共轴双脉冲激光诱导击穿光谱和最小二乘支持向量机法定量分析植物油中铬

利用共轴双脉冲激光诱导击穿光谱( DP-LIBS)技术对植物油(大豆油、花生油和玉米油)中的重金属铬( Cr)含量进行定量分析。采用Ava-Spec双通道高精度光谱仪采集样品的LIBS光谱,然后通过其LIBS谱线图确定了CN分子谱线(421.49 nm)、Ca原子谱线(422.64 nm)及Cr的3条原子谱线(425.39、427.43和428.87 nm),根据上述谱线建立了Cr元素的单变量定标模型和最小二乘支持向量机(LS-SVM)校正模型,并用验证样品对它们进行检验。研究结果表明,对于单变量定标法,大豆油、花生油及玉米油验证样品的平均预测相对误差(PRE)分别为12.57%,12.11%和13.72%;对于三变量LS-SVM法,其定标样品真实值与预测值之间的拟合度 R2分别为0.9785,0.9792和0.9654,验证样品的平均 PRE 分别为8.92%,8.33%和10.98%;对于五变量LS-SVM法(增加两基体元素谱线变量),其定标样品真实值与预测值之间的拟合度R2分别为0.9895,0.9901和0.9855,验证样品的平均PRE分别为7.46%,8.96%和8.95%。由此可知,LS-SVM校正模型性能优于单变量定标法,且五变量LS-SVM校正模型性能优于三变量LS-SVM校正模型;采用LS-SVM法及引入合适的基体元素谱线( CN、Ca)能有效减小定量分析误差,提高LIBS技术对植物油中Cr含量预测的精度。     

水平衰减全反射傅里叶变换红外光谱法结合化学计量学鉴别问荆与节节草

采用水平衰减全反射傅里叶变换红外光谱法(HATR-FT-IR)测定中药问荆和同科植物节节草的FT-IR谱,运用连续小波变换(CWT)多分辨率分析法对吸收较为相似的问荆及节节草的FT-IR进行特征提取.选择第8、9、10分解层数下的特征值作为分析的基础,采用FT-IR-CWT-SVM法建立了问荆和节节草识别的模型.通过学习训练,对120个预测样品的识别准确率为90%以上.当采用径向基函数作为核函数时,识别准确率达100%.样品的FT-IR经小波特征提取后的特征值有所差异,采用SVM进行识别可以很好地把两者分类.通过对样品的FT-IR小波变换后所得特征值进行SVM的分类,能够有效地进行区别鉴定形态较为相似的同科植物问荆及节节草.     

Spectrophotometric determination of ternary mixtures of thiamin, riboflavin and pyridoxal in pharmaceutical and human plasma by least-squares support vector machines.

Ternary mixtures of thiamin, riboflavin and pyridoxal have been simultaneously determined in synthetic and real samples by applications of spectrophotometric and least-squares support vector machines. The calibration graphs were linear in the ranges of 1.0 - 20.0, 1.0 - 10.0 and 1.0 - 20.0 microg ml(-1) with detection limits of 0.6, 0.5 and 0.7 microg ml(-1) for thiamin, riboflavin and pyridoxal, respectively. The experimental calibration matrix was designed with 21 mixtures of these chemicals. The concentrations were varied between calibration graph concentrations of vitamins. The simultaneous determination of these vitamin mixtures by using spectrophotometric methods is a difficult problem, due to spectral interferences. The partial least squares (PLS) modeling and least-squares support vector machines were used for the multivariate calibration of the spectrophotometric data. An excellent model was built using LS-SVM, with low prediction errors and superior performance in relation to PLS. The root mean square errors of prediction (RMSEP) for thiamin, riboflavin and pyridoxal with PLS and LS-SVM were 0.6926, 0.3755, 0.4322 and 0.0421, 0.0318, 0.0457, respectively. The proposed method was satisfactorily applied to the rapid simultaneous determination of thiamin, riboflavin and pyridoxal in commercial pharmaceutical preparations and human plasma samples.     

Variable-weighted least-squares support vector machine for multivariate spectral analysis

Multivariate spectral analysis has been widely applied in chemistry and other fields. Spectral data consisting of measurements at hundreds and even thousands of analytical channels can now be obtained in a few seconds. It is widely accepted that before a multivariate regression model is built, a well-performed variable selection can be helpful to improve the predictive ability of the model. In this paper, the concept of traditional wavelength variable selection has been extended and the idea of variable weighting is incorporated into least-squares support vector machine (LS-SVM). A recently proposed global optimization method, particle swarm optimization (PSO) algorithm is used to search for the weights of variables and the hyper-parameters involved in LS-SVM optimizing the training of a calibration set and the prediction of an independent validation set. All the computation process of this method is automatic. Two real data sets are investigated and the results are compared those of PLS, uninformative variable elimination-PLS (UVE-PLS) and LS-SVM models to demonstrate the advantages of the proposed method.     

Least-squares support vector machines and near infrared spectroscopy for quantification of common adulterants in powdered milk

This paper proposes the use of the least-squares support vector machine (LS-SVM) as an alternative multivariate calibration method for the simultaneous quantification of some common adulterants (starch, whey or sucrose) found in powdered milk samples, using near-infrared spectroscopy with direct measurements by diffuse reflectance. Due to the spectral differences of the three adulterants a nonlinear behavior is present when all groups of adulterants are in the same data set, making the use of linear methods such as partial least squares regression (PLSR) difficult. Excellent models were built using LS-SVM, with low prediction errors and superior performance in relation to PLSR. These results show it possible to built robust models to quantify some common adulterants in powdered milk using near-infrared spectroscopy and LS-SVM as a nonlinear multivariate calibration procedure.     

Prediction of wood property in Chinese Fir based on visible/near-infrared spectroscopy and least square-support vector machine

A method for the quantification of density of Chinese Fir samples based on visible/near-infrared (vis–NIR) spectrometry and least squares-support vector machine (LS-SVM) was proposed. Sample set partitioning based on joint x–y distances (SPXY) algorithm was used for dividing calibration and prediction samples, it is of value for prediction of property involving complex matrices. A stepwise procedure is employed to select samples according to their differences in both x (instrumental responses) and y (predicted parameter) spaces. For comparison, the models were also constructed by Kennard–Stone method, as well as by using the duplex and random sampling methods for subset partitioning. The results revealed that the SPXY algorithm may be an advantageous alternative to the other three strategies. To validate the reliability of LS-SVM, comparisons were made among other modeling methods such as support vector machine (SVM) and partial least squares (PLS) regression. Satisfactory models were built using LS-SVM, with lower prediction errors and superior performance in relation to SVM and PLS. These results showed possibility of building robust models to quantify the density of Chinese Fir using near-infrared spectroscopy and LS-SVM combined SPXY algorithm as a nonlinear multivariate calibration procedure.     

Quantification of <Emphasis Type="Italic">Lactobacillus</Emphasis> in fermented milk by multivariate image analysis with least-squares support-vector machines

This paper reports an approach for quantification of Lactobacillus in fermented milk, grown in a selective medium (MRS agar), by use of digital colour images of Petri plates easily obtained by use of a flatbed scanner. A one-dimensional data vector was formed to characterize each digital image on the basis of the frequency-distribution curves of the red (R), green (G), and blue (B) colour values, and quantities derived from them, for example lightness (L), relative red (RR), relative green (RG), and relative blue (RB). The frequency distributions of hue, saturation, and intensity (HSI) were also calculated and included in the data vector used to describe each image. Multivariate non-linear modelling using the least-squares support vector machine (LS-SVM) and a linear model based on PLS regression were developed to relate the microbiological count and the frequency vector. Feasibly models were developed using the LS-SVM and errors were below than 10% for Lactobacillus quantification, indicating the proposed approach can be used for automatic counting of colonies.     

Determination of biodiesel purity through feature mapping to the multi-dimensional space by the LS-SVM approach

Purity is one of the essential properties of biodiesel. Since the purity parameter depends on different operating conditions, its direct measurement is too hard and can only be obtained for specific ranges of conditions. Therefore, this work considers the least-squares support vector machines (LS-SVMs) that transform operating conditions to a multi-dimensional space to simulate biodiesel purity in wide ranges of operating conditions. Indeed, we develop a reliable LS-SVM approach for modeling the biodiesel purity as a function of catalyst type and its concentration, reaction time, temperature, methanol-to-oil volume ratio, frequency, and amplitude of ultrasonic waves. The designed LS-SVM’s predictive performance is compared with four available artificial intelligence (AI) techniques in reliable literature. The obtained results confirm that the LS-SVM paradigm outperforms other considered AI-based techniques regarding five different statistical criteria. Our LS-SVM model provides AARD?=?2.2%, RMSE?=?3.46, and R²?=?0.9868 for the prediction of 267 experimental data points, which includes 267 data points. This model is finally employed for investigating the effect of different influential variables on biodiesel purity.

     

近红外光谱法在红曲菌固态发酵过程参数检测中的应用

研究了近红外光谱技术快速检测红曲菌固态发酵过程参数水分含量和pH值的可行性。针对传统基于间隔策略波长选择方法忽略非线性因素的缺点,采用一种基于最小二乘支持向量机(Least squares support vector machines,LS-SVM)非线性模型的波长筛选算法：联合区间最小二乘支持向量机(Synergy interval least squares support vector machines,siLS-SVM),并将新算法与相关系数法、iPLS算法、siPLS算法对比。实验结果显示,联合siLS-SVM算法和LS-SVM模型取得了最好的预测效果,水分含量、pH值的预测集相关系数(Rp)分别为0.962 1、0.976 1,预测均方根误差(RMSEP)分别为0.012 9、0.145 2,表明模型具有较好的拟合度和预测性能。应用近红外光谱法进行红曲菌固态发酵过程的水分含量和pH值的快速检测可行,该方法为进一步实现其过程参数的在线检测及发酵条件优化提供了技术基础。     

Discrimination of Rhizoma Corydalis from two sources by near-infrared spectroscopy supported by the wavelet transform and least-squares support vector machine methods

Near-infrared spectroscopy (NIRS) was applied for direct and rapid collection of characteristic spectra from Rhizoma Corydalis, a common traditional Chinese medicine (TCM), with the aim of developing a method for the classification of such substances according to their geographical origin. The powdered form of the TCM was collected from two such different sources, and their NIR spectra were pretreated by the wavelet transform (WT) method. A training set of such Rhizoma Corydalis spectral objects was modeled with the use of the least-squares support vector machines (LS-SVM), radial basis function artificial neural networks (RBF-ANN), partial least-squares discriminant analysis (PLS-DA) and K-nearest neighbors (KNN) methods. All the four chemometrics models performed reasonably on the basis of spectral recognition and prediction criteria, and the LS-SVM method performed best with over 95% success on both criteria. Generally, there are no statistically significant differences in all these four methods. Thus, the NIR spectroscopic method supported by all the four chemometrics models, especially the LS-SVM, are recommended for application to classify TCM, Rhizoma Corydalis, samples according to their geographical origin.     

基于支持向量机的汽油族组成近红外光谱分析方法研究

提出一种基于最小二乘支持向量机(LS-SVM)的汽油族组成近红外光谱分析方法。采用国家标准方法(GB 11132-1989液体石油产品烃类测定法——荧光指示剂吸附法)测定了重庆地区销售的汽油族组成,并采用主成分分析-最小二乘支持向量机建立汽油族组成的预测模型。预测模型对汽油中芳烃和烯烃含量的RMSEC分别为0.2090和0.2142。实验结果表明所建模型具有计算量小,预测准确、可靠,而且操作简单、维护费及测试费用低等特点。     

最小二乘支持向量机算法与紫外光谱法用于鉴别清开灵注射液四混中间体

采用一阶导数数据预处理,最小二乘支持向量机(LS-SVM)紫外可见光谱建模,对清开灵注射液四混中间体进行质量评价。以二次网格法和十折交叉验证法优化建模参数,预测集的总正确率和接受器工作特性曲线(ROC)下面积分别可达98.0%和0.983。结果表明,与经典的支持向量机相比,LSSVM鉴别准确率更高,模型的泛化能力更强。可用于清开灵注射液生产过程中质量控制,为中药注射液生产过程的质量控制提供了一条有效的途径。     

基于粒子群算法的最小二乘支持向量机在红花提取液近红外定量分析中的应用

提出一种基于粒子群算法的最小二乘支持向量机(PSO-LS-SVM)方法,用于建立红花提取过程关键质控指标的定量分析模型.近红外光谱数据经波段选择、预处理和主成分分析(降维)后,利用粒子群优化(PSO)算法对最小二乘支持向量机算法中的参数进行优化,然后使用最优参数建立固含量和羟基红花黄色素A(HSYA)浓度的定量校正模型.将校正结果与偏最小二乘法回归(PLSR)和BP神经网络(BP-ANN)比较,并将所建的3个模型用于红花提取过程未知样本的预测.结果表明,BP-ANN校正结果优于PSO-LS-SVM和PLSR,但是对验证集和未知样品集的预测能力较差,而PSO-LS-SVM和PLSR模型的校正、验证结果相近,相关系数均大于0.987,RMSEC和RMSEP值相近且小于0.074,RPD值均大于6.26,RSEP均小于5.70％.对于未知样品集,pSO-LS-SVM模型的RPD值大于8.06,RMSEP和RSEP值分别小于0.07％和5.84％,较BP-ANN和PLSR模型更低.本研究所建立的PSO-LS-SVM模型表现出较好的模型稳定性和预测精度,具有一定的实践意义和应用价值,可推广用于红花提取过程的近红外光谱定量分析.     

基于近红外光谱的食用植物油中反式脂肪酸含量快速定量检测及模型优化研究

利用近红外光谱技术对食用植物油中反式脂肪酸(Trans fatty acids,TFA)含量进行快速定量检测,并通过波段选择、预处理方法、变量筛选及建模方法对TFA含量预测模型进行优化.采用AntarisⅡ傅里叶变换近红外光谱仪在4000~10000 cm-1光谱范围采集98个食用植物油样本的近红外透射光谱,然后采用气相色谱法测定TFA的真实含量.首先,对样本原始光谱进行波段、预处理方法优选;在此基础上,采用竞争自适应重加权法(Competitive adaptive reweighted sampling,CARS)筛选TFA相关的重要变量,最后应用主成分回归、偏最小二乘和最小二乘支持向量机方法分别建立食用植物油中TFA含量的预测模型.研究结果表明,近红外光谱技术检测食用植物油中的TFA含量是可行的,优化后的最佳预测模型的校正集和预测集R2分别为0.992和0.989,RMSEC和RMSEP分别为0.071%和0.075%.最佳预测模型所用的变量仅26个,占全波段变量的0.854%.此外,与全波段偏最小二乘预测模型相比,其预测集R2由0.904上升为0.989,RMSEP由0.230%下降为0.075%.由此表明,模型优化非常必要,CARS能有效筛选TFA相关的重要变量,极大减少建模变量数,从而简化预测模型,并较大提高预测模型的精度和稳定性.     

Determination of acetolactate synthase activity and protein content of oilseed rape (Brassica napus L.) leaves using visible/near-infrared spectroscopy

A new acetolactate synthase (ALS)-inhibiting herbicide, propyl 4-(2-(4,6-dimethoxypyrimidin-2-yloxy)benzylamino)benzoate (ZJ0273), was applied to oilseed rape (Brassica napus L.) leaves in different leaf positions. Visible/near-infrared (Vis/NIR) spectroscopy was investigated for fast and non-destructive determination of ALS activity and protein content in rapeseed leaves. Partial least squares (PLS) analysis was the calibration method with comparison of different spectral preprocessing by Savitzky-Golay (SG) smoothing, standard normal variate (SNV), first and second derivative. The best PLS models were obtained by first-derivative spectra for ALS, whereas original spectra for soluble, non-soluble and total protein contents. Simultaneously, certain latent variables (LVs) were used as the inputs of back-propagation neural network (BPNN) and least squares-support vector machine (LS-SVM) models. All LS-SVM models outperformed PLS models and BPNN models. The correlation coefficient (r), root mean square error of prediction (RMSEP) and bias in validation set by LS-SVM were 0.998, 0.715 and 0.079 for ALS, 0.999, 33.084 and 1.178 for soluble protein, 0.997, 42.773 and 6.244 for non-soluble protein, 0.999, 59.562 and 7.437 for total protein, respectively. The results indicated that Vis/NIR spectroscopy combined with LS-SVM could be successfully applied for the determination of ALS activity and protein content of rapeseed leaves. The results would be helpful for further on field analysis of using Vis/NIR spectroscopy to monitor the growing status and physiological properties of oilseed rape.     

基于最小二乘支持向量机的色谱指纹图谱预测银杏叶总抗氧化活性

在色谱图基线校正和色谱峰匹配基础上,提出以40个银杏叶提取物HPLC指纹图谱的色谱图轮廓作为输入,相应的提取物总抗氧化活性作为输出,建立最小二乘支持向量机回归模型,并对包含10个样本的测试集进行了预测.最小二乘支持向量机的测试集预测误差均方根(RMSEP)为0.0230,预测结果优于目前普遍使用的误差反向传播神经网络和偏最小二乘回归.与采用色谱峰面积为分析变量的模型预测结果比较表明:采用消除干扰后的色谱图全谱轮廓保留了样本的全部信息,预测结果更好