Cross-coupling reactions of gold(I) alkynyl and polyyndiyl complexes

Gold(I) alkynyl complexes are shown to efficiently couple with aryl iodides under mild conditions in the presence of both Pd(II) and Cu(I) co-catalysts. The reaction is not gold catalysed, but rather the Au(I) centre serves to transfer the alkynyl moiety to Cu(I), which then enters the conventional Sonogashira cycles. Using this method, a small range of 1,4-disubstituted diynes, including examples of differentially substituted compounds ArCCCCAr′, have been prepared directly from [(Ph₃P)AuCCCCAu(PPh₃)] and aryl iodides ArI.     

Chlorobis(polyfluorophenyl)thallium(III) complexes and their reactions with gold(I) and tin(II) compounds

The reaction of TlCl₃ with RLi leads to complexes of the general formula TlR₂Cl (R = C₆F₅, p-C₆F₄H, m-C₆F₄H, 2,4,6-C₆F₃H₂, p-C₆FH₄ or m-CF₃C₆H₄). Some of these undergo oxidative addition reactions with gold(I) complexes to give polyfluorophenyl derivatives of the types AuR₂ClL and Au(C₆F₅)R₂(tht) (tht = tetrahydrothiophen), and with SnCl₂ to give oily materials from which stable solids of the general formula Q[SnR₂Cl₃] can be isolated by addition of QCl (Q = Et₄N or Ph₃BzP).     

An efficient homogeneous gold(I) catalyst for N-alkylation of amines with alcohols by hydrogen autotransfer

A new and highly efficient homogeneous [Ph₃PAuCl]/AgOTf catalytic system was developed in N-alkylation reaction of primary amines with alcohols through a hydrogen autotransfer process. This Au(I) catalytic system shows excellent selectivity for mono-alkylation of primary amines with benzyl alcohol under moderate temperature of 100 °C (only secondary amines as product). The possible mechanism of this hydrogen autotransfer reaction with the catalytic system was proposed.     

Preparation and properties of stable mono-, tris-, tetrakis- or hexakis(pentahalophenyl)thalliate(III) complexes

Reaction of TlR₂X, TlX₃ and [TlX₄^? with RLi ( R = C₆F₅ or C₆Cl₅) leads to derivatives containing anions of the types [TlR₄]^?, [TlR₂R′₂]^? or [TlR₆]^3?. Reactions of TlCl₃ with [TlR₄]^? lead to [(μ-Cl)(TlR₂Cl)₂]^? (R = C₆F₅) or [TlRCl₃]^? (R = C₆Cl₅) while addition of X^? (X = Br^? or SCN^?) to Tl(C₆Cl₅)₃ gives [Tl- (C₆Cl₅)₃X]^?. All the novel anions were isolated as salts of bulky cations (Me₄N, Bu₄N, PPN or Ph₃BzP).     

Preparation of Pd(II) enolate complexes and their reactions

Palladium(II) enolate complexes have been prepared by the reaction of Pd(II)Cl₂-(PhCN)₂ with trimethylsilyl enol ethers and reacted with CO and ethylene.     

8-Oxyquinolate iridium(I) complexes and their oxidative-addition reactions

The novel sixteen-electron complex [Ir(Oq)(COD)] (Oq = 8-oxyquinolate; COD = 1,5-cyclooctadiene) adds monodentate phosphines, phosphites or activated olefins irreversibly to give pentacoordinate iridium(I) complexes of the type [Ir(Oq)(COD)L] (L = PPh₃, P(OPh)₃, maleic anhydride or tetracyano-ethylene). Reaction of [Ir(Oq)(COD)] with some diphosphines leads to substitution products of the general formula [Ir(Oq)(diphos)] (diphos = 1,2-bis(diphenylphosphino)ethane or cis-1,2-bis(diphenylphosphino)ethylene). Carbon monoxide displaces the COD group from the complexes giving either [Ir(Oq)(CO)₂] or [Ir(Oq)(CO)L], and the latter undergo oxidative addition reactions with SnCl₄, Me₃SiCl, Me₃SnCl, MeI, allylbromide, PhCOCl, MeCOCl, Cl₂, Br₂, TlCl₃ and HCl leading to novel iridium(III) complexes.     

Bis(ethylene)dithioformamidinium dihalides and their copper(I), silver(I) and gold(I) complexes

The bis(ethylene)dithioformamidinium dihalides (En₂Tu₂X₂, X = Cl(H₂O), Br, I), obtained by oxidation of ethylenethiourea, and their complexes MX.En₂Tu₂X₂ (M = Cu, X = Br[0.2 DMF]; M = Ag, X = Br; M = Au, X = Cl), 2MX. 1.5 En₂Tu₂X₂ (M = Cu, X = Cl[0.4 DMF]; M = Ag, X = I), MX. 1.5 En₂Tu₂X₂ (M = Cu, X = I; M = Au, X = Br), AgCl. 1.25 En₂Tu₂Cl₂, 4AgI. 1.5 En₂Tu₂I₂, AuI.2En₂Tu₂I₂, were prepared and studied by i.r. spectroscopy. The En₂Tu²⁺₂ ion is N-bonded to the metal ion. Some νMN and νMX bands are tentatively assigned.     

Silver(I) and gold(I) complexes of rhodanine

Summary Some rhodanine (HL) complexes of silver(I) and gold(1) have been prepared and studied by conductivity measurements and by i.r. spectroscopy. Structures for the complexes are proposed.     

Synthesis, structure, and reactions of binuclear gold(I) complexes containing two different bridging ligands

The binuclear cycloaurated compounds [Au(2)(mu-C(6)H(3)-2-PPh(2)-n-Me)(2)] (n = 5, 1a; n = 6, 1b) react with the digold(I) complexes [Au(2)(mu-S(2)CN(n)()Bu(2))(2)] and [Au(2)(mu-dppm)(2)](PF(6))(2) to give heterobridged dinuclear complexes [Au(2)(mu-C(6)H(3)-2-PPh(2)-n-Me)(mu-S(2)CN(n)Bu(2))] (n = 5, 5a; n = 6, 5b) and [Au(2)(mu-C(6)H(3)-2-PPh(2)-n-Me)(mu-dppm)]PF(6), (n = 5, 9a; n = 6, 9b), respectively. Complex 5a exists in the solid state as an infinite zigzag chain of dimeric units with intramolecular Au-Au separations of 2.8331(3) and 2.8243(3) A for independent molecules and intermolecular Au-Au separations of 3.0653(3) and 3.1304(3) A. Both 5a and 5b undergo oxidative addition with halogens to give the heterovalent, gold(I)-gold(III) compounds [XAu(I)(mu-2-Ph(2)PC(6)H(3)-n-Me)Au(III)X(eta(2)-S(2)CN(n)Bu(2))] [n = 5, X = Cl (6a), I (8a); n = 6, X = Cl (6b), Br (7b), I (8b)]. Compound 8a has been shown by X-ray crystallography to contain a gold(III) atom coordinated in a planar array by bidentate, chelating di-n-butyldithiocarbamate, iodide, and the sigma-aryl carbon atom, together with a gold(I) atom that is linearly coordinated by the phosphorus atom of the arylphosphine and by iodide. The intramolecular gold-gold distance of 3.2201(3) A indicates little or no interaction between the metal atoms. In contrast to the behavior of the homobridged complexes 1a and 1b, the heterobridged dithiocarbamate complexes 5a and 5b give structurally similar products on reaction with halogens, irrespective of the position of the ring methyl substituent. Crystal data for [Au(2)(mu-C(6)H(3)-2-PPh(2)-5-Me)(mu-S(2)CN(n)Bu(2))] (5a): triclinic, space group P1 (No. 2), with a = 11.3398(1), b = 15.9750(2), c = 16.4400(3) A, alpha = 91.0735(9), beta = 109.3130(7), gamma = 90.7666(8) degrees, V = 2809.47(6) A(3), and Z = 4. Crystal data for [IAu(I)(mu-2-Ph(2)PC(6)H(3)-5-Me)Au(III)I(eta(2)- S(2)CN(n)Bu(2))] (8a): triclinic, space group P1 (No. 2), with a = 8.6136(2), b = 9.3273, c = 21.1518(4) A, alpha = 84.008(1), beta = 84.945(1), gamma = 75.181(1) degrees, V = 1630.54(6) A(3), and Z = 2.     

The ammine, thiosulfato, and mixed ammine/thiosulfato complexes of silver(I) and gold(I)

The M(I)-NH(3), M(I)-S(2)O(3)(2)(-), and M(I)-S(2)O(3)(2)(-)-NH(3) systems (M = Ag, Au) were studied at 25 degrees C and at I = 0.1 M (NaClO(4)) using a variety of analytical techniques. For the Ag(I)-NH(3)-S(2)O(3)(2)(-) system, AgS(2)O(3)NH(3)(-) was detected with formation constant log beta(111) (for the reaction Ag(+) + S(2)O(3)(2)(-) + NH(3) <--> AgS(2)O(3)NH(3)(-)) of 11.2, 10.4, and 10.8 on the basis of silver potentiometry, UV-vis spectrophotometry, and hydrodynamic voltammetry, respectively. Also, the values of log beta(101)(AgNH(3)(+)), log beta(102)(Ag(NH(3))(2)(+)), log beta(110)(AgS(2)O(3)(-)), and log beta(120)(Ag(S(2)O(3))(2)(3)(-)), obtained from silver potentiometry, were 3.59, 7.0, 8.97, 13.1, respectively. In the case of the ammine complexes, the log beta(101)(AgNH(3)(+)) and log beta(102)(Ag(NH(3))(2)(+)) values were found to be 3.5 and 7.1, respectively, from the UV-vis spectrophotometric experiments. The mixed species AuS(2)O(3)NH(3)(-) was detected in UV-vis spectrophotometric, hydrodynamic voltammetric, and potentiometric experiments with the stepwise formation constants (log K(111)) of -4.0, -3.5, -3.8, respectively, for the reaction Au(S(2)O(3))(2)(3)(-) + NH(3) <--> AuS(2)O(3)NH(3)(-) + S(2)O(3)(2)(-). At higher [NH(3)]/[S(2)O(3)(2)(-)] ratios (>10(5)), the formation of Au(NH(3))(2)(+) was also detected in spectrophotometric and potentiometric experiments with stepwise formation constants (log K(102)) of -5.4 and -5.3, respectively, according to the reaction AuS(2)O(3)NH(3)(-) + NH(3) <--> Au(NH(3))(2)(+) + S(2)O(3)(2)(-).     

A gold(I)-catalyzed intramolecular reaction of propargylic/homopropargylic alcohols with oxirane

The gold(I)-catalyzed cycloisomerization of epoxy alkynes in the presence of a nucleophile is an efficient protocol to provide ketal skeletons with high stereoselectivity. An intramolecular reaction of propargylic/homopropargylic alcohols with oxirane to produce ketal/spiroketals in moderate yields under mild conditions has been reported. Moreover, the mechanism of this kind of reaction has been discussed on the basis of a series of control and (18)O tracer experiments.     

Mixed-ligand complexes of gold(I) and silver(I) with heterocyclic thiones

Summary Novel mixed-ligand complexes of Ag¹ and Au¹ containing triphenylphosphine (TPP) and heterocyclic thiones, of general formula [TPP–M–L]Cl and [(TPP)₂–M–L]Cl, where L=imidazolidine-2-thione (Imt), 1,3-diazinine-2-thione (Diaz) or N-isopropylimidazolidine-2-thione (iPrImt) have been prepared. The spectroscopic data are consistent with S-donation in all complexes. The magnitude of high-field shift in carbon-13 n.m.r. of the thioureide carbon on complexation is interpreted in terms of coordination geometry around the metal atoms. The mixed-ligand complexes are structurally similar to some of the commonly used antiarthritic Au¹ drugs and are thus potentially useful in chemotherapy.     

Preparation of polymer incarcerated gold nanocluster catalysts (PI-Au) and their application to aerobic oxidation reactions of boronic acids,alcohols, and silyl enol ethers

Heterogeneous gold nanocluster catalysts immobilized by the method known as polymer incarceration were prepared. Polystyrene-derived polymers with epoxide and alcohol moieties, which could be cross-linked under heating conditions, were employed as supports for their preparation. Cationic gold salts were reduced in a solution of NaBH₄ and the polymers. Poor solvents for the polymers were added, and the polymers were precipitated and encapsulated gold nanoclusters with weak but multiple interactions between a gold nanocluster surface and the π electrons of benzene rings. The polymer capsules were heated under neat conditions to afford heterogeneous gold nanocluster catalysts; namely, polymer-incarcerated gold nanoclusters. The catalysts thus prepared could be applied to the aerobic oxidation of phenyl boronic acids, alcohols, and silyl enol ethers. We found that the choice of polymers, good and poor solvents for the polymers, metal loadings, heating conditions for cross-linking, and final activation were all crucial for obtaining high-activity catalysts.     

Photosensitive azobispyridine gold(I) and silver(I) complexes

The neutral and cationic dinuclear gold(I) compounds [(μ-N-N)(AuR)(2)] (N-N = 2,2'-azobispyridine (2-abpy), 4,4'-azobispyridine (4-abpy); R = C(6)F(5), C(6)F(4)OC(12)H(25)-p, C(6)F(4)OCH(2)C(6)H(4)OC(12)H(25)-p) and [(μ-N-N){Au(PR(3))}(2)](CF(3)SO(3))(2) (N-N = 2-abpy, 4-abpy, R = Ph, Me) have been obtained by displacement of a weakly coordinated ligand by an azobispyridine ligand. The corresponding silver(I) dinuclear [(μ-2-abpy){Ag(CF(3)SO(3))(PPh(3))}(2)] and polynuclear [{Ag(CF(3)SO(3))(4-abpy)}(n)] compounds have been obtained. The molecular structures of [(μ-2-abpy){Au(PPh(3))}(2)](CF(3)SO(3))(2) and [(μ-4-abpy){Au(PMe(3))}(2)](CF(3)SO(3))(2) have been confirmed by X-ray diffraction studies and feature linear gold(I) centers coordinated by pyridyl groups, and non-coordinated azo groups. In contrast the X-ray structure of [(2-abpy){Ag(CF(3)SO(3))(PPh(3))}(2)] shows tetracoordinated silver(I) centers involving chelating N-N coordination by pyridyl and azo nitrogen atoms. The gold(I) compounds with a long alkoxy chain do not behave as liquid crystals, and decompose before their melting point. The soluble gold(I) derivatives are photosensitive in solution and isomerize to the cis azo isomer under UV irradiation, returning photochemically or thermally to the most stable initial trans isomer. The silver(I) derivative [(2-abpy){Ag(CF(3)SO(3))(PPh(3))}(2)] also photoisomerizes in solution under UV irradiation, showing that its solid state structure, which would block isomerization by azo coordination, is easily broken. These processes have been monitored by UV-vis absorption and (1)H NMR spectroscopy. All these compounds are non-emissive in the solid state, even at 77 K.     

Cobalt(II) catalyzed tosylation of alcohols with p-toluenesulfonic acid

Cobalt(II) chloride hexahydrate (CoCl₂·6H₂O) has been found to catalyze the tosylation of both aliphatic and aromatic alcohols with p-toluenesulfonic acid (p-TsOH) in high yields in 1,2-dichloroethane under reflux (ca. 80 °C). In the case of aliphatic alcohols, secondary alcohols undergo tosylation chemoselectively in the presence of primary hydroxy groups.     

Alkylation of cyclic amines with alcohols catalyzed by Ru(II) complexes bearing N-Heterocyclic carbenes

This paper includes the synthesis of 2-(1,3-dioxane-2-yl)ethyl substituted benzimidazole substituted N-heterocyclic carbenes precursors and their ruthenium complexes. Synthesized compounds were characterized by elemental analysis and NMR spectroscopy. All complexes have been tested in the alkylation of pyrrolidine and morpholine with alcohols, showing an excellent activity in this reaction.     

Synthesis, structural characterization, and theoretical studies of gold(I) and gold(I)-gold(III) thiolate complexes: quenching of gold(I) thiolate luminescence

The gold(I) thiolate complexes [Au(2-SC6H4NH2)(PPh3)] (1), [PPN][Au(2-SC6H4NH2)2] (2) (PPN = PPh3=N=PPh3), and [{Au(2-SC6H4NH2)}2(mu-dppm)] (3) (dppm = PPh2CH2PPh2) have been prepared by reaction of acetylacetonato gold(I) precursors with 2-aminobenzenethiol in the appropriate molar ratio. All products are intensely photoluminescent at 77 K. The molecular structure of the dinuclear derivative 3 displays a gold-gold intramolecular contact of 3.1346(4) A. Further reaction with the organometallic gold(III) complex [Au(C6F5)3(tht)] affords dinuclear or tetranuclear mixed gold(I)-gold(III) derivatives with a thiolate bridge, namely, [(AuPPh3){Au(C6F5)3}(mu2-2-SC6H4NH2)] (4) and [(C6F5)3Au(mu2-2-SC6H4NH2)(AudppmAu)(mu2-2-SC(6)H4NH2)Au(C6F5)3] (5). X-ray diffraction studies of the latter show a shortening of the intramolecular gold(I)-gold(I) contact [2.9353(7) or 2.9332(7) A for a second independent molecule], and short gold(I)-gold(III) distances of 3.2812(7) and 3.3822(7) A [or 3.2923(7) and 3.4052(7) A] are also displayed. Despite the gold-gold interactions, the mixed derivatives are nonemissive compounds. Therefore, the complexes were studied by DFT methods. The HOMOs and LUMOs for gold(I) derivatives 1 and 3 are mainly centered on the thiolate and phosphine (or the second thiolate for complex 2), respectively, with some gold contributions, whereas the LUMO for derivative 4 is more centered on the gold(III) fragment. TD-DFT results show a good agreement with the experimental UV-vis absorption and excitation spectra. The excitations can be assigned as a S --> Au-P charge transfer with some mixture of LLCT for derivative 1, an LLCT mixed with ILCT for derivative 2, and a S --> Au...Au-P charge transfer with LLCT and MC for derivative 3. An LMCT (thiolate --> Au(III) mixed with thiolate --> Au-P) excitation was found for derivative 4. The differing nature of the excited states [participation of the gold(III) fragment and the small contribution of sulfur] is proposed to be responsible for quenching the luminescence.     

Synthesis of luminescent gold(I) and gold(III) complexes with a triphosphine ligand

We have synthesized and characterized a series of trinuclear gold(I) complexes [(AuX)(3)(mu-triphos)] (triphos = bis(2-diphenylphosphinoethyl)phenylphosphine; X = Cl 1, Br 2, I 3, C(6)F(5) 4) and di- and trinuclear gold(III) complexes [[Au(C(6)F(5))(3)](n)(mu-triphos)] (n = 2 (5), 3 (6)). The crystal structure of 6 [[Au(C(6)F(5))(3)](3)(mu-triphos)] has been determined by X-ray diffraction studies, which show the triphosphine in a conformation resulting in very long gold-gold distances, probably associated with the steric requirements of the tris(pentafluorophenyl)gold(III) units. Complex 6 crystallizes in the triclinic space group P(-1) with a = 12.7746(16) A, b = 18.560(2) A, c = 21.750(3) A, alpha = 98.215(3) degrees, beta = 101.666(3) degrees, gamma = 96.640(3) degrees, and Z = 2. Chloride substitutions in complex 1 afford trinuclear gold(I) complexes [(AuX)(3)(mu-triphos)] (X = Fmes (1,3,5-tris(trifluoromethyl)phenyl) 7, p-SC(6)H(4)Me 8, SCN 9) and [Au(3)Cl(3)(-)(n)()(S(2)CNR(2))(n)(mu-triphos)] (R = Me, n = 3 (10), 2 (12), 1 (14); R = CH(2)Ph, n = 3 (11), 2 (13), 1 (15)). The luminescence properties of these complexes in the solid state have been studied; at low temperature most of them are luminescent, including the gold(III) derivative 6, with the intensity and the emission maxima being clearly influenced by the nature and the number of the ligands bonded to the gold centers.     

Ynaziridines and their reactions with amines

On the basis of the results of IR and UV spectroscopy, a considerable decrease in the efficacy of the conjugation of the unshared pair of the nitrogen atom with a carbonyl group in ynaziridines as compared with ynamines has been shown. The difference in the electronic structures of these compounds finds its reflection in their chemical behavior: the electrophilicity of the triple bond in an ynaziridine is higher than that in the analogous ynamine in reactions with amines.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 618–622, May, 1985.