Synergistic-radiation grafting: A novel modification technique for the preparation of biomaterials

Radiation grafting was performed using different vinylmonomers and solvents simultaneously to modify polyamide-6 substrates. With the new technique, immunadsorbents and media for affinity chromatography were developed for the separation of low density lipoproteins, IgG antibodies and biotin- antibodies. To increase the biocompatibility of polymers, a graft modification was applied which allowed a totally coherent endothelial cell seeding.     

A novel method for the fabrication of monodisperse hollow silica spheres

In this paper, we report a novel method for the fabrication of small monodisperse hollow silica spheres. In this approach, when silica shells were coated on polystyrene particles by the sol-gel method, the polystyrene cores were dissolved subsequently, even synchronously, in the same medium to form monodisperse hollow spheres. Neither additional dissolution nor a calcination process was needed to remove the polystyrene cores. Transmission electron microscopy, scanning electron microscopy, and porosity measurements were used to characterize the monodisperse hollow silica spheres.     

Simple and cheap microfluidic devices for the preparation of monodisperse emulsions

Droplet microfluidics, which can generate monodisperse droplets or bubbles in unlimited numbers, at high speed and with complex structures, have been extensively investigated in chemical and biological fields. However, most current methods for fabricating microfluidic devices, such as glass etching, soft lithography in polydimethylsiloxane (PDMS) or assembly of glass capillaries, are usually either expensive or complicated. Here we report the fabrication of simple and cheap microfluidic devices based on patterned coverslips and microscope glass slides. The advantages of our approach for fabricating microfluidic devices lie in a simple process, inexpensive processing equipment and economical laboratory supplies. The fabricated microfluidic devices feature a flexible design of microchannels, easy spatial patterning of surface wettability, and good chemical compatibility and optical properties. We demonstrate their utilities for generation of monodisperse single and double emulsions with highly controllable flexibility.     

Synthesis of novel cationic lipids for preparation of liposomes to be used in gene therapy of glioma

The synthesis of a series of cationic lipids for the preparation of liposomes to be used in gene therapy is described. The synthetic strategy is designed in few steps and affords good yields. To cite this article: A. Bianco et al., C. R. Chimie 6 (2003).     

A facile method for the preparation of monodisperse hollow silica spheres with controlled shell thickness

This article presents a facile, effective, mild synthesis process for well‐defined hollow spheres by using cationic polystyrene (PS) submicro‐particles as templates. In this approach, the cationic PS templates can be first prepared via emulsifier‐free polymerization by using the cationic monomer 2‐(methacryloyloxy) ethyltrimethylammonium chloride as comonomer, then, the silica shells from the sol‐gel process of tetraethoxysilane were coated on the surfaces of template particles via electrostatic interaction, finally the PS was dissolved in situ by modification of the reaction conditions in the same medium to form monodisperse hollow silica spheres with controlled shell thickness. Fourier transform‐infrared spectroscopy, thermogravimetric analysis, Brunauer‐Emmett‐Teller, transmission electron microscopy, and scanning electron microscope measurements were used to characterize these hollow silica spheres. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1332–1338, 2010     

A novel method for encapsulation of a liquid crystal in monodisperse micron-sized polymer particles

Liquid crystals (LCs) encapsulated in monodisperse micron-sized polymer particles were prepared to control the size and size distribution of LC droplets in polymer-dispersed LCs. The poly(methyl methacrylate) (PMMA) seed particles were swollen with the mixture of liquid crystal, monomers (methyl methacrylate and styrene) and initiator by using a diffusion-controlled swelling method. A single LC domain was produced by the phase separation between PMMA and LC through polymerization. The optical microscopy and scanning electron microscopy showed that the particles are highly monodisperse with core–shell structure. Moreover, monodisperse LC core domains were confirmed from polarized optical microscope observations. The final particle morphology was influenced by the cross-linking of the seed particle. When linear PMMA particles, which are not cross-linked, were used as a seed, the microcapsules were distorted after annealing for a few days; however, in the case of cross-linked PMMA particles, the core–shell structure was sustained stably after annealing. Received: 22 November 2000 Accepted: 12 March 2001     

A novel approach to produce monodisperse hollow pure silica spheres

In this work, we report an efficient method to produce pure hollow silica spheres (HSS) using phenyltrimethoxysilane (PTMS) compound. The production of HSS was carried out via hydrolysis of PTMS in the aqueous media and followed by a condensation reaction to form silica spheres with phenyl groups. The product was then calcined to remove phenyl groups and obtain pure silica spheres with >95% fine structure. The chemical nature of pure silica was confirmed by Fourier transforms infrared spectroscopy. The calcined HSS were stable beyond the temperature of 900 °C as confirmed by thermal gravimetric analysis (TGA). The calcined spheres preserved their spherical appearance and hollow core as shown by SEM and TEM micrographs. Interestingly, the average size of the spheres was reduced significantly after calcination from 760 to 510 nm, confirming further the removal of phenyl groups. The calcined HSS offered much higher surface area (A_s) when analysed by BET; A_s for calcined product was ～406 and mere ～4.8 m²/g for uncalcined HSS. Finally, drug release study of cisplatin/HSS showed over 45% of steady cumulative release for 72 h. The prepared HSS can be dispersed in water opening the possibility of many novel bio/non-bio applications.     

A novel system of self-reproducing giant vesicles

Novel self-reproducing giant vesicles, consisting of a vesicular amphiphile with an imine group in its hydrophobic chain, were constructed. This vesicular amphiphile, the product of a dehydrocondensation reaction between amphiphilic aldehyde and a lipophilic aniline derivative, could be prepared within the giant vesicles. When a protected form of the aldehyde precursor was added to a suspension of giant vesicles containing the lipophilic aniline precursor and a catalyst, dehydrocondensation between the two precursors took place inside the vesicles and produced the same amphiphile as the one which constitutes the original vesicle. The newly formed amphiphiles self-assembled in the inner water pool to form small vesicles, which were eventually extruded through the outer layer of the original vesicle to the bulk water. Accordingly, this kinetic system can be designated as a self-reproducing system of giant vesicles.     

Facile preparation of controllable size monodisperse anatase titania nanoparticles

Monodisperse anatase titania nanoparticles with controllable sizes (typically 10-300 nm) can be synthesized using an efficient and straightforward protocol via fine tuning of the ionic strength in the devised sol-gel methodology.     

A novel synthetic method for preparation of some folates

An improved method was developed for preparation of 5,6,7,8-tetrahydrofolic acid (THF) and calcium-5-methyltetrahydrofolate (5-MTHF-Ca) by reduction of folic acid using KBH₄ catalyzed by Pb(NO₃)₂. The yields of THF and 5-MTHF-Ca were 56.5 and 42.7 %, respectively. A convenient method for measurement of THF and 5-MTHF-Ca using liquid chromatography–mass spectrometry (LC–MS) was also established, enabling analysis of those folates within 10 min without application of gradient elution.     

Study of SPG membrane emulsification processes for the preparation of monodisperse core-shell microcapsules

Experimental investigations on the Shirasu-porous-glass (SPG)-membrane emulsification processes for preparing monodisperse core-shell microcapsules with porous membranes were carried out systematically. The results showed that, to get monodisperse oil-in-water (O/W) emulsions by SPG membrane emulsification, it was more important to choose an anionic surfactant than to consider hydrophile-lipophile balance (HLB) matching. Increasing the viscosity of either the disperse phase or the continuous phase or decreasing the solubility of the disperse phase in the continuous phase could improve both the monodispersity and the stability of emulsions. With increasing monomer concentration inside the disperse phase, the monodispersity of emulsions became slightly worse and the mean diameter of emulsions gradually became smaller. Monodisperse monomer-containing emulsions were obtained when the SPG membrane pore size was larger than 1.0 micro m, and from these emulsions satisfactory monodisperse core-shell microcapsules with a porous membrane were prepared. On the other hand, when the SPG membrane pore size was smaller than 1.0 mciro m, no monodisperse emulsions were obtained because of the formation and chokage of solid monomer crystals in the pores or at the end of the pores of the SPG membrane. This was due to the remarkable solvation and diffusion of the solvent in water. With increasing the emulsification time the average emulsion diameter generally decreased, and the monodispersity of the emulsions gradually became worse.     

Electroformation of giant liposomes from spin-coated films of lipids

This paper describes spin-coating of solutions of lipids and using the resulting thin films for electroformation of giant liposomes. Spin-coating made it possible to generate uniform films of lipids with controllable thickness over large surfaces (>25 cm(2)) of indium tin oxide. Establishing a range of thicknesses optimal for electroformation (25-50 nm), we demonstrate formation of giant liposomes from lipids (such as asolectin, phosphatidylserine, and phosphatidylglycerol) that do not readily form giant liposomes from traditional, droplet-derived films. We compared liposomes from a spin-coated film of lipids to liposomes formed from traditional droplet-derived films and found that spin-coated films produced larger (by factor of 2-5) and more abundant liposomes than droplet-derived films of lipids. Electroformation from spin-coated, homogenous lipid films of optimal thickness provided a reproducible way to obtain liposomes with diameters that are predominantly larger than 30 microm over the entire surface of formation.     

One-step preparation of highly monodisperse micron-size particles in organic solvents

In this communication, we report the first simple and fast one-step method for synthesizing highly monodisperse micron-size PMMA particles in organic media through dispersion polymerization in the presence of PHSA (a polyhydroxyl-stearic-acid graft PMMA copolymer) as a stabilizer. There are two significant advantages of our method over earlier methods. First, by optimizing the composition of a solvent mixture of hexane and dodecane, we were able to increase the concentration of monomer up to 50-56% and obtain unusually large (up to 10 mum in diameter) PMMA particles. Second, by strictly controlling the nucleation time, we were able to make PMMA particles with a low polydispersity of around 1%, much lower than has ever before been achieved for such large particles. We also report an unusual apparent metastable state in the nucleation stage.     

A novel microwave route for the preparation of ZrC-SiC composites

A novel microwave-assisted carbothermal reduction and carburization route has been used to prepare ZrC-SiC composite powders. Both zircon and mixtures of ZrO₂ and SiO₂ were used as starting materials along with amorphous carbon. Carbothermal reduction and carburization were examined in both argon and nitrogen atmospheres. Reaction kinetics in microwave field was found to exhibit notable differences for the two different starting materials. However, a complete oxide to carbide conversion was achieved in less than 30 min in both cases when argon was used as an ambient gas. The possible structural mechanism involved in the reactions has been discussed.     

A novel one-step chemical method for preparation of copper nanofluids

This paper presents a novel one-step method for preparing of copper nanofluids by reducing CuSO(4).5H(2)O with NaH(2)PO(2).H(2)O in ethylene glycol under microwave irradiation. Nonagglomerated and stably suspended Cu nanofluids are obtained. The influences of CuSO(4) concentration, addition of NaH(2)PO(2), and microwave irradiation on the reaction rate and the properties of Cu nanofluids were investigated by transmission electron microscopy, infrared analysis, and sedimentation measurements. It is found to be a fast, efficient one-step chemical method to prepare Cu nanofluids.     

A novel method for preparation of imidazolium tetrafluoroborate ionic liquids

A new method for the preparation of substituted imidazolium tetrafluoroborate salt, some of which are known as versatile room temperature ionic liquids, is proposed. The new method based on N-methylation of imidazole provided tetrafluoroborate derivatives containing no counterions, with shorter time and lower cost than conventional ion-exchange method.