Rhodium ion catalyzed decomposition of aryldiazoalkanes

Aryldiazomethanes are converted by rhodium(II) acetate and iodorhodium(III) tetraphenylporphyrin to $\text{cis}$- rather than $\text{trans}$-1,2-diarylethylenes. Secondary aryldiazoalkanes react with rhodirum(II) acetate to give azines.     

Kinetics of acid catalyzed and Ag(I) catalyzed decomposition of peroxodisulfate in aqueous medium

The mechanism of acid catalyzed decomposition of peroxodisulfate, (S₂O) in aqueous perchlorate medium involves the hydrolysis of the species H₂S₂O₈ and HS₂O and the homolysis of the species H₂S₂O₈, HS₂O and S₂O at the O? O bond. The overall rate law when 1.4M > [HClO₄] > 0.1M is The constants k′ and k″ contain the hydrolysis and homolysis rate constants of HS₂O₈^? and H₂S₂O₈, respectively. With added Ag(I), the acid catalyzed and Ag(I) catalyzed reactions take place independently. Ag(I) catalyzed decomposition appears to involve the species AgS₂O (aq).     

Rhodium(I) catalyzed carbonylation reactions of halides and ethers

Benzylic bromides and methyl iodide react with ethers, carbon monoxide, potassium iodide, and the dimer of chloro(1,5-hexadiene)rhodium($\text{I}$) to give esters in good yields.     

Rhodium(I) catalyzed four-component reaction of Fischer alkenyl carbene complexes and 1,1-diphenylallene

Alkyl substituted chromium Fischer carbene complexes react with 1,1-diphenylallene in the presence of rhodium(I) catalysts (10 mol%) to yield highly substituted dienyl indenone derivatives. In this process a catalytic chromium(0)-rhodium(I) exchange occurs, four new C-C bonds are created, and four-components (two allenes, the carbene ligand and one CO ligand) are joined in a chemo- and regioselective manner.     

Electro-oxidation of formic acid catalyzed by FePt nanoparticles

The electrocatalytic oxidation of formic acid at a gold electrode functionalized with FePt nanoparticles was studied by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in a mixed solution of 0.1 M HCOOH and 0.1 M HClO4. The FePt bimetallic nanoparticles, with a mean diameter of 3 nm, were prepared by a chemical reduction method. The Au/FePt nanostructured electrode was prepared firstly by the deposition of FePt nanoparticles onto a clean Au electrode surface, followed by ultraviolet ozone treatment to remove the organic coating. In CV measurements, two well-defined anodic peaks were observed at +0.20 and +0.51 V (vs. a Ag/AgCl quasi-reference). The anodic peak at +0.20 V was attributed to the oxidation of HCOOH to CO2 on surface unblocked by CO, whereas the peak at +0.51 V was ascribed to the oxidation of surface-adsorbed CO (an intermediate product of HCOOH oxidation) and further oxidation of bulk HCOOH. From the onset potential and current density of the electro-oxidation of HCOOH, FePt nanoparticles exhibit excellent electrocatalytic activities as compared to Pt and other metal alloys. EIS measurements were carried out to further examine the reaction kinetics involved in the HCOOH electro-oxidation. The EIS responses were found to be strongly dependent on electrode potentials. At potentials more positive than -0.25 V (vs. Ag/AgCl), pseudo-inductive behavior was typically observed. At potentials between +0.3 and +0.5 V, the impedance response was found to reverse from the first quadrant to the second quadrant; such negative Faradaic impedance was indicative of the presence of an inductive component due to the oxidation of surface-adsorbed CO. The impedance responses returned to normal behavior at more positive potentials (+0.6 to +0.9 V). The mechanistic variation was attributed to the formation of different intermediates (CO or oxygen containing species) on the electrode surface in different potential regions. Two equivalent circuits were proposed to model these impedance behaviors.     

Pseudotetrahedral Rhodium(I) Complexes

A combination of four‐electron donors, such as alkynes, with strongly donating and strong‐field scorpionate ligands is appropriate to create pseudotetrahedral rhodium(I) environments, as found in [Rh(PhBP₃)(HC?CPh)], which promotes H?C bond activation and C?C coupling reactions under very smooth conditions.     

High-quality hydrogen from the catalyzed decomposition of formic acid by Pd-Au/C and Pd-Ag/C

Pd-Au/C and Pd-Ag/C were found to have a unique characteristic of evolving high-quality hydrogen dramatically and steadily from the catalyzed decomposition of liquid formic acid at convenient temperature, and further this was improved by the addition of CeO(2)(H(2)O)(x).     

Rhodium(I) derivatives of diethylbispyrazolylborate

Bis-substituted rhodium(I) polypyrazolylborates of the type L₂RhBPz₂Et₂ (L = CO or RNC where R = p-CH₃C₆H₄, t-C₄H₉ or p-CH₃C₆H₄SO₂CH₂) have been prepared and characterized and hence the analogous rhodium(III) derivatives by oxidative addition reactions with iodine, iodomethane, or mercury(II) chloride.     

Copper(I)-picolinic acid catalyzed N-arylation of hydrazides

An efficient copper-catalyzed carbon-nitrogen bond formation is described. The copper(I) complex with commercially available 2-picolinic acid ligand was found to be effective in N-arylation of N-Boc-hydrazine. This methodology offers a regioselective N-arylation of hydrazides using a variety of substituted aryl iodides.     

Theoretical investigation of the formic acid decomposition kinetics

Decomposition of formic acid (HCO₂H) proceeds via three unimolecular channels: dehydration, decarboxylation, and dissociation, the latter expected to be of minor contribution to the overall kinetics. In addition, despite the similar values reported for the individual activation energies for the dehydration and decarboxylation reactions, experimental works have shown that the former is dominant in the reaction mechanism. These reactions show pressure-dependent rate coefficients, and the high-pressure condition is not yet verified at atmospheric pressure. This work aims to investigate the influence of temperature and pressure on the rate coefficients. Hence, theoretical calculations at the CCSD(T)/CBS level have been performed to accurately describe the unimolecular reaction and Rice-Ramsperger-Kassel-Marcus (RRKM) rate coefficients have been calculated and integrated for the prediction of k(T,P) rate coefficients, adopting both strong and weak collision models, over the intervals 0.5-10 atm and 298-2200 K. Our results suggest that the isomerization path is important and explains the preference for the (CO + H₂O) channel. Rate coefficients for the (CO₂ + H₂) and (CO + H₂O) formations are given, in s⁻¹, as exp(−34404/T) and exp(−33785/T), respectively. The dissociation limit of 107.29 kcal mol^–1, with respect the Z-HCO₂H conformer, leading to OH + HCO, via a barrierless potential curve, with rate coefficients, in s⁻¹, expressed as k_HCO+OH(T) = 1.68 × 10¹⁷ exp(−56018/T). Temperature and pressure dependence for the HCO + OH → CO₂ + H₂ and HCO + OH → CO + H₂O reactions have also been estimated.     

Rhodium(I) Tristyrylphosphine Cyclooctadiene Complexes

Rhodium complexes with unsaturated phosphines as ligands were studied by NMR spectroscopy. Tris[(E,Z,Z)-styryl)phosphine is a stronger complex-forming agent compared with tris[(Z,Z,Z)-styryl)phosphine in view of the easier accessibility of its lone electron pair. The composition of the complexes and their NMR parameters suggest a square-planar structure with cis phosphine ligands.     

Rhodium(I)-catalyzed cycloisomerizations of bicyclobutanes

The selection of rhodium precatalyst and phosphine ligand determines the course of the cycloisomerization of N-allylated bicyclo[1.1.0]butylalkylamines. Cyclopropane-fused pyrrolidines and azepines are obtained with high levels of stereo- and regiocontrol. Novel azatricyclo[6.1.0.0(1,5)]nonanes are the result of a tandem cycloisomerization-ring closing metathesis sequence. Allylic ethers lead to furans and oxepanes.     

Rhodium(I) and iridium(I) complexes of pyrazolyl-N-heterocyclic carbene ligands

Several Rh(I) and Ir(I) complexes containing an N-heterocyclic carbene-pyrazolyl chelate ligand have been synthesised. Determination of the single-crystal X-ray structure of the Ir(I) complex showed a novel binding mode with the iridium centre coordinated to two ligands via two carbene donors in preference to one ligand forming the entropically favoured chelate. The hydrogenation activity of several of these complexes was investigated along with that of previously synthesised Rh(I) and Ir(I) complexes containing an analogous phosphine-pyrazolyl chelate.     

Progress of fundamental mechanism of formic acid decomposition and electrooxidation

Formic acid(HCOOH) is considered as a promising viable fuel-cell ingredient for low temperature proton-exchange membrane fuel cells as a consequence of their high safety and energy density. As one prototype reaction, the study of HCOOH decomposition and electrooxidation is also helpful to understand the reaction mechanism of other small molecular organics. Herein, we present a comprehensive overview of HCOOH decomposition and electrooxidation in different environment conditions and analyze the r...     

Rhodium(III) catalyzed oxidation of cyclic ketones by alkaline hexacyanoferrate(III)

The kinetics of the oxidation of 2-methyl cyclohexanone and cycloheptanone with Fe(CN)₆ ³⁻ catalyzed by RhCl₃ in alkaline medium was investigated at four temperatures. The rate follows direct proportionality with respect to lower concentrations of hexacyanoferrate(III) ion, but tends to become zero order at higher concentrations of the oxidant, while the reaction shows first-order kinetics with respect to hydroxide ion and cyclic ketone concentrations. The rate shows a peculiar nature with respect to RhCl₃ concentrations in that it increases with increase in catalyst at low catalyst concentrations but after reaching a maximum, further increase in concentration retards the rate. An increase in the ionic strength of the medium increases the rate, while increase in the Fe(CN)₆ ⁴⁻ concentration decreases the rate.