Pump-to-Stokes RIN transfer in Raman fiber lasers and its impact on the performance of co-pumped Raman amplifiers

We show experimentally and numerically that pump-to-Stokes transfer of relative intensity noise (RIN) makes a significant contribution to the output RIN of Raman fiber lasers (RFLs). We theoretically investigate the penalty in the signal-quality factor induced by a noisy RFL pump in a co-pumped Raman-amplified transmission span, where the noise on the RFL output is caused by pump-to-Stokes transfer of RIN. This penalty can be kept low by a proper design of the RFL, in particular by using high-reflectivity output couplers, high-gain Raman fibers and optimizing the RFL fiber length.     

Suppression of pump-to-Stokes relative intensity noise transfer in Raman fiber laser by injection of modulated signal

A feasible approach is theoretically demonstrated that suppresses the relative intensity noise (RIN) transfer from pump sources to the proposed Raman fiber laser (RFL) output at the first-order Stokes line. The technique is accomplished by injecting a modulated signal at second-order Stokes shift from the pump wavelength according to the monitored RFL output, which indirectly consumes the pump power fluctuations and results in suppression of the RIN transfer to the RFL output. With the RFL used as a pump source for co-pumped Raman fiber amplifiers, further calculation results show that the Q-factor penalty due to RIN transfer can be dramatically reduced.     

输出功率稳定的二级喇曼光纤激光器特性

提出一种输出功率稳定的二级喇曼光纤激光器,从理论分析角度探讨了它的特性.结果表明：由于在抽运光的二级斯托克斯光频附近的自发辐射光的钳制作用,激光器的一级和二级输出功率几乎都不受抽运功率波动的影响,从而降低了抽运光低频相对强度噪音转移|激光器输出的一级和二级斯托克斯光功率都很稳定,并且通过调节激光器结构中的可变衰减器,可以有效控制一级、二级激光的输出功率以及它们的比值.这些特性表明该喇曼光纤激光器很适合于作为喇曼光纤放大器的抽运源.     

Versatile Raman fiber laser for sodium laser guide star

Robust high‐power narrow‐linewidth lasers at 589 nm are required for sodium laser guide star adaptive optics in astronomy. A high‐power 589 nm laser based on Raman fiber amplifier is reported here, which works in both continuous‐wave and pulsed formats. In the continuous‐wave case, the laser produces more than 50 W output. In the pulsed case, the same laser produces square‐shaped pulses with tunable repetition rate (500 Hz to 10 kHz) and duration (1 ms to 30 μs). The peak power is as high as 84 W and remains constant during the tuning. The laser also emits an adjustable sideband at 1.71 GHz away from the main laser frequency for better sodium excitation. The versatility of the laser offers much flexibility in laser guide star application.     

Optimization of a Raman/EDFA hybrid amplifier based on dual-order stimulated Raman scattering using a single-pump

Based on dual-order stimulated Raman scattering (SRS) of a single 1395 nm Raman fiber laser in 75 km single mode fiber and its corresponding dispersion compensation module, a hybrid Raman/Erbium doped fiber amplifier (EDFA) for long wavelength band (L-band) amplification is realized by inserting a segment of EDF within the span. By comparing the performance of gain and noise in four hybrid amplifiers with different span configurations, we find that the distribution of the secondary L-band amplification obtained from the EDF along the link has a great influence on the performance of the hybrid amplifier. Both gain and noise performance of hybrid amplifier can be improved significantly by optimizing the location of the EDF. Moreover, we can extend the flat gain bandwidth from L-band to central wavelength band (C-band) plus L-band by recycling the residual first-order SRS to pump a segment of EDF with proper length.     

Theoretical analysis and heat dissipation of mid-infrared chalcogenide fiber Raman laser

Based on the structure of mid-infrared chalcogenide fiber Raman laser, the nonlinear coupled equations and heat dissipation equations are constructed. The effects of laser parameters including pump power, fiber length, reflectance of output coupler and fiber loss coefficient on laser performance are numerically analyzed. The results show that the Raman laser pumped at 2 μm can operate at high slope efficiency using the optimized structure parameters. In addition, the output laser power decreases dramatically with the increasing of fiber loss coefficient. Moreover, the temperature distributions along the fiber radial and axial directions and the maximum temperature versus launched pump power are calculated according to the heat dissipation equations. The results show that the maximum temperature in the fiber increases dramatically with the increasing launched pump power, which is above 300 °C for launched pump power of 21 W. The above obtained results can be used for theoretical guiding and optimizing design of practical chalcogenide fiber Raman laser.     

基于高非线性光纤的增益谱平坦拉曼光纤放大器研究

针对光纤通信中密集波分复用系统各信道的在线平坦光放大这一光通信问题,提出利用级联高非线性光纤来设计增益平坦的拉曼光纤放大器。对高非线性光纤(As S光纤)拉曼增益谱前后沿进行线性拟合处理,利用不同波长泵浦抽运同种光纤,实现前放大后增益补偿,并考虑信号光损耗不同,在输出端得到了一个近似固定的功率输出值,并分析了影响拉曼光纤放大器输出特性的因素。模拟结果表明:平均增益为20.45 dB,增益平坦度为0.15 dB。     

高重复频率短脉冲全光纤激光系统

采用时分复用技术在输出80 MHz重复频率光纤锁模激光器的基础上,实现了重复频率倍增,获得了160 MHz的高重复频率输出。理论和实验研究了高重复频率短脉冲在大模面积掺Yb3+光纤中的放大特性,实验上获得了输出平均功率105 W,脉冲宽度12.4 ps,重复频率160 MHz的高重复频率短脉冲光纤激光系统。     

Evolution of modes in double-clad Raman fiber amplifier

Stimulated Raman scattering in a double cladding optical fiber is studied with a continuous wave laser used as a pump source. Under various launch conditions, pump modes are differently excited. Considering the mode coupling effect among the pump modes, the evolution of the power in the Stokes modes is studied. The results show that the scattered waves （the Stokes waves） in the fiber core with 9%tm diameter and 0.14 NA could propagate predominantly in the fundamental mode of the fiber by carefully adjusting the pump light launching conditions.     

高重复频率短脉冲全光纤激光系统

采用时分复用技术在输出80MHz重复频率光纤锁模激光器的基础上,实现了重复频率倍增,获得了160MHz的高重复频率输出。理论和实验研究了高重复频率短脉冲在大模面积掺Yb3+光纤中的放大特性,实验上获得了输出平均功率105W,脉冲宽度12.4ps,重复频率160MHz的高重复频率短脉冲光纤激光系统。     

双纵模窄线宽光纤拉曼放大器

 报道了一台实现了双纵模窄线宽激光输出的光纤拉曼放大器。利用中心波长1 079.7 nm的双纵模窄线宽种子激光器获得了频率间隔1.4 GHz、功率比约3∶1的双纵模输出,各纵模的线宽约为10 MHz;再利用1 031 nm泵浦光对双纵模种子光进行拉曼放大,实现了1.07 W双纵模激光输出。拉曼放大过程中,两个纵模的线宽、频率间隔及功率比保持得很好。     

Gain and gain-flatness improved photonic crystal fiber Raman amplifier based on a dual-pass amplification configuration with single pump laser

A gain and gain-flatness improved L-band dual-pass Raman fiber amplifier (RFA) utilizing a photonic crystal fiber (PCF) as gain medium is demonstrated. By introducing complementary gain spectra of typical forward and backward pumping single-pass RFA using the same PCF, we finally achieve average net gain level of 22.5 dB with a ±0.8 dB flattening gain in 20-nm bandwidth from 1595 nm to 1615 nm, which is rare in RFAs with only one single pump and no flattening filter. Compared with the single-pass pump configurations, gain level, flatness and bandwidth are greatly improved by using the dual-pass amplification configuration. The limitation of this configuration caused by multi-path interference (MPI) noise and stimulated Brillouin scattering (SBS) is also discussed.     

Secure key distribution over a 500 km long link using a Raman ultra‐long fiber laser

In traditional communication systems the transmission medium is considered as a given characteristic of the channel, which does not depend on the properties of the transmitter and the receiver. Recent experimental demonstrations of the feasibility of extending the laser cavity over the whole communication link connecting the two parties, forming an ultra‐long fiber laser (UFL), have raised groundbreaking possibilities in communication and particularly in secure communications. Here, a 500 km long secure key distribution link based on Raman gain UFL is demonstrated. An error‐free distribution of a random key with an average rate of 100 bps between the users is demonstrated and the key is shown to be unrecoverable to an eavesdropper employing either time or frequency domain passive attacks.     

单频光纤拉曼放大器的实验研究

本文进行了1031 nm抽运光对1080 nm单频信号光的拉曼放大实验,详细研究了单频信号光种子功率、拉曼增益光纤长度、抽运方式等因素对 单频光纤拉曼放大器(SF-FRA)输出特性的影响.结果表明,在未受受激布里渊散射(SBS)因素限制时,相同抽运功率条件下,单频信号光种子功率越高,SF-FRA的效率越高;拉曼增益光纤越长,SF-FRA的效率越高;前向抽运时,SF-FRA的效率较高.实验中发现SF-FRA的拉曼放大过程对单频信号光的线宽有较小的展宽.此外,单频信号光远场干涉短曝光图像的对比度为0.814,单频信号光与SF-FRA放大光远场干涉短曝光图像可见度为0.719,表明SF-FRA对单频信号光的相干性有一定影响.实验结论可为其他特殊波长SF-FRA的设计提供一定的参考.     

带光放大器的分布式光纤拉曼温度系统

 详细阐述了红外双波长带光放大器的分布式光纤拉曼温度系统原理,为了抑制放大器的自发辐射增长、温漂噪声积累、瑞利背向散射光窜扰反斯托克斯背向散射光,采用两条已知温度的曲线和最近测量温度曲线的解调方法,提高了系统的测温精度和稳定性并降低了系统的成本。实验结果与理论分析一致,系统的测温误差在±0.1 ℃内。     

在ITU波长上的多波长光纤激光器

实验演示了一种基于半导体光放大器的多波长光纤激光器,其输出波长在ITU的波长上。使用环形腔结构,应用光纤Fabry-Perot标准具来获得ITU波长间隔,同时获得了上百条激光谱线的输出,在60nm范围的功率波动小于5dBm。     

Multiwavelength fiber laser using S-band erbium-doped fiber amplifier and semiconductor optical amplifier

A multiwavelength fiber ring laser that is based on an S-band erbium-doped fiber amplifier (EDFA) and a semiconductor optical amplifier (SOA) is developed. An optical switch is used to switch the multiwavelength fiber laser between S-band and L-band. This fiber laser can stably lase seven wavelengths in the S-band or 28 wavelengths in the L-band. Additionally, the lasing wavelengths with a signal-to-noise ratio of over 33 dB and a wavelength spacing of 100 GHz are demonstrated experimentally. The average powers of the lasing wavelength in the S-band and the L-band are −7.53 and −12.15 dBm, respectively.     

High efficiency, dual-wavelength fibre Raman pump laser for U-band fibre Raman amplifiers

A dual-wavelength, continuous wave, high efficiency fibre Raman ring laser for pumping U-band (1625–1675 nm) fibre Raman amplifiers is demonstrated. Two fibre Bragg gratings were used as wavelength-selective elements resulting in lasing lines at 1529.7 and 1558.7 nm with respective maximum powers of 209.0 and 390.9 mW. A simple U-band Raman amplifier was constructed to test the dual-wavelength pump laser and on:off gain with a peak of 7.3 dB and a 3-dB bandwidth of 73 nm was obtained.     

用于光阴极的光纤激光研制实验

为获得高亮度低发射度的电子束,研制高重复频率高平均功率的光阴极驱动激光系统非常关键。利用光纤激光技术,设计了100 MHz和1.3 GHz的激光系统。激光系统为全光纤结构,采用了掺镱光子晶体光纤作为放大器增益介质。在初步验证实验中,红外激光输出27 W,倍频后绿光达到6 W。     

Noise performance analysis of bi-directionally pumped distributed fiber Raman amplifiers with consideration of fiber nonlinearity and its impact on EDFA output OSNR

Under small-signal assumption, equivalent noise figure normalized by fiber nonlinearities (NENF) of bi-directionally pumped distributed fiber Raman amplifiers (BiDFRA) is derived. Amplified spontaneous Raman scattering noise and double Rayleigh scattering noise are both included. The relation between NENF and Raman gain, forward Raman gain percentage is investigated under different polarization factor and Rayleigh scattering coefficient. It agrees well with numerical simulation results. Based on the analytical expression, the optical signal-to-nose ratio (OSNR) improvement of hybrid pre-BiDFRA/erbium-doped fiber amplifier (EDFA) compared with sole EDFA is studied. It is shown that there is an optimum Raman gain and forward Raman gain percentage to maximize the OSNR improvement. Finally, some guidelines on BiDFRA design are proposed.