Liquid crystalline side chain polymer with a poly (Geraniol-co-MMA) backbone and phenylbenzoate mesogenic group: synthesis and characterization

A new side chain liquid crystalline polymers have been synthesized and characterized in which [geraniol-co-MMA] polymer are used as a backbone linked via polymethylene spacer to phenyl benzoate mesogenic group. The polymer exhibits enantiotropic liquid crystallinity with nematic phase and does not exhibit side chain crystallization .A clear difference between the nature of the mesophase is evidenced between [Geraniol-co-MMA] main chain and methacrylate polymers .The LC polymer exhibit glass transition at 40 °C. In a comparative analysis, we discuss the relevance of polymer backbone in the synthesis of side chain liquid crystalline polymers.     

Liquid-crystalline side chain polymers by chemical modification of poly(chloroalkylvinylether)s

The synthesis of polyalkylvinylethers with pendant 4-cyano-4'-oxybiphenyl groups gives thermotropic liquid-crystalline polymers. The new method developed here consists of the living cationic polymerization of chloroalkylvinylethers and the subsequent modification of the polymer by the mesogenic groups. The liquid-crystalline polymers have a controlled degree of polymerisation and narrow molecular weight distributions. The influence on the mesomorphic properties of various parameters such as the degree of polymerization, the spacer length and the proportion of the mesogenic side chain content has been investigated. Binary phase diagrams with low molar mass analogues are also reported and the properties of both neat materials and binary mixtures are compared.     

Liquid crystalline main chain polymers with a poly(p-phenylene-terephthalate) backbone: 7. Thermal expansion of oriented films of the polyester with dodecyloxy side chains

The linear thermal expansion coefficients of oriented films of poly(p-phenylene-2,5-didodecyloxy-terephthalate) in the three structures B, A, and L_f are reported. The results are interpreted in terms of a molecular laminate model in which the rigid main-chain layers are separated by the aliphatic side chains. In a film oriented unidirectionally the rigid mainchain layers provide a negative contribution to the thermal expansion coefficient, while the side chains supply a positive contribution. Therefore, the resulting expansion coefficient α depends on the details of the main- and side-chain packing and low-temperature values between α = +0.3 × 10^?5 K^?1 (A and L_f and α = ?1.2 × 10^?5 K^?1 (B) are found in highly oriented films. Measurements on undrawn films are in accordance with the molecular laminate model. © 1994 John Wiley & Sons, Inc.     

Preparation and characterization of a novel poly(1,4-phenylenevinylene) derivative with an azobenzene side chain

A novel poly(1,4-phenylenevinylene) (PPV) derivative containing an azobenzene side chain was prepared via a dehydrochlorination route. Poly{2-methoxy-5-[(4-(4-methoxyphenylazo)phenyloxy)-hexyloxy]-1,4-phenylenevinylene}, which is soluble in ordinary solvents such as chloroform, tetrahydrofuran (THF), acetone, xylene, etc., was characterized by FTIR, ¹H NMR, GPC, and UV-visible spectroscopies, thermogravimetric analysis (TGA), and cyclic voltammetry. The photoluminescence spectrum of the polymer showed an emission maximum at λ = 550 nm.     

New side chain liquid crystalline polymers: synthesis and thermal properties of side chain polyacrylates having segmented spacers

In order to acquire high mobility of a mesogenic group, we propose a new type of side chain liquid crystal polymer having segmented spacers, consisting of binary moieties of an oligo(ethylene oxide) segment and analkylene segment. Six kinds of polyacrylates having segmented spacers consisting of different lengths of an oligo(ethylene oxide) and an alkylene, and having 4'-cyanobiphenyl as a mesogenic group have been synthesized, and their thermal properties investigated. Some of these polyacrylates exhibit a mesophase and show an extremely low glass transition temperature compared with LC polyacrylates having ordinary alkylene spacers.     

New side chain liquid crystalline polymers: synthesis and thermal properties of side chain polyacrylates having segmented spacers

In order to acquire high mobility of a mesogenic group, we propose a new type of side chain liquid crystal polymer having segmented spacers, consisting of binary moieties of an oligo(ethylene oxide) segment and analkylene segment. Six kinds of polyacrylates having segmented spacers consisting of different lengths of an oligo(ethylene oxide) and an alkylene, and having 4'-cyanobiphenyl as a mesogenic group have been synthesized, and their thermal properties investigated. Some of these polyacrylates exhibit a mesophase and show an extremely low glass transition temperature compared with LC polyacrylates having ordinary alkylene spacers.     

Poly(p-phenylenes) with well-defined side chain polymers

1,4-Dibromo-2,5-bis(bromomethyl)benzene and benzene-2,5-dibromomethyl-1,4-bis(boronic acid propanediol diester) were used as bifunctional initiators in Atom Transfer Radical Polymerization (ATRP) of styrene or in cationic ring opening polymerization (CROP) of tetrahydrofuran in conjunction with CuBr /2,2'-bipyridine or AgSbF₆, respectively. The resulting well-defined macromonomers with low polydispersities, bearing functional groups as bromine or boronic ester were used in Suzuki or Yamamoto type couplings, leading to poly(p-phenylene)s (PPPs) with polystyrene (PSt), polytetrahydrofuran (PTHF) or alternating PSt/PTHF side chains. The new polymers were characterized by GPC, ¹H-NMR, ¹³C-NMR, IR and UV analysis. Thermal behavior of the precursors PSt or PTHF macromonomers and the final polyphenylenes were investigated by TGA and DSC analyses and compared.     

Thiophene-based conjugated microporous polymers: synthesis,characterization and efficient gas storage

A series of thiophene-based conjugated microporous polymers(ThPOPs) have been synthesized on the basis of ferric chloride-catalyzed oxidative coupling polymerization of multi-thienyl monomers. The structures of ThPOPs were confirmed via solid-state 13 C CP/MAS NMR spectroscopy and Fourier-transform infrared spectroscopy. The ThPOPs possess high porosities and their high Brunauer-Emmett-Teller specific surface area results vary between 350 and 1320 m~2 g~(-1). The presence of abundant ultra-micropores at 0.50–0.63 nm allows ThPOPs efficient gas(carbon dioxide, methane, and hydrogen) adsorption.     

Toward stable interfaces in conjugated polymers: microporous poly(p-phenylene) and poly(phenyleneethynylene) based on a spirobifluorene building block

Conjugated polymer networks based on spirobifluorene building units exhibit defined photoluminescence as well as pronounced microporosity, that is, large, stable interfaces.     

Novel chiral poly(ester-imide)s with different natural amino acids in the main chain as well as in the side chain: synthesis and characterization

Several novel chiral and potentially biodegradable poly(ester-imide)s (PEI)s bearing natural amino acids in the main chain as well as in the side chain were synthesized via direct polyesterification of N,N'-(pyromellitoyl)-bis-(L-tyrosine dimethyl ester) as a biodegradable optically active phenolic diol and synthesized diacids containing different amino acids and phthalimide group in the side chain. With the aim of tosyl chloride/pyridine/N,N-dimethylformamide (DMF) system as a condensing agent under conventional heating condition, the new optically active PEIs were obtained in good yield and moderate inherent viscosity up to 0.35 dL/g. The obtained polymers were characterized with FT-IR, ¹H NMR, X-ray diffraction (XRD), elemental and thermogravimetric analysis (TGA) techniques. They are readily soluble in amide type solvents such as N,N-dimethylacetamide, DMF, 1-methyl-2-pyrrolidone, dimethyl sulfoxide, and protic solvents such as sulfuric acid. TGA showed that the 10% weight loss temperature in argon atmosphere was around 350 °C, which indicates that the resulting PEIs have a good thermal stability. The presence of amino acid in the PEIs architecture, not only cause to be used as optically active materials but also makes them susceptible to be biocompatible and biodegradable compound.     

Polarized optical spectroscopy applied to investigate two poly(phenylene-vinylene) polymers with different side chain structures

Two related poly(phenylene-vinylene) (PPV) light-emitting polymers have been investigated by means of polarized optical spectroscopy. The purpose of the investigation was to investigate the nature of the interactions in thin films and to examine what impact the difference in side chain structure and molecular weight in poly(2'-methoxy-5-2-ethyl-hexoxy)-1,4-phenylene vinylene (MEH-PPV) and poly(2-(3',7'-dimethyloctyloxy)-5-methoxy-1,4-phenylene-vinylene) (OC1C10-PPV) has on the electronic and optical properties of the two polymers. Aligning the polymers by dispersing them in anisotropic solvents and stretched films shows that the side chains have an impact on the relative orientations of the transition dipole moments. In anisotropic solvents the linear dichroism is larger for MEH-PPV than for the related polymer OC1C10-PPV, while in stretched films the opposite situation prevails. A lower polarization of the luminescence from OC1C10-PPV, relative to MEH-PPV, was also obtained independent of alignment medium used. The data therefore suggest that while mechanical stretching may align the OC1C10-PPV to a greater degree, the emitting species is distinct from the absorbing species. The circular dichroism (CD) spectra of both polymers undergo dramatic changes when the liquid phase and the solid state (film) are compared. The solution CD spectra shows no evidence of interchain interactions; instead the spectra of both systems indicate a helical conformation of the polymers. The CD spectra of films are dramatically different with the strong Cotton effect being observed. This points to the formation of an aggregate in the film, with an associated ground state interaction, an interchain species such as a physical dimer, or a more complex higher aggregate.     

Preparation and characterization of polymers with oxadiazole on the side chain

Three styrene-type monomers having an oxadiazole group were prepared. The monomers were polymerized by a radical initiator into high molecular weight polymer. Polymers were soluble in many organic solvents such as chloroform, benzene and tetrahydrofuran. Polymer films were amorphous and transparent and showed no change after several months of preparation. The polymer had two reduction potentials around −2 V versus Ag/AgCl electrode. The polymer film dispersed with N,N,N′, N-tetraphenyldiaminobiphenyl (TPD) showed electroluminescence due to the exciplex with TPD. © 1997 John Wiley & Sons, Ltd.     

Donor-acceptor polymers: a conjugated oligo(p-phenylene vinylene) main chain with dangling perylene bisimides

Two new donor-acceptor copolymers that consist of an enantiomerically pure oligo(p-phenylene vinylene) main chain with dangling perylene bisimides have been synthesized by using a Suzuki cross-coupling polymerization. Absorption and circular dichroism spectroscopy revealed that the transition dipole moments of the donor in the main chain and the dangling acceptor moieties of the copolymers are coupled and in a helical orientation in solution, even at elevated temperatures. A strong fluorescence quenching of both chromophores indicates an efficient photoinduced charge transfer after photoexcitation of either donor or acceptor. The formation and recombination kinetics of the charge-separated state were investigated in detail with femtosecond and near-steady-state photoinduced absorption spectroscopy. The charge-separated state forms within 1 ps after excitation, and recombination occurs with a time constant of 45-60 ps, both in solution and in the solid state. These optical characteristics indicate a short distance and appreciable interaction between the electron-rich donor chain and the dangling electron-poor acceptor chromophores.     

The first soluble conjugated poly(2,6-anthrylene): synthesis and properties

The first soluble conjugated poly(2,6-anthrylene) with 9,10-diphenyl-anthracene as the repeating unit is reported; photophysical studies reveal that this polymer represents a novel well-conjugated system.     

Superacid polymers from sulfonated poly(styrene-divinylbenzene): Preparation and characterization

Superacid polymers were prepared by bringing metal halides (AlCl₃, SnCl₄, TiCl₄, BF₃, or SbF₅) in contact with macroporous sulfonic acid resins [sulfonated, crosslinked poly(styrene-divinylbenzene)]. The resulting solids were characterized by chemical analysis, temperature-programmed desorption, transmission electron microscopy, and X-ray photoelectron spectroscopy. They were also tested as catalysts for n-butane isomerization at 0.5 bar and 60 to 120°C. The polymers consist of supported metal oxyhalide particles, complexes of metal oxyhalides and sulfonate groups, and the remaining unreacted sulfonic acid groups. In the presence of HCl, these polymers were highly active catalysts for the butane isomerization reaction, the activity being a consequence of a high proton-donor strength inferred to be associated with H₂Cl⁺ groups stabilized on the polymer surface by negative charge delocalization over sulfonate–metal oxyhalide sulfonate groups.     

Design and synthesis of Ru(II-bipyridyl-containing conjugated polymers

A series of novel π-conjugated polymers containing ruthenium bipyridine complexes was synthesized by a cross-coupling reaction and characterized. These polymers exhibit absorption maxima around 330–350 nm (π-π*) and 460–500 nm metal-to-ligand charge transfer (MLCT), respectively. They are soluble in common organic solvents, and all polymers can be converted into transparent films. We investigated the influence of different donating and acceptor diethynylarenes of the ultraviolet-visible spectra. The oxidation potential, which was measured by cyclic- and square-wave voltametry, showed a typical Ru^2+/3+ exhibited at 1.25 V versus the saturated calomel electrode. The polymers were further characterized with photoluminescence measurements. When excited at 442 nm ( 11a ), the polymer exhibited an emission peak at 690 nm. This peak was attributed to the MLCT states. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 722–732, 2004