Synthese und reaktionen von element-IVB-substituierten stannacyclohexadienderivaten

Metallation of 1,1-dibutyl-1-stannacyclohexadiene-2,5 (I) with lithiumamides yield the lithium compound II, from which the trimethylsilyl-, germyl-, -stannyl- and the bromoethyl-substituted stannacyclohexadienes III, IV, V and VI are obtained. The bis(trimethylsilyl- and -germyl) substituted stannacyclohexadienes VIII and X have been synthesized starting from III and IV, respectively. Arsabenzene (XII) is formed in good yields by treating arsenic trichloride with III, IV and V. 4-Trimethylsilyl-1-arsabenzene (XIII), 4-trimethylgermyl1-arsabenzene (XIV) and 4-(2-chloroethyl)-1-arsabenzene (XV) can be prepared by treating VIII, X and VI respectively with arsenic trichloride, ¹H NMR, IR, UV and mass spectral data of the new compounds are described.     

Catalytic method for determination of micro amounts of gold in iron ores

Summary Gold in iron ores has been determined by means of its catalytic action on the oxidation of mercury(I) by cerium(IV). The calibration curve is linear over the range 3–30 ng/ml. Only iridium(IV), platinum(IV), palladium(II), ruthenium(III) and gallium(III) interfere seriously, though some interference is experienced from lead(II), iron(III), osmium(VIII) and indium(III).

---

Zusammenfassung Gold wurde in Eisenerzen auf Grund seiner katalytischen Wirkung auf die Oxydation von Quecksilber(II) durch Cer(IV) bestimmt. Die Eichkurve verläuft von 2 bis 30 ng/ml linear. Nur Iridium(IV), Platin(IV), Palladium(II), Ruthenium(III) und Gallium(III) stören ernstlich, während eine geringfügige Störung auch durch Blei(II), Eisen(III), Osmium(VIII) und Indium(III) beobachtet wurde.

     

Synthesis and characterization of novel Schiff bases containing pyrimidine unit

The work involves synthesis of novel Schiff base derivatives containing a pyrimidine unit starting with chalcones. 4-Aminoacetophenone was reacted with 4-nitrobenzaldehyde or 4-chlorobenzaldehyde in basic medium giving chalcones, [I]_a and [I]_b, respectively, by Claisen-Schemidt reaction. The chalcones [I]_a and [I]_b were reacted with urea in HCl medium giving oxopyrimidines, [II]_a and [II]_b. They were also reacted with thiourea in basic medium to give thioxopyrimidines, [III]_a and [III]_b. The novel mono and bis Schiff bases, [VIII]_na, [VIII]_nb, [IX]_na, [IX]_nb, [X]_na, [X]_nb, [XI]_na, and [XI]_nb were synthesized by the reaction of pyrimidine derivatives; oxopyrimdines, [II]_a and [II]_b and thioxopyrimidines, [III]_a and [III]_b with 4-(4′-n-alkoxybenzoloxy)benzaldehyde [VI] and polymethylene-α,ω-bis-4-oxybenzaldehydes [VII]_m, respectively, in dry benzene using drops of glacial acetic acid as a catalyst. The synthesized compounds were characterized by melting points, elemental analysis, FTIR, and ¹H NMR spectroscopy.     

Hydroaluminierung: Synthese,Struktur und Eigenschaften von 1‐Methyl‐cis‐1‐azonia‐5‐alabicyclo[3.3.0]octan und des Alan‐triallylamin‐Adduktes

Hydro‐Alumination: Synthesis, Structure, and Properties of 1‐Methyl‐ cis ‐1‐azonia‐5‐alabicyclo[3.3.0]octane and of the Alan‐triallylamine Adduct The alan‐N‐methyl‐diallylamine adduct ( I ) was obtained by the reaction of N,N‐diallyl‐methyl‐ammoniumchloride with LiAlH₄. Subsequently the reaction product was transformed by intramolecular hydro‐alumination reaction into bis(1‐methyl‐cis‐1‐azonia‐5‐alabicyclo[3.3.0]octane) ( II ). In contrast to I , the bis(alan‐triallylamine) adduct ( III ) does not undergo an analogous hydro‐alumination reaction. The compounds I , II and III were characterized by MS, IR, ¹H‐, ¹³C‐ and ²⁷Al‐NMR spectroscopy, and the X‐ray structures of II and III are reported and discussed.     

The reaction of malononitrile with thioglycolic acid. A novel procedure for the synthesis of thiazolone derivatives

Malononitrile (I) reacted with thioglycolic acid to yield the thiazolin-4-one derivatives II or III depending on the molar ratio of the reactants. Compound II reacted with benzaldehyde in refluxing pyridine to yield the arylidene derivative IV. On the other hand, the benzylidine bis derivative VIII was obtained when II was reacted with benzaldehyde in refluxing ethanol. The structure of IV was established via its synthesis from the reaction of benzylidenemalononitrile (VI) and thioglycolic acid in refluxing acetic acid. Similar to II, compound III condensed with benzaldehyde to yield the benzylidene derivative IX.     

Structure,thermal stability and decomposition of bis-allyl-zinc compounds

The structure, thermal stability and decomposition of solutions of diallylzinc (I), bis(2-methylallyl)zinc (II), bis(3-methylallyl)zinc (III) and bis(3,3-dimethylallyl)zinc (IV) in deuterated solvents, have been investigated by¹H NMR and by kinetic measurements at temperatures between ?125 and +180°C. At room temperature I, II, III and IV are dynamic systems and are best described as being rapidly equilibrating mixtures of all isomeric σ-allyl forms; the NMR spectra are averages weighted according to the relative concentrations of the respective forms. I displays a¹H NMR spectrum of a static σ-allyl system only below ?125°C and II only below ?115°C. At temperatures above 100°C the thermal decomposition of I–IV results in coupling of the allyl groups, decomposition via radicals being the major process. The coupled products exhibit CIDNP, in which the multiplet polarisations confirm a decomposition via randomly diffusing allyl radicals. In the allyl radicals CH₂CR¹CR²R³ an alternating spin density was proved experimentally. The thermal stability decreases in the order I > II > III > IV.     

Three zinc(II) and cadmium(II) complexes containing 4‐amino‐3,5‐bis(pyridin‐2‐yl)‐1,2,4‐triazole and polynitrile ligands: synthesis,molecular and supramolecular structures,and photoluminescence properties

Three photoluminescent complexes containing either Zn^II or Cd^II have been synthesized and their structures determined. Bis[4‐amino‐3,5‐bis(pyridin‐2‐yl)‐1,2,4‐triazole‐κ²N ¹,N ⁵]bis(dicyanamido‐κN ¹)zinc(II), [Zn(C₁₂H₁₀N₆)₂(C₂N₃)₂], (I), bis[4‐amino‐3,5‐bis(pyridin‐2‐yl)‐1,2,4‐triazole‐κ²N ¹,N ⁵]bis(dicyanamido‐κN ¹)cadmium(II), [Cd(C₁₂H₁₀N₆)₂(C₂N₃)₂], (II), and bis[4‐amino‐3,5‐bis(pyridin‐2‐yl)‐1,2,4‐triazole‐κ²N ¹,N ⁵]bis(tricyanomethanido‐κN ¹)cadmium(II), [Cd(C₁₂H₁₀N₆)₂(C₄N₃)₂], (III), all crystallize in the space group P , with the metal centres lying on centres of inversion, but neither analogues (I) and (II) nor Cd^II complexes (II) and (III) are isomorphous. A combination of N—H…N and C—H…N hydrogen bonds and π–π stacking interactions generates three‐dimensional framework structures in (I) and (II), and a sheet structure in (III). The photoluminescence spectra of (I)–(III) indicate that the energies of the π–π* transitions in the coordinated triazole ligand are modified by minor changes of the ligand geometry associated with coordination to the metal centres.     

Homolytic dissociation of the carbon-element σ bonds by Grignard reagents

The reaction of 2-ethyl-3-tetrahydrofuryl thiocyanate (I) and triphenylacetonitrile (VIII) with methylmagnesium iodide in ether was studied using GC/MS, PMR and¹³C NMR spectroscopy. The reaction of (I) with CH₃MgI gives the product of the homolysis of the C-S bond, namely, bis(2-ethyl-3-tetrahydrofuryl) disulfide (II), in 81% yield. This reaction is assumed to be general in nature since triphenylacetonitrile (VIII) is also homolytically cleaved by the action of CH₃MgI to give triphenylmethane.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 12, pp. 2886–2888, December, 1991.     

[(R)-2-Methyl-1,4,7-triazacyclononane] [1,1,1-tris(aminomethyl)ethane]-cobalt(III) and some Mono[(R)-2-methyl-1,4,7-triazacyclononane]-cobalt(III) Complexes

Summary [(R)-2-Methyl-1,4,7-triazacyclononane][1,1,1-tris(aminomethyl)ethane]cobalt(III) has been prepared and separated into two isomers which show weak Cotton effects in the¹A₁¹T₁ region (d-electron transition) compared with that of bis[(R)-2-methyl-1,4,7-triazacyclononane]cobalt(III). The effect is comparable to that of tetraammine[(R)-1,2-diamino propane]cobalt(III). The circular dichroism spectra of the mono complex change markedly upon addition of sodium sulphate. The chelate rings are more flexible in the mono than in the bis complex. Some other related mono[(R)-2-methyl 1,4,7-triazacyclononane]cobalt(III) and [(R)-2-methyl-1,4,7 triazacyclononane][1,1,1-tris(aminomethyl)ethaneI nickel (II) complexes have also been prepared and characterized.     

Untersuchung von Kobalt(II)-Komplexen mit N-Arylthioharnstoffen

The complexes of cobalt(II) chloride with o, m, p-tolyl thiourea (I–III); m, p-nitrophenyl thiourea (IV, V); o, m, p-hydroxy phenyl thiourea (VI–VIII); m, p-bromophenyl thiourea (IX, X); p-iodophenyl thiourea (XI) and o-bromo-p-methyl phenyl thiourea (XII) have been synthesised. The elemental analysis reveals that ligands (I–V) form bis and the rest forms tris complexes with cobalt(II). Infrared and farinfrared spectral measurements prove that sulphur is taking part in co-ordination. All complexes are nonelectrolytes in acetone as revealed by conductivity measurements. The data obtained from magnetic susceptibility measurements, electronic spectra in solution are consistant with a practically tetrahedral symmetry.     

Thermal and photochemical oxidation of 2,6-dimethylphenyl phenyl ether: A model for poly(2,6-dimethyl-1,4-phenylene oxide)

The oxygenation of 2,6-dimethylphenyl phenyl ether (I) at 260°C has resulted in the formation of 4-methylxanthone (II), 2-hydroxy-3-methylbenzophenone(III), 2-phenoxy-3-methylbenzaldehyde (IV), 2-phenoxy-3-methylbenzoic acid (V), 2-phenoxy-3-methylbenzyl o-cresotinate (VI), 2-phenoxy-3-methylbenzyl alcohol (VII), and 2-phenoxy-3-methylbenzyl 2-phenoxy-3-methylbenzoate (VIII), The photochemical oxidation at 75° produced compounds II, III, IV, VII, and VIII. Oxidation of poly(2,6-dimethyl 1,4-phenylene oxide) film at 200°C and photochemically at 50°C produced a carbonyl band at ca. 1730 cm^?1. The gel content of the photochemically aged film could be significantly reduced and the 1730 cm^?1 peak in the thermally aged specimen could be moved to longer wavelength by base treatment. The isolation of compound VIII in both processes with the model compound and the results with the polymer allows us to propose an ester group as a crosslinking unit in thermally and photochemically aged polymer film.     

Bis(diphenylphosphino)amid-komplexe des platins,palladiums und nickels. Kristallstruktur des N-methylierungsprodukts {CH3N[(C6H5)2P]2}2Pd2+ 2SO3F−

Reaction of lithiated bis(diphenylphosphino)amine, [(C₆H₅)₂P]₂N^? Li⁺, with K₂PtCl₄ or PdCl₂ (in the presence of trimethylphosphine) yields the homoleptic bis[bis(diphenylphosphino)amide] complexes I and II, respectively. With NiCl₂/(CH₃)₃P the chloro-bridged dinuclear complex III is obtained. A symmetrical bonding of the Ph₂P-·N-·PPh₂ anion to the metal through the phosphorus atoms is indicated for these diamagnetic, deep-yellow (I, II) or red (III) complexes by ³¹P NMR spectroscopy (J(PtP) 1812 Hz for I). I and II are dissolved in CF₃COOH with protonation at the nitrogen atoms to give bis(diphenylphosphino)amine complexes IV and V, respectively (J(PtP) 2080 Hz for IV). IV and V are 1:2 electrolytes in CH₃NO₂. Methylation of I-III with CH₃OSO₂F leads to the bis(diphenylphos-phino)methylamine complexes VI-VIII, of which the palladium compound VII has been structurally characterized by single crystal X-ray diffraction. VII contains a planar CNP₂PdP₂NC skeleton and is thus based on planar ligand arrays both at Pd and at the two N atoms.     

Indenyl and fluorenyl transition metal complexes.: IV. Reactions of 2- and 4-azafluorenes with chromium hexacarbonyl

Reactions of 2- and 4-azafluorenes (I, II) and their methyl derivatives, 3-methyl-2-azafluorene (III) and 7-methyl-4-azafluorene (IV) with chromium hexacarbonyl in a $\text{1}\text{1}$ diglyme/heptane mixture at 140°C have been studied. A N-donor complex, C₁₂H₉NCr(CO)₅ is formed in the reaction of I with Cr(CO)₆. Compounds II–IV react to give arenechromiumtricarbonyl derivatives with benzene rather than pyridine ring bound to the metal. [η⁶-(4b,5,6,7,8,9b)-4-Azafluorene]chromiumtricarbonyl (VIII) gives the corresponding hydrochloride under the action of HCl. Methyl iodide decomposes VIII to produce 4-azafluorene iodomethylate. Deprotonation of VIII with BuLi in ether at ?20°C followed by dilution with hexane leads to precipitation of the corresponding Li salt (Xb), having η⁶-structure. Methylation of Xb with methyl iodide proceeds stereospecifically to yield the exo-methyl derivative XII. Treatment of VIII with excess t-BuOK at 25°C in THF results in a mixture of η⁶-(Xa) and η⁵-anions (XI), the former predominating.     

Nitrogen elimination in the mass spectra of diphenyl and triphenyl-v-triazoles

The mass spectra of seven v-triazoles (I to VII), having two or three phenyl substituents in 1, 4 and 5 positions, are described. Differences in the rate of nitrogen elimination from themolecular ions of I to III and IV to V are explained by the statement that this reaction requires a higher energy of activation for the transition state in IV to V than in I to III. At high electron voltages the relative intensities of fragment ions and metastable ions are very similar in the mass spectra of 1,4,5 triphenyl-v-triazole (I) and the ketenimine (VIII). Differences in the low electron voltage spectra of I and VIII, and energy measurements, however, show that probably an azirine ion IX is involved in the formation of the [M-N₂]⁺ ion from I. It is shown that production of the rearrangement ion m/e 165 (C₁₃H₉) isa high energy process.     

Reactivity of tert‐butylperoxyl radical with manganese(III), cobalt(II), and nickel(II) salicylidene Schiff base chelates

Salicylidene Schiff base chelates (R,R)‐(–)‐N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐cyclohexanediaminomanganese(III) chloride, (R,R)‐(–)‐N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐cyclohexanediaminocobalt(II), N,N′‐bis(salicylidene)‐ethylenediaminocobalt(II), N,N′‐bis(salicylidene)ethylenediaminonickel(II), and N,N′‐bis(salicylidene)ethylenediaminoaquacobalt(II), as well as (R,R)‐(–)‐N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)1,2‐cyclohexanediamine, were kinetically examined as antioxidants in the scavenging of tert‐butylperoxyl radical (tert‐butylOO^?). Absolute rate constants and corresponding Arrhenius parameters were determined for reactions of tert‐butylOO^? with these chelates in the temperature range ?52.5 to ?11°C. High reactivity of tert‐butylOO^? with Mn(III) and Co(II) salicylidene Schiff base chelates was established using a kinetic electron paramagnetic resonance method. These salicylidene Schiff base chelates react in a 1:1 stoichiometric fashion with tert‐butylOO^? without free radical formation. Ultraviolet–visible spectrophotometry and differential pulse voltammetry established that the rapid removal rate of tert‐butylOO^? by these chelates is the result of Mn(III) oxidation to Mn(IV) and Co(II) oxidation to Co(III) by tert‐butylOO^?. It is concluded that removal of alkylperoxyl radical by Mn(III) and Co(II) salicylidene Schiff base chelates may partially account for their biological activities. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 431–439, 2007     

Metallacycloalkanes : II. Reactions of α,α′-bipyridyl-5-nickela-3,3,7,7-tetramethyl-trans-tricyclo[4.1.0.02,4]heptane

The title compound (II) underwent reductive elimination on treatment with maleic anhydride, tetracyanoethylene or triphenylphosphite to give 3,3,6,6,-tetramethyl-trans-tricyclo[3.1.0.0^2,4]hexane (III). With triphenylphosphite bi(2,2-dimethylcyclopropyl) (V) and 1-(2,2-dimethylcyclopropyl)-3-methyl-1,3-butadiene (VI) were also formed. Acidolysis of II with either HCl, malonic acid or methanol gave V. An intermediate complex α,α′-bipyridyl(phenoxy)-3-nickel-1,1′-bi-(2,2′-dimethylcyclopropyl) (VIII) was isolated by reaction of II with phenol. Methylene dibromide reacts with II to give III and 3,3,7,7-tetramethyl-trans-tricyclo[4.1.0.0^2,4]heptane (IV). With triethylaluminum and II complete exchange of the alkyl groups occurred and V was released on hydrolysis. Trifluoroborane diethyl ether and II gave 3,3,6,6-tetramethylcyclohexa-1,4-diene in a rearrangement-displacement reaction. The cyclodimerisation of 3,3-dimethylcyclopropene (I) to III catalysed by II and the fact that II can be recovered from the reaction mixture provides strong evidence for the intermediacy of metallacyclopentanes in these transition-metal-catalysed [2π + 2π] cyclo-additions.     

Zur spektralphotometrischen Bestimmung von Uran(VI) in Gegenwart einiger Fremdelemente mit Hilfe von Halogenderivaten der Essigs?ure

Zusammenfassung Die Pufferlösungen CH₂ClCOOH + CH₂ClCOONa (I), CH₂BrCOOH + CH₂BrCOONa (II) und CH₂JCOOH + CH₂JCOONa (III) wurden als Reagentien für die Uranbestimmung vorgeschlagen.Das Beersche Gesetz wird für den Konzentrationsbereich von 0,11903 bis 2,85684 mg/ml Uran mit 0,1 m Reagenslösungen befolgt. Y³⁺, Ce³⁺ und Th⁴⁺ sind ohne Einfluß.Für den Konzentrationsbereich von 0,11903–3,80912 mg/ml Uran werden 1 m Reagenslösungen angewendet. Bei Verwendung von (I) oder (II) stören Y³⁺, Ce³⁺ und Th⁴⁺ nicht. Wird (III) benutzt, muß man zur Vermeidung der Störung durch Thorium, Uran mit Essigester extrahieren.

---

Summary The buffer solutions CH₂ClCOOH + CH₂ClCOONa (I), CH₂BrCOOH + CH₂BrCOONa (II) and CH₂ICOOH + CH₂ICOONa (III) are shown to provide new reagents for the spectrophotometric determination of uranium.The method can be used for the direct determination of 0.11903 to 2.85684 mg of uranium with. 0.1 M reagents, when Y³⁺ or Ce³⁺ or Th⁴⁺ are present. With 1 M concentrations, 0.11903 to 3.80912 mg of uranium can be directly determined in presence of Y³⁺ and Ce³⁺; with (I) or (II), thorium has no effect on the absorbance, too; with. (III) uranium must be previously extracted into ethyl acetate.

     

X‐ray structure and density functional theory studies of an unexpected product: trans‐bis{2‐[(2‐cyanoethyl)iminomethyl]phenolato}copper(II)

The title compound, [Cu(C₁₀H₉N₂O)₂] or [Cu^II(CYMB)₂], (I), was obtained in an attempt to reduce trans‐bis(2‐{[3,5‐bis(trifluoromethyl)phenyl]iminomethyl}phenolato)copper(II), [Cu(TIMB)₂], (II), with bis(pentamethylcyclopentadienyl)cobalt(II) [decamethylcobaltocene, Cp*₂Co, (III)]. The molecular structure of (I) has the Cu^II centre located on an inversion centre of the C2/c space group. A density functional theory (DFT) analysis at the B3LYP/Lanl2dz(CuF);6‐31G**(CHNO) level performed in order to optimize the structures of the free ligands CYMB⁻ and TIMB⁻, and the metal complexes [Cu^I/II(CYMB)₂]^−/0 and [Cu^I/II(TIMB)₂]^−/0, reproduced well the X‐ray diffraction structure and allowed us to infer the insertion of the cyanomethide anion on the 3,5‐bis(trifluoromethyl)phenyl system from an evaluation of the Mulliken atomic charges and the electronic energies.     

Bis(trimethylsilyl)amino-halogenoborane und ihre cyclischen Kondensationsprodukte

Zusammenfassung Bis-[bis(trimethylsilyl)amino]-fluorboran (I), Bis-(trimethylsilyl)-amino-dichlorboran (II) und Bis-[bis(trimethylsilyl)-amino]-chlor-boran (III) werden durch Umsetzung von BCl₃ und BF₃ mit NaN(Sime ₃)₂ in Äther dargestellt. Alle Verbindungen lassen sich thermisch unter Abspaltung von Trimethylhalogenosilanen kondensieren. Während II zu B-Trichloro-N-tris(trimethylsilyl)-borazol kondensiert, ergeben I und III überraschend ein viergliedriges B–N-Ringsystem.Phenyl-alkoxy-bis(trimethylsilyl)aminoborane gehen ähnliche Kondensationsreaktionen ein.

---

Bis-[bis(trimethylsilyl)amino]-fluoroborane (I), bis(trimethylsilyl)amino-dichloroborane (II) and bis-[bis-(trimethylsilyl)amino-]chloroborane (III) were synthesized by reaction of BF₃ and BCl₃ with sodium-bis(trimethylsilyl)-amide. All compounds undergo thermal condensation under elimination of the corresponding trimethylhalosilane. So II forms B-trichloro-N-tris(trimethylsilyl)-borazene, while I and III unexpectedly yield a fourmembered B–N-ring system. Phenyl-alkoxy-bis-(trimethylsilyl)-aminoboranes condense in a similar way to B-phenyl-N-trimethylsilyl-borazene.

     

Einige neue Hydrazinosilane

A series of novel hydrazinosilanes, e. g. the bis(hydrazino) dimethylsilanes I and II, the amino-hydrazino-dimethylsilanes III–V, the bis(hydrazino)disilane VI with (+ 3)valent Si and (?2)valent N and the trialkoxysilylhydrazines VII and VIII, were prepared as shown in the reactions (1) to (6) and characterized by their physical properties.