Effect of hydrogen bonding of solvent on the thermodynamic stability of cadmium ethylenediamine complexes

Changes in the stability of the cadmium(ii) ethylenediamine complexes in mixed water—DMSO solvents were studied by pH-metry and calorimetry. Complex cations [Cd(en)]²⁺, [Cd(en)₂]²⁺, and [Cd(en)₃]²⁺ are formed in aqueous solutions, and the [Cd(en)₄]²⁺ complex with a partially dentate ligand is stable in DMSO. An increase in the DMSO content in a solvent increases the stability of the complexes. The maximum increase in logK is observed for coordinatively saturated compounds. The thermodynamics of complexation is discussed from the viewpoint of solvation approach. Principal differences in the influence of aqueous-alcohol and aqueous-aprotic solvents on the stability of the metal amino complexes were revealed. Protolytic solvents exert a destabilizing effect on the multiligand complexes, because the coordination sphere is involved in H bonding.     

The Stabilities of the o-Carboxyphenylhydrazo-Ethylacetoacetate OF Cu,Ni, Co,Zn, Mn and Cd Chelate Compounds in Different Solvents

The dissociation constants for o-carboxyphenylhydrazoethylacetoacetate (o-CPHEA) ligand, as well as the stability constants for the divalent metal complexes of Cu, (II), Ni (II), Co (II), Zn (II)and Cd (II) ions, have been calculated pH-meterically in different solvents. The dissociation constans pK₁=4.10 and pK₂=10.55 of the insoluble organic ligand are calculated in aqueous medium. The effect of solvents, the relation between stabilities and both electronegativities and ionization potential are studied.     

Interaction of Co(II), Ni(II), Cu(II), and Zn(II) with N,N′-(aldose)2-thiocarbohydrazide: synthesis,electrochemistry, and spectral characterization

Complexes of Co(II), Ni(II), Cu(II), and Zn(II) with N,N′-(aldose)₂–thiocarbohydrazide (LH₂) were synthesized, isolated as solid products and characterized by analytical means as well as by spectral techniques, FTIR, ¹H NMR, EPR, UV spectroscopy, and CD. All the metal ions formed M[LH]X complexes. Molar conductance values in DMF indicate non-electrolytic complexes. In DMSO with tetramethylammonium chloride supporting electrolyte, the copper complex displays irreversible cyclic voltammetric responses with E _p near ?0.621 and 0.461 V versus Ag/AgCl at scan rate of 0.1 V s^?1. Probable structures for the complexes are proposed.     

Theoretical studies of complexes between Hg(II) ions and l‐cysteinate amino acids

In this study, ab initio and density functional theory methods have been used to understand the structures and thermodynamic stabilities of complexes formed between l ‐cysteine and mercury (II) ions in neutral aqueous solution. To better understand the interaction between sulfur and mercury (II) ion, the MP2, B3LYP, M06‐2X, and TPSS methods have been used to optimize [HgSH_x]^2?x, x = 1–4, complexes and compared to benchmark QCISD(T) structures. Furthermore, energies from these same methods are compared to CCSD(T)/CBS(2,3) energies. From these benchmark calculations, the M06‐2X method was selected to optimize l ‐cysteinate‐Hg(II) complexes and the MP2 method for estimating complex energies. l ‐cysteinate‐mercury (II) ion complexes are formed primarily by forming a bond between cysteinate sulfur and the mercury ion. Stable complexes of l ‐cysteinate and mercury can be formed in 1:1, 2:1, 3:1, and 4:1 ratios. Each complex is stabilized further by interaction between carboxylate oxygen and mercury as well as hydrogen bonding among complex cysteinate ligands. The results indicate that at high cysteinate to Hg(II) ratios high‐coordinate complexes can be present but at lower ratios the 2:1 complex should be dominant. © 2013 Wiley Periodicals, Inc.     

Synthesis, characterisation and electrochemical behaviour of Cu(II), Co(II), Ni(II) and Zn(II) complexes derived from acetylacetone and p -anisidine and their antimicrobial activity

Neutral tetradentate N₂O₂ type complexes of Cu(II), Ni(II), Co(II) and Zn(II) have been synthesised using the Schiff base formed by the condensation of acetylacetone andp-anisidine. Microanalysis, molar conductance, magnetic susceptibility, IR, UV-Vis,¹ H NMR, CV and EPR studies have been carried out to determine the structure of the complexes. From the data, it is found that all the complexes possess square-planar geometry. The EPR spectrum of the copper complex in DMSO at 300 K and 77 K was recorded and its salient features are reported. All the title complexes were screened for antimicrobial activity by the well diffusion technique using DMSO as solvent. The minimum inhibitory concentration (MIC) values were calculated at 37°C for a period of 24 h. It has been found that all the complexes are antimicrobially active and show higher activity than the free ligand.     

Ionic strength effect on the liquid–liquid extraction of zinc(II) and cadmium(II) from sulphate medium by 1-phenyl-3-methyl-4-benzoylpyrazol-5-one in chloroform

The liquid–liquid extraction of zinc(II) and cadmium(II) from sulphate medium by 1-phenyl-3-methyl-4-benzoylpyrazol-5-one (HPMBP) in chloroform is studied. The ionic strength effect of the aqueous phase shows that the extraction of the metal increases with decreasing concentration of sulphate. At initially of about 10^?4?M with three different sulphate concentrations 0.033, 0.16 and 0.33?M in the aqueous phase, Zn(II) and Cd(II) are extracted as the complexes Zn(PMBP)₂ and Cd(PMBP)₂. Sulphate complexes of Zn(II) and Cd(II) are formed in the aqueous phase. The metal–sulphate interaction has been made in evidence by using the Debye–Huckel extended limiting law of ionic activity coefficient.     

Mixed Ligand Complex Formation of Cetirizine Drug with Bivalent Transition Metal(II) Ions in the Presence of 2-Aminomethylbenzimidazole: Synthesis,Structural, Biological,pH-Metric and Thermodynamic Studies

Mononuclear copper(II), cobalt(II) and nickel(II) complexes of cetirizine (CTZ = 2-[2-[4-[(4-chlorophenyl)phenyl methyl]-piperazine-1-yl]-ethoxy]acetic acid) in the presence of 2-aminomethyl-benzimidazole·2HCl (AMBI), as a representative example of heterocyclic bases, were synthesized and studied by different physical techniques. All mixed-ligand complexes have been fully characterized with the help of elemental analyses, molecular weight determinations, molar conductance, magnetic moments and spectroscopic data. The formulae of the isolated complexes are [M(AMBI)(CTZ)(NO₃)(H₂O)₂]·nH₂O where AMBI is the neutral bidentate 2-aminomethylbenzimidazole, CTZ the deprotonated cetirizine and n = 1 for Co(II) or 0 for Cu(II) and Ni(II) complexes. The measured molar conductance values in DMSO indicate that the complexes are non-electrolytes. The formation equilibria of the ternary complexes have been investigated. Ternary complexes are formed by a simultaneous mechanism. Stoichiometry and stability constants for the complexes formed are reported. The concentration distribution of the complexes in solution was evaluated as a function of pH. The thermodynamic parameters were calculated from the temperature dependence of the equilibrium constants and are discussed. The synthesized metal chelates have been screened for their antimicrobial activities against the selected types of Gram-positive (G⁺) and Gram-negative (G^?) bacteria. They were found to be more active against Gram positive than Gram negative bacteria. The antimicrobial activity in terms of metal ions obeys this order: Cu(II) > Ni(II) > Co(II).     

Preconcentration of trace metal ions by combined complexation-anion exchange : Part 2. Cobalt,zinc, cadmium and lead with 8-hydroxyquinoline-5-sulfonic acid [1]

The ligand, 8-hydroxyquinoline-5-sulfonic acid, forms anionic complexes with cobalt(II), zinc(II), cadmium(II), and lead(II), each resulting complex showing a high affinity for anion-exchange resins. The effect of pH, ligand/metal ratio, volume, and concentration on percent retention of the anionic complexes by an anion-exchange resin are reported. At optimum conditions, all four metals are quantitatively retained by the column. Zinc, cadmium and lead(II) ions are completely eluted with 11 ml or less of 2 M HN0₃; cobalt(II) is totally removed by 12 M HCl and 2 M HNO₃. Concentration enhancements of 100-fold are easily achieved. All four anionic complexes can be left on the column for 7 days and still be quantitatively (99%) recovered. A ligand-loaded resin column can also remove all four metals quantitatively. Distribution coefficients for the metal complexes and their ligand/metal ratios were determined by using batch methods that may also serve as the isolation procedure.     

Synthesis,Structure and Solvatochromism Studies on Copper(II) Complexes Containing Ethylenediamine,Pyridine and Imidazol Ligands

Two copper(II) complexes type [Cu(en)X₂](ClO₄)₂, where en = ethylenediamine and X = pyridine, 1 or imidazol, 2 have been synthesized and prepared on the bases of elemental analysis, spectroscopic and molar conductance measurements. The X‐ray crystal analysis of these complexes demonstrated that the copper(II) ions are in square planar environments through coordination by two nitrogen atoms of the ethylenediamine and two nitrogen atoms of two pyridine or imidazol molecules and the ClO₄^‐ ions are bound weakly above and below of the molecular plane. The complexes show three ions behavior in all solvents. The complexes are soluble in various solvents and are solvatochromic. The solvatochromism of the complexes were investigated by UV‐Vis spectroscopy with different solvent parameters such as DN, AN, α and β using multiple linear regression (MLR) method. The results suggested that the DN parameter of the solvent has the most contribution to the shift of the d‐d absorption band of the complex 1 but in complex 2 the DN and β have almost similar importance in the observed variation in the shift of the ν_max values with solvent nature.     

A POTENTIOMETRIC STUDY OF METAL CHELATES WITH PENTAETHYLENEHEXAAMINEOCTAACETIC ACID

Abstract

The protonation constants of pentaethylenehexaamineoctaacetic acid, PHOA, were determined by potentiometric titration in aqueous solution at an ionic strength of 0.10 M KNO₃ and at 25°C. The formation constants of various metal-PHOA complexes were also obtained by titrating mixtures of metal to ligand in molar ratios of 1:1 and 2:1. Calculations were performed with the computer program BEST. Individual formation constants are reported for Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Hg(II) and Pb(II) with PHOA as well as their related protonated species. The stabilities of the 1:1 and 2:1 complexes are similar in many respects to complexes formed with tetraethylenepentaamineheptaacetic acid (TPHA). The similarities in the stabilities of both the 1:1 and 2:1 complexes with PHOA and those with TPHA are explained in terms of ligand denticity and steric effects. Mercury(II)-PHOA complexes exhibited the highest formation constants, followed by copper(II)-PHOA complexes which had higher log K _ML's than those for Co(II), Ni(II), Zn(II), Cd(II) and Pb(II).     

Transition metal complexes of acetamidomalondihydroxamate: synthesis,spectral, thermal and electrochemical studies

Acetamidomalondihydroxamate (K₂AcAMDH) and its manganese(II), iron(II), cobalt(II), nickel(II), copper(II) and zinc(II) complexes were synthesized and characterized by elemental analysis, UV–VIS, IR and magnetic susceptibility. The pK _a1 and pK _a2 values of the dihydroxamic acid in aqueous solution were found to be 8.0?±?0.1 and 9.7?±?0.1. The dihydroxamate anion AcAMDH behaves as a tetradentate bridging ligand through both hydroxamate groups, forming complexes with a metal to ligand ratio of 1?:?1 in the solid state. The FTIR spectra and thermal decompositions of the ligand and its metal complexes were recorded. The redox behavior of the complexes was investigated in aqueous solution by square wave voltammetry and cyclic voltammetry at neutral pH. In contrast to the solid state, in solution the copper(II) and zinc(II) ions form stable complex species with a metal to ligand ratio of 1?:?2. The iron(II) and nickel(II) complexes show a two-electron irreversible reduction behavior, while the copper(II) and zinc(II) complexes undergo reversible electrode reactions. The stability constants of the complexes were determined by square wave voltammetry.     

Preconcentration and separation of iron, zinc, cadmium and mercury, from waste water using Nile blue a grafted polyurethane foam

The present work describes a novel method for the incorporation of Nile blue A into polyurethane foam matrix. This foam material was found to be very suitable for the extraction of metal ions from aqueous solutions. The characterization of Nile blue A grafted foam and the effect of halide concentration, pH, shaking time, extraction isotherm and capacity have been investigated. This foam material was found to be suitable for the separation and preconcentration of iron (III), zinc (II), cadmium (II) and mercury (II) from waste water. The extraction was accomplished in (15-20) minutes. Iron was separated from acid medium (2-4 M HCl), zinc from (3-5 M HCl), cadmium from (4-6 M HCl) as thiocyanate complexes and mercury was separated from (1-2 M HCl) as chloride.     

Metal exchange reactions in cadmium complexes with porphyrins of various structures

The reaction kinetics of the metal exchange Cd(II)-Cu(II) and Cd(II)-Zn(II) in the cadmium complexes (CdP) with porphyrin ligands (H₂P) differing by degree of stiffness (tetraphenylporphin, N-methyltetraphenylporphin, and tetraphenyltetrabenzoporphin) in the DMSO medium, was studied using spectrophotometric method. The rate of metal exchange reaction depends on the nature of the non-planatrity of H₂P in the structure of CdP complexes, as well as on the additional screening of the reaction center MN₄ by the extra-ligands and substituents. The reduction of the coordinating ability of the anion X⁻ in the structure of the solvate-salt of incoming metal M’X₂(Solv) _n−2 in a series: acetylacetonate > acetate > chloride > nitrate favors the metal exchange. In the most studied cases the reaction of CdP proceeds along a combined associative-dissociative mechanism. The order of the metal exchange reaction is found to be depending on temperature indicating a change in the contributions of associative and combined routes. The “pure” associative reaction mechanism in a medium of DMSO was for the first time found for the labile complex CdTPTBP with the saddle-type nonplanar ligand.     

Cover Picture: Coordination Algorithms Control Molecular Architecture: [CuI4(L2)4]4+ Grid Complex Versus [MII2(L2)2X4]y+ Side‐By‐Side Complexes (M=Mn,Co, Ni,Zn; X=Solvent or Anion) and [FeII(L2)3][Cl3FeIIIOFeIIICl3] (Chem. Eur. J. 16/2003)

The cover picture shows how differing coordination algorithms control the molecular architecture of complexes of the pyridazine‐containing, two‐armed, acyclic Schiff base ligand L2 (left, prepared from one equivalent of 3,6‐diformylpyridazine and two equivalents of d‐anisidine). Two very different complexes of L2 self‐assemble from tetrahedral copper(I ) versus octahedral zinc(II ), nickel(II ), and cobalt(II ) controlled 1 : 1 reactions with L2. In both cases the metal ions are bridged by the pyridazine moieties in L2, but in the case of the tetrahedral copper(II ) the result is a tetrametallic [2×2] grid complex ([Cu^I₄(L2)⁴]⁴⁺: top right), whilst in the case of the octahedral metal(II ) ions dimetallic side‐by‐side complexes, [M^II₂(L2)²(X)₄]^y+ (M = Mn, Co, Ni, Zn; X = solvent or anion), are formed (bottom right). The cover image was kindly generated by M. Crawford (University of Otago) with Strata Studio Pro (Strata). More details are given by S. Brooker and co‐workers on p. 3772 ff.     

Thermodynamic characteristics of the formation of Cd2+ ion-L-serine complexes in aqueous KNO3 solutions at 288–308 K

The heats of formation of complexes of L-serine and doubly charged cadmium ions are determined by calorimetry. The heat effects of the reaction between an amino acid solution and a cadmium(II) solution and the respective heats of dilution of cadmium nitrate solution are measured at temperatures of 288.15, 298.15, and 308.15 K and ionic strengths of 0.25, 0.50, and 0.75 against the background of KNO₃. The standard thermodynamic characteristics of complexation are calculated. Standard enthalpies of formation of mono-, bis-, and tris-coordinated complexes of cadmium(II) in an aqueous solution are found.     

Coordination Features of a Polyaza-Bipyridine-Macrocyclic Ligand toward Co(II) and Cd(II) in Water and Dimethylsulfoxide

The coordination features of a polyaza macrocycle, containing the diverse bipyridine unit 4,4′-(2,5,6,11,14-pentaaza[15]-[15](2,2′)-bipyridylophane (L3), with Co(II) and Cd(II) have been studied in aqueous solution and in the aprotic solvent dimethylsulfoxide (DMSO). The study was carried out at 298 K by means of potentiometric, spectrophotometric and calorimetric techniques. The formation of the dinuclear species M₂ L3 is observed for Co(II) both in water and in DMSO, whereas Cd(II) is able to form this type of dinuclear complex only in DMSO. The FT-IR spectra of the mononuclear species ML3, formed in both solvents, provide evidence that the rigid structure of the polyaminic chain prevents metal ions from being coordinated by all of the nitrogens of the macrocyclic cavity, in good agreement with the behavior suggested by the thermodynamic parameters. The results are compared with those for the complexation of Co(II) and Cd(II) with similar polyazamacrocycles containing a bipyridine unit directly inside the cavity. Semi-empirical calculations were also performed to obtain structural information.     

Extractive separation of trace amounts of mercury, cadmium and zinc

A simple solvent extraction procedure is reported for the sequential separation of mercury(II), cadmium(II) and zinc(II). Mercury is separated first using 1,3-diphenyl-2-thiourea in chloroform at an overall acidity of 0.3M HCl. Then cadmium separated using the same reagent at pH 10 into dichloromethane. The zinc which is remaining in the aqueous phase is then quantitatively extracted into toluene-cyclohexanol mixture using 2-mercaptobenzoxazole. Suitable stripping solutions have been proposed for the re-extraction of these metal ions for their subsequent estimations. The method has been made highly selective by the use of appropriate masking agents and has been applied in conjunction with estimation procedures for the determination of these metal ions in city waste incineration ash (CRM 176), mercuric chloride (A. R. grade) and in magnesium alloy samples.     

Room temperature ionic liquid as a novel medium for liquid/liquid extraction of metal ions

Room temperature ionic liquids (RTILs) have been used as novel solvents to replace traditional volatile organic solvents in organic synthesis, solvent extraction, and electrochemistry. The hydrophobic character and water immiscibility of certain ionic liquids allow their use in solvent extraction of hydrophobic compounds. In this work, a typical room temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate [C₄mim][PF₆], was used as an alternative solvent to study liquid/liquid extraction of heavy metal ions. Dithizone was employed as a metal chelator to form neutral metal-dithizone complexes with heavy metal ions to extract metal ions from aqueous solution into [C₄mim][PF₆]. This extraction is possible due to the high distribution ratios of the metal complexes between [C₄mim][PF₆] and aqueous phase. Since the distribution ratios of metal dithiozonates between [C₄mim][PF₆] and aqueous phase are strongly pH dependent, the extraction efficiencies of metal complexes can be manipulated by tailoring the pH value of the extraction system. Hence, the extraction, separation, and preconcentraction of heavy metal ions with the biphasic system of [C₄mim][PF₆] and aqueous phase can be achieved by controlling the pH value of the extraction system. Preliminary results indicate that the use of [C₄mim][PF₆] as an alternate solvent to replace traditional organic solvents in liquid/liquid extraction of heavy metal ions is very promising.     

Paper Chromatographic Separation of DMSO Complexes of Metal Ions

Abstract

R_f, values of DMSO complexes of some metal ions in twelve solvent systems are given. The separation of Zn and Hg DMSO complexes from others have been achieved in Water and in n-butyl alcohol respectively by using paper chromatography. Some other possible separations are also reported.     

Stability constants of complexes of N-arylhydroxamic acids with some bivalent metal ions

Thermodynamic stability constants of complexes of Mn(II), Ni(II), Zn(II) and Cu(II) with five closely related N-arylhydroxamic acids have been determined at 25 +/- 0.1 degrees in 50% v v aqueous dioxan medium. The stabilities of the complexes mostly follow the order of the basicity of the ligands and the electron affinities of the metal ions as measured by their second ionization potential.