](ClO(4))(2).0.5H(2)O and 2.03(2) and 2.04(2) A in [Pt(terpy)(guo-N(7))](ClO(4))(2).0.5guo.1.5H(2)O, respectively. In both crystal structures two symmetrically independent cations representing different conformers are present in the asymmetric unit. The results are analysed in reference to the antitumour activity of Pt(II) complexes, and the importance of the rescue agents are discussed.     

Complex formation of vanadium(IV) with 1,3,5-triamino-1,3,5-trideoxy-cis-inositol and related ligands

The complex formation of vanadium(IV) with 1,3,5-triamino-1,3,5-trideoxy-cis-inositol (taci) and 1,3,5-trideoxy-1,3,5-tris(dimethylamino)-cis-inositol (tdci) was studied in aqueous solution and in the solid state. The formation constants of [V(IV)O(taci)](2+), [V(IV)O(tdci)](2+), and [V(IV)(tdci)(2)](4+) and of the deprotonation product [V(IV)(tdci)(2)H(-)(1)](3+) were determined (25 degrees C, 0.1 M KNO(3)). Cyclic voltammetry measurements established a reversible one-electron transfer for the [V(IV)(tdci)(2)H(-)(m)]((4)(-)(m))/[V(III)(tdci)(2)H(-)(n)]((3)(-)(n)) couple (0 相似文献   

Six-coordinate and five-coordinate Fe(II)(CN)(2)(CO)(x) thiolate complexes (x = 1, 2): synthetic advances for iron sites of [NiFe] hydrogenases

The dicyanodicarbonyliron(II) thiolate complexes trans,cis-[(CN)(2)(CO)(2)Fe(S,S-C-R)](-) (R = OEt (2), N(Et)(2) (3)) were prepared by the reaction of [Na][S-C(S)-R] and [Fe(CN)(2)(CO)(3)(Br)](-) (1). Complex 1 was obtained from oxidative addition of cyanogen bromide to [Fe(CN)(CO)(4)](-). In a similar fashion, reaction of complex 1 with [Na][S,O-C(5)H(4)N], and [Na][S,N-C(5)H(4)] produced the six-coordinate trans,cis-[(CN)(2)(CO)(2)Fe(S,O-C(5)H(4)N)](-) (6) and trans,cis-[(CN)(2)(CO)(2)Fe(S,N-C(5)H(4))](-) (7) individually. Photolysis of tetrahydrofuran (THF) solution of complexes 2, 3, and 7 under CO led to formation of the coordinatively unsaturated iron(II) dicyanocarbonyl thiolate compounds [(CN)(2)(CO)Fe(S,S-C-R)](-) (R = OEt (4), N(Et)(2) (5)) and [(CN)(2)(CO)Fe(S,N-C(5)H(4))](-) (8), respectively. The IR v(CN) stretching frequencies and patterns of complexes 4, 5, and 8 have unambiguously identified two CN(-) ligands occupying cis positions. In addition, density functional theory calculations suggest that the architecture of five-coordinate complexes 4, 5, and 8 with a vacant site trans to the CO ligand and two CN(-) ligands occupying cis positions serves as a conformational preference. Complexes 2, 3, and 7 were reobtained when the THF solution of complexes 4, 5, and 8 were exposed to CO atmosphere at 25 degrees C individually. Obviously, CO ligand can be reversibly bound to the Fe(II) site in these model compounds. Isotopic shift experiments demonstrated the lability of carbonyl ligands of complexes 2, 3, 4, 5, 7, and 8. Complexes [(CN)(2)(CO)Fe(S,S-C-R)](-) and NiA/NiC states [NiFe] hydrogenases from D. gigas exhibit a similar one-band pattern in the v(CO) region and two-band pattern in the v(CN) region individually, but in different positions, which may be accounted for by the distinct electronic effects between [S,S-C-R](-) and cysteine ligands. Also, the facile formations of five-coordinate complexes 4, 5, and 8 imply that the strong sigma-donor, weak pi-acceptor CN(-) ligands play a key role in creating/stabilizing five-coordinate iron(II) [(CN)(2)(CO)Fe(S,S-C-R)](-) complexes with a vacant coordination site trans to the CO ligand.     

Dinuclear complexes of chiral tetradentate pyridylimine ligands: diastereoselectivity, positive cooperativity, anion selectivity, ligand self-sorting based on chirality, and magnetism

The synthesis and coordination chemistry of two chiral tetradentate pyridylimine Schiff base ligands are reported. The ligands were prepared by the nucleophilic displacement of both bromides of 1,3-bis(bromomethyl)benzene (2) or 3,5-bis(bromomethyl)toluene (3) by the anion of (S)-valinol, followed by capping of both amine groups with pyridine-2-carboxaldehyde. Both ligands react with CoCl(2) and NiCl(2) to give [M(2)L(2)Cl(2)](2+) complexes. Remarkably, neither fluoride nor bromide ions can act as bridging ligands. The formation of [Co(2)((S)-3)(2)Cl(2)](2+) is highly diastereoselective, and X-ray crystallography shows that both metal centers in the [Co(2)((S)-3)(2)Cl(2)](CoCl(4)) complex adopt the lambda configuration (crystal data: [Co(2)(C(31)H(40)N(4)O(2))(2)Cl(2)](CoCl(4)).(CH(3)CN)(3), monoclinic, P2(1), a = 11.595(2) A, b = 22.246(4) A, c = 15.350(2) A, V = 3705(1) A(3), beta = 110.643(3) degrees, Z = 2). Structurally, the dinuclear complex can be viewed as a helicate with the helical axis running perpendicular to the [Co(2)Cl(2)] plane. The reaction of racemic 2 with CoCl(2) was shown by (1)H NMR spectroscopy to yield a racemic mixture of Lambda,Lambda-[Co(2)((S)-2)(2)Cl(2)](2+) and delta,delta-[Co(2)((R)-2)(2)Cl(2)](2+) complexes; that is, a homochiral recognition process takes place. Spectrophotometric titrations were performed by titrating (S)-3 with Co(ClO(4))(2) followed by Bu(4)NCl, and the global stability constants of [Co((S)-3)](2+) (log beta(110) = 5.7), [Co((S)-3)(2)](2+) (log beta(120) = 11.6), and [Co(2)((S)-3)(2)Cl(2)](2+) (log beta(110) = 23.8) were calculated. The results revealed a strong positive cooperativity in the formation of [Co(2)((S)-3)(2)Cl(2)](2+). Variable-temperature magnetic susceptibility curves for [Co(2)((S)-2)(2)Cl(2)](BPh(4))(2) and [Co(2)((S)-3)(2)Cl(2)](BPh(4))(2) are very similar and indicate that there are no significant magnetic interactions between the cobalt(II) centers.     

Synthesis and physicochemical characterization of carbon backbone modified [Gd(TTDA)(H2O)]2- derivatives

The present study was designed to exploit optimum lipophilicity and high water-exchange rate (k(ex)) on low molecular weight Gd(III) complexes to generate high bound relaxivity (r(1)(b)), upon binding to the lipophilic site of human serum albumin (HSA). Two new carbon backbone modified TTDA (3,6,10-tri(carboxymethyl)-3,6,10-triazadodecanedioic acid) derivatives, CB-TTDA and Bz-CB-TTDA, were synthesized. The complexes [Gd(CB-TTDA)(H(2)O)](2-) and [Gd(Bz-CB-TTDA)(H(2)O)](2-) both display high stability constant (log K(GdL) = 20.28 and 20.09, respectively). Furthermore, CB-TTDA (log K(Gd/Zn) = 4.22) and Bz-CB-TTDA (log K(Gd/Zn) = 4.12) exhibit superior selectivity of Gd(III) against Zn(II) than those of TTDA (log K(Gd/Zn) = 2.93), EPTPA-bz-NO(2) (log K(Gd/Zn) = 3.19), and DTPA (log K(Gd/Zn) = 3.76). However, the stability constant values of [Gd(CB-TTDA)(H(2)O)](2-) and [Gd(Bz-CB-TTDA)(H(2)O)](2-) are lower than that of MS-325. The parameters that affect proton relaxivity have been determined in a combined variable temperature (17)O NMR and NMRD study. The water exchange rates are comparable for the two complexes, 232 × 10(6) s(-1) for [Gd(CB-TTDA)(H(2)O)](2-) and 271 × 10(6) s(-1) for [Gd(Bz-CB-TTDA)(H(2)O)](2-). They are higher than those of [Gd(TTDA)(H(2)O)](2-) (146 × 10(6) s(-1)), [Gd(DTPA)(H(2)O)](2-) (4.1 × 10(6) s(-1)), and MS-325 (6.1 × 10(6) s(-1)). Elevated stability and water exchange rate indicate that the presence of cyclobutyl on the carbon backbone imparts rigidity and steric constraint to [Gd(CB-TTDA)(H(2)O)](2-)and [Gd(Bz-CB-TTDA)(H(2)O)](2-). In addition, the major objective for selecting the cyclobutyl is to tune the lipophilicity of [Gd(Bz-CB-TTDA)(H(2)O)](2-). The binding affinity of [Gd(Bz-CB-TTDA)(H(2)O)](2-) to HSA was evaluated by ultrafiltration study across a membrane with a 30 kDa MW cutoff, and the first three stepwise binding constants were determined by fitting the data to a stoichiometric model. The binding association constants (K(A)) for [Gd(CB-TTDA)(H(2)O)](2-) and [Gd(Bz-CB-TTDA)(H(2)O)](2-) are 1.1 × 10(2) and 1.5 × 10(3), respectively. Although the K(A) value for [Gd(Bz-CB-TTDA)(H(2)O)](2-) is lower than that of MS-325 (K(A) = 3.0 × 10(4)), the r(1)(b) value, r(1)(b) = 66.7 mM(-1) s(-1) for [Gd(Bz-CB-TTDA)(H(2)O)](2-), is significantly higher than that of MS-325 (r(1)(b) = 47.0 mM(-1) s(-1)). As measured by the Zn(II) transmetalation process, the kinetic stabilities of [Gd(CB-TTDA)(H(2)O)](2-), [Gd(Bz-CB-TTDA)(H(2)O)](2-), and [Gd(DTPA)(H(2)O)](2-) are similar and are significantly higher than that of [Gd(DTPA-BMA)(H(2)O)](2-). High thermodynamic and kinetic stability and optimized lipophilicity of [Gd(CB-TTDA)(H(2)O)](2-) make it a favorable blood pool contrast agent for MRI.