Studies on structural requirements for atropisomerism in N-phenyl γ-lactams

We prepared a series of substituted N-phenyl γ-lactams to investigate the structural requirements for forming atropisomers. NMR spectroscopic and X-ray crystallographic data as well as chiral HPLC analyses proved that ortho-F, Cl-disubstituted N-phenyl γ-lactams (i.e., RS-4 and SS-4) yielded separable atropisomers. Computational studies using the conformational data derived from crystal structures showed that conformational variations in the γ-lactam ring had negligible impacts on the rotational barriers of the N-phenyl group around the central CN bond. Atropisomerism in N-phenyl γ-lactams was depended solely on the steric interactions between bulky ortho-substituents on the N-phenyl group and the adjacent CH₂ and CO groups in the γ-lactam.     

Phosphinate selective hosts and importance of CH hydrogen bonding for affinity modulation toward anion guests

Even though phosphinate and its analogs are very important guests in nature, the artificial receptors which are capable of selective recognition of phosphinate are rare. Here, we report a series of acetate and phosphinate selective hosts (1, 2 and 3) which utilize amide NH and aliphatic CH groups as hydrogen bonding donors. In this series of receptors, even though the amide NH hydrogen bonding element was found to be the most significant, by varying the polarity of CH group, the magnitude of recognition could be modulated considerably. The affinities of host 3 against all the tested anion guests showed significantly higher affinities compared with those of hosts 1 and 2, and this could be attributed to the difference of CH group polarities among the receptors 1, 2 and 3. C_α-H hydrogen in host 3 is the most highly polarized by the charged pyridinium group. Therefore, it is the strongest host in this series of hosts. From the experiments shown here, we demonstrated the importance of CH hydrogen bonding element as a decisive modulating moiety for anionic recognition.     

Diastereo- and enantioseparation of a N-Boc amino acid with a zwitterionic quinine-based stationary phase: Focus on the stereorecognition mechanism

A chiral chromatography method enabling the simultaneous diastereo- and enantioseparation of N^α-Boc-N⁴-(hydroorotyl)-4-aminophenylalanine [Boc-Aph(Hor)-OH, 1] was optimized with a quinine-based zwitterionic stationary phase. The polar-ionic eluent system consisting of ACN:MeOH:water—49.7:49.7:0.6 (v/v/v) with formic acid (4.0 mM) and diethylamine (2.5 mM), allowed the successful separation of the four acid stereoisomers: α_d,d-/d,l-1 = 1.08; α_d,l-/l,d-1 = 1.08; α_l,d-/l,l-1 = 1.40.     

Efficient acid catalytic synthesis of pyrazolopyrimidines from 1H-pyrazol-5-yl-N,N-dimethylformamidines with cyanamide

The efficient acid catalytic synthesis of pyrazolo [3,4-d]pyrimidine was developed by treating 1H-pyrazol-5-yl-N,N-dimethylformamidine with various aminating agents including N,O-bis(trimethylsilyl)hydroxylamine (NHSiMe₃(OSiMe₃)), cyanamide (NH₂CN), hydroxylamine (NH₂OH), methoxyamine (NH₂OMe), hydrazine (NH₂NH₂), and urea (NH₂C(O)NH₂) in acidic solution at reflux. Based on the experimental result, cyanamide (NH₂CN) and methanesulfonic acid were indicated the best aminating agent and acid mediated solvent. On the other hands, the reactivity tendency was involved the activity of original leaving species grafting on the aminating agents, such as –OH, –OMe, –OSiMe₃, –NH₂, –OSiMe₃, –C(O)NH₂, and –CN, in acid catalytic heterocyclic reaction.     

Synthesis and characterization of some novel cadmium(II) complexes with 3-hydroxypicolinic acid (3-OHpicH): Crystal and molecular structures of [CdI(3-OHpic)(3-OHpicH)(H2O)]2, [Cd(3-OHpic)2(H2O)2] and [Cd(3-OHpic)2]n

Cadmium(II) complexes of 3-hydroxypicolinic acid, namely [CdI(3-OHpic)(3-OHpicH)(H₂O)]₂ (1), [Cd(3-OHpic)₂(H₂O)₂] (2) and [Cd(3-OHpic)₂]_n (3) were prepared and characterized by spectroscopic methods (IR, NMR) and their molecular and crystal structures were determined by X-ray crystal structure analysis. Complexes 1 and 2 were prepared in similar reaction conditions using different cadmium(II) salts: cadmium(II) iodide and cadmium(II) acetate dihydrate, respectively, while 3 was prepared by recrystallization of 2 from N,N-dimethylformamide solution. Various coordination modes of 3-OHpicH in 1–3 were established in the solid state: bidentate N,O-chelated mode in 1 and 2, monodentate mode through the carboxylate O atom from zwitterionic ligand in 1 and bidentate N,O-chelated and bridging mode in 3. In the DMF solution of all prepared complexes, only monodentate mode of 3-OHpicH binding to cadmium(II) through the carboxylate O atom was established by ¹H, ¹³C, ¹⁵N and ¹¹³Cd NMR spectroscopy.     

Silver N-heterocyclic carbene complexes as initiators for bulk ring-opening polymerization (ROP) of l-lactides

Synthetic, structural and catalysis studies of two silver complexes namely, {[1-(2,4,6-trimethylphenyl)-3-(N-phenylacetamido)imidazol-2-ylidene]₂Ag}⁺Cl⁻1b, supported over an amido-functionalized N-heterocyclic carbene ligand, and [1-(i-propyl)-3-(benzyl)imidazol-2-ylidene]AgCl 2b, supported over a non-functionalized N-heterocyclic carbene ligand, are reported. Specifically, 1b, a cationic complex bearing 2:1 NHC ligand to metal ratio, was obtained from the reaction of 1-(2,4,6-trimethylphenyl)-3-(N-phenylacetamido)imidazolium chloride 1a with Ag₂O in 52% yield. The corresponding 1a was synthesized by the alkylation reaction of 1-(2,4,6-trimethylphenylimidazole) with N-phenyl chloroacetamide in 73% yield. The other silver complex 2b, a neutral complex bearing 1:1 NHC ligand to metal ratio, was obtained from the reaction of 1-(i-propyl)-3-(benzyl)imidazolium chloride 2a with Ag₂O in 42% yield. The 2a was synthesized by the alkylation reaction of 1-(i-propylimidazole) with benzyl chloride in 45% yield. The molecular structures of the imidazolium chloride, 1a, and the silver complexes, 1b and 2b, have been determined by X-ray diffraction studies. The silver complexes, 1b and 2b, successfully catalyze bulk ring-opening polymerization (ROP) of l-lactides at elevated temperatures under solvent-free melt conditions producing moderate to low molecular weight polylactide polymers having narrow molecular weight distributions.     

Synthesis, characterization and crystal structures of cyclometallated palladium (II) compounds containing difunctional ligands with [P,P], [As,As], [N,N], [P,As], [P,N] and [P,O] donor atoms

Treatment of the chloro-bridged dinuclear complex [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}(μ-Cl)]₂ (1) with homobidentate [P,P], [As,As], [N,N], and heterobidentate [P,As], [P,N] ligands in a 1:1 molar ratio gave the dinuclear complexes [{Pd[3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N](Cl)}₂{μ-L}] (L = Ph₂PC₄H₆(NH)CH₂PPh₂ (2); Ph₂As(CH₂)₂AsPh₂ (3); 1,3-(NH₂CH₂)₂C₆H₄ (4); Ph₂P(CH₂)₂AsPh₂ (5); Ph₂P(CH₂)₂NH₂ (6)), with the bidentate ligands bridging the two cyclometallated fragments.The reaction with the homobidentate ligands in a 1:2 molar ratio in the presence of NaClO₄ afforded the mononuclear compounds [[Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{L-P,P}][ClO₄] (L = Ph₂PC₄H₆(NH)CH₂PPh₂ (7); (o-Tol)₂P(CH₂)₂P(o-Tol)₂ (8)), [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{Ph₂As(CH₂)₂AsPh₂-As,As}][ClO₄] (9) and [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{L-N,N}][ClO₄] (L = NH₂(CH₂)₃NH₂ (10); NH₂(C₆H₈)CH₂(C₆H₈)NH₂ (11); 1,3-(NH₂CH₂)₂C₆H₄ (12); 1,3-(NH₂)₂C₅H₃N (13); NH₂(C₆H₄)O(C₆H₄)NH₂ (14); NMe₂(CH₂)₂NMe₂ (15)), in which the chloro ligands are absent and the bidentate ligands are chelated to the palladium atom.Reaction of 1 with Ph₂P(CH₂)₂AsPh₂ in 1:2 molar ratio in acetone in the presence of NH₄PF₆ afforded the analogous mononuclear compound [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{Ph₂P(CH₂)₂AsPh₂-P,As}][PF₆] (16); whereas reaction with Ph₂P(CH₂)₃NH₂ gave [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{Ph₂P(CH₂)₃N(CMe₂)-P,N}][PF₆] (17), derived from intermolecular condensation between the aminophosphine and acetone. Condensation of the NH₂ group was precluded by change of solvent, using dichloromethane.Iminophoshines also reacted with 1 in 1:2 molar ratio in acetone to give a new series of mononuclear cyclometallated complexes: [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{L-P,N}][ClO₄] (L = Ph₂PC₆H₄C(H)NCy (20); Ph₂PC₆H₄C(H)NC(CH₃)₃ (21); Ph₂PC₆H₄C(H)NNMe₂ (22); Ph₂PC₆H₄C(H)NNHMe (23); Ph₂PC₆H₄C(H)NNHPh (24)). Analogous complexes with a stable P,O-chelate were obtained using bidentate [P,O] donor ligands: [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{L-P,O}][Cl] (L = 2-(Ph₂P)C₆H₄CHO (25); Ph₂PN(Me)C(O)Me (26)).The crystal structures of compounds 1, 5, 15, 16, 18, 20 have been determined by X-ray crystallography.     

N-Acetyl-N,N-dipyrid-2-yl (cyclooctadiene) rhodium (I) and iridium (I) complexes: Synthesis, X-ray structures, their use in hydroformylation and carbonyl hydrosilylation reactions and in the polymerization of diazocompounds

The synthesis of novel N-acetyl-N,N-dipyrid-2-yl complexes of Rh^I and Ir^I, i.e. [RhCl(CH₃CONPy₂)(COD)] (1) and [IrCl(CH₃CONPy₂)(COD)] (2), respectively, is described. Upon prolonged treatment in CH₂Cl₂ at room temperature, complex 1 is transformed into a cationic Rh-complex, i.e. [Rh(CH₃CONPy₂)(COD)⁺RhCl₂(COD)⁻] (1a). Compound 1a crystallizes in the monoclinic space group P2₁/c, complex 2 crystallizes in the triclinic space group . Compound 1 was investigated for its catalytic activity in the hydroformylation of cyclooctene as well as of 1-octene. In addition, 1 was used in various carbonyl hydrosilylation reactions of both aldehydes and ketones. There, turn-over numbers up to 50 000 and yields in the range of 85-100% were observed. Finally, compound 1 was successfully used for the polymerization of N₂CHCOOEt yielding highly stereoregular poly(ethoxycarbonylcarbene) with M_w = 67 000 g/mol and a polydispersity index (PDI) of 2.59.     

Reactivity of 2,3-bis(2-pyridyl)pyrazine with [Re2(CO)8(CH3CN)2]: Molecular structures of [Re2(CO)8(C14H10N4)] and [Re2(CO)8(C14H10N4)Re2(CO)8]

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re₂(CO)₈(C₁₄H₁₀N₄)] (1 and 2), and the complex [Re₂(CO)₈(C₁₄H₁₀N₄)Re₂(CO)₈] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)₃ fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by ¹H NMR (−50 °C, CD₃COCD₃), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)₃ fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re₂(CO)₆(C₁₄H₁₀N₄)₂] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.     

Visible light mediated aerobic photocatalytic activation of CH bond by riboflavin tetraacetate and N-hydroxysuccinimide

A green and highly efficient cooperative photocatalytic system which consists of riboflavin tetraacetate (RFT), N-hydroxysuccinimide (NHS) and FeCl₃·6H₂O has been developed for CH bond oxygenation with visible light under mild reaction conditions. Compared to the previous procedures about CH bond activation by using flavins as photocatalyst, we use cheap ferric chloride and NHS instead of expensive scandium triflate or biomimetic non-heme iron complex, further expand the substrate scopes. In addition, a possible radical mechanism for the CH bond oxygenation in this photocatalytic system is proposed.     

Effect of ketimide ligand for ethylene polymerization and ethylene/norbornene copolymerization catalyzed by (cyclopentadienyl)(ketimide)titanium complexes-MAO catalyst systems: Structural analysis for CpTiCl2(NCPh2)

Ligand effects on the catalytic activity [and norbornene (NBE) incorporation] for both ethylene polymerization and ethylene/NBE copolymerization using half-titanocenes (titanium half-sandwich complexes) containing ketimide ligand of type Cp′TiCl₂[NC(R¹)R²] [Cp′ = Cp (1), C⁵Me⁵ (Cp^∗, 2); R¹,R² = ^tBu,^tBu (a), ^tBu,Ph (b), Ph,Ph (c)]-methylaluminoxane (MAO) catalyst systems have been investigated. CpTiCl₂[NC(^tBu)Ph] (1b) CpTiCl₂(NCPh₂) (1c), and Cp^∗TiCl₂(NCPh₂) (2c) were prepared and identified; the structure of Cp^∗TiCl₂(NCPh₂) (2c) was determined by X-ray crystallography. The catalytic activity for ethylene polymerization increased in the order: 1a > 1b > 1c, suggesting that an electronic nature of the ketimide ligand affects the activity. However, molecular weight distributions for resultant (co)polymers prepared by 1b,c and by 2c-MAO catalyst systems were bi- or multi-modal, suggesting that the ketimide substituent plays a key role in order for these (co)polymerizations to proceed with single catalytically-active species. CpTiCl₂(NC^tBu₂) (1a) exhibited both remarkable catalytic activity and efficient NBE incorporation for ethylene/NBE copolymerization.     

Synthesis and structural characterization of three copper coordination polymers with pyridine derivatives from hydro(solvo)thermal in situ decarboxylation reactions of 2,5-dicarboxylpyridine

The hydro(solvo)thermal self-assembles of CuI, KI and 2,5-dicarboxylpyridine [2,5-(COOH)₂py] in different molar ratios in H₂O/alcohol solutions produced three Cu coordination polymers as 2-D [N-C₂H₅py][Cu₃I₄] 1, 1-D [N-CH₃py][Cu₂I₃] 2 as well as 1-D [Cu(2-COOpy)₂]H₂O 3 (N-C₂H₅py=N-ethylpyridine, N-CH₃py=N-methylpyridine, 2-COOpy=2-carboxylpyridine). N-C₂H₅py in 1 and N-CH₃py in 2 derived from the solvothermal in situ simultaneous decarboxylation and N-alkylation reactions of 2,5-(COOH)₂py. The semi-decarboxylation reaction of 2,5-(COOH)₂py into 2-COOpy occurred in the preparation of 3. X-ray single-crystal analysis revealed that CuI is transformed into a 2-D [Cu₃I₄]⁻ layer in compound 1 and a 1-D chain in compound 2, templated by [N-C₂H₅py]⁺ and [N-CH₃py]⁺, respectively. Compound 3 is a divalent Cu compound. The Cu(II) centers with a 4+2 geometry are coordinated by μ₃-mode 2-COOpy ligands. All of the title compounds were characterized by CHN analysis, IR spectrum analysis and TG analysis. Compounds 1 and 2 exhibit fluorescence properties with the maximum emissions at 581 nm for 1 and 537 nm for 2.     

Further studies of tetrakis(N,N′-dialkylbenzamidinato)diruthenium(III) chloro and alkynyl compounds: molecular engineering of metallayne monomers

Three diruthenium(III) compounds Ru₂(L)₄Cl₂, where L is mMeODMBA (N,N′-dimethyl-3-methoxybenzamidinate, 1a), DiMeODMBA (N,N′-dimethyl-3,5-dimethoxy benzamidinate, 1b), or DEBA (N,N′-diethylbenzamidinate, 1c), were prepared from the reactions between Ru₂(OAc)₄Cl and respective HL under reflux conditions. Metathesis reactions between 1 and LiC₂Y resulted in bis-alkynyl derivatives Ru₂(L)₄(C₂Y)₂ [Y=Ph (2), SiMe₃ (3), SiⁱPr₃ (4) and C₂SiMe₃ (5)]. The parent compounds 1 are paramagnetic (S=1), while bis-alkynyl derivatives 2-5 are diamagnetic and display well-solved ¹H- and ¹³C-NMR spectra. Molecular structures of compounds 1b, 1c, 2c, 3c and 4b were established through single crystal X-ray diffraction studies, which revealed RuRu bond lengths of ca. 2.32 Å for parent compounds 1 and 2.45 Å for bis-alkynyl derivatives. Cyclic voltammograms of all compounds feature three one-electron couples: an oxidation and two reductions, while the reversibility of observed couples depends on the nature of axial ligands.     

ESR and pH-potentiometric study of the mixed-ligand complex formation in the copper(II)-4-fluorosalicylic acid-N,N-diethylnicotinamide system: Structure and spectral properties of [Cu(4-fluorosalicylate)2(N,N-diethylnicotinamide)2(H2O)2] complex

EPR simulation method together with pH-potentiometry combined with UV-Vis spectrophotometry were used for the study of the ternary system 4-fuorosalicylic acid (HA)-N,N-diethylnicotinamide (B)-copper(II) in aqueous solution. The N,N-diethylnicotinamide ligand is a weak donor, its mixed-ligand complexes with 4-fluorosalicylate anions are more favoured. The number of coordinated N,N-diethylnicotinamide molecules increases with decreasing temperature: up to four ones were detected in the coordination sphere of copper(II) in frozen solutions. The formation of [CuH₋₁AB₂] and [CuH₋₁A] was detected by all methods at neutral pH. At lower pH values, [CuA₂B₂] and [CuB] become dominant, and this fact is in good agreement with [CuA₂B₂(H₂O)₂] crystals obtained from similar solutions. The structural unit of the [CuA₂B₂(H₂O)₂] complex consists of a copper(II) ion, which is monodentately coordinated by a pair of 4-fluorosalicylate anions and by a pair of N,N-diethylnicotinamide in trans positions in the basal plane, and by two water molecules in the axial positions of a tetragonal bipyramid.     

N-phosphanylamidine ligands and their catalytic activity in the hydroformylation of 1-octene and styrene

Pyridine-based N-phosphanylamidine ligands i-Pr₂N-C(pyr)N-PR₂ (R = Ph (3), i-Pr (4)) were synthesized and fully characterized by NMR spectroscopy and X-ray crystallography. Mononuclear rhodium complexes 7 and 8 were obtained in one step from the [RhCl(COD)]₂ dimer and the monodentate ligands 1 and 2. Their single-crystal X-ray diffraction studies revealed the structural adaptive behavior of the monodentate N-phosphanylamidine ligands 1 and 2 upon k¹-P coordination mode in rhodium(I) complexes with the imino nitrogen atom of the amidine function which behaves as a “universal joint”. Compounds 1-4 were evaluated as ligands in the 1-octene and styrene hydroformylation reactions. The results obtained are encouraging and represent the first report on the use of N-phosphanylamidine ligands of the type R″₂N-C(R′)N-PR₂ in catalytic reactions.     

Synthesis and characterization of two new open-framework zinc phosphites [M(C6N4H18)][Zn3(HPO3)4] (M=Ni, Co) with multi-directional intersecting 12-membered ring channels

Two new open-framework zinc phosphites, [M(C₆N₄H₁₈)][Zn₃(HPO₃)₄] (M=Ni, Co), have been prepared under hydrothermal conditions. Single-crystal X-ray diffraction analysis shows that [Ni(C₆N₄H₁₈)][Zn₃(HPO₃)₄] (1) and [Co(C₆N₄H₁₈)][Zn₃(HPO₃)₄] (2) are isostructural and both crystallize in the monoclinic space group C2/c with , , , β=109.83(3)°, Z=4, R₁=0.0408 (I>2σ(I)), and wR₂=0.1104 (all data) for 1, and , , , β=109.328(2)°, Z=4, R₁=0.0380 (I>2σ(I)), and wR₂=0.1093 (all data) for 2. The structures of 1 and 2 are built up from strictly alternating ZnO₄ tetrahedra and HPO₃ pseudo-pyramids linked through oxygen vertices to form the three-dimensional (3-D) open-frameworks with multi-directional intersecting 12-membered ring (12-MR) channels. The M(TETA) (M=Ni, Co) complexes self-assembled under hydrothermal system connect with the inorganic host via M-O-P linkages and interact with inorganic framework through weak H-bonds. The two compounds show intense photoluminescence upon photoexcitation at 235 nm.     

Complexes derived from the copper(II)/succinamic acid/N,N′,N″-chelate tertiary reaction systems: Synthesis,structural and spectroscopic studies

The use of succinamic acid (H₂sucm) in Cu^II/N,N′,N″-donor [2,2′:6′,2″-terpyridine (terpy), 2,6-bis(3,5-dimethylpyrazol-1-yl)pyridine (dmbppy)] reaction mixtures yielded compounds [Cu(Hsucm)(terpy)]_n(ClO₄)_n (1), [Cu(Hsucm)(terpy)(MeOH)](ClO₄) (2), [Cu₂(Hsucm)₂(terpy)₂](ClO₄)₂ (3), [Cu(ClO₄)₂(terpy)(MeOH)] (4), [Cu(Hsucm)(dmbppy)]_n(NO₃)_n·3nH₂O (5^.3nH₂O), and [CuCl₂(dmbppy)]·H₂O (6·H₂O). The succinamate(−1) ligand exists in four different coordination modes in the structures of 1–3 and 5, i.e., the μ₂-κO:κO′:κO″ in 1 and 5 which involves asymmetric chelating coordination of the carboxylato group and ligation of the amide O-atom leading to 1D coordination polymers, the μ₂-κ²O:κO′ in 3 which involves asymmetric chelating and bridging coordination of the carboxylato group, and the asymmetric chelating mode in 2. The primary amide group, either coordinated in 1 and 5, or uncoordinated in 2 and 3, participate in hydrogen bonding interactions, leading to interesting crystal structures. Characteristic IR bands of the complexes are discussed in terms of the known structures and the coordination modes of the Hsucm⁻ ligands. The thermal decomposition of complex 5·3nH₂O was monitored by TG/DTG and DTA measurements.     

Study the reactions of fluoroalkanesulfonyl azides with N-alkylindoles

The reactions of fluoroalkanesulfonyl azides R_fSO₂N₃1 with N-alkylindoles 2 have been studied in detail. It was found that both solvent and the amount of the azides seriously affected the product distribution. 1 reacted with equimolar of 2 in ether or 1,4-dioxane affording 2-(N-substituted-indolinylidene)fluoroalkane sulfonylimines 3 as major product; While, treatment of 2 with 2 equiv. of 1 in ethanol, an unexpected product N-substituted-2-fluoroalkanesulfonimino-3-diazo-indolines 4 were obtained in good yield. The reaction mechanism was discussed.