Highly efficient new indoline dye having strong electron-withdrawing group for zinc oxide dye-sensitized solar cell

New indoline dye (DN319) having strong electron-withdrawing dicyanovinylidene moiety and octyl group in the terminal rhodanine ring gave higher efficiency than D205, which was known as an excellent organic dye sensitizer. This result is attributed to the bathochromic shift in the UV-vis absorption band and positive shift in the E_ox level of DN319.     

Structural engineering of dipolar organic dyes with an electron-deficient diphenylquinoxaline moiety for efficient dye-sensitized solar cells

A series of new organic dyes containing an electron-deficient diphenylquinoxaline moiety was synthesized and employed as the photosensitizers in dye-sensitized solar cells (DSSCs). The multiple phenyl rings in the peripheral positions of the dye structure provide a hydrophobic barrier to slow down the charge recombination. The photophysical and electrochemical properties of these dyes were investigated in detail. The cell performance and the associated photophysical and electrochemical properties can be easily tuned by the modification of the aromatic fragments within the π spacer. Dye CR204-based DSSC reached the best energy conversion efficiency of 6.49% with an open-circuit voltage of 666 mV, a short-circuit photocurrent density of 14.9 mA cm⁻², and a fill factor of 0.66. The IPCE of CR204-based DSSC covers the light-harvesting to NIR region.     

Recent advances in phenothiazine-based dyes for dye-sensitized solar cells

Dye-sensitized solar cells(DSSCs) have attracted significant attention as alternatives to conventional silicon-based solar cells owing to their low-cost production,facile fabrication,excellent stability and high power conversion efficiency(PCE).The dye molecule is one of the key components in DSSCs since it significant influence on the PCE,charge separation,light-harvesting,as well as the device stability.Among various dyes,easily tunable phenothiazine-based dyes hold a large proportion and achieve impressive photovoltaic performances.This class of dyes not only has superiorly non-planar butterfly structure but also possesses excellent electron donating ability and large π conjugated system.This review summarized recent developments in the phenothiazine dyes,including small molecule phenothiazine dyes,polymer phenothiazine dyes and phenothiazine dyes for co-sensitization,especially focused on the developments and design concepts of small molecule phenothiazine dyes,as well as the correlation between molecular structures and the photovoltaic performances.     

Metal-free organic dyes with benzothiadiazole as an internal acceptor for dye-sensitized solar cells

We synthesized three metal-free organic dyes (H11–H13) consisting of a 3,6-disubstituted carbazole, benzothiadiazole, and cyanoacrylic acid. All the dyes exhibited high molar extinction coefficients and suitable energy levels for electron transfer from the electrolyte to the TiO₂ nanoparticles. Under standard AM 1.5G solar irradiation, the device using dye H13 with co-adsorbed chenodeoxycholic acid (CDCA) displayed the best performance: an open-circuit voltage (V_oc) of 0.71 V, a short-circuit current density (J_sc) of 12.69 mA cm⁻², a fill factor (FF) of 0.71, and a power conversion efficiency (PCE) of 6.32%. The PCE was ∼79% of that for commercially available N719 cells (8.02%) under the same conditions.     

Novel indoline dye tetrabutylammonium carboxylates attached with a methyl group on the cyclopentane ring for dye-sensitized solar cells

(2R,3aR,8bR)- and (2S,3aS,8bS)-2-Methyl indoline dye tetrabutylammonium carboxylates exhibited the highest conversion efficiency among four regio and stereo isomers. These indoline dyes also showed higher conversion efficiency than DN350.     

Fluorenylvinylenes bridged triphenylamine-based dyes with enhanced performance in dye-sensitized solar cells

We have synthesized a series of new dipolar organic dyes Bn (n=0, 1, 2) employing triarylamine as the electron-donor, 2-cyanoacrylic acid as the electron-acceptor, and fluorenevinylene as the conjugated bridge, which were used as sensitizers in dye-sensitized solar cells. It is found that the solar-energy-to-electricity conversion efficiencies of the prepared DSSCs are in the range of 2.79-5.56%, which reach 35-70% of a standard device based on N719 fabricated and measured under the same conditions. The DSSC sensitized with B1 with balanced length of conjugated bridge shows the highest photo-to-electrical energy conversion efficiency and the open-circuit photovoltage (V_oc) of 0.86 V.     

Synthesis and applications of novel acceptor-donor-acceptor organic dyes with dithienopyrrole- and fluorene-cores for dye-sensitized solar cells

Four novel symmetrical organic dyes (S1-S4) configured with acceptor-donor-acceptor (A-D-A) structures containing electron donating fluorene (S1 and S2) and N-alkyl dithieno[3,2-b:2′,3′-d]pyrrole (DTP) (S3 and S4) cores terminated with two anchoring cyanoacrylic acids (as electron acceptors) were synthesized and applied to dye-sensitized solar cells (DSSCs). The DSSC device based on S2 dye showed the best photovoltaic performance among S1-S4 dyes: a maximum monochromatic incident photon-to-current conversion efficiency (IPCE) of 76%, a short circuit current (J_SC) of 12.27 mA/cm², an open circuit voltage (V_OC) of 0.61 V, a fill factor (FF) of 0.63, and an overall power conversion efficiency (η) of 4.73%. Besides, the utilization of chenodoxycholic acid (CDCA) as a co-adsorbent in the DSSC device based on S3 dye showed a significant improvement in its η value (from 3.70% to 4.31%), which is attributed to the suppression of dye aggregation on TiO₂ surface and thus to increase the J_SC value eventually.     

Improvement of dye-sensitized solar cells' performance via co-sensitization of new azo thiazole organic dyes with ruthenium (II) based N-719 dye

Three novel azo thiazole organic dyes, NA-1–3, have been synthesized and utilized as co-sensitizers in dye-sensitized solar cells (DSSCs). These co-sensitizers were designed with a thiazole ring π-bridge that mediates between the diazo (–N = N–) functional group and carboxylic acid anchoring unit. They possess a rod-like molecular structure and exhibit strong UV–vis absorption near 600 nm. Co-sensitization studies were also conducted with the ruthenium complex N719. The co-sensitized DSSCs showed enhanced short-circuit and open-circuit photocurrents (Jsc) and voltages (Voc), resulting in more efficient photovoltaic performance compared to N719 (PCE 7.25%). Electrochemical impedance spectroscopy (EIS) and incident photon to current efficiency (IPCE) were employed to investigate the underlying reasons for these improvements. It was found that co-sensitization effectively reduced electron recombination, resulting in a higher Voc without compromising photocurrent loss.     

Synthesis of mesoporous TiO2 with colloidal gas aphrons,colloidal liquid aphrons,and colloidal emulsion aphrons for dye-sensitized solar cells

High surface area mesoporous titanium dioxide (TiO₂) particles have been prepared by three different kinds of colloidal aphrons: colloidal gas aphrons, colloidal liquid aphrons, and colloidal emulsion aphrons (CEAs). The precipitate of amorphous TiO₂ was prepared by hydrolysis, condensation, and polycondensation reaction of the precursor. The reaction took place under the effect of coulombic repulsion and electrostatic layers of multilayer surfactant molecules. TiO₂ particles with various sizes were prepared with different molar ratio of titanium ion to surfactants, which were sodium lauryl sulfate (SDS), cetyltrimetyhlammonium bromide, triblock copolymer Pluronic P123, and triblock copolymer Pluronic F127. The synthesized samples were characterized by X-ray diffraction, Brunauer-Emmett-Teller analysis, N₂ adsorption/desorption, and transmission electron microscopy. The mesoporous TiO₂ prepared by CEAs method showed a high specific surface area of 224 m²/g with the total pore volume of 0.7751 cm³/g by using SDS as the membrane phase surfactant due to electrostatic attraction favors of anionic surfactant. The solar conversion efficiency of the cell made from TiO₂ increases with the combination of increased surface area and total pore volume for higher amount of dye wetting and loading.