The electronic properties of isocyanides at rhenium—dinitrogen binding sites. Preparation and redox properties of the isocyanide complexes trans-[ReCl(CNR)(Ph2PCH2CH2PPh2)2]

The isocyanide complexes trans-[ReCl(CNR)(dppe)₂] (R  Me, Bu^t, C₆H₄CH₃-4, C₆H₄CH₃-2, C₆H₄Cl-4, C₆H₄OCH₃-4 and C₆H₃Cl₂-2,6; dppe  Ph₂PCH₂CH₂PPh₂) have been prepared by isocyanide displacement of dinitrogen from the parent complex trans-[ReCl(N₂)(ddpe)₂]. Their redox properties have been studied by cyclic voltammetry and are interpreted on the basis of the electronic properties and the geometry of the ligating isocyanides which are believed to be bent in these complexes, appearing to exhibit ligand parameter (P_L) values ca. +0.3 V higher than those which would be expected for linear geometry. A very high polarisability (B ? 3.4) is observed for the {ReCl(dppe)₂} site.     

Disubstituted vinylidene complexes of iron and ruthenium: nucleophilic properties of ν1-acetylide ligands

The η¹-acetylide complexes (C₅H₅)ML₂(CCR) (M  Fe, Ru; L  PPh₃, L₂  Ph₂PCH₂CH₂PPh₂) are nucleophilic at the β-carbon and react with a variety of mild electrophiles to yield the corresponding disubstituted vinylidene complexes [(C₅H₅)ML₂ (CCR′) PF₆.     

Metallorganische verbindungen des 1,2-diethinylbenzols vom typ o-C6H4(CCMR3)2 (M = Si,Ge, Pb)

The preparation of the compounds o-C₆H₄(CCMR₃)₂ (M = Si, Ge, Pb; R = CH₃; M = Pb; R = C₆H₅) is described. Their properties are compared with those of o-C₆H₄(CCSnR₃)₂ (R = CH₃, C₆H₅) and those of their p-isomers. The structures and bonding conditions proposed for these molecules are supported by dipole measurements, mass spectroscopy, IR, Raman, ¹H NMR and ¹³C NMR data.     

Triorganotin aryl selenides

The SnSe bond in trimethyltin aryl selenides is cleaved on reaction with selenenyl halides, sulphenyl halides, alkyl halides and allyl halides. Thus Me₃SnSePh reacts with PhSeCl, 4-Me-2-NO₂C₆H₃SCl, RI (R = CH₃ or Ph₃SnCH₂) and CH₂CHCH₂Br to give PhSeSePh, 4-Me-2-NO₂C₆H₃SSePh, RSePh and CH₂CHCH₂SePh, respectively. The diselenide, PhSeSePh, is also obtained from Me₃SnSePh on reaction with either 4-MeC₆H₄SO₂Cl or NaIO₄. Exchange reactions also occur between Me₃SnSePh and Ph₃SnCl or PhHgCl.     

Sulphur substituted organometallic compounds III. Reactions of Ph3SnCH2CH2SC6H4Me-p with some electrophilic reagents

Two distinct types of reactions of electrophiles, EN, with Ph₃SnCH₂CH₂SC₆H₄Me-p (I) have been established. Thus I₂ and HgCl₂ cleave the phenyltin bond: I + EN → Ph₂(N)SnCH₂CH₂SC₆H₄Me-p + PhE (E  I, N  I; E  HgCl, N  Cl) while from the reactions of Br₂ and MeI, as well as of ArSCl, as previously reported, ethylene is evolved: I + EN → Ph₃SnN + CH₂CH₂ + ESC₆H₄Me-p (E  Br, N  Br; E  Me, N  I)     

Fulvene—platinum complexes: x-ray crystal structure of [Pt(η2-C5H4CPh2)(PPh3)2]

Bis(cycloocta-1,5-diene)platinum reacts with 2,3,4,5-tetraphenylfulvene to afford the complex [Pt(η²-CH₂C₅Ph₄)(cod)] (cod  C₈H₁₂) in which the metal atom is coordinated to the exo-cyclic double bond of the fulvene. Related compounds [Pt(η²-CH₂C₅Ph₄L₂] (L  PPh₃, PMePh₂, PMe₂Ph, AsPh₃ or CNBu^t have also been prepared and characterised. Reaction of the complexes [Pt(C₂H₄)₂(L)] (L  P(cyclo-C₆H₁₁)₃, PPh₃ or AsPh₃) with 2,3,4,5-tetraphenylfulvene yields the compounds [Pt(C₂H₄)(η²-CH₂C₅PH₄)(L)]. NMR data for the new species are reported and discussed. 6,6-Diphenylfulvene reacts with [Pt(cod)₂] and PPh₃ ($\text{1}\text{2}$ mol ratio) to give the complex [Pt(η²-C₅H₄CPh₂)-(PPh₃)₂] in which the metal atom is bonded to carbon atoms C(2) and C(3) of the fulvene ring. This was established by an X-ray diffraction study. Crystals are monoclinic, space group P2₁/n, with Z  4 in a unit cell of dimensions a  13.761(4), b  21.653(13), c  17.395(6) Å, β,  104.46(2)°. The structure has been solved and refined to R  0.064 (R′  0.064) for 3139 independent diffracted intensifies measured at room temperature. The platinum atom is in a trigonal environment formed by the two ligated phosphorus atoms and the CC bond of the fulvene which is elongated to 1.52(3) Å. The c₅ fulvene ring is planar, and makes an angle of 108° with the coordination plane around the platinum. In this plane the metal atom is slightly asymmetrically bonded with PtC 2.15(2) and 2.24(2) Å, and PtP 2.280(6) and 2.301(6) Å.     

Preparation,reactions and catalytic activity of complexes of the type [Ir(COD){P(p-RC6H4)3}2]A (R  Cl,F, H,CH3 OR CH3O; A  ClO4− OR B(C6H5)4−)

Complexes of the type [Ir(COD){P(p-RC₆H₄)₃}₂]A (R  Cl, F, H, CH₃ or CH₃O; A  ClO₄^? or B(C₆H₅)₄^?) have been prepared and their reactions with halogens, methyl iodide, chlorotrimethylsilane, carbon monoxide and hydrogen have been studied. The catalytic activity of the complexes in the hydrogenation of mono- and diolefins depends upon the basicity of the phosphine present.     

Dinuclear formamidino and triazenido compounds [{2,6-(Me2NCH2)2C6H3} (p-tolylNYNR)PtHgBrCl] (Y  CH,N) containing a platinum-to-mercury donor bond

Complexes [{2,6-(Me₂NCH₂)₂C₆H₃} (p-tolylNYNR)PtHgBrCl] (Y  CH, N; R  Me, Et, i-Pr) have been prepared by the reaction of [{2,6-(Me₂NCH₂)₂C₆H₃}-PtBr] with [Hg(p-tolylNYNR)Cl]. Similar complexes were obtained, although in lower yields, from exchange reactions of [{2,6-(Me₂NCH₂)₂C₆H₃} (RCO₂)-PtHg(O₂CR)Br] with p-tolylNNN(H)-p-tolyl and p-tolylNC(H)N(H)Et.The proposed structure for these heterodinuclear compounds involves a Pt-to-Hg donor bond which is bridged by a triazenido (Y  N) or a formamidino (Y  CH) group, the five-membered ring thus formed acting as a stabilizing factor. The absence of a subsequent electron transfer reaction is ascribed to the constraints of the terdentate 2,6-(Me₂NCH₂)₂C₆H₃ ligand, which fixes the N-donor atoms in mutual trans-positions.The use of p-tolylNYNR, where R is an alkyl group, results in the formation of two isomers of [{2,6-(Me₂NCH₂)₂C₆H₃} (p-tolylNYNR)PtHgBrCl] with p-tolyl-N and alkyl-N sites bonded either to Pt or Hg. The relative abundance of these isomers varies systematically with the nature of the group R. It is suggested that the ratio is determined during the formation of the complexes and that both steric and electronic factors are important.     

Aspects of transmetallation reactions of 2-Me2NCH2C6H4- and 2,6-(Me2NCH2)C6H3-Metal (Pd,Pt, Hg,Tl) complexes with metal carboxylates and low-valent metal (Pd,Pt) complexes

A study has been made of reactions involving organometallic compounds containing ortho-Me₂NCH₂ substituted aryl ligands. The single step syntheses of the new compounds [(2-Me₂NCH₂C₆H₄)₂TlCl], [ [{(S)-2-Me₂NCH(Me)C₆H₄}₂TlCl], [{(S)-2-Me₂NCH(Me)C₆H₄}TlCl₂], [{2,6-(Me₂NCH₂)₂C₆H₃}TlClBr] and [{2,6-(Me₂NCH₂)₂C₆H₃}HgCl] are described. Stable internal NTl coordination at low temperatures has been established for the C-chiral thallium compounds. Reactions of the other Tl and Hg compounds and of [(2-Me₂NCH₂C₆H₄)₂Hg] with Pd(O₂CMe)₂, and also of the reverse reaction of cis-[(2-Me₂NCH₂C₆H₄)₂Pd] with Hg(O₂CR)₂ or Tl(O₂CR)₃, gave transmetallation of one organo ligand and led to a single mono-organopalladium compound and corresponding by-products. Reaction of cis-[(₂-Me₂NCH₂C₆H₄)₂Pd] with Pd(O₂CR)₂ gave the dimeric compound [{(2-Me₂NCH₂C₆H₄)Pd(O₂CR)}₂]. cis-[(2-Me₂NCH₂C₆H₄)₂Pt] did not react with Pd(O₂CMe)₂, while reaction of trans-[(2-Me₂NCH₂C₆H₄)₂Pt] or cis-[(2-Me₂NC₆H₄CH₂)₂Pt] with Pd(O₂CMe)₂ resulted in decomposition. Upon heating, trans-[(2-Me₂NCH₂C₆H₄)₂Pt] was isomerized to cis-isomer. A redox reaction between [(2-Me₂NCH₂C₆H₄)₂Hg] and [Pt(COD)₂] (COD  1,5-cyclo-octadiene) and [Pd₂(DBA)₃] (DBA  dibenzylideneacetone) gave the cis-isomers of [(2-Me₂NCH₂C₆H₄)₂M] (M  Pd, Pt).The results are discussed in terms of influence of internal coordination of the CH₂NMe₂ group. It is concluded that although internal coordination of the CH₂NMe₂ ligand can stabilize metal—carbon bonds it cannot prevent cleavage of such bonds by electrophiles. In this respect, there is no difference in the behaviour of Hg(O₂CR)₂ and Tl(O₂CR)₃. The reactions are influenced by the metal—nitrogen bond strength, which follows the order PtN > PdN > HgN, TlN. The reactivity of Pt compounds is greatly influenced by their structure and type of ligand. It is proposed that cleavege of PdC bonds occurs mainly by a mechanism involving direct electrophilic attack at the carbon centre.     

Group IB organometallic chemistry : XXXVII. Complex forming reactions of polynuclear arylcopper compounds: CalkP bond cleavage in 1,2-bis(diphenylphosphino)ethane (diphos) by (2-Me2NCH2C6H4)4Cu4 and crystal structure of [(C6H5)2PCu · diphos]2 · 2 C6H6

Molecular weight measurements and microwave titrations indicate that no interaction occurs between tetrameric 2-Me₂NCH₂C₆H₄Cu (Ar₄Cu₄) and the monodentate ligands PPh₃, CH₃CN or pyridine. However, the tetrameric structure Ar₄Cu₄ breaks down upon interaction (1/1 molar ratio ArCu/L) with the bidentate ligands (L) Diphos or cis-DPPEE to give the monomeric 1/1 complexes ArCu · L.Addition of Diphos to ArCu · Diphos or conducting the reaction of Ar₄Cu₄ with Diphos in a 1/2 ratio (ArCu/Diphos) gives rise to a C_alkP bond cleavage reaction resulting in the formation of dimeric (Ph₂PCu · Diphos)₂ · 2 C₆H₆, ArH and Ph₂PCHCH₂.The molecular structure of (Ph₂PCu · Diphos)₂ · 2 C₆H₆, has been determined by a single-crystal X-ray diffraction study. Crystals are monoclinic, space group P2₁/c and have Z  2 in a unit cell of dimensions a  12.997(6), b  12.669(7), c  22.839(9) Å and β  94.48(4)°. The structure was refined to R  0.048 for 3048 independent reflections. The four copper atoms in the dimer are held together by two Ph₂P bridges. The bonding in the dimer is discussed.     

Alkaline hydrolysis of diaryl ditellurides under phase transfer conditions; synthesis of alkyl aryl tellurides

The disproportionation reaction of diaryl ditellurides [(C₆H₅Te)₂, (p-CH₃C₆H₄Te)₂, (p-CH₃OC₆H₄Te)₂, (p-C₂H₅OC₄Te)₂, (2-naphthyl-Te)₂] with sodium hydroxide under phase transfer conditions at room temperature is described for the first time. The phase transfer catalyst used is 2HT-75, a trade name for a mixture of dialkyldimethylammonium chlorides. The intermediates aryl tellurolates react “in situ” with alkyl halides to give the corresponding alkyl aryl tellurides (ArTeR) in 52–72% yield. The following compounds were prepared: Ar  C₆H₅, R=CH₃(CH₂)₃CH₂, (CH₃)₂CHCH₂CH₂, (CH₃)₂CHCH₂, CH₃CHBrCH₂CH₂, CH₃(CH₂)₈CH₂, C₆H₅CH₂, ClCH₂, C₆H₅CH₂CH₂, CH₂CHCH₂, C₆H₅CHCHCH₂, C₆H₅SeCH₂, $\text{CH}{}_2\text{CH}{}_2\text{CH}{}_2\text{CHCHC}$H; Ar=p-CH₃C₆H₄, R = CH₃(CH₂)₂CH₂; Ar=p-CH₃OC₆H₄, R = CH₃(CH₂)₂CH₂; Ar = p-CH₂H₅OC₆H₄, R= CH₃(CH₂)₂CH₂; Ar = 2-naphthyl, R = CH₃(CH42)₂CH₂.     

Darstellung und chemie von Me2TlN(SiMe3)2 und Tl[N(SiMe3)2]3

The complexes [Rh(η³-C₃H₄R)(η⁵-C₅R′₅)L]⁺BF₄^- (R  1-Me, R′  H, Me; R  2-Me, R′  H) (L  C₅H₅N, Ph₃P, Ph₃As) have been prepared from Rh(η³-C₃H₄R)(η⁵-C₅R′₅)Cl and AGBF₄ in acetone, followed by reaction with the stoicheiometric quantity of L. The ¹H and ¹³C NMR spectra of the salts are reported and discussed.     

Conjugate additions of functionalized carbanions to the vinylidene groups of [M(CO)4{(Ph2P)2CCH2}] (M = W,Mo or Cr)

Treatment of complexes of the type [M(CO)₄{(Ph₂P)₂CCH₂}] (M = W, Mo or Cr) with functionalized lithium reagents, LiR, followed by hydrolysis gives complexes of the type [M(CO)₄{PH₂P)₂CHCH₂R}] in high yields; R = C₆H₄Me-4, C₆H₄OMe-2, C₆H₃(OMe)₂-2,6, C₆H₄OH-2, C₆H₄(COOH)-2, CH₂COPh or CH₂COMe. IR, and ³¹P and ¹H NMR data are given.     

Carbamoyl and alkoxycarbonyl complexes of palladium(II) and platinum(II)

Carbamoyl and alkoxycarbonyl complexes of palladium(II) and platinum(II) of the type M(pnp)(CONHR)Cl (pnp = 2,6-bis(diphenylphosphinomethyl)pyridine; M Pd, R  C₆H₅, p-CH₃C₆H₄, p-CH₃OC₆H₄, C₆H₁₁, t-Bu; M  Pt, R  C₆H₅), Pd(pnp)[CON(Pr)₂]Cl (Pr = propyl), M(pnp)(COOR)Cl (M  Pd, R  C₆H₅, CH₃; M  Pt, R  CH₃), Pd(pnp)(COOCH₃)₂ result from reaction of M(pnp)Cl₂ with carbon monoxide and amines or alkoxides at room temperature and atmospheric pressure.The carbamoyl complexes react with bases to give urethane or diphenylurea depending upon the experimental conditions.     

Reactions of alkynes with bis(triphenylphosphine)platinum-ethylene: A 31P-{1H} NMR study

Internally consistent assignments of the ³¹P-{¹H} NMR parameters of the complexes [Pt(RCCR′)(PPh₃)₂] are proposed, based on the premise that the magnitude of ¹J(PtP) depends mainly on the nature of the moiety CR trans to P. For a given R, ²J(PP) correlates with ¹J(PtP) for thebond trans to CR. The alkynes PhCCSnEt₃, PhCCSnPh₃, Me₃SiCCCl, Me₃SiCCBr, Et₃SiCCI and MeCCI undergo oxidative addition reactions with [Pt(C₂H₄)(PPh₃)₂]; the intermediate alkyne complex was detected for PhCCSnEt₃, Me₃SiCCCl and Me₃CCBr. The triyne Me(CC)₃Me forms platinum(0) complexes by coordination with the central or terminal CC bond and appears also to give a platinum(II) complex by oxidative addition.     

Significant electrostatic effects in π-facial stereoselection of nucleophilic addition reactions to β,γ-unsaturated carbonyl compounds

The Significance of electrostatic effects on the origin of π-facial stereoselectivity in nucleophilic additions to β,γ-unsaturated carbonyl systems was shown through theoretical studies (ab initio MO calculations of transition structures for NaH + HCOCH₂CCH) and experimental results (M(BH₄)_n reduction of PhCOCH(CH₃)R (M  Na, Zn, Cd; R  C₂H₅, CHCH₂, CCH)).     

Synthesis, structures and preliminary biological screening of bis(diphenyl)chlorotin complexes and adducts: Ph2ClSn-CH2-R-CH2-SnClPh2, R = p-C6H4, CH2CH2

The reaction between ClCH₂-R-CH₂Cl, R = p-C₆H₄, and [Ph₃Sn]⁻Li⁺ yields Ph₃Sn-CH₂-R-CH₂-SnPh₃ (1) in high yield. The related known compound R = CH₂CH₂ (1a) is synthesized by the reaction of the di-Grignard reagent BrMg(CH₂)₄MgBr with two equivalents of Ph₃SnCl. Cleavage of a single Sn-Ph group at each tin centre of both compounds using HCl/Et₂O yields the corresponding bis-chlorostannanes Ph₂ClSn-CH₂-R-CH₂-SnClPh₂, R = (CH₂)₄ (2) and R = C₆H₄ (3), respectively. Compounds 1, 2 and 3 are crystalline solid materials and their single crystal X-ray structures are reported. In the solid state both 2 and 3 form self-assembled ladder structures involving alternating intermolecular Cl-Sn?Cl and Cl?Sn-Cl bonded chains at both ends of the distannanes with 5-coordinate tin atoms. Recrystallization of 3 from CH₂Cl₂ in the presence of DMF yields the bis-DMF adduct (4) in which no self-assembled structures were noted. Evaluation of the chlorostannanes 2 and 3 against a suite of bacteria, Staphylococcus aureus, Escherichia coli and Photobacterium phosphoreum is reported and compared to the related mono-chlorostannanes Ph₂(CH₃)SnCl and Ph₂(PhCH₂)SnCl.     

A novel class of aryldiazene complexes: [(PPh3)2 (CO)IrCl(HNNC6H4R-p)(CCPh)] (BF4) (R = NO2, CN,COCH3)

In the reaction with phenylacetylene leading to [(PPh₃)₂(CO)IrCl (HNNC₆H₄R-p)(CCPh)] (BF₄) (R  NO₂, CN, COCH₃), the vacant coordination site in [(PPh₃)₂ (CO)IrCl(N₂C₆H₄ R-p)] (BF₄) plays a key role in the activation of the acetylenic CH bond. ca]To whom correspondence should be addressed.     

New orthopalladated complexes of phosphorus ylides: Crystal structure of [Pd{CH{P(C7H6)(p-tolyl)2}COCH3}Cl{P(p-tolyl)3}]

This work reports on the preparation of the complexes [PdCl₂(Y¹)₂], [PdCl₂(Y²)₂] (Y¹ = (p-tolyl)₃PCHCOCH₃ (1a); Y² = Ph₃PCHCO₂CH₂Ph (1b)), [Pd{CHP(C₇H₆)(p-tolyl)₂COCH₃}(μ-Cl)]₂ (2a), [Pd{CHP(C₆H₄)Ph₂CO₂CH₂Ph}(μ-Cl)]₂ (2b), [Pd{CH{P(C₇H₆)(p-tolyl)₂}COCH₃}Cl(L)] (L = PPh₃ (3a), P(p-tolyl)₃ (4a)) and [Pd{CH{P(C₆H₄)Ph₂}CO₂CH₂Ph}Cl(L)] (L = PPh₃ (3b), P(p-tolyl)₃ (4b)). Orthometallation and ylide C-coordination in complexes 2a–4b are demonstrated by an X-ray diffraction study of 4a.     

Acyl-platinum(II) and -palladium(II) complexes derived from 2-hydroxybenzaldehyde derivatives. X-ray structure of [Pt(OC6H4CO) (P(p-CH3C6H4)3)2]

Platinum(II) and palladium(II) complexes containing chelating acyl ligands have been synthesized from salicylaldehyde, 2-hydroxynaphthaldehyde and 2-hydroxy-3-methoxybenzaldehyde. The platinum(II) complexes [Pt(acyl)L₂], acyl  OC₆H₄CO, OC₁₀H₆CO, O(m-CH₃OC₆H₃CO), L  tertiary phosphine, 1/2 diphenylphosphinoethane, can be isolated with both monodentate and chelating diphosphines, whereas for palladium only the compounds with chelating phosphines are readily obtainable. The reactions of [Pt(OC₆H₄CO)L₂] with HCl afford trans-[PtCl(OHC₆H₄CO)L₂], L  monodentate tertiary phosphine and cis-[PtCl(OHC₆H₄CO)L₂], L2  1,2-bis-diphenylphosphinoethane, in which the metal—carbon bond remains intact. The structure of [Pt(OC₆H₄CO)-(P(p-CH₃C₆H₄)₃)₂] has been determined by X-ray diffraction methods and found to have the expected square planar structure. Some relevant bond lengths and angles are: PtP; 2.271(4) and 2.348(5) Å; PtC; 1.96(2) Å and PtO; 2.07(1) Å; PPtP  101°, CPtO  82°.